Motion of a cylinder in a viscous electroconductive medium with a magnetic field

The method of force sources is used to consider the planar problem of the motion of a circular cylinder in a viscous electroconductive medium with a magnetic field. The conventional and magnetic Reynolds numbers are assumed to be small. Expressions are obtained for the hydrodynamic reaction forces of the medium, acting on the moving cylinder. It is shown that as a result of the flow anisotropy in the medium, caused by the magnetic field, in addition to the resistance forces on bodies moving at an angle to the field, there are deflecting forces perpendicular to the velocity vector. The velocity field disturbances at great distances from the moving cylinder are determined.The problems of viscous electroconductive flow about solid bodies in the presence of a magnetic field constitute one of the divisions of magnetohydrodynamics. Motion of an electroconductive medium in a magnetic field gives rise to inductive electromagnetic fields and currents which interact with the velocity and pressure hydrodynamic fields in the medium [1, 2]. Under conditions of sufficiently strong interaction, the number of independent flow similarity parameters in MHD is considerably greater than in conventional hydrodynamics. This circumstance complicates the theoretical analysis of MHD flow about bodies, and therefore we must limit ourselves to consideration of individual particular flow cases.Here we consider the linear problem of the motion of an infinite circular cylinder in a viscous incompressible medium with finite electroconductivity located in a uniform magnetic field.There are many studies devoted to the flow of a viscous electroconductive medium with a magnetic field about solid bodies (see, for example, [3–5]). Because of this, some of the results obtained here include previously known results, which will be indicated below. In contrast to the cited studies, the examination is made by the method of force sources, suggested in [6]. This method permits obtaining integral equations for the distribution of the forces acting on the surface of the moving body. Their solution is obtained for small Reynolds and Hartmann numbers. Then the nature of the velocity disturbances at great distances from the body are determined. These results are compared with conventional viscous flow about a cylinder in the Oseen approximation.     

Strongly exothermic explosions in a cylindrical pipe: a case study of series summation technique

In this paper, the steady state solutions for the strongly exothermic decomposition of a combustible material uniformly distributed in a heated cylindrical pipe under Bimolecular, Arrhenius and Sensitised reaction rates, neglecting the consumption of the material are examined. Analytical solutions are constructed for the governing nonlinear boundary-value problem using perturbation technique together with a special type of Hermite–Padé approximants and important properties of the temperature field including bifurcations and thermal criticality are discussed.     

二维后向台阶流流动特性的实验研究

利用PIV技术,通过系统对150相似文献   

Flow of colloidal suspension and irreversibility analysis with aggregation kinematics of nanoparticles in a microchannel

The current exploration focuses on the ethylene glycol (EG) based nanoliquid flow in a microchannel. The effectiveness of the internal heat source and linear radiation is reflected in the present investigation. The estimation of suitable thermal conductivity model has affirmative impact on the convective heat transfer phenomenon. The examination is conceded with the nanoparticle aggregation demonstrated by the MaxwellBruggeman and Krieger-Dougherty models which tackle the formation of nanolayer. These models effectively describe the thermal conductivity and viscosity correspondingly. The dimensionless mathematical expressions are solved numerically by the Runge Kutta Fehlberg approach. A higher thermal field is attained for the Bruggeman model due to the formation of thermal bridge. A second law analysis is carried out to predict the sources of irreversibility associated with the thermal system. It is remarked that lesser entropy generation is obtained for the aggregation model. The entropy generation rate declines with the slip flow and the thermal heat flux. A notable enhancement in the Bejan number is attained by increasing the Biot number. It is established that the nanoparticle aggragation model exhibits a higher Bejan number in comparision with the usual flow model.     

Effect of swirl intensity on the flow and combustion of a turbulent non-premixed flat flame

An experiment in a turbulent non-premixed flat flame was carried out in order to investigate the effect of swirl intensity on the flow and combustion characteristics. First, stream lines and velocity distribution in the flow field were obtained using PIV (Particle Image Velocimetry) method in a model burner. In contrast with the axial flow without swirl, highly swirled air induced streamlines going along the burner tile, and its backward flow was generated by recirculation in the center zone of the flow field. In the combustion, the flame shape with swirled air also became flat and stable along the burner tile with increment of the swirl number. Flame structure was examined by measuring OH and CH radicals intensity and by calculating Damkohler number (Da) and turbulence Reynolds number (Re _T ). It appeared that luminescence intensity decreased at higher swirl number due to the recirculated flue gas, and the flat flames were comprised in the wrinkled laminar-flame regime. Backward flow by recirculation of the flue gas widely contacted on the flame front, and decreased the flame temperature and emissions concentration as thermal NO. The homogeneous temperature field due to the widely flat flame was obtained, and the RMS in the high temperature region was rather lower at higher swirl number. Consequently, the stable flat flame with low NO concentration was achieved.     

Experimental and numerical investigations of fluid flow and heat transfer in a cryogenic tank at loss of vacuum

The transient process of thermal stratification in liquid nitrogen (LN₂) induced by lose of vacuum in a multi-layer insulated cryogenic tank is investigated both experimentally and numerically. In the experiments, distribution and evolution of the liquid temperature is obtained using thermocouples. Then, two-dimensional numerical computations are performed, using the two-fluid model together with nucleate boiling model as the closure correlations. Comparison of the numerical results against the experimental data illustrates that the process of thermal stratification forming and weakening, as well as the liquid temperature field are satisfactorily simulated. The computed results of liquid flow field contribute to the understanding of this transient process. It is also demonstrated that the two-phase flow in the tank plays an important role on thermal stratification.     

导电流体热对流中磁场的致稳作用

本文导出了在磁场作用下导电流体热对流流动的方程组及其定解条件,用数值方法模拟了由磁场控制的单晶生长热对流问题,计算结果说明磁场可以有效地抑制流动在壁面处的分离、单胞对流变为多胞对流以及速度和温度的振荡等热不稳定现象,说明了磁场对不稳定热对流有明显的致稳作用。     

Prediction of oscillating thick cambered aerofoil aerodynamics by a locally analytic method

A complete first-order model and locally analytic solution method are developed to analyse the effects of mean flow incidence and aerofoil camber and thickness on the incompressible aerodynamics of an oscillating aerofoil. This method incorporates analytic solutions, with the discrete algebraic equations which represent the differential flow field equations obtained from analytic solutions in individual grid elements. The velocity potential is separated into steady and unsteady harmonic parts, with the unsteady potential further decomposed into circulatory and non-circulatory components. These velocity potentials are individually described by Laplace equations. The steady velocity potential is independent of the unsteady flow field. However, the unsteady flow is coupled to the steady flow field through the boundary conditions on the oscillating aerofoil. A body-fitted computational grid is then utilized. Solutions for both the steady and the coupled unsteady flow fields are obtained by a locally analytic numerical method in which locally analytic solutions in individual grid elements are determined. The complete flow field solution is obtained by assembling these locally analytic solutions. This model and solution method are shown to accurately predict the Theodorsen oscillating flat plate classical solution. Locally analytic solutions for a series of Joukowski aerofoils demonstrate the strong coupling between the aerofoil unsteady and steady flow fields, i.e. the strong dependence of the oscillating aerofoil aerodynamics on the steady flow effects of mean flow incidence angle and aerofoil camber and thickness.     

Thermal nonequilibrium,non-darcian forced convection in a channel filled with a fluid saturated porous medium—A perturbation solution

This paper concentrates on the analysis of the thermal nonequilibrium effects during forced convection in a parallel-plate channel filled with a fluid saturated porous medium. The flow in a channel is described by the Brinkman-Forchheimer-extended Darcy equation and the thermal nonequilibrium effects are accounted for by utilizing the two energy equations model. Applying the perturbation technique, an analytical solution of the problem is obtained. It is established that the temperature difference between the fluid and solid phases for the steady fully developed flow is proportional to the ratio of the flow velocity to the mean velocity. This results in a local thermal equilibrium at the walls of the channel if the Brinkman term which allows for the no-slip boundary condition at the walls is included into the momentum equation.     

逆向喷流流场模态分析及减阻特性研究

逆向喷流减阻的基本原理是利用逆向高速喷流与飞行器绕流的相互作用，使飞行器周围的流场结构发生变化，致使飞行器的气动特性发生改变，从而改善飞行器的气动性能。利用数值模拟方法对轴对称球头、截锥的逆向喷流流场开展了研究，考虑了高温非平衡化学反应对流场的影响。模拟了球头和截锥在不同总压比时流场不同的模态：长穿透流模态（LPM）和短穿透流模态（SPM），得到了不同模态下钝体表面压力、气动力系数和不同模态之间转换的瞬态效应．简单分析了喷流在减阻方面的应用，给出了几个喷口参数与减阻效率之间的关系，提出了喷流减阻工程应用时应考虑的主要因素。     

功能梯度材料热传导问题的近场动力学模型

当材料中存在不连续性缺陷的时候,传统的基于连续介质理论的方法在研究热传导问题时存在诸多不便．我们基于近场动力学方法(Peridynamics)建立了功能梯度材料的热传导模型,并且研究了在温度荷载作用下功能梯度材料的温度场的变化表现．该文概述了PD方法应用于热传导问题时的详细理论基础,描述了其建模思路以及计算体系,给出了使用PD方法模拟结构承受温度荷载时的计算格式,讨论了不同梯度形式对功能梯度材料内热传导的影响．算例结果表明：通过PD模型所得到的温度场与解析解吻合较好,证明了PD方法在分析功能梯度材料热传导行为等问题时的可行性．     

Convective instability of Marangoni-Poiseuille flow under a longitudinal temperature gradient

An exact solution is obtained for the problem of steady flow in a system of two horizontal layers of immiscible fluids with a common interface. The stability of the flow is studied by a linearization method. It is shown that the occurrence of instabilities is due to the different governing parameters of the fluids (thickness, heating conditions, viscous and thermal conductivity of the fluids). It is found that under constant gravity conditions, the perturbations are monotonic, and in zero gravity, oscillatory thermocapillary instability occurs.     

A fluid–structure interaction model for stability analysis of shells conveying fluid

In this paper, a fluid–structure interaction model for stability analysis of shells conveying fluid is developed. This model is developed for shells of arbitrary geometry and structure and is based on incompressible potential flow. The boundary element method is applied to model the potential flow. The fluid dynamics model is derived by using an inflow/outflow model along with the impermeability condition at the fluid–shell interface. This model is applied to obtain the flow modes and eigenvalues, which are used for the modal representation of the flow field in the shell. Based on the mode shapes and natural frequencies of the shell obtained from an FEM model, the modal analysis technique is used for structural modeling of the shell. Using the linearized Bernoulli equation for unsteady pressure on the fluid–shell interface in combination with the virtual work principle, the generalized structural forces are obtained in terms of the modal coordinates of the fluid flow and the coupled field equations of the fluid–structure are derived. The obtained model is validated by comparison with results in the literature, and very good agreement is demonstrated. Then, some examples are provided to demonstrate the application of the present model to determining the stability conditions of shells with arbitrary geometries.     

Analytical solutions for thermal forcing vortices in boundary layer and its applications

Using the Boussinesq approximation, the vortex in the boundary layer is assumed to be axisymmetrical and thermal-wind balanced system forced by diabatic heating and friction, and is solved as an initial-value problem of linearized vortex equation set in cylindrical coordinates. The impacts of thermal forcing on the flow field structure of vortex are analyzed. It is found that thermal forcing has significant impacts on the flow field structure, and the material representative forms of these impacts are closely related to the radial distribution of heating. The discussion for the analytical solutions for the vortex in the boundary layer can explain some main structures of the vortex over the Tibetan Plateau.     

Local nonsimilarity solution for the impact of the buoyancy force on heat and mass transfer in a flow over a porous wedge with a heat source in the presence of suction/injection

Combined heat and mass transfer in free, forced and mixed convection flows along a porous wedge with internal heat generation in the presence of uniform suction or injection is investigated. The boundary-layer analysis is formulated in terms of the combined thermal and solute buoyancy effect. The flow field characteristics are analyzed using the Runge-Kutta-Gill method, the shooting method, and the local nonsimilarity method. Due to the effect of the buoyancy force, power law of temperature and concentration, and suction/injection on the wall of the wedge, the flow field is locally nonsimilar. Numerical calculations up to third-order level of truncation are carried out for different values of dimensionless parameters as a special case. The effects of the buoyancy force, suction, heat generation, and variable wall temperature and concentration on the dimensionless velocity, temperature, and concentration profiles are studied. The results obtained are found to be in good agreement with previously published works.     

Coupled fields in a deformable unsaturated medium

This paper considers several problems involving coupled heat–moisture–air flow indeformable unsaturated media. A set of coupled non-linear governing equations expressed in terms of displacements, capillary pressure, air pressure and temperature are used in the analysis. The mathematical model accounts for fully coupled heat and moisture flow, volume strain effects on water-air-heat flow, stress and temperature dependence of the water retention curve, heat sink due to thermal expansion, phase change between liquid water and vapour water, and compressibility of liquid water. Numerical solutions are obtained by using the finite element method. Comparisons with existing analytical and experimental results for problems involving infiltration, drying–rewetting (hysteresis effects) and heating confirm the general validity of the present mathematical model. Coupled fields in a confined clay cylinder are also examined. It is found that consideration of absorbed liquid flow due to thermal gradients (thermo-osmosis effect) results in increased drying and shrinkage near the heated boundary. The case of a confined clay cylinder under combined heating and infiltration is also studied. Important features of coupled fields are discussed.     

Effects of Viscous Dissipation on Unsteady Free Convection in a Fluid Past a Vertical Plate Immersed in a Porous Medium

The effects of viscous dissipation on unsteady free convection from an isothermal vertical flat plate in a fluid saturated porous medium are examined numerically. The Darcy–Brinkman–Forchheimer model is employed to describe the flow field. A new model of viscous dissipation is used for the Darcy–Brinkman–Forchheimer model of porous media. The simultaneous development of the momentum and thermal boundary layers are obtained by using a finite difference method. Boundary layer and Boussinesq approximation have been incorporated. Numerical calculations are carried out for various parameters entering into the problem. Velocity and temperature profiles as well as local friction factor and local Nusselt number are shown graphically. It is found that as time approaches infinity, the values of friction factor and heat transfer coefficient approach steady state.     

Rotating flow of a second-order fluid on a porous plate

A study is made of the unsteady flow engendered in a second-order incompressible, rotating fluid by an infinite porous plate exhibiting non-torsional oscillation of a given frequency. The porous character of the plate and the non-Newtonian effect of the fluid increase the order of the partial differential equation (it increases up to third order). The solution of the initial value problem is obtained by the method of Laplace transform. The effect of material parameters on the flow is given explicitly and several limiting cases are deduced. It is found that a non-Newtonian effect is present in the velocity field for both the unsteady and steady-state cases. Once again for a second-order fluid, it is also found that except for the resonant case the asymptotic steady solution exists for blowing. Furthermore, the structure of the associated boundary layers is determined.     

Supersonic Flow Past a Thermal Source

The results of an experimental investigation and numerical simulation of a gasdynamic structure formed as a result of supersonic flow past a pulsating thermal source are presented. Heat was supplied to the flow by producing a limited plasma volume as a result of the breakdown of the focused radiation of a CO₂ laser operating in the pulse periodic regime. On the basis of the experimental data obtained, a thermal source model was developed and accepted for further numerical calculations. The calculations were carried out within the framework of the inviscid gas model using the TVD scheme and nonreflecting boundary conditions. The effect of the relevant gasdynamic and energetic parameters on the flow pattern associated with the studied phenomenon is established. Data on the flow parameter distributions in the wake of the thermal source are obtained as a function of the freestream Mach number.