Synthesis,Photochromic, and Computational Studies of Dithienylethene‐Containing β‐Diketonate Derivatives and Their Near‐Infrared Photochromic Behavior Upon Coordination of a Boron(III) Center

A series of dithienylethene‐containing 1‐thienyl‐3‐aryl‐propane‐1,3‐diones (aryl=phenyl (Ph), thienyl (Th), and 4,5‐bis(2,5‐dimethylthiophen‐3‐yl)thiophen‐2‐yl (DTE‐Th)) and the corresponding boron(III) diketonates, (O^O)BR₂ (R=F, C₆F₅, and Ph), have been designed and synthesized. Their photophysical, electrochemical, and photochromic properties have been studied. Upon coordination of a boron(III) center, the closed forms of the dithienylethene‐containing β‐diketonates show near‐infrared response and the photochromic behavior was also found to be affected by the aryl substituents at the 3‐position of the β‐diketonates. Moreover, computational studies have been performed that help to provide an understanding of the effect of substituents on the photophysical and photochromic properties.     

Thermodynamic Phase Transition Through Crystal‐to‐Crystal Process of Photochromic 1,2‐Bis(5‐phenyl‐2‐propyl‐3‐thienyl)perfluorocyclopentene

A photochromic diarylethene, 1,2‐bis(5‐phenyl‐2‐propyl‐3‐thienyl)perfluorocyclopentene ( 1a ), was found to have two polymorphic crystal forms, α‐ and β‐crystals. From X‐ray crystallographic analysis, the space groups of α‐ and β‐crystals were determined to be P2₁/c and C2/c, respectively. The difference between two crystal forms is ascribed to the orientation of two of four molecules in the unit cell. The thermodynamic phase transition from α‐ to β‐forms occurred via a crystal‐to‐crystal process, as confirmed by differential scanning calorimetry measurements, optical microscopic observations in the reflection mode and under crossed Nicols, and powder X‐ray diffraction measurements. The movement of the molecules in the crystal was evaluated by analyzing the change of face indices before and after the phase transition.     

Synthesis,Coordination, and Spectroscopic Properties of 2,2′‐Bipyridyldimesitylpalladium(II) and 6‐Mesityl‐2,2′‐bipyridyldimesitylpalladium(II)

The synthetic route to the dimesitylpalladium(II) complex [(bpy)PdMes₂] ( 1 ) (Mes = mesityl = 2,4,6‐trimethyl phenyl) does not only give the desired compound but also the 6‐mesityl‐2,2′bipyridyldimesitylpalladium [(6‐Mes‐bpy)PdMes₂] ( 2 ) complex and the free ligand 6,6′‐dimesityl‐2,2′‐bipyridine in reasonable yields. Single crystals of 2 were examined by X‐Ray diffraction. The compound reveals a sterically crowded molecular structure. An intramolecular π‐stacking interaction was found between the mesityl substituent on the bipyridine ligand and the adjacent mesityl ligand. The electrochemical behaviour of 1 and 2 together with a related compound was examined at various temperatures showing two reversible reduction reactions and reversible one‐electron oxidation steps at low temperatures. The latter are assigned to Pd^II/Pd^III couples.     

New Substituted 1‐Aryl‐4,4,6‐Trimethyl‐3,4‐Dihydropyrimidine‐2‐(1H)Thiones; A Metal‐Free and Solvent‐Free Synthesis,Characterization, and Lymphoid Tyrosine Phosphatase Inhibition Studies

A series of fourteen 3,4‐dihydropyrimidine‐2‐thiones ( 3a–n ) were synthesized by a green protocol, and their structures were characterized by spectroanalytical data. The compounds were obtained in high yields by efficient annulation of mesityl oxide (4‐methylpent‐3‐en‐2‐one) with anilines in the presence of potassium thiocyanate. The reaction is essentially metal‐catalyst‐ and solvent‐free, as mesityl oxide itself is the solvent as well as the reactant. The compounds were tested for their ability to inhibit the lymphoid tyrosine phosphatase PTPN22, and 5 of the 14 compounds exhibited IC₅₀ values in the mid‐micromolar range, with the most potent hit being the compound 3d , having a methoxy substituent at the 2‐position of the phenyl ring with an IC₅₀ = 18 ± 1 μM, and second most potent compound ( 3c ) with an IC₅₀ value of 45 ± 3 μM, having methyl substituents at both 2‐ and 4‐position of the phenyl ring.     

苯氧基萘并萘醌衍生物的合成与光致变色性能研究

设计合成了16个新的具有不同迁移基团、不同取代基及双苯氧基萘的苯氧基并萘醌化合物; 通过红外光谱、核磁共振、质谱等方法对其结构进行了表征; 利用紫外-可见光谱研究化合物的光致变色性, 结果表明, 化合物的结构影响其变色性能, 当迁移基团为芳香基时, 其变色性较好; 主链醌环上有取代基时, 化合物成色体最大吸收波长红移; 双苯氧基萘并萘醌化合物较相应的单化合物有较大的摩尔吸光系数; 随着苯基上取代基增大, 其成色速率常数变小.     

A General Strategy to Enhance Donor‐Acceptor Molecules Using Solvent‐Excluding Substituents

While organic donor‐acceptor (D‐A) molecules are widely employed in multiple areas, the application of more D‐A molecules could be limited because of an inherent polarity sensitivity that inhibits photochemical processes. Presented here is a facile chemical modification to attenuate solvent‐dependent mechanisms of excited‐state quenching through addition of a β‐carbonyl‐based polar substituent. The results reveal a mechanism wherein the β‐carbonyl substituent creates a structural buffer between the donor and the surrounding solvent. Through computational and experimental analyses, it is demonstrated that the β‐carbonyl simultaneously attenuates two distinct solvent‐dependent quenching mechanisms. Using the β‐carbonyl substituent, improvements in the photophysical properties of commonly used D‐A fluorophores and their enhanced performance in biological imaging are shown.     

N‐Bridged Annulated BODIPYs: Synthesis of Highly Fluorescent Blueshifted Dyes

A series of novel BODIPY dyes has been prepared through the introduction of an N‐bridged annulated meso ‐phenyl ring at one of the β‐positions of the BODIPY core. An unusual blueshift of the main spectral bands is observed, since the fusion of a meso ‐substituent results in a marked relative destabilization of the LUMO. The greater rigidity of the ring‐fused structure leads to very high fluorescence quantum yields. The position of the main spectral bands can be fine‐tuned by introducing electron withdrawing and donating groups onto the meso ‐phenyl ring.     

Substituent Effects on the Photochromic Properties of Benzothiophene‐Based Derivatives

Five diarylethene photochromic derivatives, the structures of which incorporate a central benzothiophene unit, a left‐hand thiazole group, and a right‐hand benzothiophene group, have been prepared. The compound with a thiazole unit with no substituent on the reaction‐center carbon atom reveals an unprecedented transformation upon light irradiation. When the 4‐position of thiazole is protected by a methyl group, the compounds show high photosensitivity and photochromic properties. In this case, light irradiation affords new compounds with [5]helicene structures featuring the highest redshifted absorption maxima reported to date.     

Phosphorescent Platinum(II) Complexes with Mesoionic 1H‐1,2,3‐Triazolylidene Ligands

The synthesis and characterization of eight unprecedented phosphorescent C^C* cyclometalated mesoionic aryl‐1,2,3‐triazolylidene platinum(II) complexes with different β‐diketonate ligands are reported. All compounds proved to be strongly emissive at room temperature in poly(methyl methacrylate) films with an emitter concentration of 2 wt %. The observed photoluminescence properties were strongly dependent on the substitution on the aryl system and the β‐diketonate ligand. Compared to acetylacetonate, the β‐diketonates with aromatic substituents (mesityl and duryl) were found to significantly enhance the quantum yield while simultaneously reducing the emission lifetimes. Characterization was carried out by standard techniques, as well as solid‐state structure determination, which confirmed the binding mode of the carbene ligand. DFT calculations, carried out to predict the emission wavelength with maximum intensity, were in excellent agreement with the (later) obtained experimental data.     

Synthesis of 1, 3 -dimethyl-3-phenylspiro [indoline —2,2′-(2′H-l-benzopyran)]s and an investigation of the electronic absorption spectra of their merocyanine forms

The synthesis of photochromic indoline spiropyrans containing a phenyl substituent in position 3 has been effected. The electronic absorption spectra of the colored forms of the spiropyrans obtained reveal the properties typical for merocyanine dyes.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1209–1211, September, 1973.     

Chiral discrimination of β‐3‐homo‐amino acids using the kinetic method

Chiral discrimination of seven enantiomeric pairs of β‐3‐homo‐amino acids was studied by using the kinetic method and trimeric metal‐bound complexes, with natural and unnatural α‐amino acids as chiral reference compounds and divalent metal ions (Cu²⁺ and Ni²⁺) as the center ions. The β‐3‐homo‐amino acids were selected for this study because, first of all, chiral discrimination of β‐amino acids has not been extensively studied by mass spectrometry. Moreover, these β‐3‐homo‐amino acids studied have different aromatic side chains. Thus, the emphasis was to study the effect of the side chain (electron density of the phenyl ring, as well as the difference between phenyl and benzyl side chains) for the chiral discrimination. The results showed that by the proper choice of a metal ion and a chiral reference compound, all seven enantiomeric pairs of β‐3‐homo‐amino acids could be differentiated. Moreover, it was noted that the β‐3‐homo‐amino acids with benzyl side chains provided higher enantioselectivity than the corresponding phenyl ones. However, increasing or decreasing the electron density of the aromatic ring by different substituents in both the phenyl and benzyl side chains had practically no role for chiral discrimination of β‐3‐homo‐amino acids studied. When copper was used as the central metal, the phenyl side chain containing reference molecules (S)‐2‐amino‐2‐phenylacetic acid (L ‐Phg) and (S)‐2‐amino‐2‐(4‐hydroxyphenyl)‐acetic acid (L ‐4′‐OHPhg) gave rise to an additional copper‐reduced dimeric fragment ion, [Cu^I(ref)(A)]⁺. The inclusion of this ion improved noticeably the enantioselectivity values obtained. Copyright © 2010 John Wiley & Sons, Ltd.     

Altering the Position of Phenyl Substitution to Adjust Film Morphology and Memory Device Performance

In this study, two structural isomers α‐PBT and β‐PBT, which only differ in the phenyl substituent position on the quinoline chromophore, have been designed and successfully synthesized. The influences of substituent position on the film morphology and the storage performance of the devices were investigated. Both molecules employed in the memory devices exhibited same nonvolatile binary (write‐once‐read‐many‐times; WORM) characteristics, but the switch threshold voltage (Vth) of the β‐PBT‐based device was clearly lower than that of the α‐PBT‐based device. Simulation results demonstrate that the variation of the phenyl substituent position led to different intermolecular stacking styles and thus to varied grain sizes for each film morphology. This work illustrates that altering the phenyl substituent position on the molecular backbone could improve the quality of the film morphology and reduce power consumption, which is good for the rational design of future advanced organic memory devices (OMDs).     

Efficient synthesis and properties of isomeric photochromic diarylethenes having a pyrrole unit

Two new isomeric photochromic diarylethenes with a pyrrole unit have been developed. Their properties, including photochromic behavior, crystal structures, and fluorescent properties, have been investigated. The two isomeric compounds show distinctly different photochromism, both in solution and in the single-crystalline phase: one turns red upon photocyclization whereas the other turns blue, which may be attributed to the different substituent effects.     

Synthesis of 3‐Substituted Benzpyrid‐4‐imino‐2‐oxime Derivatives

Pyrazolone, Isoxazolone, Pyrimidinone, Pyrimidinothione, thiazolidinone and β‐lactam incorporating 2‐oximino benzpyrid‐4‐one derivatives have been synthesized by cyclocondensation addition reaction and cycloaddition of hydrazine hydrate, phenyl hydrazine, hydroxylamine, urea, thiourea, mercapto acetic acid, and chloroacetylchloride, respectively.     

Effects of Phenyl‐ and Methyl‐Substituents on p‐Phenylenediamine,an Electrochemical and Spectral Study

Two series of substituted p‐phenylenediamines have been studied for their electronic effects on redox potential and spectral properties. p‐Phenylenediamines and N,N,N′,N”‐tetramethyl‐p‐phenylenediamine substituted with different numbers of phenyl groups have been synthesized and their cyclic voltammograms have been obtained. The correlation between the substituent number and the redox potential appears linear. The slope reflects the additive effect of electron‐donating methyl and electron‐withdrawing phenyl groups. The absorption spectra of the cation radicals indicate that phenyl‐substituted ones have broad intervalence‐charge transfer bands. The p‐phenylenediamines exhibit different properties from triphenylamines in that the oxidized forms are more stable in CH₃CN then those in CH₂Cl₂. Some of the cation radicals or dications could undergo follow‐up chemical reactions and form products that are more easily oxidized.     

()‐9‐(2‐Bromophenyl)‐7,7‐dimethyl‐1,3,4,5,6,7,8,9‐octahydrofuro[3,4‐b]quinoline‐1,8‐dione

The title compound, C₁₉H₁₈BrNO₃, has potential calcium modulatory properties. The 1,4‐di­hydro­pyridine ring has a very shallow boat conformation and is one of the most planar examples of this moiety. The 2‐bromo­phenyl substituent is in the axial synperiplanar orientation. The quinoline ring has a half‐chair conformation, with the unusual arrangement of the out‐of‐plane atom being on the opposite side of the ring plane to the bromo­phenyl substituent. The mol­ecules are linked into chains by intermolecular hydrogen bonds.     

Linear Free‐Energy Relationships Applied to the 13C NMR Chemical Shifts in 4‐Substituted N‐[1‐(Pyridine‐3‐ and ‐4‐yl)ethylidene]anilines

Two series of 4‐substituted N‐[1‐(pyridine‐3‐ and ‐4‐yl)ethylidene]anilines have been synthesized using different methods of conventional and microwave‐assisted synthesis, and linear free‐energy relationships have been applied to the ¹³C NMR chemical shifts of the carbon atoms of interest. The substituent‐induced chemical shifts have been analyzed using single substituent parameter and dual substituent parameter methods. The presented correlations describe satisfactorily the field and resonance substituent effects having similar contributions for C1 and the azomethine carbon, with exception of the carbon atom in para position to the substituent X. In both series, negative ρ values have been found for C1′ atom (reverse substituent effect). Quantum chemical calculations of the optimized geometries at MP2/6‐31G++(d,p) level, together with ¹³C NMR chemical shifts, give a better insight into the influence of the molecular conformation on the transmission of electronic substituent effects. The comparison of correlation results for different series of imines with phenyl, 4‐nitrophenyl, 2‐pyridyl, 3‐pyridyl, 4‐pyridyl group attached at the azomethine carbon with the results for 4‐substituted N‐[1‐(pyridine‐3‐ and ‐4‐yl)ethylidene]anilines for the same substituent set (X) indicates that a combination of the influences of electronic effects of the substituent X and the π₁‐unit can be described as a sensitive balance of different resonance structures.     

Tunable Photochromism in the Robust Dithienylethene‐Containing Phospholes: Design,Synthesis, Characterization,Electrochemistry, Photophysics,and Photochromic Studies

A series of dithienylethene‐containing phosphole derivatives has been designed, synthesized and characterized. One of the compounds has been characterized by X‐ray crystallography. Upon photoexcitation, the compounds exhibit drastic color changes, ascribed to the reversible photochromic behavior. Their photochromic, photophysical and electrochemical properties have been studied. They show photochromic reactivities with high photocyclization quantum yields. Their photophysical and photochromic properties are found to be facilely tuned in this system by substitution at the phosphole backbone, as well as variation on the extent of π‐conjugation of the phosphole backbone. Some selected compounds have been demonstrated to exhibit photochromic properties in polymethylmethacrylate (PMMA) films.     

Synthesis and Properties of 2‐Phenylbenzoxazole‐Based Luminophores for in situ Photopolymerized Liquid‐Crystal Films

We report the synthesis of a series of blue‐emitting 2‐phenylbenzoxazoles (PBOs) substituted at either the 5‐ or 6‐position of the benzoxazole ring and the para‐position of the phenyl substituent. The thermal and optical properties of the materials can be rationalized in terms of the position of the substituent at the benzoxazole moiety and the electron‐withdrawing or electron‐donating character of the substituents. From the results, we conclude that the combination of an electron‐donating substituent at the benzoxazole fragment and an electron‐withdrawing one at the phenyl fragment has a more marked effect on the electronic properties of the aromatic PBO core than other possibilities. This particular combination gives luminophores that are suitable for optical applications on the basis of their high emission efficiency and photostability. In view of that, oriented films were prepared by in situ polymerization of a mixture of a liquid crystalline direactive matrix containing 5% (w/w) of the luminophore. The films exhibit linearly polarized emission.     

Thermal stability of the ­spironaphthoxazine colored form in ­polymeric siloxanes

In order to improve the thermal stability of colored merocyanine formed by the photochromic reaction of spironaphthoxazine, the spiro compound was incorporated in polymeric siloxanes. They are liquid poly(methylphenylsiloxane) and solid methyl‐ or phenyl‐siloxane resins prepared by the hydrolysis and condensation reactions of the corresponding di‐ or tri‐ethoxysilane. To the polymers the spirooxazine moiety is­bonded covalently. Higher stability of the colored form was not observed in the liquid polysiloxane, but in the solid resins. The phenyl substituent in the resin is more effective than the methyl one for stabilization, suggesting that the bulky substituent in the vicinity of the spirooxazine moiety is important as well as stiff polymer matrices. The phenylsiloxane resin with the spirooxazine moiety was enclosed in rigid sol–gel silica, but a further improvement of the thermal stability was not observed. Copyright © 2002 John Wiley & Sons, Ltd.