探索脑化学纳米电化学监测单细胞、单囊泡、突触间隙释放化学信号分子及形貌分析

针对已有的微米及纳米电化学监测单囊泡、单突触及突触间隙释放, 扫描电化学显微镜用于单细胞释放前后形貌变化的定量分析, 微流控与阵列电极集成芯片, 用于细胞灌注培养及监测释放化学信号分子的研究工作进行了评述. 同时, 对近几年此领域的前沿研究进行了简要评论, 并对其未来发展提出了一些新的观点.     

Single-molecule chemistry and physics explored by low-temperature scanning probe microscopy

It is well known that scanning probe techniques such as scanning tunnelling microscopy (STM) and atomic force microscopy (AFM) routinely offer atomic scale information on the geometric and the electronic structure of solids. Recent developments in STM and especially in non-contact AFM have allowed imaging and spectroscopy of individual molecules on surfaces with unprecedented spatial resolution, which makes it possible to study chemistry and physics at the single molecule level. In this feature article, we first review the physical concepts underlying image contrast in STM and AFM. We then focus on the key experimental considerations and use selected examples to demonstrate the capabilities of modern day low-temperature scanning probe microscopy in providing chemical insight at the single molecule level.     

Optically transparent Au{111} substrates: flat gold nanoparticle platforms for high-resolution scanning tunneling microscopy

We demonstrate a new type of Au{111} substrate that is both atomically flat and optically transparent, which consists of solution-grown flat gold nanoparticles (FGNPs) deposited on indium tin oxide (ITO)-coated glass. We show that FGNPs are atomically flat single-crystal plates with large {111} faces that expose only 2-4 atomic layers. These FGNPs are excellent platforms for alkanethiol self-assembled monolayers (SAMs) and for high-resolution scanning tunneling microscopy (STM). Our supported FGNPs are also low-cost Au{111} substrates, employing only basic wet chemical techniques in preparation. This approach should be broadly applicable to other types of substrates for scanning probe microscopies.     

Characterizing and Manipulating Individual Molecules by Scanning Tunneling Microscopy

Scanning tunneling microscopy (STM) can provide us the special means to characterize the locally physical and chemical properties of individual molecules, and even help us to manipulate the individual molecules for constructing new molecule-scale devices. Here we have adopted two new types of STM techniques to characterize the encapsulated metal atom inside a fullerene cage, and to construct a molecule-device with strong Kondo effect, respectively. The spatially dI/dV mapping spectra were used to unveil the energy-resolved metal-cage hybrid states of individual Dy@C82 molecule, and the important information about the spatial position of Dy atom inside the cage and the Dy-cage interaction was revealed. The high-voltage pulse by STM tip is controlled to induce the dehydrogenation of Co phthalocyanine molecule and change its adsorption configuration on Au(111) surface, so as to recover Kondo effect that disappears in the case of intact adsorbed molecule.     

A gas-diffusion gold-ring-tip: Fabrication,characterization, and application in electrocatalysis

A gas-diffusion gold-ring microelectrode used as scanning electrochemical microscopy tip was fabricated. Compared to the ring-tip for droplet dispensation reported before, the as-fabricated micropipette tip has a larger ring size (ca. 25 μm diameter) that is beneficial to gas dispensation and is more sensitive to electroactive species. This micropipette electrode functioned as both a normal SECM tip and a gas dispenser was demonstrated by imaging FcMeOH⁺/FcMeOH reaction and electrocatalytic oxygen reduction reaction, respectively.     

化学力显微镜针尖修饰技术研究新进展

评述了化学力显微镜的新成果。对自组装单分子膜修饰扫描探针显微镜针尖,生物分子修饰原子力显微镜针尖,电化学方法修饰扫描隧道显微镜针尖,纳米碳管材料修饰原子力显微镜针尖等作了介绍。     

Voltammetry and in situ scanning tunnelling microscopy of de novo designed heme protein monolayers on Au(111)-electrode surfaces

In the present work, we report the electrochemical characterization and in situ scanning tunnelling microscopy (STM) studies of monolayers of an artificial de novo designed heme protein MOP-C, covalently immobilized on modified Au(111) surfaces. The protein forms closely packed monolayers, which remain electroactive upon immobilization. In situ STM images show circular structures indicating that MOP-C stands upright on the surface in accordance with the molecular design. Despite the large spatial extension of MOP-C, about 5 nm in height, conditions could be found where tip/sample interaction is minimal and proteins could be imaged without detectable tip interference. The results indicate further that the structural sensitivity of (in situ) STM depends to a significant extent on associated electron transfer kinetics. In the present case, the heme group does not contribute significantly to the tunnelling current, apparently due to slow electron transfer kinetics. As a consequence, STM images of heme-containing and heme-free MOP-C did not reveal any notable differences in apparent height or physical extension. The apparent height of heme-containing MOP-C did not show any dependence on the substrate potential being varied around the redox potential of the protein. The mere presence of an accessible molecular energy level is not sufficient to result in detectable tunnelling current modulation.     

Probing the local activity of CO2 reduction on gold gas diffusion electrodes: effect of the catalyst loading and CO2 pressure

Large scale CO₂ electrolysis can be achieved using gas diffusion electrodes (GDEs), and is an essential step towards broader implementation of carbon capture and utilization strategies. Different variables are known to affect the performance of GDEs. Especially regarding the catalyst loading, there are diverging trends reported in terms of activity and selectivity, e.g. for CO₂ reduction to CO. We have used shear–force based Au nanoelectrode positioning and scanning electrochemical microscopy (SECM) in the surface-generation tip collection mode to evaluate the activity of Au GDEs for CO₂ reduction as a function of catalyst loading and CO₂ back pressure. Using a Au nanoelectrode, we have locally measured the amount of CO produced along a catalyst loading gradient under operando conditions. We observed that an optimum local loading of catalyst is necessary to achieve high activities. However, this optimum is directly dependent on the CO₂ back pressure. Our work does not only present a tool to evaluate the activity of GDEs locally, it also allows drawing a more precise picture regarding the effect of catalyst loading and CO₂ back pressure on their performance.

Large scale CO₂ electrolysis can be achieved using gas diffusion electrodes (GDEs), and is an essential step towards broader implementation of carbon capture and utilization strategies.     

In Situ Coupling of Single Molecules Driven by Gold‐Catalyzed Electrooxidation

A single‐molecule method has been developed based on the scanning tunneling microscope (STM) to selectively couple a series of aniline derivatives and create azobenzenes. The Au‐catalyzed oxidative coupling is driven by the local electrochemical potential at the nanostructured Au STM tip. The products are detected in situ by measuring the conductance and molecular junction elongation and compared with analogous measurements of the expected azobenzene derivatives prepared ex situ. This single‐molecule approach is robust, and it can quickly and reproducibly create reactions for a variety of anilines. We further demonstrate the selective synthesis of geometric isomers and the assembly of complex molecular architectures by sequential coupling of complementary anilines, demonstrating unprecedented control over bond formation at the nanoscale.     

In situ scanning probe microscopy and new perspectives in analytical chemistry

The resolution of scanning tunnelling microscopy (STM) and other scanning probe microscopies is unprecedented but the techniques are fraught with limitations as analytical tools. These limitations and their relationship to the physical mechanisms of image contrast are first discussed. Some new options based on in situ STM, which hold prospects for molecular- and mesoscopic-scale analytical chemistry, are then reviewed. They are illustrated by metallic electro-crystallisation and -dissolution, and in situ STM spectroscopy of large redox molecules. The biophysically oriented analytical options of in situ atomic force microscopy, and analytical chemical perspectives for the new microcantilever sensor techniques are also discussed.     

Orientation‐Controlled Single‐Molecule Junctions

The conductivity of a single aromatic ring, perpendicular to its plane, is determined using a new strategy under ambient conditions and at room temperature by a combination of molecular assembly, scanning tunneling microscopy (STM) imaging, and STM break junction (STM‐BJ) techniques. The construction of such molecular junctions exploits the formation of highly ordered structures of flat‐oriented mesitylene molecules on Au(111) to enable direct tip/π contacts, a result that is not possible by conventional methods. The measured conductance of Au/π/Au junction is about 0.1 G_o , two orders of magnitude higher than the conductance of phenyl rings connected to the electrodes by standard anchoring groups. Our experiments suggest that long‐range ordered structures, which hold the aromatic ring in place and parallel to the surface, are essential to increase probability of the formation of orientation‐controlled molecular junctions.     

Platinized carbon nanoelectrodes as potentiometric and amperometric SECM probes

Micrometer-sized platinized carbon electrodes have previously been used for the detection of reactive oxygen and nitrogen species (ROS and RNS) in biological systems. Here, we report the preparation and characterization of quartz-sealed platinized carbon nanoelectrodes. Such electrodes can be employed as tips in the scanning electrochemical microscope (SECM). The prepared electrodes were characterized by steady-state voltammetry, scanning electron microscopy, and SECM. In addition to ROS/RNS detection, the high surface area of a platinized nanoelectrode makes it a useful potentiometric probe. Unlike previously fabricated platinized electrodes, carbon electrodes possess a very thin insulating sheath, which is essential for experiments inside biological cells and high-resolution SECM imaging.     

Nanoscale Chemical Imaging Using Tip‐Enhanced Raman Spectroscopy: A Critical Review

Methods for chemical analysis at the nanometer scale are crucial for understanding and characterizing nanostructures of modern materials and biological systems. Tip‐enhanced Raman spectroscopy (TERS) combines the chemical information provided by Raman spectroscopy with the signal enhancement known from surface‐enhanced Raman scattering (SERS) and the high spatial resolution of atomic force microscopy (AFM) or scanning tunneling microscopy (STM). A metallic or metallized tip is illuminated by a focused laser beam and the resulting strongly enhanced electromagnetic field at the tip apex acts as a highly confined light source for Raman spectroscopic measurements. This Review focuses on the prerequisites for the efficient coupling of light to the tip as well as the shortcomings and pitfalls that have to be considered for TERS imaging, a fascinating but still challenging way to look at the nanoworld. Finally, examples from recent publications have been selected to demonstrate the potential of this technique for chemical imaging with a spatial resolution of approximately 10 nm and sensitivity down to the single‐molecule level for applications ranging from materials sciences to life sciences.     

Sequential electrochemical oxidation and site-selective growth of nanoparticles onto AFM probes

In this work, we reported an approach for the site-selective growth of nanoparticle onto the tip apex of an atomic force microscopy (AFM) probe. The silicon AFM probe was first coated with a self-assembled monolayer (SAM) of octadecyltrichlorosilane (OTS) through a chemical vapor deposition (CVD) method. Subsequently, COOH groups were selectively generated at the tip apex of silicon AFM probes by applying an appropriate bias voltage between the tip and a flat gold electrode. The transformation of methyl to carboxylic groups at the tip apex of the AFM probe was investigated through measuring the capillary force before and after electrochemical oxidation. To prepare the nanoparticle terminated AFM probe, the oxidized AFM probe was then immersed in an aqueous solution containing positive metal ions, for example, Ag+, to bind positive metal ions to the oxidized area (COOH terminated area), followed by chemical reduction with aqueous NaBH 4 and further development (if desired) to give a metal nanoparticle-modified AFM probe. The formation of a metal nanoparticle at the tip apex of the AFM probe was confirmed by scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDXA).     

Electrochemical self-assembly of melanin films on gold

An electrochemical method for self-assembling melanin films on the Au(111) surface from melanin aggregates in alkaline media is reported. Electrochemical data combined with scanning tunneling microscopy (STM), atomic force microscopy, and Auger electron spectoscopy show that the amount and structure of the deposited melanin film depend on the potential (E) applied to the electrochemical interface and deposition time. Film formation takes place at a noticeable rate at E = -1.0 V (vs SCE). High-resolution STM images at the early stages of growth show small particles, 5-8 nm in size and 0.3-0.4 nm in height, forming ordered arrays that follow closely the Au(111) topography. The size of the melanin particles increases as the film thickness increases, reaching 150 nm for deposits grown for 16 h. The deposited films are electrochemically active, showing well-defined redox couples preceding the hydrogen evolution reaction.     

Topography Structure and Scanning Tunneling Spectrum of Nickel(Ⅱ)-tetraphenylporphyrin Molecules on Au(111)

Scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) were performed on monolayer film of NiTPP supported on Au(111) under ultrahigh vacuum (UHV) conditions. The constant current STM images show remarkable bias dependence. High resolution STM data clearly show the individual NiTPP molecules and allow easy differentiation between NiTPP and CoTPP reported before. Scanning tunneling spectra, as a function of molecule-tip separation, were acquired over a range of tip motion of 0.42 nm. Spectra do not show the variation in band splitting with tip distance. It appears for molecules such as NiTPP that the average potential at the molecule is essentially the same at the same metal substrate. For molecules of the height of NiTPP, the scanning tunneling spectra should give reliable occupied and unoccupied orbital energies over a wide range of tip-molecule distances.     

Generation/collection mode of SECMwith combined probe

Here we report a novel generation/collection operation mode of scanning electrochemical microscopy,in which a theta micropipette was employed to support two adjacent water/1,2-dichloroethane interfaces separated by the thin central glass wall:one acts as the generator while the other as the collector.The generation current,collection current and collection efficiency were enhanced significantly when the tip approached to an insulate substrate.     

铜在HOPG上电沉积过程的现场ECSTM研究

用自制的电化学扫描隧道显微镜（ＥＣＳＴＭ）现场研究Ｃｕ在ＨＯＰＧ上的电沉积过程．结果表明Ｃｕ在ＨＯＰＧ上的电沉积为三维成核的过程．当电位较低或Ｃｕ２＋离子浓度较低时，铜在本体金属生长主要沿着台阶方向．过电位较高时，铜的成核数目增加，沉积层的晶粒有所细化．同时，非现场ＥＣＳＴＭ比较研究表明，ＳＴＭ针尖对针尖局部区域的电沉积起屏蔽作用，针尖所在区域Ｃｕ的沉积速度比其它区域明显减小     

Formation of supramolecular nanobelt arrays consisting of cobalt(II) "picket-fence" porphyrin on Au surfaces

Adlayers of cobalt(II) 5,10,15,20-tetrakis(alpha,alpha,alpha,alpha-2-pivalamidophenyl)porphyrin (CoTpivPP) were prepared by immersing either Au(111) or Au(100) substrate in a benzene solution containing CoTpivPP molecules, and they were investigated in 0.1 M HClO4 and 0.1 M H2SO4 by cyclic voltammetry and in situ scanning tunneling microscopy (STM). The adlayer structure and electrochemical properties of CoTpivPP are compared to those of 5,10,15,20-tetraphenyl-21H,23H-porphine cobalt(II) (CoTPP). Characteristic nanobelt arrays consisting of CoTpivPP molecules were produced on both Au(111) and Au(100) surfaces. The stability of the nanobelt arrays was controlled by manipulating the electrode potential. On the other hand, the formation of nanobelt arrays consisting of O2-adducted CoTpivPP molecules depended upon the crystallographic orientation of Au. The state of O2 trapped in the cavity of CoTpivPP was distinctly observed in STM images as a bright spot in the nanobelt array formed on reconstructed Au(100)-(hex) surface, but not on Au(111) surface. This result suggests that the arrangement of underlying Au atoms plays an important role in the formation of nanobelt arrays with the sixth ligand coordination.     

Solid Contact Micropipette Ion Selective Electrode for Potentiometric SECM

New solid contact ammonium micropipette electrodes (ISE), well applicable in scanning electrochemical microscopy are reported. The solid contact was made of a PEDOT nanowire coated carbon fiber, lowered down close to the orifice, and dipped inside the cocktail being in the pipette tip. This configuration provided low electrical resistance and good potential stability. Submicron tip size, usual in case of micropipette ISE‐s easily can be fabricated in this way. The applicability of the electrode in SECM has been proved in SG/TC mode imaging urease enzyme active spots in urea solutions.