The structure of mixed fluorides Ca1?xSrxF2 and Sr1?xBaxF2 and the luminescence of Eu2+ in these crystals

The structure of the mixed fluorites Ca_1−x Sr_xF₂ and Sr_1−x Ba_xF₂, as well as the structure of the Eu²⁺ impurity center in these crystals, is calculated within the framework of the virtual-crystal method realized in the shell model and pair-potential approximation. The phenomenological dependence of the position of the lower level of the 4f ⁶5d configuration of the Eu²⁺ ion on distance to the Eu²⁺-ligand is derived. The dependences of the Stokes shift and the Huang-Rhys factor on x are calculated for the yellow luminescence in Sr_1−x Ba_xF₂:Eu²⁺. The value of x at which the lower level of the 4f ⁶5d configuration of the Eu²⁺ ion in Sr_1−x Ba_xF₂:Eu²⁺ falls within the conduction band is found. __________ Translated from Fizika Tverdogo Tela, Vol. 45, No. 5, 2003, pp. 823–826. Original Russian Text Copyright ? 2003 by Nikiforov, Zakharov, Chernyshev, Ugryumov, Kotomanov.     

Structure and dynamics of the pure and mixed fluorites <Emphasis Type="Italic">Me</Emphasis>F<Subscript>2</Subscript> (<Emphasis Type="Italic">Me</Emphasis> = Ca,Sr, Ba,and Pb)

The structure and dynamics of the crystal lattice of MeF₂ fluorites (Me = Ca, Sr, Ba, and Pb) under external hydrostatic compression (0–3.5 GPa) are calculated within the shell model in the pair potential approximation. The first-order structural phase transition from the cubic to the orthorhombic phase in these crystals under pressure is investigated. The effect of chemical pressure on the BaF₂ crystal is analyzed by the simulation of mixed crystals, namely, Ba_1?xCa_xF₂ and Ba_1?xSr_xF₂. It is demonstrated that the supercell method, as applied to the simulation of mixed crystals, results in a lower lattice energy per formula unit as compared to the lattice energy obtained by the virtual-crystal method.     

Luminescent properties of Sr2.5−3x/2Ba0.5SmxAlO4F oxyfluorides

Effective orange Sm³⁺-doped Sr_2.5Ba_0.5AlO₄F phosphors excited at 254 and 408 nm excitation were prepared by the solid-state method. The excitation and emission spectra of Sr_2.5?3x/2Ba_0.5Sm_xAlO₄F and Sr_2.5?3x/2Ba_0.5Sm_xAlO_4?αF_1?δ (x=0.001～0.1) based on photoluminescence spectroscopy are investigated. The defects in anion-deficient Sr_2.5?3x/2Ba_0.5Sm_xAlO_4?αF_1?δ (x=0.001, 0.01) are monitored by broad-band photoluminescence emission centered near 480 nm along with the orange emission transitions of Sm³⁺. CIE values and relative luminescent intensities of Sr_2.5?3x/2Ba_0.5Sm_xAlO₄F and Sr_2.5?3x/2Ba_0.5Sm_xAlO_4?αF_1?δ by changing the Sm³⁺ content (x=0.001～0.1) are discussed.     

New aspects on the dielectric properties of the alkali halides with divalent impurities

Dielectric losses were measured in the following crystals NaCl+ (Mg²⁺, Co²⁺, Ni²⁺, Sr²⁺, Ca²⁺, Mn²⁺, Zn²⁺, Cd²⁺, Ba²⁺, Pb²⁺), KCl + (Ca²⁺, Sr²⁺, Ba²⁺, ²⁺, Pb²⁺) and KBr + (Sr²⁺, Ba²⁺) in the frequency region 5–500 kHz. It was found that when the divalent cation impurity has an electronic configuration similar to the inert gases (1) no observable deviation from simple Debye theory exists (2) the activation energy Φ increases linearly with the ionic radius of the impurity.The above observations (1) and (2) do not hold when the divalent cation impurity has d-electrons in the outer subshell.     

Effect of hydrostatic and chemical pressure on BaF2 and BaF2: Eu2+ crystals

The effect of hydrostatic pressure on a BaF₂ crystal was studied within the shell model in the pair-wise potential approximation. The structural phase transition from the cubic to orthorhombic phase was simulated. The behavior of the unit-cell parameters of the α-and β-BaF₂ phases under hydrostatic pressure (from 0 to 12 GPa) was investigated. The fundamental vibration frequencies of BaF₂ under hydrostatic pressure (0–3.5 GPa) were calculated for both phases. The effect of chemical pressure on the BaF₂ crystal was studied by simulating Ba_1?x Me_xF₂ mixed crystals (Me=Ca, Sr). It was shown that at impurity concentrations up to 15–20 at. % the lattice constant varies in the same way as it does when hydrostatic pressure increases to P _c , which corresponds to a phase transition to the orthorhombic phase. The effect of chemical and hydrostatic pressure on BaF₂: Eu²⁺ doped crystals was also studied. The dependence of the absorption and luminescence zero-phonon line shift on the Eu²⁺-ligand distance was calculated.     

Dielectric properties Ca-substituted barium strontium titanate ferroelectric ceramics

The dielectric and ferroelectric properties of Ba_1−xSr_xTiO₃ (BST) (x=0.10,0.20,0.30,0.40 and 0.60) ceramics and Ba_1−2xSr_xCa_xTiO₃ (BSCT) (x=0.10,0.20,0.30) ceramics have been investigated. The low temperature phase transitions of BST ceramics vanish after Ca²⁺ substitution while the high temperature transition is diffused and relaxed, which becomes more obvious with increasing x. Ca²⁺ substitution obviously decreases the dielectric constant maximum, K_m, of BST ceramics and changes the temperature of dielectric constant maximum, T_m, of BST ceramics. The shift of T_m in BST is attributed mainly to the Sr²⁺ and Ba²⁺ concentration. BST ceramics exhibit almost normal ferroelectric characteristics, while a typical relaxor behavior was observed in BSCT ceramics. The relaxor behavior observations may be understood by a random electric field induced domain state.     

Theory of the giant magnetoresistance in La<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>A<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>MnO<Subscript>3</Subscript>

To clarify the origin of the giant magnetoresistance (GMR) observed in La_1?x A _x MnO₃ (A²⁺=Sr²⁺, Pb²⁺, Ba²⁺ and Ca²⁺), we have investigated theoretically the electrical resistivity ρ of carriers in the background of Mn spins which interact with each other through the double exchange interaction. It has been found that extraordinarily large pin fluctuations caused by the instability of the ferromagnetic state are responsible for the transport anomalies including the GMR.     

Phase stratification in the Nd1 − x BaxCoO3 − δ (0.3 ≤ x ≤ 0.54) system

Slowly cooled Nd_{1 ? x} Ba_xCoO_{3 ? δ} samples were two-phase in the concentration interval 0.3 ≤ x ≤ 0.46. One of the phases had O-orthorhombic lattice distortions (Pbnm) characteristic of ferromagnetic samples with x ≤ 0.3, and the other phase had tetragonal distortions (P4/mmm) characteristic of samples with x ≥ 0.46. Tetragonal distortions were caused by ordering of Nd³⁺ and Ba²⁺ ions. Samples with ordered neodymium and barium ions (Nd_{1 ? y} Ba_{1 + y} Co₂O_{6 ? γ} at ?0.08 ≤ y ≤ 0.08) experienced metal-dielectric and orientation magnetic phase transitions.     

Search for the stannous ion in a chloride/fluoride matrix: cases of Ba1−x Sn x Cl1+y F1−y and of Ba2SnCl6

With the exception of anhydrous SnCl₂, in divalent tin fluorides and chlorides, tin(II) is always covalent bonded, i.e. its valence orbitals are hybridized and the tin lone pair is located in one of the hybrid orbitals. This lone pair is highly stereoactive and generates a large efg, resulting in a large quadrupole splitting. A doubly disordered Ba_1?x Sn _x Cl_1+y F_1?y solid solution has been prepared and found to contain either ionic tin(II) (Sn²⁺ ions) or a mixture of ionic and covalent tin(II), depending on x, y and the method of preparation. The ionic tin(II) spectrum in Ba_1?x Sn _x Cl_1+y F_1?y gives a Mössbauer single line that is broadened by the lattice efg, like in SnCl₂. Now, Sn²⁺ has been found to be present in an undistorted octahedral coordination in a newly isolated compound, Ba₂SnCl₆. It should be the first example of Sn²⁺ that is fully ionic and has a perfectly spherical lone pair.     

Preparation of Sm3+–Eu3+ coactivating red-emitting phosphors and improvement of their luminescent properties by charge compensation

By charge compensating, a series of red-emitting phosphors Ca_0.54Sr_0.16Ca_0.54Sr_0.31Eu_0.08Sm_0.02(MoO₄)_0.6(WO₄)_0.4 were synthesized. Two approaches to charge compensation were used: (a) 2Ca²⁺/Sr²⁺→Eu ³⁺/Sm³⁺+M ⁺, where M⁺ is a monovalent cation like Li⁺, Na⁺ or K⁺; (b) Ca²⁺/Sr²⁺→Eu ³⁺/Sm³⁺+N ^?, where N⁺ is a monovalent anion like F^?, Cl^?, Br^?, or I^?. One red LED was made by combining the phosphor and 390–405 nm emitting LED chip under 20 mA forward-bias current, the color purity, chromaticity coordinates and the luminous intensity of which were 99.5%, x=0.66, y=0.33, 5600 mcd, respectively.     

The effect of alkaline earth metallic ions on the photoluminescence properties of sol-gel silica glass

Mg²⁺-, Ca²⁺-, Sr²⁺- and Ba²⁺-doped silica glasses have been prepared using sol-gel processing by employing Si(OC₂H₅)₄, MgCl₂6H₂O, CaCl₂2H₂O, SrCl₂6H₂O and BaCl₂2H₂O as precursors, with HCl as a catalyst. The UV–visibleabsorption spectra of the doped samples are almost the same as those of the undoped sample. The absorption bands of alkaline earth metallic ions have not been observed in the doped samples. Strong visible light has been observed from sol- gel silica glasses doped with alkaline earth metallic ions. The relative fluorescence intensity of the Sr²⁺-doped (the impurity mole ratio of Sr²⁺ was 0.268%) and the Ba²⁺-doped (the impurity mole ratio of Ba²⁺ was 0.448%) samples was about 4 times that of the undoped sample. The relative fluorescence intensity of the Mg²⁺-doped (the impurity mole ratio of Mg²⁺ was 0.069%) sample was about 2.5 times that of the pure glass sample. The relative fluorescence intensity of the Ca²⁺- doped (the impurity mole ratio of Ca²⁺ was 0.179%) sample was about 3 times that of the pure glass sample. Alkaline earth metallic ions affect the formation and conversion of luminescent defects in sol-gel silica glass. Thus, the relative fluorescence intensity of the doped samples increases more than that of the undoped sample. Received: 17 April 2001 / Accepted: 6 June 2001 / Published online: 30 August 2001     

Crystal structure and photoluminescence of (Ba1−x−ySryEux)9Sc2Si6O24

Divalent europium-doped alkaline earth metal silicate phosphors, (Ba_1?x?ySr_yEu_x)₉Sc₂Si₆O₂₄ (x=0.005–0.1, y=0–0.95), have been successfully prepared by solid-state reaction at 1350 °C. The analysis of X-ray diffraction shows that the compounds are in a single phase at the proper concentration of Sr²⁺. At room temperature, the Eu²⁺-activated Ba₉Sc₂Si₆O₂₄ phosphor exhibits a single emission band peaking at about 506 nm. With the increasing content of Sr²⁺, the luminescent intensity of (Ba_1?x?ySr_yEu_x)₉Sc₂Si₆O₂₄ weakens, and the emission peak shifts towards red. Luminescence concentration quenching occurs when Eu²⁺ content x is more than 1 mol% in (Ba_1?x?ySr_yEu_x)₉Sc₂Si₆O₂₄ (y=0/0.2). At low temperatures (Ba_0.9?ySr_yEu_0.1)₉Sc₂Si₆O₂₄ (y=0/0.2) phosphors have two emission bands corresponding to different Eu²⁺ crystallographic sites. The high energy peak (P₁) is quenched at room temperature, while the low energy peak (P₂) weakens much more slowly owing to the energy transfer from P₁ to P₂.     

Effect of Ca and Sr alkaline earth ions on luminescence properties of BaAl12O19:Eu nanophosphor

Nanosized barium aluminate materials was doped by divalent cations (Ca²⁺, Sr²⁺) and Eu²⁺ having nominal compositions Ba_1−xMxAl₁₂O₁₉:Eu (M=Ca and Sr) (x=0.1-0.5), were synthesized by the combustion method. These phosphors were characterized by XRD, scanning electron microscopy-energy-dispersive spectrometry (SEM-EDS) and photoluminescence measurement. The photoluminescence characterization showed the presence of Eu ion in divalent form which gave emission bands peaking at 444 nm for the 320 nm excitation (solid-state lighting excitation), while for 254 nm it gave the same emission wavelength of low intensity (1.5 times) compared to 320 nm excitation. It was also observed that alkaline earth metal (Ca²⁺ and Sr²⁺) dopants increase the intensity of Eu²⁺ ion in BaAl₁₂O₁₉ lattice, thus this phosphor may be useful for solid-state lighting.     

A theoretical study of alkaline-earth cations in crystalline sodium chloride,potassium chloride and potassium bromide

Theoretical methods, based on Mott-Littleton techniques are used to investigate the defect structures of alkali-halide crystals doped with divalent ions. The systems studied are those having Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ as impurity ions in NaCl, KCl and KBr crystals. Our calculations find comparable stability of the (110) nearest-neighbour and (200) next-nearest-neighbour complexes whereas the (211) complex is found to be less stable. Significant trends in the variation of binding energy with dopant ion radius are predicted. We also consider the activation energies for the w₁, w₂, w₃ and w₄ type jumps which occur in the vicinity of the impurity ion. The results are, where possible, compared with experimentally determined defect energies and their implications in diffusion processes of M²⁺ impurities in the alkali halides are discussed.     

Luminescence enhancement by energy transfer from Ce ions in Ba1.6Ca0.4P2O7:Ce:Tb phosphor

The optical properties of Ba_1.6Ca_0.4P₂O₇ doped with Ce³⁺ and Tb³⁺ are investigated. Under excitation at 280 nm the emission spectrum of Ba_1.6Ca_0.4P₂O₇:Ce³⁺ consists of a peak at 370 nm and a shoulder at the longer wavelength side. The emission spectra of Ba_1.6Ca_0.4P₂O₇:Tb³⁺ shows the well-known emission lines due to ⁵D₄-⁷F_J transitions of Tb³⁺. The green emissions of Tb³⁺ ions are enhanced upon UV excitation through energy transfer from Ce³⁺ to Tb³⁺ ions. The efficiency of such an energy transfer is estimated based on spectroscopic data. The dependence of photoluminescence (PL) intensities of Ce³⁺ and Tb³⁺ emissions on Ce³⁺ or Tb³⁺ concentrations in the systems (Ba_1.6Ca_0.4P₂O₇:0.04Ce³⁺,xTb³⁺ and Ba_1.6Ca_0.4P₂O₇:xCe³⁺,0.04Tb³⁺) and the temperature dependence of PL emission spectra of Ba_1.6Ca_0.4P₂O₇:0.06Ce³⁺,0.04Tb³⁺ is also investigated.     

Local structure of Tm<Superscript>2+</Superscript> and Yb<Superscript>3+</Superscript> impurity centers in <Emphasis Type="Italic">Me</Emphasis>F<Subscript>2</Subscript> (<Emphasis Type="Italic">Me</Emphasis> = Ca,Sr, Ba) fluoride crystals

The local structure of Tm²⁺ and Yb³⁺ cubic impurity centers in MeF₂: Tm²⁺ and MeF₂: Yb³⁺ (Me = Ca, Sr, Ba) fluoride crystals, as well as Yb³⁺ trigonal and tetragonal impurity centers in MeF₂: Yb ³⁺ crystals, is calculated within the shell model in the pair potential approximation.     

Luminescence and chromaticity of alkaline earth aluminate MxSr1−xAl2O4:Eu (M: Ca,Ba)

In order to prepare fluorescent material for UV-LED used as illumination light source, two series of Eu²⁺ doped (1 mol%) alkaline earth aluminate phosphors Ca_xSr_1−xAl₂O₄ and Ba_xSr_1−xAl₂O₄ were prepared. The crystal structure, relative quantum efficiency(Qr), peak wavelength(λ_p), color tuning and chromaticity were investigated by XRD patterns and photoluminescence (PL) on samples prepared by solid solution system (s series) and powder mixing system (m series) respectively. For the s series, the synthesized Ca_xSr_1−xAl₂O₄:Eu²⁺ powders show that the structure transforms from monoclinic to hexagonal at x?0.5, and λ_p increases from 442.3 to 529.7 nm with decreasing x. For the Ba_xSr_1−xAl₂O₄:Eu²⁺ system, the structure transforms from monoclinic to hexagonal at x?0.3, and λ_p decreases from 520.5 to 502.2 nm continuously from x=0 to 1. The shift in λ_p could be explained by the crystal field effect, which is affected by different coulomb attractive forces due to the various fraction of alkaline earth cation in the host lattice. Different phosphor properties prepared by either solid solution or powder mixing methods were characterized by chromaticity measurements for both reflective and transmissive modes.     

Luminescent properties of stabled hexagonal phase Sr1−xBaxAl2O4:Eu (x=0.37-0.70)

Stabled hexagonal phase Sr_1−xBa_xAl₂O₄:Eu²⁺ (x=0.37-0.70) was prepared by solid-state method. Result revealed that the structure behavior of the SrAl₂O₄:Eu²⁺ calcined at 1350 °C in a reducing atmosphere for 5 h strongly depended on the Ba²⁺ concentration. With increasing Ba²⁺ concentration, a characteristic hexagonal phase can be observed. When 37-70% of the strontium is replaced by barium, the structure of the prepared sample is pure hexagonal. Photoluminescence and excitation spectra of the samples with different x and doped with 2% Eu²⁺ were investigated. Changes in the emission spectra were observed in the two different phases. The green emission at 505 nm from Eu²⁺ was found to be quite strong in the hexagonal phase. The intensity and peak position of the green luminescence from Eu²⁺ changed with increasing content of Ba²⁺. The strongest green emission was obtained from Sr_0.61Ba_0.37Al₂O₄:Eu²⁺. The decay characteristics of Sr_1−xBa_xAl₂O₄:Eu²⁺ (x=0.37-0.70) showed that the life times also varied with the value of x. Furthermore, the emission colors and decay times varying with x could be ascribed to the variation of crystal lattice.     

Spectral luminescence properties of Ca1 ? x Sr x F2:Ce3+ (0 < x <1) crystals

The luminescence, reflection, and luminescence excitation spectra of two-component Ca_{1 ? x} Sr _x F₂:Ce³⁺ (0.05 mol %) (x = 0.14, 0.25, 0.4, 0.6, and 0.75) have been studied at room temperature and T = 8 K. It is shown that the luminescence bands (upon 130-eV photon excitation) in the range of 200 to 400 nm are attributed to singlet and triplet self-trapped exciton luminescence and to 5d-4f transitions in Ce³⁺.     

White light-emitting diodes using blue and yellow-orange-emitting phosphors

A blue-emitting phosphor, BaMgAl₁₀O₁₇:Eu²⁺ (BAM) and a yellow-orange phosphor, Ba²⁺-codoped Sr₃SiO₅:Eu²⁺ were prepared by the solid-state reaction. Excitation and emission spectra results showed that BAM and Ba²⁺-codoped Sr₃SiO₅:Eu²⁺ can be efficiently excited by near-ultraviolet (n-UV)-visible light from 250 to 440 nm. The effects of the doped-Eu²⁺ concentration in BAM and Ba²⁺-codoped Sr₃SiO₅:Eu²⁺ on the photoluminescence were investigated in detail. White light-emitting diodes (LED) was obtained by combining n-UV LED chip (GaN-based 380 nm emitting) with BaMgAl₁₀O₁₇:0.09Eu²⁺ and 0.1Ba²⁺-codoped Sr₃SiO₅: 0.2Eu²⁺ phosphors with the characteristic of color-rendering index of 86, CIE chromaticity coordinates (x,y) of (0.3216,0.3096), and color temperature T_c of 5700 K. As the current increases, the relative intensity simultaneously increases. The CIE chromaticity coordinates (x,y) of the white LED tends to decrease. The correlated color temperature T_c increases from 4100 to 7500 K and the color-rendering index R_a increases from 82 to 87 simultaneously.