Spectroscopic and spectrometric studies of anion recognition with calix[4]pyrroles in different reaction conditions

The binding studies of calix[4]pyrroles (1–6) with fluoro, chloro, bromo, iodo and sulphato anions generated from normal-tetrabutylammoniumfluoride, normal-tetrabutylammoniumchloride, normal-tetrabutylammoniumbromide, normal-tetrabutylammoniumiodide, and normal-tetrabutylammoniumsulphate respectively were investigated by electrospray ionization mass spectrometry (ESI-MS) in dichloromethane–acetonitrile in negative ion mode. The efficacy of a particular calix[4]pyrrole to bind with anions was found maximum at low cone voltage of the instrument, at high cone voltage the binding was suppressed due to removal of anion from the cavity of the macrocycles. The binding strength was found inversely proportional to the size of anion for a particular calix[4]pyrrole. The fragmentation pattern of calix[4]pyrrole was observed at higher cone voltage of ESI-MS and was interpreted. The association constants of calix[4]pyrroles and anions obtained from electronic transition studies were in good agreement with that observed from ¹H NMR titration studies.     

Theoretical study of anion binding to calix[4]pyrrole: the effects of solvent,fluorine substitution,cosolute, and water traces

The binding of different anions to calix[4]pyrrole has been studied by means of molecular dynamics coupled to thermodynamic integration calculations. The effect of different apolar solvents, octafluoro substitution, and the change in binding free energy derived from the presence of cosolute and water traces (the hydrated salt used to introduce the anion in the solution) were examined. Calculations allow us to rationalize the differential binding of ions to calix[4]pyrrole and octafluorocalix[4]pyrrole as well as to predict the behavior in new solvents for which experimental data are not available yet. It is found that both calix[4]pyrrole and octafluorocalix[4]pyrrole have a dramatic preference for F- in the gas phase and pure aprotic solvents, but the situation can change dramatically in protic solvents or in the presence of the hydrated cation which is used as cosolute of the anion. Overall, our results provide interesting clues for a better understanding of the process detected experimentally as "binding".     

Anion binding behavior of heterocycle-strapped calix[4]pyrroles

A comparative study of the halide and benzoate anion binding properties of a series of phenyl, pyrrole, and furan-strapped calix[4]pyrroles has been carried out. These receptors, which have previously been shown to bind the chloride anion (Yoon et al., Angew. Chem., Int. Ed. 47(27):5038–5042, 2008), were found to bind bromide and benzoate anion (studied as the corresponding tetrabutylammonium salts) with near equal affinity in acetonitrile, albeit less well than chloride, as determined from ITC measurements or NMR spectroscopic titrations. This stands in marked contrast to the parent octamethylcalix[4]pyrrole, where the carboxylate anion affinities are substantially higher than those for bromide anion under identical conditions. This finding is rationalized in terms of tighter binding cavity present in the strapped systems. For all three anions for which quantitative data could be obtained (i.e., Cl^?, Br^?, PhCO₂ ^?), the pyrrole-strapped system displayed the highest affinity, although the relative enhancement was found to depend on the anion in question. In the specific case of fluoride anion binding to the pyrrole-strapped receptor, two modes of interaction are inferred, with the first consisting of binding to the calix[4]pyrrole via NH-anion hydrogen bonds, followed by a process that involves deprotonation of the strapped pyrrolic NH proton. A single crystal X-ray diffraction analysis provides support for the first of these modes and further reveals the presence of a methanol molecule bound to the fluoride anion.     

Tuning the anion binding properties of calixpyrroles by means of p-nitrophenyl substituents at their meso-positions

Extended cavity calix[4]pyrroles and a calix[6]pyrrole were synthesized by cyclization of 5-methyl-5-(4-nitrophenyl)dipyrromethane with acetone in the presence of acid. The solid-state structures of the novel macrocycles were determined by X-ray crystallography. The host-guest chemistry of these receptors towards halide ions was investigated in solution by ¹H NMR titration techniques and compared with those of the meso-octamethylcalix[4]pyrrole and meso-dodecamethylcalix[6]pyrrole. The binding of chloride anions was observed to occur with different affinities on the two faces of the novel calix[6]pyrrole derivative described here.     

Calix[6]pyrrole and hybrid calix[n]furan[m]pyrroles (n+m=6): syntheses and host-guest chemistry

Calix[6]pyrrole 2 and the "hybrid systems" calix[3]furan[3]pyrrole 12, calix[2]furan[4]pyrrole 13, and calix[1]furan[5]pyrrole 14, have been synthesized by increasing conversion of the furan units present in the readily accessible calix[6]furan 3 to pyrroles. The host-guest chemistry of these novel macrocycles towards a number of anions, including halogen ions, dihydrogen phosphate, hydrogen sulfate, nitrate, and cyanide has been investigated in solution by (1)H NMR titration techniques and/or phase transfer experiments. The solid-state structures of the free receptors 2, 12, and 13, the 1:1 complexes of calix[6]pyrrole 2 with chloride and bromide, and the 1:1 complex of 14 with chloride are also reported.     

Tetrathiafulvalene-calix[4]pyrroles: synthesis, anion binding, and electrochemical properties

The syntheses of monotetrathiafulvalene-calix[4]pyrrole 5 and bistetrathiafulvalene-calix[4]pyrrole 6, prepared from the acid-catalyzed condensation of monopyrrolo[3,4-d]tetrathiafulvalene (MPTTF, 7) with acetone in the presence of tripyrrane 8 and dipyrromethane 9, respectively, are described. Compound 5 and the previously reported tetrathiafulvalene-calix[4]pyrrole 4 both adopt a 1,3-alternative conformation in the solid state, as determined from X-ray crystallographic analysis. The anion binding properties of the tetrathiafulvalene-calix[4]pyrroles 5 and 6, as well as those of the parent meso-octamethylcalix[4]pyrrole (1), were investigated in acetone using (1)H NMR spectroscopic and isothermal titration calorimetry (ITC) techniques and, within the error limits of the methods, were generally found to give concordant results. On the basis of the results of the ITC studies carried out in 1,2-dichloroethane, increasing the number of tetrathiafulvalene units annulated to the calix[4]pyrrole system serves to enhance the anion binding affinities substantially but at the price of lowered selectivity. Cyclic voltammetry (CV) studies, carried out in 1,2-dichloroethane, provided evidence of an anion-dependent electrochemical response with Cl(-) and Br(-) ions. This response was particularly dramatic in the case of the monotetrathiafulvalene-calix[4]pyrrole 5, with a DeltaE(max) of -145 mV being seen after the addition of approximately 1 equiv of Cl(-) ion.     

Calix[n]bispyrrolylbenzenes: synthesis, characterization, and preliminary anion binding studies

A series of novel calixpyrrole-like macrocycles, calix[n]bis(pyrrol-2-yl)benzene (calix[n]BPBs, n=2-4) 9 a-11 a, have been synthesized by means of the TFA-catalyzed condensation reaction of bis(pyrrol-2-yl)benzene 8 a with acetone. Calix[2]BPB 9 a represents an expanded version of calix[4]pyrrole in which two of the four meso bridges are replaced by benzene rings. By contrast, systems 10 a and 11 a, which bear great considerable to calixbipyrroles 2 and 3, represent higher homologues of the basic calix[n]BPB motif. Solution-phase anion binding studies, carried out by means of (1)H NMR spectroscopic titrations in [D2]dichloromethane and isothermal titration calorimetry (ITC) in 1,2-dichloroethane, reveal that 9 a binds typical small anions with substantially higher affinities than 1, even though the same number of hydrogen bonding donor groups are found in both compounds. The basic building block for 9 a, benzene dipyrrole 8 a, also displays a higher affinity for anions than the building block for 1, dimethyldipyrromethane 16. Structural studies, carried out by single-crystal X-ray diffraction analyses, are consistent with the solution-phase results and reveal that 9 a is able to stabilize complexes with chloride and nitrate in the solid state. Structures of the PF6- and NO3- complexes of 10 a were also solved as were those of the acetone adduct of 9 a and the ethyl acetate adduct of 11 a.     

N-confused calix[4]pyrroles

This is a first review devoted to N-confused calix[4]pyrroles (NCCPs). NCCPs are a relatively recent arrival to the family of the pyrrole-based anion binding macrocycles, being for the first time identified in 1999. Yet, in a relatively short time these calix[4]pyrrole (CP) isomers attracted attention of the community of research groups interested in anion binding and sensing. This is because they are relatively easy to synthesize, but mainly because they posses anion-binding properties that are different from that of regular calix[4]pyrroles. The difference in anion-binding properties stems from a different binding mode between the NCCP and anion. While the regular CPs adopt in the complex an ideal cone-like conformation where all four pyrroles-NHs engage in hydrogen bonding to the anion, the inverted pyrroles do not allow forming the cone. NCCPs bind anions via a confused cone (CC), by three NH hydrogen bonds with an anion and a CH–anion contact. This different binding mode results also in different anion-binding affinity and selectivity compared to regular CPs. Also, the inverted pyrroles offer a unique possibility for selective chemical modification of the receptor. The corresponding colorimetric sensors were tested for anion binding applications. The results of colorimetric assays for anions are presented and potential applications discussed.     

Cooperative binding of calix[4]pyrrole-anion complexes and alkylammonium cations in halogenated solvents

Calix[4]pyrrole-chloride interactions are affected not only by the choice of countercation in halogenated solvents, but show a specific dependence on the way in which these cations are bound within the electron rich, bowl-like calix[4]pyrrole cavity formed upon chloride anion complexation. In dichloromethane, the affinities of simple meso-octamethylcalix[4]pyrrole (1) for methyl-, ethyl-, and n-butylammonium chlorides are on the order of 10(5), 10(4), and 10(2) M(-1), respectively, as determined from isothermal titration calorimetry (ITC) analyses. These cation-dependent anion affinity effects, while clearly evident, are less pronounced in other halogenated solvents, such as 1,2-dichloroethane. Support for the proposed cation complexation selectivity is provided by solid state X-ray crystallographic analyses.     

N-Tosylpyrrolidine calix[4]pyrrole: synthesis and ion binding studies

The synthesis and preliminary solution phase ion binding properties of the N-tosylpyrrolidine calix[4]pyrrole 2 are reported. This β-octaalkyl-substituted calix[4]pyrrole, the first to be prepared via a direct condensation reaction, was obtained by reacting the 3,4-alkyl-functionalized pyrrole 8 with acetone in the presence of an acid catalyst. On the basis of (1)H NMR spectroscopic analyses and isothermal titration calorimetry, it was concluded that, compared with the parent, β-unsubstituted calix[4]pyrrole (1), compound 2 possesses significantly enhanced binding ability for halide anions in chloroform. Furthermore, 2 proved capable of solubilizing in chloroform solution the otherwise insoluble salts, CsF and CsCl. These effects are ascribed to the interactions between the four tosyl groups present in 2 and the counter cations of the halide anion salts.     

Mono Halogen Substituted Calix[4]pyrroles: Fine-tuning the Anion Binding Properties of Calix[4]pyrrole

Abstract

Single halogen atom (i. e. I, Br, Cl and F) substituted calix[4]pyrroles, compounds 2, 3, 4 and 5, were synthesized. Studies of these systems reveal that replacement of a single β-pyrrolic hydrogen atom can increase the anion binding ability of calix[4]pyrroles for a variety of anions (e. g. Cl^?, Br^?, H₂PO₄ ^? and HSO^? ₄) relative to normal non-halogen substituted calix[4]pyrrole 1. In the case of chloride anion, the expected relative affinity sequence of 5 > 4 > 3 > 2 was observed. This was not found to be true for Br^?, H²PO^? ₄, and HSO^? ₄. Here, the chlorine substituted calix[4]pyrrole 4 was found to display a slightly higher affinity in the case of each anion than the fluorine-bearing derivative 5. This was rationalized in terms of intermolecular NH … F hydrogen bonding interactions being present in CD₂Cl₂ solutions of 5. Support for this latter conclusion came from concentration and temperature-dependent NMR spectroscopic studies.

A matched set of mono halogen substituted calix[4]pyrroles was used to study in detail, the extent to which halogen substituents may be used to fine-tune the anion binding properties of calix[4]pyrroles.     

Sulfur-containing hetero-calix[4]pyrroles as mercury(II) cation-selective receptors: thermodynamic aspects

Two sulfur-containing hybrid calix[4]pyrrole derivatives (III and IV) have been synthesized and fully characterized. Several analytical techniques (1H NMR, conductance measurements, UV-vis spectrophotometry, titration potentiometry, and titration calorimetry) have been used to assess the interaction between these hybrid calixpyrrole receptors and metal cations in acetonitrile and dimethylsulfoxide. The partition constants of calix[4]pyrrole, I, II, and IV in the acetonitrile-hexane solvent system and the solubilities of the ligands in various solvents at 298.15 K were determined. 1H NMR measurements reveal the sites of interaction of calixpyrrole ligands with metal cations in CD3CN. Conductance and UV-vis spectrophotometric measurements were performed to establish the composition of mercury(II) calixpyrrole complexes in acetonitrile at 298.15 K. Titration calorimetry was used to quantitatively assess Hg(II)-calixpyrrole interactions. Thus the thermodynamics of complexation of calixpyrrole ligands with the mercury(II) cation in acetonitrile at 298.15 K are reported. Potentiometric titrations were also used to establish the stepwise stability constants for the complexation of calix[3]thieno[1]pyrrole with the Hg(II) cation in acetonitrile at 298.15 K. The results show that replacement of one or more pyrrole units by thiophene rings in calix[4]pyrrole has tuned significantly the discrimination ability of these ligands between anions and enables the produced hybrid calixpyrroles to bind selectively with Hg(II) in acetonitrile. No interaction was observed between these ligands and other metal cations in acetonitrile.     

Cis- and trans-strapped calix[4]pyrroles bearing phthalamide linkers: synthesis and anion-binding properties

[reaction: see text] New cis-strapped calix[4]pyrrole derivatives 12, 13, and 19 and trans-strapped systems 14 and 15 bearing isophthalate-derived diamide spacers linked to the tetrapyrrolic core have been synthesized and characterized by spectroscopic means. The anion-binding behavior of these receptors was investigated by proton NMR spectroscopy and isothermal titration calorimetry (ITC). A 2:1 binding stoichiometry was observed under the conditions of NMR analysis but not at the lower concentration regime used for ITC. As gauged from both sets of analyses, these new strapped systems display affinities for halide anions that are enhanced compared to those of normal, unstrapped calix[4]pyrrole. However, contrary to expectations, no size-dependent selectivity for anions is observed as the length of the bridging strap is varied. Such results are interpreted in terms of anion-binding processes that occur outside the central pocket defined by the strap but that still favor strong associations as the result of the increased number of hydrogen-bonding donors the amide groups provide.     

Oligoether-strapped calix[4]pyrrole: an ion-pair receptor displaying cation-dependent chloride anion transport

A ditopic ion-pair receptor (1), which has tunable cation- and anion-binding sites, has been synthesized and characterized. Spectroscopic analyses provide support for the conclusion that receptor 1 binds fluoride and chloride anions strongly and forms stable 1:1 complexes ([1·F](-) and [1·Cl](-)) with appropriately chosen salts of these anions in acetonitrile. When the anion complexes of 1 were treated with alkali metal ions (Li(+), Na(+), K(+), Cs(+), as their perchlorate salts), ion-dependent interactions were observed that were found to depend on both the choice of added cation and the initially complexed anion. In the case of [1·F](-), no appreciable interaction with the K(+) ion was seen. On the other hand, when this complex was treated with Li(+) or Na(+) ions, decomplexation of the bound fluoride anion was observed. In contrast to what was seen with Li(+), Na(+), K(+), treating [1·F](-) with Cs(+) ions gave rise to a stable, host-separated ion-pair complex, [F·1·Cs], which contains the Cs(+) ion bound in the cup-like portion of the calix[4]pyrrole. Different complexation behavior was seen in the case of the chloride complex, [1·Cl](-). Here, no appreciable interaction was observed with Na(+) or K(+). In contrast, treating with Li(+) produces a tight ion-pair complex, [1·Li·Cl], in which the cation is bound to the crown moiety. In analogy to what was seen for [1·F](-), treatment of [1·Cl](-) with Cs(+) ions gives rise to a host-separated ion-pair complex, [Cl·1·Cs], in which the cation is bound to the cup of the calix[4]pyrrole. As inferred from liposomal model membrane transport studies, system 1 can act as an effective carrier for several chloride anion salts of Group 1 cations, operating through both symport (chloride+cation co-transport) and antiport (nitrate-for-chloride exchange) mechanisms. This transport behavior stands in contrast to what is seen for simple octamethylcalix[4]pyrrole, which acts as an effective carrier for cesium chloride but does not operates through a nitrate-for-chloride anion exchange mechanism.     

Single side strapping: a new approach to fine tuning the anion recognition properties of calix[4]pyrroles

Three calix[4]pyrroles bearing m-orcinol-derived diether straps of different lengths on one side of the tetrapyrrolic core have been synthesized and characterized. Structural information for an analogous diester bridged strapped system reported previously (Yoon, D. W.; Hwang, H.; Lee, C. H. Angew. Chem., Int. Ed. Engl. 2002, 41, 1757-1759) is also provided as are bromide and chloride anion affinities for all four systems determined by Isothermal Titration Calorimetry (ITC) in acetonitrile. Although both sets of the strapped calix[4]pyrroles displayed enhanced affinities for chloride and bromide anion, differences were seen among the various receptors that support the conclusion that the anion binding ability of calixpyrrole-type systems can be effectively tuned by modifying the length and nature of the bridging straps. In the specific case of the diether systems, the largest chloride affinity was seen with the shortest strap, whereas the largest affinity for bromide anion was recorded in the case of the longest strap. On the basis of these findings, as well as supporting (1)H NMR spectroscopic studies, it is postulated that not only cavity size per se, but also the ability of the aryl portion of the strap to serve as a CH hydrogen bond donor site are important in regulating the observed anion affinities.     

Modified calix[4]pyrrole receptor: solution thermodynamics of anion complexation and a preliminary account on the phosphate extraction ability of its oligomer

A modified calix[4]pyrrole, namely meso-tetramethyl-tetrakis-(4-hydroxyphenyl) calix[4]pyrrole, 1, has been synthesized and characterized. (1)H NMR investigations in various deuterated solvents seems to indicate that this receptor interacts with acetone-d(6). The solution thermodynamics of 1 in various solvents is reported. Complexation studies in CD(3)CN show that the NH and OH functionalities of 1 are the active sites of its interaction with the fluoride and the dihydrogen phosphate anions. The composition of the anion complexes was established through conductance measurements. In all cases, 1:1 complexes are formed. The thermodynamics of anion complexation in acetonitrile and N,N-dimethylformamide is discussed comparatively with previous reported data for the parent calix[4]pyrrole, 2, and these anions in these solvents. The medium effect on anion complexation is discussed in terms of the solvation properties of the reactants and the product in acetonitrile and N,N-dimethylformamide. An oligomeric material containing 1 as anchor group was synthesized and characterized by mass spectrometry. Preliminary studies have been performed to assess the extracting properties of this oligomer for the removal of phosphates from aqueous solutions. The effects of pH, temperature on the extraction of this anion salt from water, as well as the kinetics of the process (fast) were investigated.     

β-卤素取代对杯[4]吡咯构象及主-客体相互作用的影响(Ⅰ)——分子力学/分子动力学研究

通过分子力学/分子动力学模拟,获得4种游离杯[4]吡咯以及杯[4]吡咯-卤素阴离子主-客体复合物的稳定构象,用偶极子模型解释了β位卤素取代对游离杯[4]吡咯稳定构象、杯[4]吡咯-卤素阴离子复合物的结构及其结合能的影响,指出造成这些影响的主要因素是不同卤素取代导致杯[4]吡咯的吡咯环基团偶极大小不同.计算了不同杯[4]吡咯与卤素阴离子的结合能,当杯[4]吡咯β位上的H原子被卤素阴离子取代后,杯[4]吡咯对阴离子的识别能力加强.     

Analytical applications of nano-baskets of calix[4]pyrroles

Calix[4]pyrrole is one such class which holds a great promise in the fields of sensors and their unique behavior as sensors owes to its structural flexibility. Anion binding ability of calix[4]pyrrole has been modified in a variety of ways. Introduction of electron releasing and electron withdrawing groups at the meso position or at β-pyrrolic positions leads to calix[4]pyrrole with deep cavities and fixed walls which shows increased selectivity and modified binding effects. Strapping of calix[4]pyrrole is another way to modify its structural behavior which is responsible for its binding behavior. Choice of strap could play a profound role not only in increasing the intrinsic anion binding affinity of calix[4] pyrrole, but also in modulating the receptor anion stoichiometry, thereby modifying potentially the inherent anion binding selectivity. Calix[n]pyrroles with extended cavities have also been synthesized. Such as calix[3]bipyrrole binds bromide substantially with high affinity than calix[4]pyrrole. Calix[4]pyrrole has also been used to produce anion sensors that can report the presence of anion by means of a color change. The medium effect on the complexation of calix[4]pyrrole and anion has been investigated in various solvents. Calix[4]pyrrole has also been used to increase the ionic conductivity of solid polymer electrolyte by anion complexation of the metal salt. Calix[4]pyrrole has been used to obtain optical sensors using surface plasmon resonance technique. Composite films of cellulose acetate containing calix[4]pyrrole has also been reported which has potential usage in packaging, storage and preservation. In nut shell, calix[4]pyrrole can be modified in a variety of ways to form versatile sensors which can be used in variety of ways in various areas.     

Spectroscopic study on anion recognition properties of calix[4]pyrroles: effects of tetraalkylammonium cations

The solution binding properties of calix[4]pyrroles with anion (added as tetraalkylammonium salts) were investigated using UV-vis spectroscopic techniques. The obvious red-shift of absorption maximum band of calix[4]pyrrole in EtOH in the presence of the tetramethylammonium (TMA(+)) or tetraethylammonium (TEA(+)) salts were observed. These results displayed in electronic absorption spectra indicated calix[4]pyrrole receptors linking anionic species through multiple hydrogen bonding interactions are capable of using the periphery electron-rich "walls" for selectively binding electron-deficient tetraalkylammonium cation subunits by cation-pi charge-transfer interaction. It was seen that the stability of the calix[4]pyrrole-anion complex depends strongly on the cation. The meso-alkyl groups of the calix[4]pyrrole, the affinity for the anion subunits and the structure of tetraalkylammonium cations have considerable effects on the formation of cation-pi charge-transfer interaction.     

New insights on anion recognition by isomers of a calix pyrrole derivative

Two isomeric structures of meso-tetramethyltetrakis(3-hydroxyphenyl)calix[4]pyrrole, 4-alphaalpha betabeta and 4-alphabeta alphabeta, have been isolated and characterized by 1H NMR in different solvents (CD3CN, CD3OD, and DMSO-d6) at 298 K. Standard Gibbs energies of solution derived from solubility data in various solvents were used to calculate the transfer Gibbs energy, delta(t)G(o), of these ligands using acetonitrile as the reference solvent. These results are consistent with the 1H NMR studies in different media that show chemical shift changes observed in the resonances of the NH and the OH protons of these ligands. Solvate formation was observed when these isomers were exposed to saturated atmosphere of N,N-dimethylformamide, dimethyl sulfoxide and propylene carbonate. Anion interaction involving 4-alphaalpha betabeta and 4-alphabeta alphabeta was investigated by 1H NMR in CD3CN while the complex composition was assessed through conductance measurements. Significant differences are observed in the affinity of these ligands for anions as well as in the composition of the fluoride complexes. Thus 4-alphaalpha betabeta shows selectivity for H2PO4(-) in acetonitrile while its isomer 4-alphabeta alphabeta is selective for the fluoride anion. Again the complex composition is altered for the fluoride anion when complexed with 4-alphaalpha betabeta in acetonitrile (1:1 complex) relative to 4-alphabeta alphabeta in the same solvent. The latter isomer shows an enhanced hosting ability for this anion. Thus two anions are taken up per unit of ligand. The thermodynamics of complexation of H2PO4(-) and these ligands in acetonitrile is discussed, and the results are compared with those involving calix[4]pyrrole and this anion in this solvent. It is shown that the isomers interact with two H2PO4(-) anions while one calix[4]pyrrole unit interacts with this anion. This paper demonstrates for the first time that the enthalpy parameter may be a suitable reporter of the number of hydrogen bonds formed when calix[4]pyrrole and its derivatives interact with the dihydrogen phosphate anion in acetonitrile. In moving from acetonitrile to N,N-dimethylformamide, 4-alphaalpha betabeta is unable to enter complexation with most anions, except fluoride, with which the formation of a 1:2 (ligand:anion) complex is demonstrated. The rather versatile behavior of these receptors for anions is explained on the basis of 1H NMR evidence and solvation effects. These investigations highlight the importance of the medium effect on the stability of the complex and reflect the inherent nature of the solvent and its highly significant involvement in the complexation process.