以化学键为加和单元研究二元共聚物的玻璃化温度

以玻璃化转变的热力学理论为基础,根据相邻C原子的不同取代情况对主链化学键进行分类,假定化学键的刚性能具有加和性,从而对Gibbs-DiMarzio方程进行了修订,提出了新的Tg-序列结构-共聚物组成关系方程.新方程中包含不同三元组序列的摩尔分率和相关均聚物、周期共聚物的Tg,方程中的所有参数可以通过实验测定或计算得到,没有纯粹的拟合参数,在共聚物的结构与Tg之间建立了直接而唯一的关系,因而此方程可以方便地解释各种共聚物Tg-组成关系曲线.如果二元共聚体系的周期共聚物或交替共聚物尚未合成,还可以通过该方程由无规共聚物的Tg-组成曲线对其Tg进行预测.将该方程应用到MMA-St、E-VAc无规共聚物,得到很好的结果.     

Preparation and nonlinear optical properties of two acrylate polymers bearing different long conjugated pendants

Two new acrylate monomers containing different long π-election conjugation bridge structure, 4′-[(N,N-diethylacrylate) amino], 4-(pyridine-4-vinyl) stilbene (DAS) and 4′-[(N,N-diethylacrylate) amino], 4-(pyridine-4-vinyl) azobenzene (DAA), were synthesized and their copolymers with methyl methacrylate (MMA) were prepared by free radical polymerization method. Their structures and properties of these copolymers were characterized and evaluated by FTIR, ¹H-NMR, UV spectra, GPC and Z-scan technique with 8 ns pulses at 532 nm wavelength. The relationship between their structures and properties was investigated. The results show that the structure of these resultant copolymers can be effectively tuned by simply varying the feed ratio and these copolymers exhibit good solubility and large third-order nonlinear optical properties. The large third-order nonlinear optical properties are mainly attributed to the substituted NLO-chromophore with long D-π-A conjugated structure. Simultaneously, it is found that poly (DAA-co-MMA) with N=N double bond as conjugation bridge has larger third-order nonlinear optical susceptibility than poly (DAS-co-MMA) with C=C double bond as conjugation bridge owing to more effective π electron conjugation effect.     

13C nuclear magnetic resonance studies on the stereochemical configurations of 2,4-dimethoxypentane and poly(alkyl vinyl ethers)

¹³C nuclear magnetic resonance (CMR) spectra were obtained for 2,4-dimethoxypentane, which is a model compound of poly(methyl vinyl ether), and the effects of the solvent and temperature on the chemical shifts were investigated. CMR spectra of poly-(alkyl vinyl ethers) were also determined and analyzed. The diad tacticities were obtained from β-methylene carbon resonances of poly(methyl vinyl ether), poly(ethyl vinyl ether), and poly(isobutyl vinyl ether), but not from those of poly(isopropyl vinyl ether) and poly(tert-butyl vinyl ether). The methoxyl carbon resonance of poly(methyl vinyl ether) and the ethoxyl methylene carbon resonance of poly(ethyl vinyl ether) showed splittings corresponding to pentad and triad sequences, respectively. The α-methine and quaternary carbon resonances of poly(tert-butyl vinyl ether) showed splittings corresponding to pentad and triad sequences, respectively.     

Development of poly(ε-caprolactone-co-l-lactide) and poly(ε-caprolactone-co-δ-valerolactone) as new degradable binder used for antifouling paint

Copolyesters containing ε-caprolactone and l-lactide or ε-caprolactone and δ-valerolactone at different compositions were synthesized by using tetrabutoxytitane Ti(OBu)₄ at high temperature in bulk. A series of copolyesters were prepared by varying the compositions of both comonomers. These copolymers were characterized by using ¹H NMR, ¹³C NMR, gel permeation chromatography (GPC), differential scanning calorimetry (DSC) and MALDI-TOF mass spectrometry. ¹³C NMR analysis gave an insight on their microstructure. Structural parameters of the copolymers were obtained by calculating the triad sequence fractions. Poly(ε-caprolactone-co-l-lactide) has a more alternate structure than poly(ε-caprolactone-co-δ-valerolactone). The potential use of these copolyesters in antifouling coatings was examined because of their solubility in aromatic solvent and their hydration and hydrolytic degradation. Paints based on these new degradable binders had a good antifouling activity in Atlantic Ocean (France).     

Alternating copolymerization of ethylene and propene with the [ethylene(1-indenyl)(9-fluorenyl)]zirconium dichloridemethylaluminoxane catalyst system

The copolymerization of ethylene and propene was conducted at −40°C with the [ethylene(1-indenyl)(9-fluorenyl)]zirconium dichloride-methylaluminoxane catalyst system, and the microstructure of the resulting copolymers was analyzed in detail by ¹³C NMR. The content of alternating [EP] sequences increased markedly with an increase in the feed ratio of propene to ethylene. A poly(ethylene-co-propene) with a proportion of [EP] sequences over 95% was thus obtained under appropriate copolymerization conditions. It was also demonstrated that the alternating ethylene-propene copolymer is stereoregular and isotactic.     

Helix-sense-selective copolymerization of phenyl[bis(2-pyridyl)]methyl methacrylate,diphenyl(2-pyridyl)methyl methacrylate and triphenylmethyl methacrylate with chiral anionic initiators

Optically active poly[triphenylmethyl methacrylate-co-phenyl[bis(2-pyridyl)]methyl methacrylate] (poly[TrMA-co-PB2PyMA], poly[diphenyl(2-pyridyl)methyl methacrylate-co-phenyl[bis(2-pyridyl)]methyl methacrylate] (poly[D2PyMA-co-PB2PyMA]), and poly[triphenylmethyl methacrylate-co-diphenyl(2-pyridyl)-methyl methacrylate] (poly[TrMA-co-D2PyMA]) were prepared by helix-sense-selective copolymerization with complexes of organolithium with (−)-sparteine [(−)Sp],(S, S)-(+)- and (R, R)-(−)-2,3-dimethoxy-1,4-bis(dimethylamino)butane [(+)- and (−)DDB], and (S)-(+)-2-(1-pyrrolidinylmethyl)pyridine [(+)PMP] as anionic initiators in toluene at low temperature. The copolymers obtained with (−)Sp and (+)DDB or (−)DDB complexes of organolithium showed low optical activity, but to [(+)PMP] complex with N,N′-diphenyleneamine monolithium amide [(+)PMP–DPEDA–Li)] was effective in synthesizing copolymers of high optical rotation ([α] about +320 to + 370°) which were comparable to those of corresponding homopolymers with one-handed helical structure. The optical rotations of poly[TrMA-co-PB2PyMA] and poly[TrMA-co-D2PyMA] were much more stable than that of poly(D2PyMA) or poly(PB2PyMA) in a solution of CHCl₃–2,2,2-trifluoroethanol (10 : 1, v/v) at 25°C, but optical rotation of poly[D2PyMA-co-PB2PyMA] slowly decreased with time in the same conditions. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2127–2133, 1998     

Synthesis of Conjugated Polymers via Transition Metal Catalysed C−H Bond Activation

Transition metal catalysed C−H bond activation chemistry has emerged as an exciting and promising approach in organic synthesis. This allows us to synthesize a wider range of functional molecules and conjugated polymers in a more convenient and more atom economical way. The formation of C−C bonds in the construction of pi-conjugated systems, particularly for conjugated polymers, has benefited much from the advances in C−H bond activation chemistry. Compared to conventional transition-metal catalysed cross-coupling polymerization such as Suzuki and Stille cross-coupling, pre-functionalization of aromatic monomers, such as halogenation, borylation and stannylation, is no longer required for direct arylation polymerization (DArP), which involve C−H/C−X cross-coupling, and oxidative direct arylation polymerization (Ox-DArP), which involves C−H/C−H cross-coupling protocols driven by the activation of monomers’ C(sp²)−H bonds. Furthermore, poly(annulation) via C−H bond activation chemistry leads to the formation of unique pi-conjugated moieties as part of the polymeric backbone. This review thus summarises advances to date in the synthesis of conjugated polymers utilizing transition metal catalysed C−H bond activation chemistry. A variety of conjugated polymers via DArP including poly(thiophene), thieno[3,4-c]pyrrole-4,6-dione)-containing, fluorenyl-containing, benzothiadiazole-containing and diketopyrrolopyrrole-containing copolymers, were summarized. Conjugated polymers obtained through Ox-DArP were outlined and compared. Furthermore, poly(annulation) using transition metal catalysed C−H bond activation chemistry was also reviewed. In the last part of this review, difficulties and perspective to make use of transition metal catalysed C−H activation polymerization to prepare conjugated polymers were discussed and commented.     

Modeling of cw-EPR spectra of propagating radicals in methacrylic polymerization at different temperatures

The temperature dependence of the cw-EPR spectra corresponding to the propagating radical responsible for the polymerization of methacrylic monomers has been simulated by an integrated computational approach that determines the structural and magnetic parameters (via quantum mechanical calculations) and diffusive properties (via hydrodynamic based methods), which represent the overall input of the stochastic Liouville equation that yields the spectrum. The system has been modeled as a rotator with only one relaxation process, the rotation around the C alpha-C beta bond. The simulations clearly indicate that the change of the spectral shape with the temperature is essentially related to the internal flexibility of the radical end.     

NMR analysis and triad sequence distributions of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Polyhydroxyalkanoates (PHAs) are considered promising “green” alternatives to synthetic polymers because they are bio-derived, biodegradable and biocompatible. The properties of bacterial PHA copolymers depend on their microstructures, which can be modified with the use of different fermentation processes and feed materials. Thus, it is desirable to have an improved testing method for the determination of PHA microstructures. In this work, a detailed NMR analysis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) microstructure was made. Previously only two of the hydroxyvalerate ¹³C NMR peaks have been assigned at the triad level. In this work, three of the ¹³C hydroxyvalerate peaks and two of the hydroxybutyrate peaks were found to be split into four peaks each due to comonomer sequence effects. Using eight copolymer samples with a wide compositional range, we were able to assign all these peaks to B-centered and V-centered triad sequences. Through curve deconvolution, the triad intensities were determined. These triad sequence intensities can then be analyzed via both the first-order Markovian and two-component Bernoullian models to obtain more in-depth information on copolymer composition and comonomer reactivities.     

Thermo-induced formation of unimolecular and multimolecular micelles from novel double hydrophilic multiblock copolymers of N,N-dimethylacrylamide and N-isopropylacrylamide

Two novel double hydrophilic multiblock copolymers of N,N-dimethylacrylamide and N-isopropylacrylamide, m-PDMAp-PNIPAMq, with varying degrees of polymerization (DPs) for PDMA and PNIPAM sequences (p and q) were synthesized via consecutive reversible addition-fragmentation chain transfer (RAFT) polymerizations using polytrithiocarbonate (1) as the chain transfer agent (Scheme 1), where PDMA is poly(N,N-dimethylacrylamide) and PNIPAM is poly(N-isopropylacrylamide). The DPs of PDMA and PNIPAM sequences were determined by 1H NMR, and the block numbers, i.e., number of PDMAp-PNIPAMq sequences (n), were obtained by comparing the molecular weights of multiblock copolymers to that of cleaved products as determined by gel permeation chromatography (GPC). m-PDMA42-PNIPAM37 and m-PDMA105-PNIPAM106 multiblock copolymers possess number-average molecular weights (Mn) of 4.62x10(4) and 9.53x10(4), respectively, and the polydispersities (Mw/Mn) are typically around 1.5. Block numbers of the obtained multiblock copolymers are ca. 4, which are considerably lower than the numbers of trithiocarbonate moieties per chain of 1 (approximately 20) and m-PDMAp precursors (approximately 6-7). PDMA homopolymer is water soluble to 100 degrees C, while PNIPAM has been well known to exhibit a lower critical solution temperature (LCST) at ca. 32 degrees C. In aqueous solution, m-PDMA42-PNIPAM37 and m-PDMA105-PNIPAM106 multiblock copolymers molecularly dissolve at room temperature, and their thermo-induced collapse and aggregation properties were characterized in detail by a combination of optical transmittance, fluorescence probe measurements, laser light scattering (LLS), and micro-differential scanning calorimetry (micro-DSC). It was found that chain lengths of PDMA and PNIPAM sequences exert dramatic effects on their aggregation behavior. m-PDMA105-PNIPAM106 multiblock copolymer behaves as protein-like polymers and exhibits intramolecular collapse upon heating, forming unimolecular flower-like micelles above the thermal phase transition temperature. On the other hand, m-PDMA42-PNIPAM37 multiblock copolymer exhibits collapse and intermolecular aggregation, forming associated multimolecular micelles at elevated temperatures. The intriguing aggregation behavior of this novel type of double hydrophilic multiblock copolymers argues well for their potential applications in many fields such as biomaterials and biomedicines.     

Hydrophilic poly(ethylene oxide)–aramide segmented block copolymers

The present paper discusses block copolymers with segments of either poly(ethylene oxide), poly(propylene oxide), or mixtures of poly(ethylene oxide)/poly(propylene oxide) and monodisperse aramide segments. The length of the polyether segments as well as the concentration of polyethylene oxide was varied. The synthesized copolymers were analyzed by DSC, FTIR, AFM and DMTA. In addition, the hydrophilicity was studied.The crystallinity of the monodisperse aramide segments was found to be high and the crystals, dispersed in the polyether phase, displayed a nano-ribbon morphology. The PEO segments were able to crystallize and this crystalline phase reduced the low-temperature flexibility. The PEO crystallinity and melting temperature could be strongly reduced by copolymerization with PPO segments. By using mixtures of PEO and PPO segments, hydrophilic copolymers with decent low-temperature properties could be obtained.     

Biomimetic stimulus-responsive star diblock gelators

Novel biomimetic gelators with star diblock copolymer architectures have been synthesized by atom-transfer radical polymerization (ATRP). Two types of trifunctional ATRP initiator were used to polymerize 2-(methacryloyloxy)ethyl phosphorylcholine [MPC] at 20 degrees C, followed by sequential monomer addition of various tertiary amine methacrylates or mixtures thereof. Poor living character was achieved using an amide-based trifunctional initiator, but the analogous triester initiator gave reasonably well-defined thermo-responsive and pH-responsive star diblock copolymers. The most effective thermo-responsive gelators were obtained by the statistical terpolymerization of 2-(dimethylamino)ethyl methacrylate [DMA], 2-(diethylamino)ethyl methacrylate [DEA], and a monomethoxy-capped poly(propylene oxide) methacrylate [PPOMA], whereas pH-responsive gelators were prepared using 2-(diisopropylamino)ethyl methacrylate [DPA] as the second monomer. Star diblock copolymer gelators that were both thermo-responsive and pH-responsive were obtained by the statistical copolymerization of DMA with DPA. Copolymer compositions were assessed by 1H NMR spectroscopy, and the molecular weight distributions of the three-arm star MPC homopolymer precursors were assessed by aqueous gel permeation chromatography. Static light scattering was used to obtain weight-average molecular weights of selected star diblock copolymers and rheological measurements and variable-temperature 1H NMR were used to probe the onset of gelation.     

Synthesis of sulfonated poly(diphenylacetylene)s with high CO2 permselectivity

High‐molecular‐weight poly[1‐phenyl‐2‐(4‐t‐butylphenyl)acetylene], poly[1‐phenyl‐2‐(4‐trimethylsilylphenyl) acetylene], and their copolymers were synthesized by the polymerization with TaCl₅–n‐Bu₄Sn. The obtained polymers were sulfonated by using acetyl sulfate to give sulfonated poly(diphenylacetylene)s with different degrees of substitution. The degrees of sulfonation of poly[1‐phenyl‐2‐(4‐t‐butylphenyl)acetylene] and copolymers were in the range of 0.57–0.85. When poly[1‐phenyl‐2‐(4‐trimethylsilylphenyl)acetylene] was sulfonated, the sulfonated poly(diphenylacetylene) with the highest degree of sulfonation was obtained among all the polymers in this study. Its degree of sulfonation was 1.55. All the sulfonated polymers exhibited high CO₂ permselectivity, and their CO₂/N₂ separation factor were over 31. The sulfonated poly(diphenylacetylene) with the highest degree of sulfonation showed the highest CO₂/N₂ separation factor of 75. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6463–6471, 2009     

Stereostructures of hydrogenated poly(1,4‐(1‐arylbutadienes)) prepared by anionic initiators studied by means of NMR

Poly(1,4‐(1‐phenylbutadiene)) (poly1BP) and poly(1,4‐(1‐biphenylylbutadiene)) (poly1BPB) polymerized anionically in tetrahydrofuran (THF) have microstructures of 90.9 and 96.4% of 1,4 units, and 9.1 and 3.6% of 3,4 units, respectively, as determined by 400 MHz ¹H NMR. However, poly(1,4‐(1‐naphthylbutadiene)) (poly1NB) and poly(1,4‐(1‐phenanthrylbutadiene)) (poly1PAB) have 1,4 structures only. The ¹³C NMR spectra of the alternating copolymers of arylethylenes and ethylene obtained by hydrogenation of the poly(1,4‐(1‐arylbutadienes)) show a fine structure that can be attributed to dyad or triad stereosequences. These spectra indicate that the alternating (arylethylene/ethylene) copolymers prepared from poly1BPB, poly1NB, and poly1PAB slightly favor isotactic structures.     

亲水改性PBS基共聚物的N435酶降解差异性及分子模拟

在水相体系中, 采用脂肪酶Novozym435对聚丁二酸丁二醇酯(PBS)分子主链中氧醚键在醇段和酸段的不同位置的共聚物聚(丁二酸丁二醇-co-丁二酸二甘醇酯)[P(BS-co-BDGA)]和聚(丁二酸丁二醇-co-二甘醇酸丁二醇酯)[P(BS-co-DEGS)]进行酶促降解研究. 以分子对接模拟探讨了酶对亲水性底物的识别及相互作用机制. 通过对降解前后不同摩尔比的共聚物薄膜的质量损失率、 亲水性、 热性能以及降解产物的分析, 研究了PBS改性共聚物的降解规律. 结果表明, 随着降解时间的推移, 所有共聚物薄膜的质量损失率升高, 亲水性增强, 热分解温度升高; 降解5 d后, P(BS-co-BDGA)降解产生的低聚物种类比P(BS-co-DEGS)的多. 分子对接结果表明, 醚键在酸段的P(BS-co-BDGA)型酯键与Novozym435酶活性位点的结合比醚键在醇段的P(BS-co-DEGS)型酯键更稳定, 因此, 在N435脂肪酶作用下, P(BS-co-BDGA)比P(BS-co-DEGS)的降解效果好. 实验结果表明, 当DGA摩尔分数为20%时, 降解效果最佳.     

Synthesis and self-assembly behaviors of well-defined poly(lauryl methacrylate)-block-poly[N-(2-methacryloylxyethyl)pyrrolidone] copolymers

A series of structurally controllable poly(lauryl methacrylate)-b-poly[N-(2-methacryloylxyethyl)pyrrolidone], PLMA-b-PNMP, diblock copolymers were synthesized by reversible addition–fragmentation chain transfer polymerization. The self-assembly behaviors of PLMA-b-PNMP in a selective solvent, tetrahydrofuran (THF), were studied by employing static light scattering, dynamic light scattering, and transmission electron microscopy in detail. The relationships between the aggregation parameters, such as critical micelle concentration and the aggregation number (N _agg), and the molecular structure were established. It was found that spherical micelles can be formed once the solvophobic block length of poly[N-(2-methacryloylxyethyl)pyrrolidone] is larger than 215. Moreover, extremely small and monodisperse gold nanoparticles (<2 nm) were synthesized by employing PLMA-b-PNMP diblock copolymers in THF.     

Determination of microstructure and glass-transition temperature of acrylonitrile-methyl acrylate copolymers by 13C-NMR spectroscopy

Acrylonitrile-methyl acrylate (A/M) copolymers of different monomer compositions were prepared by bulk polymerization using free radical initiator (benzoyl peroxide). Copolymer compositions were determined by elemental analyses and comonomer reactivity ratios were determined by the nonlinear least squares errors-in-variables methods (EVM). Terminal and penultimate reactivity ratios have been calculated using the observed monomer triad sequence distribution determined from ¹³C{¹H}-NMR spectra. The triad sequence distribution was used to calculate diad concentrations, conditional probability parameters, number-average sequence lengths, and run number in the copolymers. The observed triad sequence concentrations determined from ¹³C{¹H}-NMR spectrum agreed well with those calculated from reactivity ratios. Glass transition temperatures (T_g) of various copolymers determined from DSC gave good agreement with those obtained from NMR. © 1992 John Wiley & Sons, Inc.     

Platinum(II) 1,10-phenanthroline complexes of acetylides containing redox-active groups

The new diimine ligand 3,8-di-n-pentyl-4,7-di(phenylethynyl)-1,10-phenanthroline (1) was used for the synthesis of a range of Pt(II) complexes, viz.[Pt(1)Cl2], [Pt(1)(C triple bond C-Ph)2], [Pt(1)(C triple bond C-Fc)2] and [Pt(1)(C triple bond C-p-C6H4-C triple bond C-Fc)2](Fc = ferrocenyl). Crystal structure analyses were performed for [Pt(1)Cl2] and [Pt(1)(C triple bond C-Ph)2] and revealed that the di(acetylide)pi-tweezer of the latter binds a molecule of chloroform through C-H...pi hydrogen bonds. The redox and optical properties of 1 and its complexes were investigated by (spectro-)electrochemistry, UV-Vis and luminescence spectroscopy, and an energy level diagram was derived for [Pt(1)(C triple bond C-Fc)2] and related compounds on the basis of the data collected. The ferrocenyl-substituted Pt(II) complexes are donor-sensitiser assemblies. Intramolecular quenching of the photoexcited Pt(II) diimine unit leads to very short luminescence lifetimes for [Pt(1)(C triple bond C-p-C(6)H(4)-C triple bond C-Fc)2](2 ns) and [Pt(1)(C triple bond C-Fc)2](0.3 ns), as opposed to [Pt(1)(C triple bond C-Ph)2](0.7 micros). Excimer formation has been observed for [Pt(1)(C triple bond C-Ph)(2)] at room temperature in dichloromethane and at low temperatures in frozen glassy dichloromethane and 2-methyltetrahydrofuran solution, but not in the solid state.     

Poly(lactide) stereocomplexes: formation, structure, properties, degradation, and applications

Poly(lactide)s [i.e. poly(lactic acid) (PLA)] and lactide copolymers are biodegradable, compostable, producible from renewable resources, and nontoxic to the human body and the environment. They have been used as biomedical materials for tissue regeneration, matrices for drug delivery systems, and alternatives for commercial polymeric materials to reduce the impact on the environment. Since stereocomplexation or stereocomplex formation between enantiomeric PLA, poly(L-lactide) [i.e. poly(L-lactic acid) (PLLA)] and poly(D-lactide) [i.e. poly(D-lactic acid) (PDLA)] was reported in 1987, numerous studies have been carried out with respect to the formation, structure, properties, degradation, and applications of the PLA stereocomplexes. Stereocomplexation enhances the mechanical properties, the thermal-resistance, and the hydrolysis-resistance of PLA-based materials. These improvements arise from a peculiarly strong interaction between L-lactyl unit sequences and D-lactyl unit sequences, and stereocomplexation opens a new way for the preparation of biomaterials such as hydrogels and particles for drug delivery systems. It was revealed that the crucial parameters affecting stereocomplexation are the mixing ratio and the molecular weight of L-lactyl and D-lactyl unit sequences. On the other hand, PDLA was found to form a stereocomplex with L-configured polypeptides in 2001. This kind of stereocomplexation is called "hetero-stereocomplexation" and differentiated from "homo-stereocomplexation" between L-lactyl and D-lactyl unit sequences. This paper reviews the methods for tracing PLA stereocomplexation, the methods for inducing PLA stereocompelxation, the parameters affecting PLA stereocomplexation, and the structure, properties, degradation, and applications of a variety of stereocomplexed PLA materials.     

Polymeric catechol derivatives. IV. Polymerization behavior of 4-vinylcatechols and some properties of their polymeric derivatives

The polymerization and copolymerization of 4-vinylcatechols, such as 2-(0-methyl)-4-vinylcatechol (I), 3,4-dimethoxystyrene (II), and 3,4-methylenedioxystyrene (III), were investigated in cyclohexanone at 30°C, using tri-n-butylborane as an initiator. The reactions yielded vinyl polymers and copolymers. The copolymerization parameters of I–III were determined; their Q and e values were found to be similar to those of styrene and vinylhydroquinone. The copolymerization of I–III gave copolymers of a highly alternating character. The thermal stability of the polymers and copolymers so obtained was also studied. The redox potentials of hydroloyzed poly(I) were examined; the reverse “polymer effect” was observed.