Phase transitions and electrical properties of CsH(SO4)0.76(SeO4)0.24 mixed crystals

The study by X-ray diffraction, calorimetry, vibrational and impedance spectroscopy of CsH(SO₄)_0.76(SeO₄)_0.24 new solid solution is presented. Crystals of this composition undergo two phase transitions at T = 333 and 408 K. The last one at 408 K is a superionic-protonic transition (SPT) related to a rapid [HS(Se)O₄⁻] reorientation and fast H⁺ diffusion. A sudden jump in the conductivity plot confirms the presence of this transition. Above 408 K, this high temperature phase is characterized by high electrical conductivity (7 × 10^t-3 Ω⁻ cm⁻¹) and low activation energy (E_a < 0.3 eV).     

Neutral-pion production in central collisions of relativistic C and Ar on Pb

The production of π⁰ mesons in central collisions of ¹²C and ⁴⁰Ar on ²⁰⁸Pb has been examined at a number of energies from 1. to 2.1 GeV/N, as part of the first systematic study as a function of beam energy and charged-particle multiplicity of the rate of neutral-pion production in relativistic heavy-ion collisions. For comparison, corresponding π^± data acquired with the same detector system have also been presented. The results indicate that, for a given target-projectile combination, both neutral- and charged-pion production increase smoothly by a factor of approximately 2.9 in this energy range. The measurement of charged-particle multiplicity is discussed in order to indicate how the characteristic distributions observed in this study were used to parameterize the experimental results. The average multiplicity of both pions and nucleons projected from these data is found to disagree with statistical models of particle production. The significance of the N_π^±/N_charge and N_π^±/N_π⁰ ratios observed as a function of beam energy and charged-particle multiplicity is discussed in the context of understanding the nature of the collision process.     

Tests of second-class currents

We argue that the presence of second-class neutral currents can be tested from the observations of and electron polarisation in η→π⁰e⁺e^-. Consequences of this model in η→π^±eν_e,τ^±→ηπ^±ν_τ and τ^±→ωπ^±ν_τ decays which would establish second-class charged currents are also discussed.     

A search for charged Higgs bosons at tristan

We searched for pair production of charged Higgs bosons via e⁺e⁻ annihilation, using data (23.3 pb⁻) collected by the TOPAZ detector in the energy range . We observed no evidence for charged Higgs pair production and extended the excluded region in the M_H^±---BR (hadron) plane. The 95% CL lower mass limit is the most stringent for BR (hadron) = 0.6, giving m_H^±<22 GeV.     

Tuning the multiferroic properties of Pb(Fe1/2Nb1/2)O3 by cationic substitution

A series of substituted lead iron niobate compounds with the general formula Pb²⁺_(1−x)A^Z_x(Fe_{{(1−(2−Z)x)/2}}Nb_{{(1+(2−Z)x)/2}})O₃ (0<x<0.6 and A=La³⁺, K⁺ or Sr²⁺) were prepared by a modified solid-state synthesis. The relative concentrations of Fe³⁺ and Nb⁵⁺ were adjusted to compensate the charge imbalance due to the aliovalent substitution. The dielectric constant and magnetic susceptibilities were studied as a function of temperature. The temperature of the dielectric maximum, T_M, of the substituted compounds decreased linearly with increasing concentration of the substituent ions. The magnetic measurements showed an antiferromagnetic transition at temperatures T_N1 due to the superexchange interactions mediated by Fe–O–Fe and an additional antiferromagnetic-type transition at T_N2. T_N1 linearly increased with the increasing concentration of Fe³⁺ ion at the B-site of ABO₃-type substituted compounds. T_M is shown to be directly dependent on the concentration of the ferroactive Nb⁵⁺ ions at the B-site and Pb²⁺ ions at the A-site.     

Band structures and proton-neutron interactions in Ta

Six rotational bands in the odd-odd nucleus ¹⁷⁴Ta have been populated with the ¹⁶⁰Gd(¹⁹F,5n) reaction. High-spin states were identified using the NORDBALL array. Both signatures of the doubly decoupled π1/2⁻ [541] ν1/2⁻ [521] band and semi-decoupled π1/2⁻ [541] ν7/2⁻ [633] band are observed, in addition to the high-K couplings of the π9/2⁻ [514] ν7/2⁺ [633], π9/2⁻ [514] ν5/2⁻ [512], π7/2⁺ [404] ν7/2⁺ [633], and π5/2⁺ [402] ν5/2⁻ [512] configurations. The signature splitting of the π1/2⁻ [541] ν7/2⁺ [633] band is inverted from the expected splitting, and this is interpreted as being due to a residual proton-neutron interaction. It is shown empirically that this interaction, together with deformation changes, can account for the increased crossing frequency associated with the alignment of i_13/2 neutrons in the π1/2⁻ [541] bands of odd-Z nuclei.     

Hadronic production by ee collisions at the energy 990 MeV with the Orsay storage ring

Data were taken at the energy 2E = 990 MeV to search for multibody events, with the same large solid angle detector which has been used for the measurement of the , ω andφ production by e⁺e⁻ annilations. Assuming a π⁺π⁻π⁰π⁰ production by the quasi two-body process e⁺e⁻ → → ωπ⁰ we give the correspondi ng cross section σ(e⁺e⁻ → π⁺π⁻π⁰π⁰) = (1.1 ± 0.5) 10⁻³² cm². Since no events with 3 and 4 charged pions have been observed σ(e⁺e⁻ → π⁺π⁻π⁰π⁻) 1.5 × 10⁻³³ cm².     

Electromagnetic final-state interactions in the leptonic decays of the neutral kaon (I) Kℓ3 mode

We present a calculation of the Coulomb final-state interaction effects in the decays K_L → π ℓ^±V_ℓ. Specifically we investigate the charge asymmetry and the transverse polarization of the charged lepton. We consider the effects of possible ΔQ = −ΔS amplitudes and the q² dependence of the form factors. The variation of the effects over the Dalitz plot is discussed and many numerical results are given.     

Z-scan determination of the third-order optical nonlinearity of a triphenylmethane dye using 633 nm He–Ne laser

The third-order nonlinear optical response of a triphenylmethane dye (Acid blue 7) was studied using the Z-scan technique with a continuous-wave He–Ne laser radiation at 633 nm. The magnitude and sign of the third-order nonlinear refractive index n₂ of aqueous solution of Acid blue 7 dye were determined; the negative sign indicates a self-defocusing optical nonlinearity in the sample studied. The negative nonlinear refractive index n₂ and nonlinear absorption coefficient β were estimated to be −1.88 × 10⁻⁷ cm²/W and −3.08 × 10⁻³ cm/W, respectively, corresponding to Re(χ⁽³⁾) = −8.35 × 10⁻⁶ esu, and Im(χ⁽³⁾) = −6.88 × 10⁻⁷ esu. The experimental results show that Acid blue 7 dye have potential applications in nonlinear optics.     

A limit on the lepton-family number violating process π → μe

A FNAL E799 Collaboration has carried out a search for the lepton-family number violating decay π⁰ → μ^±e using π⁰'s produced from K_L → π⁰π⁰π⁰ decays in flight. No events were observed. Assuming that lepton-family number violation is charge independent, the 90% confidence level upper limit on

Full-size image

was determined to be 8.6 × 10⁻⁹.     

Low temperature fabrication of vanadium oxide films for uncooled bolometric detectors

Vanadium oxide films with temperature coefficient of resistant of −2.6% K⁻¹ have been fabricated on Si₃N₄-film-coated Si substrates by ion beam sputtering in a controlled Ar/O₂ atmosphere, at a relatively low growth temperature of 200 °C. The as-deposited films show no semiconductor-to-metal phase transitions even heated up to 150 °C. X-ray diffractometry shows that the main compound of the VO_x film is a metastable phase of vanadium dioxide (VO₂(B)) and the VO₂(B) film can be transformed into VO₂ film by post-growth annealing at 450 °C in flowing Ar atmosphere.     

An examination of the initial oxidation of a uranium-base alloy (U–14.1 at.% Nb) by O2 and D2O using surface-sensitive techniques

The corrosion resistance of uranium is greatly enhanced by alloying with niobium. In this study the initial stages of corrosion of a specific uranium-base alloy (U–14.1 at.% Nb) by O₂ or D₂O have been examined using the surface specific techniques of X-ray photoelectron spectroscopy (XPS), thermal programmed desorption (TPD), static secondary-ion mass spectroscopy (SSIMS), and sputtered neutrals mass spectroscopy (SNMS). XPS studies of the U–14.1 at.% Nb surface following oxidation using O₂ at 300 K indicate production of a thin oxide overlayer of stoichiometric UO_2.0 intermixed with Nb₂O₅. The same stoichiometry is exhibited for uranium when the oxide is prepared at 500 K with O₂; although, niobium is much less oxidized exhibiting a mixture of NbO and Nb. Contrary to previous XPS literature, SNMS depth profiling studies reveal that oxidation by O₂ is much greater (as judged by oxide layer thickness) than that exhibited by D₂O. An oxide layer thickness of less than 20 Å was created using D₂O as an oxidant at 300 K with exposures >3500 L (oxide layers created from O₂ are significantly greater at much smaller exposures). Formation of a critical density of Nb₂O₅ is suggested to be responsible for the enhanced corrosion resistance by preventing diffusion of O⁻ (O²⁻) or OD⁻/OH⁻ into the oxide/metal interface region. The domains of stability of hydroxyl formation have also been followed using TPD, SSIMS and XPS. Maximal surface hydroxyl concentrations (Θ_rel=0.30) are obtained at a surface temperature of 175 K for these experimental conditions.     

Neutrino oscillations induced by two-loop radiative mechanism

Two-loop radiative mechanism, when combined with an U(1)_L′ symmetry generated by L_e − L_μ − L_τ (=L′), is shown to provide an estimate of Δm²/Δm²_atm εm_e/m_τ, where ε measures the U(1)_L′-breaking. Since Δm²_atm 3.5×10⁻³ eV², we find that Δm² ε10⁻⁶ eV², which will fall into the allowed region of the LOW solution to the solar neutrino problem for ε 0.1.     

Estimation of hydroxyl free radicals produced by ultrasound in Fricke solution used as a chemical dosimeter

Hydroxyl free radicals produced in Fricke solution exposed to 80 kV X-rays or 23 kHz ultrasound (intensity 3 W cm⁻²) or 20 kHz ultrasound (intensity 18.9 W cm⁻²) or 3.5 MHz clinical ultrasound (intensity 1.47 W cm⁻²), as estimated from the Fricke dosimetric data, exhibited a linear dose-response relationship. The dosimeter was found to be effective in the concentration range 1.0–8.0 mM of FeSO₄ solution. The hydroxyl radicals produced in Fricke solution were inhibited by the OH radical scavengers dimethyl sulfoxide (200 mM), -histidine (10 mM) and sodium benzoate (10 mM) in a manner proportional to the rate constants of their reaction with the OH radicals. The power threshold for OH radical formation, which is presumably the threshold for cavity formation, was estimated for 23 kHz ultrasound by this dosimeter as 1.28 W cm⁻² for a 4 cm³ sample volume.     

Symmetry breaking and the decays ψ′ → J/ψπ(η) and J/ψ → η(η′) γ

The theoretical mechanisms for the decays ψ′ → ψπ⁰ and ψ′ → ψη, which violate SU₂ and SU₃, respectively discussed. It is argued that symmetry breaking in the decay amplitudes may be as important as π⁰ −η −η′ mixing. The π⁰ −η mechanism ψ′ → ψν → ψπ⁰ leads to Γ(ψ′ → ψπ⁰) = (3.3±1.0) × 10⁻³ Γ(ψ′ → ψν), but this number may be enhanced by a factor as large as 12 by π⁰−η′ mixing and isospin violation in the decay amplitude. The related decays ψ → ηγ and ψ → η′γ are also discussed.     

The effect of oxygen vacancy on the oxide ion mobility in LaAlO3-based oxides

The electrical property of (La_1−xSr_x)_1−z(Al_1−yMg_y)O_3−δ (LSAM; x≤0.3, y≤0.15 and z≤0.1) was measured using the DC four-probe method as a function of temperature (500–1000°C) and oxygen partial pressure (1–10⁻²² atm). Among LSAMs, (La_0.9Sr_0.1)AlO_3−δ showed the highest ionic conductivity, σ_i=1.3×10⁻² S cm⁻¹ at 900°C. A simultaneous substitution at A and B sites or A site deficiency is expected to create larger oxygen vacancy and higher ionic conductivity. However, it showed a negative effect. The effect of the vacancy increase did not effect monotonously the ionic conductivity. It was found that the concentration of oxygen vacancy, [V_O], influences not only the oxide ion conductivity, σ_i, but also the mobility, μ_v, of [V_O]. These properties exhibit a maximum at around [V_O]=0.05. With the increase in [V_O], the activation energy, E_a, of the ionic conduction dropped from 1.8 to ca. 1.0 eV at [V_O]=0.05 and became almost constant at [V_O]>0.05. The dependency of the pre-exponential term, μ⁰_v, and E_a on [V_O] was analyzed and their effect on μ_v and σ_i was discussed with respect to crystal structure and defect association. It was estimated that the crystal structure mainly governs these properties. The effect of defect association could not be ignored but is considered to be a complicated correlation.     

Electrons and holes in undoped Nd2CuO4

Nd₂CuO_4±δ is the non-superconducting prototype of the Re_2−xM_xCuO₄t−y family (Re=Pr, Nd, Sm and M=Ceor Th) of n-type oxide superconductors. Four-probe DC conductivity, EMF in P(O₂) gradient, and thermopower measurements have been used to characterise its electric transport and defect structure between 300 and 900°C and between 5×10⁻⁴ and 1 atm oxygen partial pressure.

The results show that Nd₂CuO_4±δ can be oxygen under-stoichiometric (with n-type conductivity), near-stoichiometric, and over-stoichiometric (with p-type conductivity) in different T, P(O₂) ranges.     

Femtosecond laser micro-structuring of aluminium under helium

The interaction of 180 fs, 775 nm laser pulses with aluminium under a flowing stream of helium at ambient pressure have been used to study the material re-deposition, ablation rate and residual surface roughness. Threshold fluence F_th0.4 J cm⁻² and the volume ablation rate was measured to be 30<V<450 μm³ per pulse in the fluence range 1.4<F<21 J cm⁻². The presence of helium avoids gas breakdown above the substrate and leads to improved surface micro-structure by minimising surface oxidation and debris re-deposition. At 1 kHz rep. rate, with fluence F>7 J cm⁻² and >85 W cm⁻² average power density, residual thermal effects result in melt and debris formation producing poor surface micro-structure. On the contrary, surface micro-machining at low fluence F1.4 J cm⁻² with low power density, 3 W cm⁻² produces much superior surface micro-structuring with minimum melt and measured surface roughness R_a1.1±0.1 μm at a depth D50 μm. By varying the combination of fluence/scan speed during ultra-fast ablation of aluminium at 1 kHz rep. rate, results suggest that maintaining average scanned power density to <5 W cm⁻² combined with single pulse fluence <4 J cm⁻² produces near optimum micro-structuring. The debris under these conditions contains pure aluminium nanoparticles carried with the helium stream.     

Magnetic moment of the Δ (1232) resonance

The reaction γp → π^°γ′p has been measured with the TAPS BaF₂ calorimeter at the Mainz Microtron accelerator facility MAMI for energies between √2 = 1221–1331 MeV. Cross sections differential in angle and energy have been determined for the photon γ′ in three bins of the excitation energy. This reaction channel provides access to the magnetic dipole moment of the Δ⁺(1232) resonance and, for the first time, a value of μ_Δ+ = (2.7^+1.0_−1.3(stat) ± 1.5(syst) ± (theor)) π_N has been extracted.     

The stability of Na-doped Bi2(NbCr)O7−x pyrochlores: The non-existence of “(BiNa)(NbCr)O6”

We show that the pyrochlore described as “(BiNa)(NbCr)O₆” is in fact a non-stoichiometric pyrochlore with an approximate composition of (Bi_1.33Na_0.67)(Nb_1.33Cr_0.67)O_7−x. Refinement of this structure using constant wavelength powder neutron diffraction data reveals the presence of vacancies in the anion sites coupled with displacive disorder of the Bi and Na cations. This is necessary to achieve a satisfactory bonding arrangement for both the Bi and Na cations that occupy the pyrochlore A-type sites. Attempts to prepare other pyrochlores in the series Bi_2−xNa_x(NbCr)O₆ were unsuccessful and it appears that the pyrochlore is only stable only over a very narrow composition range. The structure of the pure Bi pyrochlore Bi₂(NbCr)O₇ is also described.