Impact of palladium silicide formation on the catalytic properties of Pd/SiO2 catalysts in liquid-phase semihydrogenation of phenylacetylene

In this study, palladium silicide was formed on the sol–gel derived SiO₂ supported Pd catalysts when they were prepared by ion-exchange method using Pd(NH₃)₄Cl₂ as a palladium precursor. No other palladium phases (PdO or Pd⁰) were evident after calcinations at 450 °C for 3 h. The Pd/SiO₂ catalysts with Pd silicide formation were found to exhibit superior performance than commercial SiO₂ supported ones in liquid-phase semihydrogenation of phenylacetylene. From XPS results, the binding energy of Pd 3d of palladium silicide on the Pd/SiO₂ catalyst shifted toward larger binging energy, indicating that Pd is electron deficient. This could probably result in an inhibition of a product styrene on the Pd surface and hence high styrene selectivities were obtained at high phenylacetylene conversions. The formation of Pd silicide, however, did not have much impact on specific activity of the Pd catalysts since the TOFs were quite similar among the various catalysts with or without palladium silicides if their average particle sizes were large enough. The TOFs decreased by an order of magnitude when palladium dispersion was very high and their average particle sizes were smaller than 3–5 nm.     

Adsorption and kinetics of the oxidation of ethylene on PdCl2/SiO2

A new variant of the kinetic distributive method was used to study the kinetics of the oxidation of ethylene by PdCl₂ complexes supported on silica gel taking account of the equilibrium distribution of ethylene between the gas phase, silica gel, and metal complex reaction sites. Mono-, bi-, and polynuclear palladium(II) species are found to participate in the reaction. The Pd^II activity increases with increasing amount of nuclei in the species. L. M. Litvinenko Institute of Physical Organic and Coal Chemistry, National Academy of Sciences of Ukraine, 70 R. Lyuksemburg ul., Donetsk 83114, Ukraine. Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 36, No. 4, pp. 243–246, July–August, 2000.     

Separation of trace amounts palladium by SiO2/TiO2/Ce nanoparticles prior to flame atomic absorption spectrometry determination in anodic slime and wastewater samples

In the present work, a new SiO₂/TiO₂/Ce, nanoparticle was synthesed using sol-gel method and evaluated as an adsorbent for preconcentration trace amounts of Pd(II) ions. The characterization of the nanoparticles has been studied by transmission electron microscope and X-ray diffraction. The preconcentration method is based on palladium adsorption onto the surface of nanoparticle at pH 8.5. The main factors affecting Pd(II) adsorption, such as pH of sample solution, concentration and volume of eluent, sample volume, interfering of the coexisting ions and flow rate of sample and eluent were investigated and optimized. At optimum conditions, linearity was maintained between 4.0 to 1000.0 ng mL^?1. Detection limit based on 3S_b/m was 2.3 ng mL^?1. Seven replicate determinations of a solution containing of 12.5 µg palladium gave a relative standard deviation ±1.7%. According to the Langmuir linear model, the maximum adsorption capacity of palladium was found to be 34.5 mg g^?1. Finally, the feasibility of the proposed method for Pd(II) determination was assessed by analysis of certified reference materials, anodic slime and wastewater samples and satisfactory results were obtained.      

Spectral,crystallographic, theoretical and antibacterial studies of palladium(II)/platinum(II) complexes with unsymmetric diphosphine ylides

The reaction of α‐keto‐stabilized diphosphine ylides [Ph₂P(CH₂)_nPPh₂═C(H)C(O)C₆H₄‐p‐CN] (n = 1 (Y¹); n = 2 (Y²)) with dibromo(1,5‐cyclooctadiene) palladium(II)/platinum(II) complexes, [Pd/PtBr₂(cod)], in equimolar ratio gave the new cyclometalated Pd(II) and Pt(II) complexes [Br₂Pd(κ²‐Y¹)] ( 1 ), [Br₂Pt(κ²‐Y¹)] ( 2 ), [Br₂Pd(κ²‐Y²)] ( 3 ) and [Br₂Pt(κ²‐Y²)] ( 4 ). These compounds were screened in a search for novel antibacterial agents and characterized successfully using Fourier transfer infrared and NMR (¹H, ¹³C and ³¹P) spectroscopic methods. Also, the structures of complexes 1 and 2 were characterized using X‐ray crystallography. The results showed that the P,C‐chelated complexes 1 and 2 have structures consisting of five‐membered rings, while 3 and 4 have six‐membered rings, formed by coordination of the ligand through the phosphine group and the ylidic carbon atom to the metal centre. Also, a theoretical study of the structures of complexes 1 – 4 was conducted at the BP86/def2‐SVP level of theory. The nature of metal–ligand bonds in the complexes was investigated using energy decomposition analyses (EDA) and extended transition state combined with natural orbitals for chemical valence analyses. The results of EDA confirmed that the main portions of ΔE_int, about 57–58%, in the complexes are allocated to ΔE_elstat.     

Highly sensitive spectrofluorimetric determination of cysteine by Cu2+-morin complex

p-Toluenesulfonylamide was immobilized on silica gel and on nm-sized silicium dioxide (SiO₂). Their adsorption efficiency toward metal ions was investigated by the batch equilibrium technique. Although silica gel and nm-SiO₂ have the same composition (silicon and oxygen), the difference in their sizes and surface structures results in distinct chemical activity and selectivity. At pH 4, the adsorption capacity of modified silica gel adsorbent was found to be 4.9, 5.0, 33.2, and 12.6 mg g⁻¹ for Cr(III), Cu(II), Pb(II) and Zn(II), respectively. However, the adsorption capacity of nm-SiO₂ adsorbent toward Cr(III) was 26.7 mg g⁻¹ under ultrasonic dispersing. The potential application of p-toluenesulfonylamide-modified silica gel for simultaneous preconcentration of trace chromium, copper, lead and zinc from two standard reference materials and two food samples was performed with satisfactory results. Correspondence: Xijun Chang, Department of Chemistry, Lanzhou University, Lanzhou 730000, P.R. China     

Mechanism of Charging of Au Atoms and Nanoclusters on Li Doped SiO2/Mo(112) Films

We present the results of supercell DFT calculations on the adsorption properties of Au atoms and small clusters (Au_n, n≤5) on a SiO₂/Mo(112) thin film and on the same system modified by doping with Li atoms. The adsorbed Li atoms penetrate into the pores of the silica film and become stabilized at the interface where they donate one electron to the Mo metal. As a consequence, the work function of the Li‐doped SiO₂/Mo(112) film is reduced and results in modified adsorption properties. In fact, while on the undoped SiO₂/Mo(112) film Au interacts only very weakly, on the Li‐doped surface Au atoms and clusters bind with significant bond strengths. The calculations show that this is due to the occurrence of an electron transfer from the SiO₂/Mo(112) interface to the adsorbed gold. The occurrence of the charge transfer is related to the work function of the support but also to the possibility for the silica film to undergo a strong polaronic distortion.     

Nucleation Phenomenon in Silica Xerogels and Pd/SiO2, Ag/SiO2, Cu/SiO2 Cogelled Catalysts

Pd/SiO₂, Ag/SiO₂ and Cu/SiO₂ xerogel catalysts have been synthesized by cogelation of tetraethoxysilane (TEOS) and chelates of Pd, Ag and Cu with 3-(2-aminoethylamino)propyltrimethoxysilane (EDAS). It appears that, in cogelled samples, the metal complex acts as a nucleation agent in the formation of silica particles. The resulting catalysts are then composed of completely accessible metallic crystallites with a diameter of about 3 nm located inside silica porous particles with a monodisperse microporous distribution. Xerogels without metal synthesized with EDAS and TEOS (C. Alié, R. Pirard, A.J. Lecloux, and J.-P. Pirard, J. Non-Cryst. Solids 289, 88 (2001)) verify this hypothesis of nucleation by EDAS.     

Preparation and characterization of CuO/SiO2 and NiO/SiO2 with bimodal pore structure by sol-gel method

CuO/SiO₂ and NiO/SiO₂ with bimodal pore structure were prepared by sol-gel reactions of Tetra-methoxysilane (TMOS) and the respective metal nitrate in the presence of poly (ethylene oxide) (PEO) with an average molecular weight of 10 000 and the catalyst of acetic acid. In this process, the interconnected macroporous morphology was formed when transitional structures of spinodal decomposition were frozen by the sol-gel transition of silica. The addition of copper and nickel into the silica-PEO system had a negligible effect on the morphology formation. In gel formation, it was found that NiO crystalline sizes in the samples increased with decreasing Si/Ni molar ratio. It was considered that PEO interacted with both silica and nickel cations. In the CuO/SiO₂ with the presence of PEO_, CuO crystalline sizes were larger than those of NiO/SiO_2. It was considered that there was no obvious interaction between the Cu cation and PEO, most of the copper ions in wet silica gel were present in the outer solution. They easily aggregated as copper salts in the drying process of wet gel and decomposed into CuO particles in heating. While in the CuO/SiO₂ with the absence of PEO, the Cu was selectively entrapped as small particles in the gel skeleton due to the interaction between Cu aqua complex and silica gel network.     

Palladium(II) and Platinum(II) Complexes with Bisphosphanes, [S2C=C(CN)2]2– and [Se2C=C(CN)2]2– as Chelating Ligands

The palladium(II) and platin(II) 1, 1‐dicyanoethylene‐2, 2‐dithiolates [(L–L)M{S₂C=C(CN)₂}] (M = Pd: L–L = dppm, dppe, dcpe, dpmb; M = Pt: dppe, dcpe, dpmb) were prepared either from[(L–L)MCl₂] and K₂[S₂C=C(CN)₂] or from [(PPh₃)₂M{S₂C=C(CN)₂}] and the bisphosphane. Moreover, [(dppe)Pt{S₂C=C(CN)₂}]was obtained from [(1, 5‐C₈H₁₂)Pt{S₂C=C(CN)₂}] and dppeby ligand exchange. The 1, 1‐dicyanoethylene‐2, 2‐diselenolates[(dppe)M{Se₂C=C(CN)₂}] (M = Pd, Pt) were prepared from[(dppe)MCl₂] and K₂[Se₂C=C(CN)₂]. The oxidation potentials of the square‐planar palladium and platinum complexes were determined by cyclic voltammetry. The reaction of [(dcpe)Pd(S₂C=O)] with TCNE led to a ligand fragment exchange and gave the 1, 1‐dicyanoethylene‐2, 2‐dithiolate [(dcpe)Pd{S₂C=C(CN)₂}] in good yield.     

硅胶原位合成ZSM-5分子筛及其催化性能的研究

以正丁胺为模板剂,采用水热晶化法在固体硅胶小球上原位合成了ZSM-5分子筛。考察了晶化温度、晶化时间、初始凝胶硅铝比及H2O/ SiO2、BuNH2/ SiO2、OH-/SiO2对ZSM-5相对结晶度的影响,得到了ZSM 5的合成化学规律。采用XRD、SEM、FT IR及N2吸附手段对固体硅胶小球上原位合成的复合结构分子筛进行了表征。结果表明,这种材料具有介孔和微孔的复合结构特征,而且很好地保持了硅胶小球的形貌。以大庆VGO为原料,在重油微反装置上对该复合结构分子筛进行催化性能评价。结果表明,使用硅胶原位合成的ZSM-5分子筛可显著提高低碳烯烃选择性和收率。     

Bis(oxamato)palladate(II) complexes: synthesis,crystal structure and application to catalytic Suzuki reaction

New bis(oxamato)palladate(II) complexes, [Pd(H₂O)₄][Pd(2,6-Me₂pma)₂]·2H₂O (1), (n-Bu₄N)₂[Pd(2,6-Me₂pma)₂]·2H₂O (2a), and (n-Bu₄N)₂[Pd(2,6-Me₂pma)₂]·2CHCl₃ (2b) (2,6-Me₂pma = N-2,6-dimethylphenyoxamate and n-Bu₄N⁺ = tetra-n-butylammonium), have been synthesized and the structures of 1 and 2b characterized by single-crystal X-ray diffraction. Complex 1 is a double salt constituted by tetraaquapalladium(II) cations and bis(oxamato)palladate(II) anions interlinked by hydrogen bonds. The palladium(II) ions in 1 are four-coordinate with two oxygens and two nitrogens from two fully deprotonated oxamate ligands (anion), and four water molecules (cation) building centrosymmetric square-planar surroundings. Centrosymmetric bis(oxamato)palladate(II) anions occur in 2b as in 1, the charge balance in this compound being ensured by the bulky n-Bu₄N⁺. The catalytic role of 1 and 2a for the Suzuki reaction has been investigated by using a series of aryl iodide/bromide derivatives in the conventional organic medium dimethylformamide. The tetraaquapalladium(II) unit in 1 appears to be active in the catalytic Suzuki cross-coupling reactions, but it readily decomposes to inactive palladium black.     

Reduction of palladium(II) monoglycinate complexes at rotating disc palladium electrode in acid media

Reduction of palladium(II) glycinate complexes in strongly acid 0.5 M NaClO₄ solutions (pH 0.6 and 1.0) with variable palladium(II) complex and free glycine concentration was studied by the taking of cyclic voltammograms at palladium rotating disc electrode. It is shown that it was a chelate monoglycinate palladium(II) complex that was present in all studied solutions and underwent the reduction. The diffusion coefficient of the chelate monoglycinate palladium(II) complex D = (6.5 ± 0.5) × 10⁻⁶ cm²/s was determined from the limiting diffusion current of the complex reduction. The monoglycinate palladium(II) complex reduction occurred in the double-layer segment of the palladium charging curve; it was not complicated by hydrogen adsorption at electrodes. The palladium(II) complex reduction half-wave potential was determined (E _1/2 = ∼0.300 to 0.330 V (SCE)). It is shown that the decreasing of the number of ligands coordinated by palladium via nitrogen atom facilitates the complex reduction process. In particular, the reduction potentials of palladium(II) complexes with different ligand number at palladium electrode shifted markedly toward negative potentials in the series: Pdgly⁺ < Pd(gly)2 < Pd(gly)₄²⁻.     

Triazole‐based ligands functionalized silica: Effects of ligand denticity and donors on catalytic oxidation activity of Pd nanoparticles

Triazole‐based ligands, tris (triazolyl)methanol (Htbtm), bis (triazolyl)‐phenylmethanol (Hbtm), and phenyl (pyridin‐2‐yl)(triazolyl)methanol (Hpytm), with differences in ligand denticity (i.e., bidentate and tridentate) and type of N donors (i.e., triazole and pyridine) were functionalized onto a silica support to produce the corresponding SiO₂‐ L ( L  = tbtm, btm, pytm). Subsequent reactions with Pd (CH₃COO)₂ in CH₂Cl₂ yielded Pd/SiO₂‐ L . ICP‐MS reveals that Pd loadings are higher with increased N loadings, resulting in the following trend: Pd/SiO₂‐tbtm (0.83 mmol Pd g^?1) > Pd/SiO₂‐btm (0.65 mmol Pd g^?1) ~ Pd/SiO₂‐pytm (0.63 mmol Pd g^?1). Meanwhile, TEM images of the used Pd/SiO₂‐ L catalysts after the first catalytic cycle show that the mean size of Pd NPs is highest with Pd/SiO₂‐pytm (8.5 ± 1.5 nm), followed by Pd/SiO₂‐tbtm (6.4 ± 1.6 nm) and Pd/SiO₂‐btm (4.8 ± 1.3 nm). Based on TONs, catalytic studies toward aerobic oxidation of benzyl alcohol to benzaldehyde at 60 °C in EtOH showed that Pd/SiO₂‐pytm possessed the most active surface Pd(0) atoms, most likely as a result of more labile properties of the pyridine–triazole ligand compared to tris‐ and bis (triazolyl) analogs. ICP‐MS and TEM analysis of Pd/SiO₂‐btm indicate minimal Pd leaching and similar average Pd NPs sizes after 1^st and 5^th catalytic runs, respectively, confirming that SiO₂‐btm is an efficient Pd NPs stabilizer. The Pd/SiO₂‐btm catalyst was also active toward aerobic oxidation of various benzyl alcohol derivatives in EtOH and could be reused for at least 7 reaction cycles without a significant activity loss.     

Adsorption of Cu(II), Cd(II), Pb(II), Cr(VI) by double hydroxides on the basis of Al oxide and Zr, Sn, and Ti oxides

It was studied the equilibrium adsorption and adsorption kinetics of Cu(II), Cd(II), Pb(II), and Cr(VI) by composite hydroxides formed by Me _x O _y · nH₂O and Me_0.4–0.7Al_0.6–0.3O _y · nH₂O, where Me = Zr, Sn and Ti. It was estimated the values of the diffusion coefficients of adsorbed ions Cu(II) and Cr(VI) from kinetic values. It was established that the estimated diffusion coefficients of adsorbed ions Cu(II) are in the range 0.4 × 10⁻¹²–2.5 × 10⁻¹² m²/s for individual hydroxides and 1.2 × 10⁻¹²–2.8 × 10⁻¹² m²/s for double hydroxides. The obtained values of diffusion coefficients Cr (VI) for double hydroxides are 0.1 × 10⁻¹⁰–0.4 × 10⁻¹⁰ m²/s.     

Benign synthesis of quinolinecarboxamide ligands,H2bqbenzo and H2bqb and their Pd(II) complexes: X-ray crystal structure,electrochemical and antibacterial studies

Two carboxamide ligands, H₂bqbenzo {3,4-bis(2-quinolinecarboxamido)benzophenone} and H₂bqb {N,N′-bis[(2-quinolinecarboxamide)-1,2-benzene]}, have been prepared using tetrabutylammonium bromide as an environmentally benign reaction medium. Two new Pd(II) complexes, [Pd^II(bqbenzo)] (1) and [Pd^II(bqb)] (2), have been synthesized, characterized, and their structures determined by single crystal X-ray diffraction. The di-anionic ligands, bqbenzo^2? and bqb^2?, are coordinated via two N_amide atoms and the nitrogens of the two quinoline rings, with Pd?N_amide < Pd–N_quinoline bond lengths. The geometry around palladium(II) in both complexes is distorted square planar. The electrochemical behaviors of the ligands and their Pd(II) complexes have been investigated by cyclic voltammetry in DMF. An irreversible Pd^II/I reduction is observed at ?1.06 V for 1 and at ?1.177 V for 2, indicating the influence of the R substituent on the central phenyl ring of carboxamide ligands on the Pd^II/I reduction potential. The ligands and palladium complexes were also screened for in vitro antibacterial activity. The Pd(II) complexes show strong biological activity against S.typhi and E.coli as Gram ?ve and B.cereus and S.aureus as Gram +ve bacteria comparable to the antibiotic penicillin. The antibacterial results also reveal that coordination of Pd(II) significantly improves the activity.     

Kinetic study on the ligand exchange reactions between bis(alkylxanthato)palladium(II)and bis(N,N-dialkyldithiocarbamato)palladium(II)by high-performance liquid chromatography

The rate constants and equilibrium constants of ligand exchange reactions between his(alkylxanthato)palladium(Ⅱ),Pd(S_2COR)_2(R=Am,n-Hex,Bz),and bis(N,N-dialkyldithiocarbamato)palladium(Ⅱ),Pd(S_2CNR_2)_2(K=Et,n-Pr,n-Bu),in chloroform solution have been determined ina temperature range of 20—50°C by means of high-performance liquid chromatography.It was foundthat both the forward and reverse reactions are of second order.All of the equilibrium constants Kdetermined are 10.3±1.0,much greater than the value(K=4)calculated statistically which indicatesthat the ternary complexes are more stable than the binary complexes.The experimental resultsrevealed that the reaction rate decreases with the increase in the size of R and R~1 groups and the latterare more remarkable,consistent with the deduction of steric effect.The activation parameters ofthe reactions have been calculated.In reaction series(11)and(12)(in the text)the isokinetic tempera-tures B=390±8K and β=346±15 K have been observed respectively.A plausiblemechanism in-volving an eight-membered ring intermediate has been proposed on the basis of experimental results.     

Determination of gold,palladium and copper by flame atomic absorption spectrometry after preconcentration on silica gel modified with 3-(2-aminoethylamino)propyl group

A preconcentration method of gold, palladium and copper based on the sorption of Au (III), Pd (II) and Cu (II) ions on a column packed with 3-(2-aminoethylamino)propyl bonded silica gel is described. The modified silica gel was synthesized and characterized by FT-IR and C, H, N elemental analysis. At column preconcentration, the effects of parameters such as pH, volume, flow rate, matrix constituents of solutions and type of eluent on preconcentration of gold, palladium and copper were studied. The recoveries of Au (III), Pd (II) and Cu (II) were 98.93±0.51, 98.81±0.36 and 99.21±0.42 % at 95 % confidence level, respectively. The detection limits (δ) of the elements were 0.032, 0.016 and 0.012 μg ml⁻¹, respectively. The preconcentration method was applied for determination of gold and palladium in certified reference material SARM 7B and copper in river and synthetic seawater by FAAS. Gold, palladium and copper were determined with relative error lower than 10 %.     

Characterization of low molecular weight components of [(ViMe2SiO1/2)x(PhSiO3/2)y(SiO4/2)z], [(ViMe2SiO1/2)x(SiO4/2)y], and [(SiO4/2)x(HO1/2)y(tBuO1/2)z] silsesquioxanes by electrospray ionization fourier transform mass spectrometry (ESI-FTMS)

This paper describes the characterization of low molecular weight components of four materials using electrospray ionization Fourier transform mass spectrometry (ESI-FTMS). The materials in the current study are [(ViMe₂SiO_1/2)_x(PhSiO_3/2)_y(SiO_4/2)_z] (MTQ), [(ViMe₂SiO_1/2)_x(SiO_4/2)_y] (MQ), and [(SiO_4/2)_x(HO_1/2)_y(^tBuO_1/2)_z] (Q) silsesquioxanes. Accurate mass measurements coupled with knowledge of resin chemistry afforded siloxane composition determination that was used to propose specific structures for the oligomers. Branched or linear (T_nQ_mM_n+2m+2), and monocyclic (T_nQ_mM_n+2m) structures are predominant structures for the low molecular weight species in MTQ. For MQ and Q, more condensed structures, such as partially opened cage structures (Q_mM_2m?6 and Q_mM_2m?8), were identified. The differences between MQ, Q, and MTQ are likely attributed to differences in intrinsic structure and reactivity of T and Q building blocks. The structural information obtained for these oligomeric species will ultimately provide a better understanding of new resin materials and their associated physical properties.     

Application of 1-(2-Pyridylazo)-2-naphthol Anchored SiO2 Nanoparticles for the Preconcentration of Trace Pb2+ from Different Water and Food Samples

SiO₂‐PAN nanoparticles has been synthesized by reacting silica nanoparticles with 3‐aminopropyltriethoxysilane, formaldehyde and 1‐(2‐pyridylazo)‐2‐naphthol and characterized by FT‐IR and SEM which were used as new sorbent for the preconcentration of trace amount of Pb²⁺ from various samples. Conditions of the analysis such as preconcentration factor, effect of pH, sample volume, shaking time, elution conditions and effects of interfering ions for the recovery of analyte were investigated. The adsorption capacity of the nanometer SiO₂‐PAN was found to be 168.34 μmol/g at optimum pH and the detection limit (3δ) was 0.63 µg/L. The extractant showed rapid kinetic sorption. The adsorption equilibrium of Pb²⁺ on the nanometer SiO₂‐PAN was achieved within 15 min. Adsorbed Pb²⁺ was easily eluted with 6 mL of 4 mol·L^?1 hydrochloric acid. The maximum preconcentration factor was 50. The method was applied to determine trace amounts of Pb²⁺ in different samples (water and food samples).     

Catalytic kinetic spectrophotometric determination of trace amounts of palladium with dahlia violet after separation and preconcentration on sulphydryl dextran gel

A sensitive and selective kinetic catalytic spectrophotometric method has been described for the determination of trace amounts of palladium(II). The method is based on the catalytic effects of palladium(II) on the reduction reactions of Dahlia Violet with sodium dihydrogen hypophosphite (NaH₂PO₂) in a sulfuric acid medium. Under optimal conditions, trace amounts of palladium(II) can be determined. A good linear range has been obtained in the concentration range of Pd(II) over 0.001–0.028 μg/mL with a detection limit of 5.9 × 10⁻¹⁰ g/mL. The method has been successfully applied to the determination of palladium(II) in ore and soil samples. The relative standard deviation was less than 5.0% (n = 11). The coexisting ions were eliminated by preconcentration and separation on sulphydryl dextran gel with satisfactory results. The text was submitted by the authors in English.