A diastereoselective synthesis 1-trimethylsilyl-(E)-1,3-alkenynes and a simple synthesis of alkyl trimethylsilylethynyl ketones via organoboranes

A convenient, novel diastereoselective synthesis of 1-trimethylsilyl-(E)-1,3-alkenynes and a convenient synthesis of alkyl trimethylsilylethynyl ketones based on Z-1-bromo-1-alkenylboronate esters are developed. α-Bromo-(Z)-1-alkenylboronate esters readily available using literature procedures smoothly undergo a reaction with trimethylsilylethynyllithium (derived from the deprotonation of trimethylsilylethyne with n-butyllithium) in tetrahydrofuran to provide the corresponding ‘ate’ complexes. These ‘ate’ complexes undergo intramolecular nucleophilic substitution reactions to afford the corresponding (E)-1-alkenylboronate esters containing trimethylsilylethynyl moiety which upon protonolysis with acetic acid provide the corresponding 1-trimethylsilyl-(E)-1,3-alkenynes in good yields (70-82%) and in high stereochemical purities (>98%). These intermediates upon oxidation with hydrogen peroxide and sodium acetate afford the corresponding alkyl trimethylsilylethynyl ketones in good yields (66-78%).     

A novel synthesis of (Z)-2-(1-trimethylgermyl-1-alkenyl)-1,3,2-dioxaborinanes and their conversion into carboxylic acids

A novel procedure for preparing heterocyclic compounds such as (Z)-2-(1-trimethylgermyl-1-alkenyl)-1,3,2-dioxaborinanes based on 1-trimethylgermyl-1-alkynes is described. 1-Trimethylgermyl-1-alkynes easily obtainable by deprotonation of 1-alkynes with n-butyllithium followed by treatment with trimethylgermanium chloride, are readily hydroborated in n-pentane in the presence of boron trichloride in hexane at 0 °C for 3 h. The resulting supernatant clear solution was separated from boron trichloride-methyl sulfide complex. It was then reacted with 1,3-propane diol at 0 °C for 0.5 h. The resulting representative (Z)-2-(1-trimethylgermyl-1-alkenyl)-1,3,2-dioxaborinanes were isolated in good yields (65-86%) and in high stereochemical purities (>98%) as evidenced by NMR spectral data. The carbon skeletons present in these intermediates were confirmed by alkaline hydrogen peroxide oxidation to the corresponding carboxylic acids.     

Enantioselective, (−)-sparteine-mediated deprotonation of geranyl and neryl N,N-diisopropylcarbamate: configurational stability of the intermediate lithium compounds

(E)/(Z)-Isomeric allylic carbamate esters were deprotonated by n-butyllithium/(−)-sparteine in toluene. Trapping experiments with chlorotrimethylsilane afforded the α-substitution products, with (R)-configuration, revealing that the pro-S proton is removed predominantly to form the corresponding (S)-lithium·(−)-sparteine derivatives; k_S/k_R>15:1 and >7:1, respectively. A slow (S)→(R)-epimerization occurs at −78 °C (T_1/2>60 min). The allylic double bond is stable to (Z)-(E) isomerization under these conditions.     

Facile hydroboration of (Z)-1-trimethylsilyl-1-alkenes with dichloroborane-dioxane complex: An easy access to gem-dimetalloalkanes containing boron and silicon

(Z)-1-trimethylsilyl-1-alkenes easily prepared by the hydroboration of the corresponding 1-trimethylsilyl-1-alkynes followed by protonolysis with acetic acid, readily react with dichloroborane-dioxane complex in dichloromethane for 6 h. The resulting solution is then treated with 1,3-propane diol in dichloromethane at 0 °C for half an hour to provide the corresponding gem-dimetalloalkanes containing boron and silicon. These α-trimethylsilylalkylboronate esters are purified by vacuum distillation in high yields (72-84%) and the structures of these novel intermediates are further confirmed by selective oxidation with alkaline hydrogen peroxide to provide the corresponding alcohols containing α-trimethylsilyl group in 78-88% isolated yields.     

A simple synthesis of B-2-(1-trimethylsilyl-1-alkyl)-1,3,2-dioxaborinanes. Isolation and selective oxidation to 1-trimethylsilyl-1-alkanols

(Z)-1-Trimethylsilyl-1-alkenes easily prepared by the hydroboration of the corresponding 1-trimethylsilyl-1-alkynes followed by protonolysis with acetic acid, readily react with dibromoborane-methyl sulfide complex in dichloromethane for 6 h. The resulting solution is then treated with 1,3-propane diol in a 1:1 mixture of dichloromethane and n-pentane at 0°C for half an hour to provide the corresponding gem-dimetalloalkanes containing boron and silicon. These alpha-trimethylsilylalkylboronate esters are purified by vacuum distillation in high yields (72-84%) and the structures of these novel intermediates are further confirmed by selective oxidation with alkaline hydrogen peroxide to provide the corresponding alcohols containing trimethylsilyl group.     

Novel (E)- and (Z)-3(5)-(2-hydroxyphenyl)-4-styrylpyrazoles from (E)- and (Z)-3-styrylchromones: the unexpected case of (E)-3(5)-(2-hydroxyphenyl)-4-(4-nitrostyryl)pyrazoles

An efficient synthetic method for the preparation of (E)- and (Z)-3(5)-(2-hydroxyphenyl)-4-styrylpyrazoles has been developed. The reaction of (E)- and (Z)-3-styrylchromones with hydrazine hydrate afforded the corresponding (E)- and (Z)-4-styrylpyrazoles, respectively, saved 4′-nitro-derivatives where both (E)- and (Z)-4′-nitro-3-styrylchromones afforded (E)-3(5)-(2-hydroxyphenyl)-4-(4-nitrostyryl)pyrazoles. The reaction mechanism for these transformations was discussed and the stereochemistry of all products was assigned by NMR experiments.     

(E)-Selective Wittig reactions of Garner's aldehyde with nonstabilized ylides

In the Wittig olefination reactions of Garner's aldehyde with certain nonstabilized ylides, the (E)-alkenes could be produced as a major product by simply quenching the reactions with a large excess of MeOH at −78 °C. Even under the salt-free conditions, more than a 10:1 ratio of the (E)- to (Z)-alkene was resulted consistently from the ylides of a linear alkyl chain. Without addition of MeOH, usual selectivity for the (Z)-alkene was obtained in a ratio of 94:6.     

Triphenylphosphine as an effective catalyst for ketoximes addition to acylacetylenes: regio- and stereospecific synthesis of (E)-(O)-2-(acyl)vinylketoximes

Triphenylphosphine catalyzes the regio- and stereospecific addition of ketoximes to acylacetylenes, whereas classical conditions using acetylene (KOH/DMSO, 70 °C) are unsuitable for this purpose. The reaction proceeds under mild conditions (CH₂Cl₂, rt, 7 h) to afford (E)-(O)-2-(acyl)vinylketoximes (92-98% stereoselectivity) in a yield of up to 85%. The (E)-adducts obtained are energetically less favorable than the corresponding (Z)-isomers and are gradually enriched with (Z)-isomers, thus indicating the kinetic control of (E)-stereoselectivity of the reaction.     

Asymmetric epoxidation of (Z)-enol esters catalyzed by titanium(salalen) complex with aqueous hydrogen peroxide

Titanium(salalen) complex 1 was an effective catalyst for asymmetric epoxidation of enol esters. Although (E)-enol esters were reluctant to proceed, (Z)-enol esters underwent asymmetric epoxidation to give the epoxides in high yields with high enantioselectivity ranging from 86 to >99% ee in the presence of aqueous hydrogen peroxide as the stoichiometric oxidant. Complete enantioselectivity was observed in the reaction of (Z)-3,3-dimethylbut-1-en-1-yl 4-methoxybenzoate. The obtained epoxide was readily transformed into the corresponding 1,2-diol by reduction with lithium borohydride without erosion of the high enantiomeric excess.     

Reactions of (Z)-3-aryl-3-chloropropenals with nucleophiles: stereoselective formation of (E)-vinylogous esters, (E)-vinylogous amides, and vinamidinium salts

The highly stereoselective conversions of (Z)-3-aryl-3-chloropropenals to (E)-3-alkoxy-3-arylpropenals, to (E)-3-aryl-3-morphorlinopropenals, and to vinamidinium salts are reported. The stereochemical assignments were based on 2D-NMR experiments.     

Asymmetric synthesis of the marine alkaloid (−)-(S)-nakinadine C

The first asymmetric synthesis of the marine alkaloid (−)-(S)-nakinadine C is described. This synthesis employs the conjugate addition of lithium dibenzylamide to an N-α-phenylacryloyl SuperQuat derivative followed by diastereoselective protonation of the intermediate enolate using 2-pyridone as the key step to introduce the stereochemistry. (−)-(S)-Nakinadine C was isolated in 13% yield over 9 steps from commercially available atropic acid, 98:2 dr [(Z):(E) ratio] and >99% ee.     

A highly diastereoselective synthesis of (E)-B-2-(1-cyclopropyl-1-alkenyl)-1,3,2-dioxaborinanes. Isolation and oxidation to alkyl cyclopropyl ketones

A convenient, novel synthesis of alkyl cyclopropyl ketones based on Z-1-bromo-1-alkenylboronate esters is developed. α-Bromo-(Z)-1-alkenylboronate esters readily available from literature procedures smoothly undergo a reaction with cyclopropylmagnesium bromide in tetrahydrofuran to provide the corresponding ‘ate’ complexes. These ‘ate’ complexes undergo intramolecular nucleophilic substitution reactions to provide the corresponding (E)-1-alkenylboronate esters containing cylcopropyl moiety for the first time in good isolated yields (68-82%). The carbon skeleton present in these intermediates is confirmed by oxidation with hydrogen peroxide and sodium acetate to afford the corresponding alkyl cyclopropyl ketones in good yields (72-85%).     

Domino pericyclic reactions of acyclic conjugated (E,Z,E,E)-tetraenes

Acyclic conjugated (E,Z,E,E)-tetraenes, upon thermolysis, undergo a domino pericyclic process involving 6π electrocyclisation of the (E,Z,E)-triene moiety to give the corresponding cis-disubstituted 5-vinyl-1,3-cyclohexadienes, followed by an intramolecular Diels-Alder reaction with the vinyl side chain to give tricyclo[3.2.1.0^2,7]oct-3-enes.     

Practical synthesis of (E)- and (Z)-2-silyl-3-penten-1-ols with high enantiopurity

Practical methods for the synthesis of the optically active (E)- and (Z)-2-silyl-3-pentene-1-ols are described. The optically pure (E)-allylsilane was synthesized from commercially available (R)-3-butyn-2-ol in five steps involving hydrozirconation followed by alkylation of the resulting alkenylmetal with BnOCH₂Cl. On the other hand, both enantiomers of the corresponding (Z)-allylsilane were prepared from commercially available dimethylphenylvinylsilane through epoxidation, the regioselective epoxide-opening reaction with 1-propynylmagnesium bromide, and the subsequent optical resolution using a lipase.     

Nucleophilic vinylic substitutions of (Z)-(2-aroyloxyvinyl)phenyl-λ-iodanes with tetrabutylammonium halides: vinylic SN2 reactions and ligand coupling on iodine(III)

Treatment of (Z)-(β-benzoyloxyvinyl)phenyl-λ³-iodanes, readily prepared from ethynyl(phenyl)(tetrafluoroborato)-λ³-iodane via stereoselective Michael-type addition of benzoic acids in methanol in the presence of sodium benzoates, with tetrabutylammonium halides in THF at 65 °C results in a vinylic S_N2 reaction to give the inverted (E)-β-benzoyloxyvinyl halides in high yields.     

A facile method for the stereoselective preparation of (1E,3E)-4-substituted-1-amino-1,3-dienes via 1,4-elimination

The 1,4-elimination reaction of 1-amino-4-methoxy-(2Z)-alkenes is shown to proceed with high (1E,3E)-stereoselectivities to afford the corresponding 4-substituted-1-amino-1,3-dienes in good yield. The scope and stereochemical features of the synthetic method are described.     

Stereospecific preparation of symmetrical (1Z, 3Z)- and (1E, 3E)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes from 1-bromo-1-fluoroalkenes

A straightforward method to prepare symmetrical (1Z, 3Z)- and (1E, 3E)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes is described. High E/Z ratio 1-bromo-1-fluoroalkenes, prepared by isomerization from the E/Z ≈ 1:1 isomeric mixtures, reacted with Bu₃SnSnBu₃ and Pd(PPh₃)₄ to afford (1Z, 3Z)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes in good yield. (Z)-1-Bromo-1-fluoroalkenes, which were prepared by kinetic reduction from 1-bromo-1-fluoroalkenes (E/Z ≈ 1:1), can undergo similar reaction with Bu₃SnSnBu₃ and Pd(PPh₃)₄/CuI to prepare (1E, 3E)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes.     

A facile stereoselective synthesis of difunctionalized 1,3-dienes containing tin and halogen via hydrozirconation of (Z)-3-(tributylstannyl)alk-3-en-1-ynes

Sonogashira coupling of (E)-α-iodovinylstannanes 1 with (trimethylsilyl)acetylene gave (Z)-1-(trimethylsilyl)-3-(tributylstannyl)alk-3-en-1-ynes 2, which underwent a desilylation reaction to afford (Z)-3-(tributylstannyl)alk-3-en-1-ynes 3 in high yields. (1E,3Z)-1-Halo-3-(tributylstannyl)-substituted 1,3-dienes 5 could be synthesized stereoselectively via hydrozirconation of (Z)-3-(tributylstannyl)alk-3-en-1-ynes 3, followed by trapping with iodine or NBS.     

A simple synthesis of B-2-(1-trimethylgermyl-1-alkyl)-1,3,2-dioxaborinanes. Isolation and selective oxidation to 1-trimethylgermyl-1-alkanols

(Z)-1-Trimethylgermyl-1-alkenes easily prepared by the hydroboration of the corresponding 1-trimethylgermyl-1-alkynes followed by protonolysis with acetic acid, readily react with dichloroborane-dioxane complex in dichloromethane for 6 h. The resulting solution is then treated with 1,3-propane diol in dichloromethane at 0 °C for half an hour to provide the corresponding gem-dimetalloalkanes containing boron and germanium. These α-trimethylgermylalkylboronate esters are purified by vacuum distillation in high yields (72-82%) and the structures of these novel intermediates are further confirmed by selective oxidation with alkaline hydrogen peroxide to provide the corresponding alcohols containing α-trimethylgermyl group in very good yields (74-84%).     

A highly efficient stereoselective synthesis of (Z)- and (E)-allyl iodides from Baylis-Hillman adducts

A highly efficient synthesis of (Z)- and (E)-allyl iodides has been accomplished by treatment of Baylis-Hillman adducts with iodine and triphenylphosphine in methylene chloride at room temperature. The method is associated with mild reaction conditions, high yields and excellent stereoselectivity.