磨盘碾磨聚丙烯粒度分布与接枝率的研究

用分形几何方法研究了磨盘碾磨中聚丙烯 (PP)的粉碎和固相力化学接枝 .用粒度分析仪测定经磨盘碾磨聚丙烯的粒度分布 ,用分形理论处理实验数据 .结果表明 ,PP粒度分布存在无标度区 ,具有线性分形特征 ,磨盘碾磨对PP粒子分形行为有较大影响 ,聚丙烯粒度分布的分维值随碾磨次数的增加而增大 .磨盘碾磨中聚丙烯固相力化学接枝的实验结果表明 ,N 羟甲基丙烯酰胺在聚丙烯表面上的接枝率亦随碾磨次数增加而增加 ,即与聚丙烯粒度分布的分维值相关 .因此 ,可用分数维定量描述聚丙烯粒子在磨盘碾磨中的粉碎规律 ,揭示了N 羟甲基丙烯酰胺在聚丙烯表面固相力化学接枝反应的本质 .     

固相合成及组合化学用的高聚物载体

综述了用于固相合成及组合化学的高聚物载体的制备方法、特征、应用和最新进展,重点介绍了目前广泛用作固相载体的交联聚苯乙烯树脂、聚酰胺树脂和TentaGel树脂,并对几类新型载体如聚乙二醇、聚四氢呋喃衍生物交联剂改性的聚苯乙烯树脂、非芳环体系的POEPOP,树脂和SPOCC树脂作了简要的概述。     

固相力化学方法回收利用废弃聚丙烯/废旧电路板的研究

采用固相力化学技术制备废旧电路板非金属材料(WPCB)改性粉体,填充废弃聚丙烯(PP),制备了高性能废旧PP/WPCB复合材料,研究了固相剪切对WPCB粒度、粒度分布以及PP/WPCB复合材料结构、流变性能和力学性能的影响。结果表明,磨盘碾磨使WPCB粉体体积粒径由282.4μm降到63.5μm,比表面积由0.06m2/g提高到0.14m2/g,粒度分布明显变窄,玻纤与环氧树脂剥离效果明显。固相力化学方法制备WPCB粉体填充废旧PP后,其分散大幅改善,加工性能明显优于未碾磨体系,复合材料力学性能优于纯PP和未经固相力化学处理的PP/WPCB复合材料,相对于纯PP拉伸强度提高14.6%,弯曲模量提高82.5%,缺口冲击强度提高11.2%。得到的材料表面色泽均一、成本低廉,具有良好工业化前景。     

丁二烯-丙烯腈共聚物碳-碳双键的选择性加氢

丁二烯－丙烯腈共聚物碳－碳双键的选择性加氢张邦华,王光,周庆业,郝广杰,宋谋道,张莹（南开大学高分子化学研究所,天津,３０００７１）关键词丁二烯－丙烯腈共聚物,氯化三苯基膦铑,均相催化,选择性加氢通过催化加氢对不饱和高聚物进行化学改性是提高大分子的物...     

辐射接枝聚四氟乙烯的形态结构与结晶性质

<正> 辐射接枝是高聚物改性的重要方法,它特别适用于一般的化学方法难以实现改性的高聚物,如聚四氟乙烯(PTFE)利用辐射接枝改进粘附性取得较好的效益。 不久以前,Yamakowa等人曾对辐射接枝聚乙烯的结构作了讨论。本文用光学显微镜和X-射线等方法对PTFE辐射接枝苯乙烯(St)-丙烯酸(AA)接枝共聚物的超分子     

有机在同聚物改性环氧树脂的方法与机理

综述了有机硅高聚物改性环氧树脂的各种改性方法、反应机理以及改性机理的研究进展。     

聚(3-羟基丁酸酯-co-3-羟基戊酸酯)改性及纤维成形北大核心CSCD

聚(3-羟基丁酸酯-co-3-羟基戊酸酯)(PHBV)是一种微生物发酵生产的热塑性聚合物。从物理、化学改性及其纤维成形两个方面综述了PHBV的研究进展。PHBV的物理改性主要有无机纳米粒子共混体系(PHBV/iNPs)、有机纳米晶共混体系(PHBV/oNPs)、高聚物共混体系(PHBV/Polymer)和绿色全降解共混体系;化学结构构筑主要包括接枝共聚改性、嵌段共聚改性、端基扩链改性等。从改性的手段及介质,分析了改性方法的优缺点。PHBV纤维的成形方法主要有熔融纺丝法、干法纺丝法及静电纺丝法。从PHBV纤维应用领域看,熔融纺纤维应用目标在于替代现有石油基相关产品,而静电纺纤维主要应用于开拓组织工程再生医学领域。最后,对PHBV今后的研究及发展提出了展望。     

基于氨基酸的苯并咪唑合成研究进展

苯并咪唑类化合物在药物化学、生物化学、配位化学以及催化、分子识别、阻燃等领域具有重要应用.氨基酸类化合物是一类来源广泛的功能性合成子,因此近年来基于氨基酸的苯并咪唑合成与功能改性研究受到人们的广泛关注.综述了以各种天然与非天然氨基酸为原料,以溶液法、微波法、固相法等合成技术合成与改性苯并咪唑的新进展.     

SBS改性沥青机理研究进展

介绍了沥青的特性、苯乙烯-丁二烯-苯乙烯三嵌段共聚物(SBS)的性能,分析了SBS与基质沥青之间的溶胀性和相容性问题,着重论述了SBS改性沥青机理的研究进展,指出机理主要分为物理共混和化学改性两类:物理共混——SBS微粒受到沥青组分中油分的作用发生溶胀而均匀分散在沥青中,SBS与沥青之间没有发生化学作用,只是一种分子间作用力;化学改性——加入添加剂使沥青和SBS之间发生加成、交联或接枝等化学反应,形成较强的共价键或离子键,改善沥青的化学性质。提出化学改性是提高SBS改性沥青路用性能的重要手段。     

共焦显微拉曼光谱监测聚合物载体支载的化学反应

在固相载体上进行的有机合成[1-2]以及使用固相载体支载的试剂作为反应物或清除剂[3-4]的有机合成具有产物分离纯化简单、可以使用过量试剂促使反应完全、固相可以重复使用和容易实现自动化合成等诸多优点而受到重视,是组合化学[5-6]及高通量筛选[7]技术中建立分子多样性化合物     

Synthesis and crystal structure of mixed metal(III) tungstenyl(VI) ortho-pyrophosphates

The series of isotypic anhydrous ortho-pyrophosphates M^III(W^VIO₂)₂(P₂O₇)(PO₄) (M: Sc, V, Cr, Fe, Mo, Ru, Rh, In, Ir) was obtained via vapor phase moderated solid state reactions in sealed ampoules. The crystal structure of the phosphates M^III(W^VIO₂)₂(P₂O₇)(PO₄) (M: V, Ru, Rh) was solved from single crystal X-ray data (C2/c, Z = 16). Fairly regular MO₆ and distorted WO₆ octahedra share vertices with PO₄ and P₂O₇ units to form a 3D network. For the ortho-pyrophosphates with M: V³⁺, Cr³⁺, and Fe³⁺ the oxidation state of M is confirmed by magnetic measurements. ³¹P-MAS-NMR spectra of the diamagnetic phosphates M^III(W^VIO₂)₂(P₂O₇)(PO₄) (M: Sc, In, Ir) show surprisingly different isotropic chemical shifts for the seven phosphorus sites. V^III(W^VIO₂)₂(P₂O₇)(PO₄) occurs as equilibrium phase in the quasi-binary system (V_1–xW_x)OPO₄ at x = 0.67 and exhibits a small homogeneity range 0.60 ≤ x ≤ 0.67. The scandium compound shows a fully inverted occupancy of the M sites according to the formulation W(Sc_1/2W_1/2O₂)₂(P₂O₇)(PO₄).     

微波技术在固相配位化学反应中的应用研究(Ⅰ)──CO(Ⅱ)、Ni(Ⅱ)、Cu(Ⅱ)配合物在微波条件下的固相合成

在微波辐射条件下研究了过渡金属[Co（Ⅱ），Ni（Ⅱ），Cu（Ⅱ）的醋酸盐与氨基酸、席夫碱、β-二酮、8-羟基隆琳等有机配体之间的固相配位化学反应，发现微波辐射条件下的固相化学反应与传统加热条件下的固相化学反应相比速度提高了数十倍甚至数百倍，并在此条件下合成出了相应的配合物．     

Lithium Ion Motion in Lithium Nitridoborate Chalcogenides Li5(BN2)Ch (Ch = Se,Te)

The compounds Li₅(BN₂)Se and Li₅(BN₂)Te were synthesized at 900 °C in a closed system utilizing weld shut niobium ampoules and obtained as white microcrystalline powders. Their crystal structures were solved and refined on the basis of single‐crystal X‐ray diffraction data with the space group I4₁md [a = 6.3983(4) Å, c = 11.1072(9) Å for Li₅(BN₂)Se and a = 6.5878(3) Å, c = 11.4382(7) Å for Li₅(BN₂)Te]. The temperature dependent Li⁺ motion was investigated by ⁷Li MAS NMR spectroscopy.     

LiLa5Si4N10O and LiPr5Si4N10O – Chain‐Type Oxonitridosilicates

The isotypic lithium rare‐earth oxonitridosilicates LiLn₅Si₄N₁₀O (Ln = La, Pr) were synthesized at temperatures of 1200 °C in weld shut tantalum ampoules employing liquid lithium as flux. Thereby, a silicate substructure with a low degree of condensation was obtained. LiLa₅Si₄N₁₀O crystallizes in space group P$\bar{1}$ [Z = 1, LiLa₅Si₄N₁₀O: a = 5.7462(11), b = 6.5620(13), c = 8.3732(17) Å, α = 103.54(3), β = 107.77(3), γ = 94.30(3), wR₂ = 0.0405, 1315 data, 96 parameters]. The nitridosilicate substructure consists of loop branched dreier single‐chains of vertex sharing SiN₄ tetrahedra. Lattice energy calculations (MAPLE) and EDX measurements confirmed the electrostatic bonding interactions and the chemical compositions. The ⁷Li solid‐state MAS NMR investigation is reported.     

STUDIES ON THE CHEMICAL STRUCTURES OFACTIVATED CARBON FIBERS BY SOLID STATE NMR

1INTRODUCTIONAsweknoW,theinvestigationofactivatedcarbonfibers(ACFs)hasbecomeaninterestingsubjectincarbonfieldbecauseACFspossessnovelstructures,goodadsorptionabilityandoutstandingoxjdation-reductionpropertyl'].ByuseofsomemoderntechniquessuchasXPS,FTIR,Xosandetc.,peoplehavestUdiedthestructUresofACFsandobtainedsomeinterestingresultS12-].However,therearestillsomelimitsforusingabovetechniquetostudythestructllresofACFs.Forexample,theXPSisonlyusedtostudythebindingstateofatomsonthesurf…     

Synthesis,Crystal Structure and Properties of Li2Cu5(PO4)4

Li₂Cu^II₅(PO₄)₄ has been obtained by various reactions starting from copper or Cu₂O. Crystallization was achieved using I₂ as oxidant and mineralizer. The new orthophosphate crystallizes in space group P$\bar{1}$ , Z = 2, with a = 6.0502(3) Å, b = 9.2359(4) Å, c = 11.4317(5) Å, α = 75.584(2)°, β = 80.260(2)°, γ = 74.178(2)°, at 293 K. Its structure has been determined from X‐ray single‐crystal data and refined to R₁ = 0.022{wR₂ = 0.058 for 4633 unique reflections with F_o > 4σ (F_o)}. From magnetic measurements μ_eff = 1.51 μ_B/Cu and θ_P = –37.4 K have been determined. The Vis/NIR spectrum of aqua‐green Li₂Cu₅(PO₄)₄ shows a single broad band centered around $\bar{1}$ = 12000 cm^–1. Magnetic behavior and spectrum are discussed within the angular overlap model.     

Solid state polymerization of poly(lactic acid): Some fundamental parameters

Poly(lactic acid) (PLA) was submitted to solid state polymerization (SSP) in a fixed bed reactor under nitrogen flow, so as to examine technique efficiency for increasing the molecular weight and hence permitting the reduction of the melt polymerization residence times. In order to use a suitable starting material, SSP prepolymers of low and medium molecular weight were first prepared through solid state hydrolysis of commercial PLA grade under acidic and alkaline conditions. During these degradation runs, hydrolysis involved the random scission of ester groups in the polymer backbone, while the relevant kinetics and the resulting thermal properties were also examined. In a subsequent step, the prepolymers obtained were subjected to SSP at three temperatures, approximately 2.5–25.0 °C below their melting point. The process achieved an increase of up to 1.7 times the initial molecular weight, however, with different trends depending on the prepolymer characteristics, reaction temperature and time, as well as the pH of the hydrolysis medium. In addition to molecular weight build up, the effect of the SSP process on end product thermal properties was also investigated.     

Silver Vanadyl(IV) ortho‐Pyrophosphate: Synthesis,Crystal Structure,and Characterization of the (V≡O)2+ Group

Ag₆(V^IVO)₂(PO₄)₂(P₂O₇) was obtained by reaction of Ag₃PO₄ and (VO)₂P₂O₇ (sealed ampoule, 550 °C, 3 d). The crystal structure of the new mixed ortho‐pyrophosphate was determined from X‐ray single‐crystal data [Pnma, Z = 4, a = 12.759(3) Å, b = 17.340(4) Å, c = 6.418(1) Å, R₁ = 0.071, wR₂ = 0.184 for 3174 unique reflections with F_o > 4σ(F_o), 141 variables]. Ag⁺ ions are located in between layers [(V^IVO)₂(PO₄)₂(P₂O₇)]^6–. Equilibrium relations of the new phosphate to neighboring phases were determined. The electronic structure of the (V^IV≡O)²⁺ group was investigated by polarized electronic absorption spectroscopy (ν̃_1a = 9450 cm^–1, ν̃_1b = 9950 cm^–1, ν̃₂ = 14750 cm^–1), EPR spectroscopy [X‐ and Q‐band, powder and single crystal, orthorhombic crystal g‐tensor with g₁ = 1.9445(3), g₂ = 1.9521(3), g₃ = 1.9695(3)], and magnetic measurements (powder, μ_exp/μ_B = 1.71, Θ_p = –1.7 K).     

[WS4Cu2（Py）4]的合成及晶体结构

(NH_4)_2WS_4、CuCl和(n-Bu)_4NBr在Ar气氛中,90℃下反应10 h,所得产物先后经CH_2Cl_2与CH_3OH处理,得一桔红色晶体。该晶体与吡啶反应,即得到桔红色针状晶体[WS_4Cu_2(Py)_4],属单斜晶系,空间群C2/c,晶胞参数:a=14.109(1),b=12.704(1),c=14.071(1);β=96.97(1)°;Z=4。结构用重原子法解出,经最小二乘法修正,偏离因子R=0.027。     

Synthesis of Cr2(MoO4)3

Studies on the kinetics and mechanism of the reaction leading to Cr₂(MoO₄)₃ have been made using X-ray diffraction and infrared spectroscopy. The apparent activation energy, E=285±22 kJ/mol has been calculated, based on the Ginstling-Brounstein diffusion controlled model.