Reorganization of lipid nanocapsules at air-water interface: Part 2. Properties of the formed surface film

The state, electrical and dilatational rheological properties of surface films formed at air–water interface from lipid nanocapsules (LNC) with various compositions as well as model monolayers formed by the LNC constituents—Labrafac^®, Solutol^® and Lipoid^® are investigated. These nanocapsules constitute potential drug delivery systems where lypophilic drug will be loaded in their core. The study of the model Labrafac^®/Solutol^® (Lab/Sol) mixed monolayers shows behavior close to the ideal. Small negative deviations in the mean molecular areas a and dipole moments μ are observed. All studied monolayers have elastic behavior during the small continuous compressions. The comparison between the properties of surface films formed from LNC with those of the model monolayers confirms the idea developed in the kinetic study [I. Minkov, Tz. Ivanova, I. Panaiotov, J. Proust, P. Saulnier, Reorganization of lipid nanocapsules at air–water interface: 1. Kinetics of surface film formation, J. Colloids Surf. B: Biointerfaces, submited for publication.] that the surface films formed after a rapid disaggregation of the unstable nanocapsule fraction (LNC I) contains mainly Labrafac and Solutol. The Labrafac molar part (x_Lab) in the formed Lab/Sol mixed layer is established.     

Interfacial behavior of lipid nanocapsules spread on model membrane monolayers

The lipid nanocapsules (LNCs) spread at the air–water interface (A/W) undergo destabilization and disaggregation leading to formation of a triglyceride (TG) surface film. The kinetics of reorganization and formation of TG surface film were followed by measuring either the change of surface pressure at constant area or the surface area at constant surface pressure. From the obtained experimental data were determined the effectiveness of TG spreading and the rate of LNC disaggregation at A/W interface covered with preformed model membrane monolayers of DPPC, Curosurf®, and mucus. Partial LNC stabilization due to their interaction with the model membrane monolayers was observed and characterized by atomic force microscopy (AFM). The obtained results demonstrated that the LNCs spread on mucus surface layer, which models the epithelial surface were more stable than if they were spread either on DPPC or Curosurf® surface layers, which emulate the alveolar surface.     

Comparative study of lipolysis by PLA2 of DOPC substrates organized as monolayers, bilayer vesicles and nanocapsules

The water-soluble lipolytic enzymes act at the interface of insoluble lipid substrates, where the catalytical step is coupled with various interfacial phenomena as enzyme penetration, solubilization of reaction products, loss of mechanical stability of organized assemblies of phospholipids molecule, etc. One biologically relevant example is the enzymatic hydrolysis of DOPC by PLA(2), which results in cleavage of phospholipids molecules into water insoluble lipolytic products, namely oleic acid and lysophospholipid. In general, the enzymatic activity depends on the substrate organization and molecular environment of the catalytic reaction. The lipolysis by phospholipase A(2) of dioleoylphosphatidylcholine substrates organized as monolayer, bilayers vesicles and lipid nanocapsules was studied by measuring the decrease of the surface area at constant surface pressure or increase of the surface pressure at constant area at air-water interface. A kinetic model describing the coupling of the catalytic act with corresponding interfacial phenomena was developed. By using the kinetic model the values for the global hydrolytic kinetic constants were obtained. The obtained value for the monolayer is five orders of magnitude higher than this obtained with small unilamellar vesicles and six orders of magnitude higher then those obtained with lipid nanocapsules. The comparison shows that the enzymatic catalytic act occurring in the lipid environment of the monolayer is more efficacious than at the vesicle and nanocapsules interfaces.     

Structural properties and Raman spectroscopy of lipid Langmuir monolayers at the air-water interface

Spectra of octadecylamine (ODA) Langmuir monolayers and egg phosphatidylcholine (PC)/ODA-mixed monolayers at the air-water interface have been acquired. The organization of the monolayers has been characterized by surface pressure-area isotherms. Application of polarized optical microscopy provides further insight in the domain structures and interactions of the film components. Surface-enhanced Raman scattering (SERS) data indicate that enhancement in Raman spectra can be obtained by strong interaction between headgroups of the surfactants and silver particles in subphase. By mixing ODA with phospholipid molecules and spreading the mixture at the air-water interface, we acquired vibrational information of phospholipid molecules with surfactant-aided SERS effect.     

Interactions of anthracyclines with zwitterionic phospholipid monolayers at the air-water interface

The present note describes the use of surface pressure measurements (Langmuir monolayer technique) for the analysis of interactions of two different anthracyclines (adriamycin and daunorubicin) with a non-ionic, zwitterionic phospholipid monolayer, at the air-water interface. Because the surface membrane of the cell is the first barrier encountered by the anthracyclines in the treatment of cancer, drug-membrane interactions studied in model (monolayers or bilayers) and natural systems play an important role in the understanding of the bioactivity properties of these molecules. We report here the rate constants of the adsorption process of adriamycin and daunorubicin in the presence of a zwitterionic phospholipid monolayer at the air-water interface. Because interactions with the lipid monolayer strongly depend on the molecular packing of the lipid, we investigated this process at a relatively low surface pressure (7 mN/m), the interactions being favoured by the gaseous and liquid expanded structure of the lipid monolayer. The apparent molecular area of these molecules during the insertion into the lipid film and their interactions with the phospholipid polar head groups was evaluated and the estimated percentage of anthracyclines at the interface after adsorption into the lipid monolayer is briefly discussed. The rate constants for the adsorption and desorption process at the water-monolayer interface have been calculated on the basis of a single-exponential model. The observed difference of these parameters for daunorubicin and adriamycin suggests a different interaction of these anthracyclines during the adsorption to and/or penetration across the phospholipid monolayer.     

Reorganization of lipid nanocapsules at air-water interface 3. Action of hydrolytic enzymes HLL and pancreatic PLA2

The action of the hydrolytic enzymes humicola lanuginosa lipase (HLL) and pancreatic phospholipase A2 (PLA2) on monolayers formed from lipid nanocapsules (LNC) and model monolayers containing their components, Labrafac, Solutol and Lipoid, is studied by simultaneous measuring the changes in the film area and the surface potential in the "zero order" trough at constant surface pressure (pi). The kinetic models describing the hydrolysis by HLL of the Labrafac, Solutol and their mixtures have been proposed. By using the developed theoretical approach together with the experimental results the surface concentrations of the substrates, hydrolysis products and values of the global kinetic constants were obtained. The comparison between the global kinetic constants in the case of HLL hydrolysis of pure Labrafac, Solutol monolayers and those of the model mixed Labrafac/Solutol monolayers, shows that the rates of hydrolysis are of the same order of magnitude, i.e. an additively of the HLL enzyme action is observed. The composition of the mixed Labrafac/Solutol monolayer, formed after the interfacial LNC destabilization, was estimated.     

Effect of the polar headgroup of phospholipids on their interaction with actin

It is generally admitted that actin filaments are anchored to a membrane by membranar actin-binding-proteins. However, we found that actin may also interact directly with membrane phospholipids. The actin-phospholipid complex has been investigated at the air-water interface using a film balance technique. In order to probe the effect of the phospholipid headgroup on the actin-phospholipid interaction, we focus mainly on phospholipids that have the same acyl chain length but different headgroups. For all the phospholipids, the apparent area per molecule (the total surface divided by the number of lipid molecules) increases after the injection of the protein into the subphase, which suggests an intercalation of actin between the phospholipid molecules. This effect seems to be more important for DMPE and DMPS than for DMPG, suggesting that the headgroup plays an important role in this intercalation. The critical surface pressure associated to the liquid expanded-liquid condensed (LE-LC) phospholipid transition increases with the concentration of G-actin and thus suggests that G-actin acts as an impurity, simply competing as a surfactant at the air-water interface. On the other hand, F-actin affects the LE to LC transition of phospholipids differently. In this case, the LE to LC transition is broader and F-actin slightly decreases the critical surface pressure, which suggests that electrostatic interactions are involved.     

Langmuir-Blodgett film of hydrophobin protein from Pleurotus ostreatus at the air-water interface

We present results concerning the formation of Langmuir-Blodgett (LB) films of a class I hydrophobin from Pleurotus ostreatus at the air-water interface, and their structure as Langmuir-Blodgett (LB) films when deposited on silicon substrates. LB films of the hydrophobin were investigated by atomic force microscopy (AFM). We observed that the compressed film at the air-water interface exhibits a molecular depletion even at low surface pressure. In order to estimate the surface molecular concentration, we fit the experimental isotherm with Volmer's equation describing the equation of state for molecular monolayers. We found that about (1)/ 10 of the molecules contribute to the surface film formation. When transferred on silicon substrates, compact and uniform monomolecular layers about 2.5 nm thick, comparable to a typical molecular size, were observed. The monolayers coexist with protein aggregates, under the typical rodlet form with a uniform thickness of about 5.0 nm. The observed rodlets appear to be a hydrophilic bilayer and can then be responsible for the surface molecular depletion.     

Aggregation of a peptide antibiotic alamethicin at the air-water interface and its influence on the viscoelasticity of phospholipid monolayers

The aggregation properties of an antibiotic membrane-active peptide alamethicin at the air-water interface have been studied using interfacial rheology and fluorescence microscopy techniques. Fluorescence microscopy of alamethicin monolayers revealed a coexistence of liquid expanded (LE) and solid phases at the surface concentrations studied. Interfacial oscillatory shear measurements on alamethicin monolayers indicate that its viscoelastic properties are determined by the area fraction of the solid domains. The role of zwitterionic phospholipids dioleoylphosphatidyl choline (DOPC) and dioleoylphosphatidyl ethanolamine (DOPE) on the peptide aggregation behavior was also investigated. Fluorescence microscopy of alamethicin/phospholipid monolayers revealed an intermediate phase (I) in addition to the solid and LE phase. In mixed monolayers of phospholipid (L)/alamethicin (P), with increase in L/P, the monolayer transforms from a viscoelastic to a viscous fluid with the increase in area fraction of the intermediate phase. Further, a homogeneous mixing of alamethicin/lipid molecules is observed at L/P > 4. Our studies also confirm that the viscoelasticity of alamethicin/phospholipid monolayers is closely related to the alamethicin/phospholipid interactions at the air-water interface.     

On the stability of Langmuir films of pyramidic mesogens

Pyramidic mesogens forming thermotropic liquid crystal bulk phases were spread in an air-water interface. Pressure surface measurements and polarizing microscopy on the Langmuir films were used to characterize the various states of these pyramidic-like molecules. For two compounds bearing short lateral aliphatic chains, the surface pressure isotherms exhibit a large plateau region corresponding to a metastable monolayer in which the molecules may adopt an 'edge-on' arrangement. The coexistence of multilayered, anisotropic, slowly growing domains with the monolayer in the plateau region has been observed at long time scale. The film area relaxation kinetics at constant surface pressure show the existence of two nucleation mechanisms for the formation of these domains.     

Comparative studies of nontoxic and toxic amyloids interacting with membrane models at the air-water interface

Many in vitro studies have pointed out the interaction between amyloids and membranes, and their potential involvement in amyloid toxicity. In a previous study, we generated a yeast toxic mutant (M8) of the harmless model amyloid protein HET-s((218-289)). In this study, we compared the self-assembling process of the nontoxic wild-type (WT) and toxic (M8) protein at the air-water interface and in interaction with various phospholipid monolayers (DOPE, DOPC, DOPI, DOPS and DOPG). We first demonstrate using ellipsometry measurements and polarization-modulated infrared reflection absorption spectroscopy (PMIRRAS) that the air-water interface promotes and modifies the assembly of WT since an amyloid-like film was instantaneously formed at the interface with an antiparallel β-sheet structuration instead of the parallel β-sheet commonly observed for amyloid fibers generated in solution. The toxic mutant (M8) behaves in a similar manner at the air-water interface or in bulk, with a fast self-assembling and an antiparallel β-sheet organization. The transmission electron microscopy (TEM) images established the fibrillous morphology of the protein films formed at the air-water interface. Second, we demonstrate for the first time that the main driving force between this particular fungus amyloid and membrane interaction is based on electrostatic interactions with negatively charged phospholipids (DOPG, DOPI, DOPS). Interestingly, the toxic mutant (M8) clearly induces perturbations of the negatively charged phospholipid monolayers, leading to a massive surface aggregation, whereas the nontoxic (WT) exhibits a slight effect on the membrane models. This study allows concluding that the toxicity of the M8 mutant could be due to its high propensity to interact with membranes.     

Adsorption kinetics of n-nonyl-beta-D-glucopyranoside at the air-water interface studied by infrared reflection absorption spectroscopy

The adsorption of the surfactant n-nonyl-beta-D-glucopyranoside at the air-water interface after injection of the surfactant into the subphase was studied by infrared reflection absorption spectroscopy. In the first part, we investigated the equilibrium adsorption of n-nonyl-beta-D-glucopyranoside and the Gibbs adsorption isotherm was measured by applying the film balance technique. In the second part, the adsorption kinetics was followed by changes in the surface pressure and in the intensities of the OH band, which is related to the layer thickness, and the CH(2) antisymmetric stretching vibrational band. During an induction period, when the molecules are still highly diluted and the surface pressure is low, they are oriented parallel to the air-water interface. IR band simulations for the CH(2) antisymmetric stretching vibrational band support the idea of horizontally oriented molecules at the air-water interface. Later on, when more molecules are adsorbed to the air-water interface, they suddenly rearrange to an upright orientation as indicated by changes of the OH and the CH(2) bands. The observations are discussed in comparison to results obtained for the adsorption kinetics of n-decyl-beta-D-maltopyranoside, n-dodecyl-beta-D-maltopyranoside, and sodium dodecyl sulfate.     

Anisotropic aggregation and phase transition in Langmuir monolayers of methyl/ethyl esters of 2,3-dihydroxy fatty acids

We studied interfacial properties of a series of methyl and ethyl esters of enantioenriched syn-2,3-dihydroxy fatty acids with different chain lengths at the air-water interface, using a Langmuir type film balance and a Brewster angle microscope (BAM). After analyzing their surface pressure (Pi)-area (A) isotherms, we inferred that these molecules existed as an E conformation in the liquid-expanded (LE) phase of monolayers, and the E conformation of molecules changed into a Z conformation during the LE-LC transition in a monolayer. BAM images evidenced the formation of elongated LC aggregates. This is possibly induced by the intermolecular hydrogen bonds, leading to the anisotropic growth of LC domains, on the basis of the FT-IR spectroscopy data. The enthalpy change of the LE-LC phase transition is considered to result from the three types of intermolecular interactions at the air-water interface during compression of these amphiphiles. These findings are discussed in terms of various physical factors that influenced intermolecular interactions and macroscopic aggregations of these amphiphiles.     

Unexpected bilayer formation in Langmuir films of nucleolipids

Langmuir monolayers have been extensively investigated by various experimental techniques. These studies allowed an in-depth understanding of the molecular conformation in the layer, phase transitions, and the structure of the multilayer. As the monolayer is compressed and the surface pressure is increased beyond a critical value, usually occurring in the minimal closely packed molecular area, the monolayer fractures and/or folds, forming multilayers in a process referred to as collapse. Various mechanisms for monolayer collapse and the resulting reorganization of the film have been proposed, and only a few studies have demonstrated the formation of a bilayer after collapse and with the use of a Ca(2+) solution. In this work, Langmuir isotherms coupled with imaging ellipsometry and polarization modulation infrared reflection absorption spectroscopy were recorded to investigate the air-water interface properties of Langmuir films of anionic nucleolipids. We report for these new molecules the formation of a quasi-hexagonal packing of bilayer domains at a low compression rate, a singular behavior for lipids at the air-water interface that has not yet been documented.     

Transition from homogeneous Langmuir-Blodgett monolayers to striped bilayers driven by a wetting instability in octadecylsiloxane monolayers

We show that two dips of an oxidized silicon substrate through a prepolymerized n-octadecylsiloxane monolayer at an air-water interface in a rapid succession produces periodic, linear striped patterns in film morphology extending over macroscopic area of the substrate surface. Langmuir monolayers of n-octadecyltrimethoxysilane were prepared at the surface of an acidic subphase (pH 2) maintained at room temperature (22 +/- 2 degrees C) under relative humidities of 50-70%. The substrate was first withdrawn at a high dipping rate from the quiescent aqueous subphase (upstroke) maintained at several surface pressures corresponding to a condensed monolayer state and lowered soon after at the same rate into the monolayer covered subphase (downstroke). The film structure and morphology were characterized using a combination of optical microscopy, imaging ellipsometry, and Fourier transform infrared spectroscopy. An extended striped pattern, perpendicular to the pushing direction of the second stroke, resulted for all surface pressures when the dipping rate exceeded a threshold value of 40 mm min(-1). Below this threshold value, uniform deposition characterizing formation of a bimolecular film was obtained. Under conditions that favored striped deposition during the downstroke through the monolayer-covered interface, we observed a periodic auto-oscillatory behavior of the meniscus. The stripes appear to be formed by a highly correlated reorganization and/or exchange of the first monolayer, mediated by the Langmuir monolayer at the air-water interface. This mechanism appears distinctly different from nanometer scale stripes observed recently in single transfers of phospholipid monolayers maintained near a phase boundary. The stripes further exhibit wettability patterns useful for spatially selective functionalization, as demonstrated by directed adsorptions of an organic dye (fluorescein) and an oil (hexadecane).     

Formation, structure, and morphology of triazole-based Langmuir-Blodgett films

The formation, morphology, and structure of two-dimensional Langmuir-Blodgett (LB) assemblies of octadecyltriazole (ODT)-based metal-containing oligomers presenting, in the case of iron, the spin-crossover phenomenon is studied with Brewster angle microscopy, IR dichroism, X-ray diffraction, and atomic force microscopy. Two processes occurring at the air-water interface are confirmed to dominate the mechanism of formation of these LB films, the instability of the coordination polymers at the air-water interface and recoordination of metal ions in the subphase at the interface during the LB deposition process. The Langmuir film allowing the LB film formation is mostly made of ODT. The films do present a lamellar structure in which the ODT molecules are tilted and incorporate coordinated isolated metal ions and oligomers of metal ions. The morphology of the LB films is globally flat but with a rather high roughness resulting from inhomogeneities related to phenomena occurring during the LB film formation. These observations are in agreement with the relative affinity of the metal ions with ODT and the relative stability of the coordination polymers at the air-water interface, which have been determined for the group Cu-Fe-Co-Ni.     

Study of the aggregation of human insulin Langmuir monolayer

The human insulin (HI) Langmuir monolayer at the air-water interface was systematically investigated in the presence and absence of Zn(II) ions in the subphase. HI samples were dissolved in acidic (pH 2) and basic (pH 9) aqueous solutions and then spread at the air-water interface. Spectroscopic data of aqueous solutions of HI show a difference in HI conformation at different pH values. Moreover, the dynamics of the insulin protein showed a dependence on the concentration of Zn(II) ions. In the absence of Zn(II) ions in the subphase, the acidic and basic solutions showed similar behavior at the air-water interface. In the presence of Zn(II) ions in the subphase, the surface pressure-area and surface potential-area isotherms suggest that HI may aggregate at the air-water interface. It was observed that increasing the concentration of Zn(II) ions in the acidic (pH 2) aqueous solution of HI led to an increase of the area at a specific surface pressure. It was also seen that the conformation of HI in the basic (pH 9) medium had a reverse effect (decrease in the surface area) with the increase of the concentration of Zn(II) ions in solution. From the compression-decompression cycles we can conclude that the aggregated HI film at air-water interface is not stable and tends to restore a monolayer of monomers. These results were confirmed from UV-vis and fluorescence spectroscopy analysis. Infrared reflection-absorption and circular dichroism spectroscopy techniques were used to determine the secondary structure and orientation changes of HI by zinc ions. Generally, the aggregation process leads to a conformation change from α-helix to β-strand and β-turn, and at the air-water interface, the aggregation process was likewise seen to induce specific orientations for HI in the acidic and basic media. A proposed surface orientation model is presented here as an explanation to the experimental data, shedding light for further research on the behavior of insulin as a Langmuir monolayer.     

Surface chemistry studies of (CdSe)ZnS quantum dots at the air-water interface

Trioctylphosphine oxide- (TOPO-) capped (CdSe)ZnS quantum dots (QDs) were prepared through a stepwise synthesis. The surface chemistry behavior of the QDs at the air-water interface was carefully examined by various physical measurements. The surface pressure-area isotherm of the Langmuir film of the QDs gave an average diameter of 4.4 nm, which matched very well with the value determined by transmission electron microscopy (TEM) measurements if the thickness of the TOPO cap was counted. The stability of the Langmuir film of the QDs was tested by two different methods, compression/decompression cycling and kinetic measurements, both of which indicated that TOPO-capped (CdSe)ZnS QDs can form stable Langmuir films at the air-water interface. Epifluorescence microscopy revealed the two-dimensional aggregation of the QDs in Langmuir films during the early stage of the compression process. However, at high surface pressures, the Langmuir film of QDs was more homogeneous and was capable of being deposited on a hydrophobic quartz slide by the Langmuir-Blodgett (LB) film technique. Photoluminescence (PL) spectroscopy was utilized to characterize the LB films. The PL intensity of the LB film of QDs at the first emission maximum was found to increase linearly with increasing number of layers deposited onto the hydrophobic quartz slide, which implied a homogeneous deposition of the Langmuir film of QDs at surface pressures greater than 20 mN.m(-1).     

2-Dimensional Network Formation from a Graft Copolymer at the Air-Water Interface

Summary: The UV induced cross-linking of a well defined graft copolymer polynorbornene-g-poly(ethylene oxide) at the air-water interface has been investigated. Network formation has been monitored qualitatively by observing changes in surface pressure with UV exposure time working under constant area conditions. Surface film concentration has been used as the design parameter to manipulate initial film organization, and consequently position of the functional groups. Exposure of the copolymer film to UV light at different surface concentrations in the liquid condensed region shows the closer the molecules pack together the faster the cross-linking reaction, while no cross-linking occurs when the molecules are far apart in the liquid expanded state.     

On the stability of Langmuir films of pyramidic mesogens

Abstract

Pyramidic mesogens forming thermotropic liquid crystal bulk phases were spread in an air-water interface. Pressure surface measurements and polarizing microscopy on the Langmuir films were used to characterize the various states of these pyramidic-like molecules. For two compounds bearing short lateral aliphatic chains, the surface pressure isotherms exhibit a large plateau region corresponding to a metastable monolayer in which the molecules may adopt an ‘edge-on’ arrangement. The coexistence of multilayered, anisotropic, slowly growing domains with the monolayer in the plateau region has been observed at long time scale. The film area relaxation kinetics at constant surface pressure show the existence of two nucleation mechanisms for the formation of these domains.