高效多孔层毛细管柱吸附气相色谱的研究进展

PLOT柱是用于永久性气体,低碳烃和挥发性化合物色谱分析的最有效的工具,经常用于替代经典填充柱,对多孔层开管毛细管柱（PLOT）吸附色谱的分离机理、PLOT柱制备方法和各类吸附剂的色谱特性及其特定应用进行了综述。     

Simultaneous detection of total and halogenated hydrocarbons in complex environmental samples

A state-of-the-art gas chromatographic system for automatic simultaneous detection of halogenated and normal hydrocarbons has been developed, which consists of a standard Hewlett-Packard 5880 with a fused silica capillary column, whose effluent is split between the standard flame ionization detector and a Tracor Hall electroconductivity detector. The system provedes excellent capillary chromatography results and high sensitivity for halogenated compounds (a detection limit of 1 ppm Archlor 1254 in fuel oil). Reliability has been provides in the daily analysis of complex environmental samples. Emergency response cleanup and the containment of hazardous chemical spills and chemical dump sites forces one to deal with samples that are very complex. The contain large numbers of naturally occurring organic compounds and varying types of organic pollutants. Capillary chromatographic techniques of gas chromatographic and gas chromatographic/mass spectrometric analyses are necessary to achieve the resolution required for the analysis of these samples.     

Analysis of polycyclic aromatic hydrocarbons in solid sample material using a desorption device coupled to a GC/MS system

Summary Polycyclic aromatic hydrocarbons (PAH) today are ubiquitous detectable constituents of recent sediments. The compounds are adsorbed on particulate emissions and are thus transferred to the environment. To date the analysis of PAH in sediments, dust samples and plant material is based mainly on the application of solvent-extraction methods followed by liquid chromatography and/or gas chromatographic separation of the extracts.An alternative approach for the analysis of PAH in solid samples such as coal, sediments, dust samples and plant waxes is shown in this contribution. A commercially available device for the analysis of volatile compounds present in solid matter is connected on-line to a GC/MS system. The device enables the thermal desorption of hydrocarbons at a temperature of 320°C. Subsequently, the hydrocarbons trapped on the initial part of the capillary column are analyzed by GC/MS. The application of mass chromatography provides the possibility of detection and quantitation of PAH in complex mixtures even when they coelute with other compounds. The sample amount required varies between 1 and 10 mg depending on the hydrocarbon content.     

The Use of Automated Headspace Gas Chromatography for Determination of 1,1,1-Trichloroethane in Rat Blood and Brain Tissue

Abstract

1,1,1-trichloroethane in blood and brain tissue from rats which had been artificially ventilated with solvent (8000 ppm) was analysed by automated headspace gas chromatography using a fused silica capillary column. A given concentration of 1,1,1-trichloroethane in the brain could be correlated with a corresponding concentration in the blood; both the uptake and release of the solvent were quicker in blood than in brain. No volatile metabolites of the solvent were found. Automated headspace gas chromatographic analysis is a rapid and sensitive technique for the quantitative registration of volatile organic solvents, e.g. of industrial importance, in body fluids and tissues.     

Analysis of turkish lignite tar by coupled LC/GC,GC/MS,and capillary SFC

This work describes the analysis of a pyrolysis product of a lignite sample obtained from the Turkish Goynuk reserve. The aliphatic, aromatic and polar compounds present in the tar are separated and identified by various chromatographic techniques: Capillary gas chromatography/mass spectrometry (GC/MS), on-line high performance microbore liquid chromatography/capillary gas chromatography (LC/GC) and capillary supercritical fluid chromatography (SFC). The suitability of each technique for this particular application is discussed, and semi-quantitative results are presented for the major components detected.     

A simple multisensor detector based on tin dioxide in capillary gas chromatography

The use of an array of metal oxide film sensors as a detector for volatile organic compounds in capillary gas chromatography is described. The results of determination of the sensitivity, response time, and linearity range of the analytical signals from sensors are presented; these parameters are compared with similar characteristics of commercial gas chromatographic detectors. An approach is proposed to the identification of organic compounds by the shape and relative size of responses of individual sensors. It is demonstrated that the multisensor detector is applicable to solving typical analytical problems of the quantitative analysis of multicomponent mixtures.     

气相色谱指纹图谱用于连翘的质量控制

建立连翘挥发油的指纹图谱测定分析方法 ,为含连翘中药制剂制定指纹图谱奠定基础。采用水蒸汽蒸馏法提取不同产地连翘的挥发油 ,用毛细管气相色谱技术测定其指纹图谱 (GC FPS) ,并选用模糊聚类法分析比较。该方法灵敏度高 ,谱图有较好的重现性 ,样品稳定性好 ,1 1种连翘色谱峰重叠率 >97%。聚类分析法使谱图分析更为快速、准确 ,适用于连翘的质量控制     

Direct identification of pentoses and hexoses by pyrolysis/capillary gas chromatography

The combination of rapid pyrolysis and capillary-column gas chromatography (pyrolysis/capillary g.c.) was used to identify the stereoisomers of pentoses and hexoses. Analytical pyrolysis is shown to be a viable alternative to the formation of volatile derivatives of carbohydrates for chromatographic separation. The individual stereoisomers (glucose, galactose, arabinose, xylose etc.) were positively identified by the retention times of their distinctive anhydrosugar products. The aldohexoses formed both 1,6-anhydrohexopyranose and 1,6-anhydrohexofuranose products; the aldopentoses formed 1,4-anhydropentopyranose products; and the ketohexoses, to a lesser extent, formed 2,6-anhydrohexofuranose products. The anhydrosugars were identified by mass spectrometry and many were authenticated with standard samples. Pyrolysis/capillary g.c. is rapid and direct and is useful for solids and solutions and for microscale samples. Sample preparation or prior derivatization is not required. Experimental parameters that are important for structural characterization and reproducibility include samples size, pyrolysis temperature, transfer zones and the type and film thickness of the capillary column.     

快速气相色谱法分析石油饱和烃

提出了一种快速分析原油和岩石抽提物中饱和烃组分的毛细管气相色谱(GC)方法。由于在该方法中采用了细内径毛细管柱,故饱和烃的GC分析周期由原来的80~90 min缩短至15 min,分析速度加快约5倍,大大提高了工作效率和仪器通量,使石油饱和烃得到了很好的分离分析。该方法符合中华人民共和国石油天然气行业标准SY/T5120-1997的要求。20万理论塔板数的细径柱的应用,可供石油中异构烷烃,尤其是甾烷、萜烷类的气相色谱/质谱(GC/MS)快速分析方法及芳烃的GC快速分析方法借鉴。     

Automated analysis of volatile halogenated hydrocarbons in rainwater and ambient air by purge and trap capillary gas chromatography

An automated system employing a purge and trap technique with capillary gas chromatography and electron-capture detection (ECD) has been developed for the analysis of trace levels of volatile halogenated hydrocarbons and applied to the determination of the compounds in environmental samples such as rainwater and ambient air. The operation of the method, its application to environmental samples, and the results obtained are described. Use of the system ensured good chromatographic resolution and high accuracy, even with trace levels of the compounds.     

Capillary gas chromatographic analysis of volatile and non-volatile organic acids from biological samples as the t-butyldimethylsilyl derivatives

A quantitative procedure for the analysis of volatile organic acids and lactic acid in silage is described. The samples were extracted with diethyl ether, derivatized by t-butyldimethylsilylation, and then separated by capillary gas chromatography. The same procedure was useful for the identification by gas chromatography/mass spectrometry of organic acids in samples such as the metabolic fermentation products of anaerobic bacteria.     

A new method for solvent-free application of polymers and inorganic materials to ferromagnetic wires used for pyrolysis-capillary gas chromatographic studies

A method is described that enables soluble and insoluble samples to be applied to ferromagnetic wires. The principle of the method consists in pressing the sample on to a flattened Curie-point wire at a pressure of 15 tonnes. It is shown that this method is suitable for a wide variety of polymers and for inorganic materials. As the pyrolysis—gas chromatographic results obtained are not only influenced by the pyrolysis itself but also to a large extent by the gas chromatographic process, a number of considerations are given with respect to the use of capillary gas chromatography in combination with a Curie-point pyrolyser. The sample application technique described has also been used to check the inertness of the chromatographic system by the preparation of Curie wires loaded with Tenax. These wires have been used for the “injection” of volatile compounds, such as a Grob mixture, with the pyrolyser system.     

Modification of glass capillary gas chromatographic columns by alkylation of the glass surface with pentafluorobenzyl bromide

Summary Glass surface alkylation with pentafluorobenzyl (PFB) bromide yields glass capillary gas chromatographic columns with modified retention characteristics. Glass-alkylated OV-225 columns have been tested in the analysis of PFB fluoroacetate, and the substantial increase in retention time of this highly volatile compound was found to improve the precision of analysis. PFB-alkylated columns should prove generally useful in gas chromatographic analysis of small relative molecular mass compounds.     

High temperature gas chromatography: The development of new aluminum clad flexible fused silica glass capillary columns coated with thermostable nonpolar phases: Part 2

Samples, representative of certain classes of “high molecular weight” and/or less volatile substances, were analyzed by gas chromatography utilizing a new generation of aluminum clad flexible fused silica glass capillary columns containing thin films of a methyl polysioxane stationary phase capable of being operated isothermally to 400–425°C and temperature programmed to 425–440°C. The results obtained here were compared with those described in the literature discussing the latest advances in Supercritical Fluid Chromatography (SFC) in the analysis of precisely the same types of samples. In all instances, the gas chromatographic method provided superior speed of analysis, superior column efficiency, and superior resolution of the component bands. This was due to fundamental factors, favoring the diffusivity of the solutes in both the gas and liquid phases in this process at these high temperatures. Under these circumstances, it is thought that the strength of SFC mainly lies in the analysis of thermally labile samples until the advocates of this technique make more definitive strides in the handling of still higher molecular weight substances well beyond the newly expanded range of gas chromatography.     

Analysis of Wine Bouquet Components Using Headspace Solid-Phase Microextraction-Capillary Gas Chromatography

Headspace solid-phase microextraction (HS/SPME) was studied and optimized for the capillary gas chromatographic (CGC) analysis of wine aroma compounds. The results were compared with those obtained using the direct sampling mode (DI/SPME) and using liquid/liquid extraction with Kaltron. The aromatic patterns obtained by HS/SPME-CGC were applied to the chemometric classification of wine varieties. The HS/SPME-CGC standard additional method is an appropriate technique for the quantitative analysis of volatile wine aroma compounds.     

Gas chromatographic headspace analysis: its theory and applications

Gas chromatographic headspace analysis is concerned predominantly with the determination of traces of volatile compounds in samples which are difficult to analyse by conventional gas chromatography.     

Rapid extraction and analysis of organic compounds from solid samples using coupled supercritical fluid extraction/gas chromatography

Summary Direct coupling of supercritical fluid extractions with gas chromatography (SFE-GC) allows the extraction, concentration, and gas chromatographic analysis of organic analytes from solid samples to be performed in less than 1 h. Coupling of the supercritical fluid extraction step with a capillary gas chromatographic column is achieved using a standard on-column injector and requires no modification of the gas chromatograph. Maximum sensitivity is achieved and analyte degradation or loss is minimized since the extracted species are quantitatively transferred into the fusedsilica capillary gas chromatographic column where they are cryogenically focused prior to normal gas chromatographic analysis using flame ionization (SFE-GC/FID) or mass spectral (SFE-GC/MS) detection. SFE-GC analysis yields good chromatographic peak shapes that compare favorably with those obtained using standard on-column injection techniques. Class-selective extractions can be achieved by performing multiple SFE-GC analyses with different extraction pressures. The ability of coupled SFE-GC to yield rapid extraction and analysis of organic analytes is demonstrated for a variety of samples including polycyclic aromatic hydrocarbons (PAHs) from treated wood, urban dust, and river sediment, phenolic species from wood smoke particulates, nicotine from tobacco, biological markers from coal, and flavor components from food products.

---

Schnelle Extraktion und Analyse von organischen Verbindungen aus festen Proben durch Kopplung von Extraktion mit überkritischen fluiden Phasen und GC

     

Automatic system for rapid analysis of volatile compounds by purge-and-cold-trapping/capillary gas chromatography

A system for automatic analysis of volatile compounds by purge-and-cold-trapping/capillary gas chromatography is described. It is suitable for analysis of volatile compounds in a wide variety of samples, such as water, food products and environmental samples. Possibilities and limitations of the system are evaluated in relation to several parameters. The efficiency of different types of cryogenic trap (open tubular, coated, packed) is also investigated; it depends on purge-flow rate, temperature of trapping, and total purge volume. Examples of the analysis of volatile compounds in foods and water are given.     

Determination of polyol profiles in human urine by capillary gas chromatography

A new rapid capillary gas chromatographic method is described for the profile analysis of urinary polyols as their trifluoroacetyl derivatives. Ten urinary polyols: erythritol, threitol, fucitol, ribitol, arabinitol, xylitol, mannitol, glucitol, galactitol and myo-inositol were completely determined for the first time. Iditol was newly found in normal urine. Urinary polyols were verified by gas chromatography/mass spectrometry.     

Facilitating method development for reverse fill/flush flow modulation by using a tuneable auxiliary pressure source instead of a fixed bleed capillary

The conventional reverse fill/flush flow modulation for comprehensive two-dimensional gas chromatography requires a bleed capillary column to be connected to the outlet of the modulator channel. The purpose of this capillary, which does not contain the stationary phase, is to provide pressure resistance to the modulator channel flow. In this way, the desired modulator volumetric flow can be achieved, and channel over-filling can be avoided. Normally, the length and the internal diameter of the bleed capillary are chosen so as to obtain the modulator flow that is close to the flow of the first separation column. Thus, for any chosen set of chromatographic conditions, the required dimensions of the bleed capillary can be completely different, making the two-dimensional gas chromatography method development tedious and generating additional costs in consumables and analyst time. In this work, a tuneable pressure source generating a suitable backpressure was used instead of the fixed bleed capillary which has the advantage of the possibility to freely adapt the pressure resistance and generate the required modulator channel flow for any conditions. This set-up has been evaluated and compared in terms of the impact on the modulation performance to the set-up involving a fixed bleed capillary demonstrating comparable performance.