Sol-gel immobilized cyano-polydimethylsiloxane coating for capillary microextraction of aqueous trace analytes ranging from polycyclic aromatic hydrocarbons to free fatty acids

Sol-gel coating containing highly polar cyanopropyl and nonpolar poly(dimethylsiloxane) components (sol-gel CN-PDMS coating) was developed for capillary microextraction (CME). The sol-gel chemistry provided an efficient means to immobilize the CN-PDMS coating by establishing chemical anchorage between the coating and the fused silica capillary inner surface. This chemical bond provided excellent thermal and solvent stability to the created sol-gel coating. For the extraction of polar and nonpolar analytes, the upper allowable conditioning temperatures were 330 degrees C and 350 degrees C, respectively. To our knowledge, this is the first time when a CN-PDMS thick coating survived such a high operation temperature. The prepared sol-gel CN-PDMS coating provided effective extraction of polar and nonpolar analytes simultaneously from aqueous samples. The cyanopropyl moiety in sol-gel CN-PDMS coatings provided effective extraction of highly polar analytes such as free fatty acids, alcohols, and phenols without requiring derivatization, pH adjustment or salting out procedures. The PDMS moiety, on the other hand, provided efficient extraction of nonpolar analytes. The extraction properties of the sol-gel CN-PDMS coatings can be fine tuned via manipulation of relative proportions of 3-cyanopropyltriethoxysilane and hydroxy-terminated PDMS in the sol solution used to create the coatings. Detection limits of nanogram/liter (ng/L) were achieved for both highly polar and nonpolar analytes directly extracted from aqueous media using sol-gel CN-PDMS coated microextraction capillaries followed by GC analysis.     

Sol-gel immobilized short-chain poly(ethylene glycol) coating for capillary microextraction of underivatized polar analytes

Sol-gel coating with covalently bonded low-molecular-weight (MW<300 Da) poly(ethylene glycol) (PEG) chains was developed for capillary microextraction (CME). The sol-gel chemistry proved effective in the immobilization of low-molecular-weight PEGs thanks to the formation of chemical bonds between the organic-inorganic hybrid sol-gel PEG coating and the fused silica capillary inner surface. This chemical anchorage provided excellent thermal and solvent stability to the created sol-gel PEG coating as is evidenced by its high upper limit of allowable conditioning temperature (340 degrees C) and its practically identical performance before and after rinsing with various solvents. The prepared sol-gel PEG coating provided simultaneous extraction of moderately polar and highly polar analytes from aqueous samples without requiring derivatization, pH adjustment or salting-out procedures. Detection limits on the order of nanogram per liter (ng/L) were achieved in CME-GC-flame ionization detection experiments designed for the preconcentration and trace analysis of both highly polar and moderately polar compounds extracted directly from aqueous media using sol-gel short-chain PEG coated microextraction capillaries.     

Ultra-high-stability,pH-resistant sol–gel titania poly(tetrahydrofuran) coating for capillary microextraction on-line coupled to high-performance liquid chromatography

A sol–gel titania poly(tetrahydrofuran) (poly-THF) coating was developed for capillary microextraction hyphenated on-line with high-performance liquid chromatography (HPLC). Poly-THF was covalently bonded to the sol–gel titania network which, in turn, became chemically anchored to the inner surface of a 0.25 mm I.D. fused silica capillary. For sample preconcentration, a 38-cm segment of the sol–gel titania poly-THF coated capillary was installed on an HPLC injection port as a sampling loop. Aqueous samples containing a variety of analytes were passed through the capillary and, during this process, the analytes were extracted by the sol–gel titania poly-THF coating on the inner surface of the capillary. Using isocratic and gradient elution with acetonitrile/water mobile phases, the extracted analytes were desorbed into the on-line coupled HPLC column for separation and UV detection. The sol–gel titania poly-THF coating was especially efficient in extracting polar analytes, such as underivatized phenols, alcohols, amines, and aromatic carboxylic acids. In addition, this coating was capable of extracting moderately polar and nonpolar analytes, such as ketones and polycyclic aromatic hydrocarbons. The sol–gel titania poly-THF coated capillary was also able to extract polypeptides at pH values near their respective isoelectric points. Extraction of these compounds can be important for environmental and biomedical applications. The observed extraction behavior can be attributed to the polar and nonpolar moieties in the poly-THF structure. This coating was found to be stable under extremely low and high pH conditions—even after 18 h of exposure to 1 M HCl (pH ≈0.0) and 1 M NaOH (pH ≈14.0).     

Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME)

A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).     

Sol-gel methyl coating in capillary microextraction hyphenated on-line with high-performance liquid chromatography Counterintuitive extraction behavior for polar analytes

A sol-gel coating with anchored methyl groups was developed for capillary microextraction hyphenated on-line with high-performance liquid chromatography (HPLC). This was accomplished by using methyltrimethoxysilane as the sol-gel precursor. The methyl group on the sol-gel precursor ultimately turned into a pendant group on the created sol-gel coating and was primarily responsible for the extraction of nonpolar analytes. A 40-cm segment of 0.25mm I.D. fused silica capillary containing the sol-gel methyl coating on the inner surface was installed as a sampling loop in an HPLC injection port. The analytes were extracted by the coating when an aqueous sample containing the analytes was passed through this capillary. The extracted analytes were then transferred to the HPLC column using isocratic elution with an acetonitrile/water mobile phase. This capillary demonstrated excellent extraction capability for polycyclic aromatic hydrocarbons and ketones. Unexpectedly, this coating also provided good extraction for polar analytes, including aromatic phenols, alcohols, and amines. Considering the fact that the methyl group is nonpolar in nature, such an extraction behavior of sol-gel methyl coating toward polar analytes is counterintuitive. Thus, sol-gel sorbents with short alkyl side chains have the potential to offer a polymer-free alternative to traditional sol-gel capillary microextraction (CME) media commonly prepared with the use of polymers in the sol solution. Elimination of polymers from the sol-gel coating solution is conducive to improving thermal stability and solvent tolerance of the created sol-gel extracting phase. This also makes the preparation of sol-gel coatings facile and cost-effective. Possessing excellent solvent stability, such sol-gel coatings offer the opportunity for effective on-line hyphenation of capillary microextraction with HPLC and other liquid-phase separation techniques that employ organo-aqueous mobile phases.     

Sol–gel coatings with covalently attached methyl,octyl, and octadecyl ligands for capillary microextraction. Effects of alkyl chain length and sol–gel precursor concentration on extraction behavior

Fused silica capillaries with surface-bonded sol–gel coatings containing covalently attached octadecyl, octyl, and methyl groups were prepared for capillary microextraction (CME) hyphenated on-line with high-performance liquid chromatography (HPLC). For this, octadecyltrimethoxysilane (C₁₈TMS), octyltrimethoxysilane (C₈TMS), or methyltrimethoxysilane (MTMS) was used as the respective sol–gel precursor. Hydrolytic polycondensation of these precursors led to the formation of surface-bonded sol–gel sorbents with pendant alkyl groups ready to serve as the extraction medium; no additional surface derivatization reactions were needed to anchor these ligands to the surface. Extraction behaviors of two sets of microextraction capillaries with alkyl-bonded sol–gel coatings were investigated: (a) capillaries prepared with a constant molar concentration of these precursors in the sol solution, and (b) capillaries prepared with varied molar concentrations of C₈TMS in the sol solution. Among the capillaries prepared using sol solutions with the same molar concentration of sol–gel precursor, the detection limits for nonpolar and polar analytes ranged from 0.3 ng/L to 213.9 ng/L. The sol–gel octadecyl-coated capillaries were found to be the most efficient at extracting these analytes, followed by the sol–gel octyl-coated capillaries, followed by the sol–gel methyl-coated capillaries. The results of this study point to the possibility that polar analytes are extracted through synergistic molecular level interactions of the polar and nonpolar parts of the analyte molecules with the alkyl chains and silanol groups within the sol–gel coatings. These coatings also demonstrated run-to-run and capillary-to-capillary reproducibility, with HPLC peak area RSD values ranging from 1.1% to 9.6% and 1.3% to 10.0%, respectively. In the set of sol–gel octyl capillaries with varied molar concentrations, the capillaries prepared with 0.514 M concentration of C₈TMS in the sol solution were most efficient in extracting nonpolar and polar analytes. When higher or lower concentrations of C₈TMS were used in the sol solution, the resulting sol–gel coated capillaries were less efficient in extracting nonpolar and polar analytes.     

Sol-gel microextraction phases for sample preconcentration in chromatographic analysis

Sol-gel technology provides a simple and reliable method for solid-phase microextraction (SPME) fiber preparation through in situ creation of surface-bonded organic-inorganic hybrid coatings characterized by enhanced thermal stability and solvent-resistance properties that are important for the coupling of SPME with GC and HPLC, respectively. The sol-gel coating technology has led to the development of an extensive array of sol-gel sorbent coatings for SPME. In this article, sol-gel microextraction coatings are reviewed, with particular attention on their synthesis, characterization, and applications in conjunction with GC and HPLC analyses. In addition, the development of sol-gel-coated stir bars, their inherent advantages, and applications are discussed. Next, the development and applications of sol-gel capillary microextraction (CME) in hyphenation with GC and HPLC is extensively reviewed. The newly emerging germania- and titania-based sol-gel microextraction phases look promising, especially in terms of pH and hot solvent stability. Finally, sol-gel monolithic beds for CME are reviewed. Such monolithic beds are in a position to greatly improve the extracting capabilities and enhanced sensitivity in CME.     

Sol-gel-coated oligomers as novel stationary phases for solid-phase microextraction

Amphiphilic and hydrophilic oligomers were synthesized and coated on fused silica capillaries using a sol-gel technique. Sol-gel-coated capillaries were evaluated for the solid-phase microextraction and preconcentration of a wide variety of non-polar and polar analytes. Both types of coatings were stable under high temperature (up to 280 degrees C). The extraction efficiency of the sol-gel coatings was evaluated for the extraction of both non-polar and polar analytes, including organochlorine pesticides, triazine herbicides, estrogens and alkylphenols (APs) and bisphenol-A (BPA). Compared with commercially available solid-phase microextraction (SPME) adsorbents such as poly(dimethylsiloxane)divenylbenzene and polyacrylate, the new materials showed comparable selectivity and sensitivity towards both non-polar and polar analytes. The new coatings gave good linearity and detection limits. For example with triazines, a detection limit of <0.005 microl l(-1), precision from 5.0 to 11.0% (n = 6) and linearity of the calibration plots (0.5 to 50 microl l(-1)) were obtained. The sol-gel coated SPME capillaries were used for the determination of triazine herbicides in reservoir water samples collected in Singapore.     

Solvent-resistant sol-gel polydimethyldiphenylsiloxane coating for on-line hyphenation of capillary microextraction with high-performance liquid chromatography

A sol-gel polydimethyldiphenylsiloxane (PDMDPS) coating was developed for capillary microextraction on-line hyphenated with high-performance liquid chromatography (HPLC). This coating was created using methyltrimethoxysilane (MTMS) as the sol-gel precursor and di-hydroxy-terminated PDMDPS as the sol-gel active polymer. The methyl and phenyl groups on the sol-gel active polymer and the methyl groups on the sol-gel precursor ultimately turned into pendant groups providing the ability to extract non-polar analytes. A 40-cm segment of 0.25mm I.D. fused silica capillary containing the sol-gel PDMDPS coating was installed as an external sampling loop in an HPLC injection port. Aqueous samples containing polycyclic aromatic hydrocarbons (PAHs), aromatic compounds, ketones, and aldehydes were passed through this capillary wherein the analytes were extracted by the sol-gel coating. The extracted analytes were then transferred to the HPLC column using isocratic or gradient elution with an acetonitrile/water mobile phase. This capillary demonstrated excellent extraction capability for non-polar (e.g., polycyclic aromatic hydrocarbons and aromatic compounds) as well as moderately polar compounds, such as aromatic amines, ketones, and aldehydes. The test results indicate that PDMDPS can be successfully immobilized into a sol-gel network and that the resulting solvent-resistant sol-gel organic-inorganic hybrid coating can be effectively used for on-line hyphenation of capillary microextraction with high-performance liquid chromatography. The test results also indicate that the sol-gel PDMDPS coated capillary is resistant to high-temperature solvents, making it suitable for applications in high-temperature HPLC. To the best of our knowledge, this is the first report on the creation of a silica-based sol-gel PDMDPS coating used in capillary microextraction on-line hyphenated to HPLC.     

MPTS-silica coated capillary microextraction on line hyphenated with inductively coupled plasma atomic emission spectrometry for the determination of Cu, Hg and Pb in biological samples

A novel sol-gel 3-mercaptopropyltrimethoxysilane (MPTS) modified silica coating was developed for capillary microextraction (CME) of trace Cu, Hg and Pb prior to their on line determination by inductively coupled plasma-atomic emission spectrometry (ICP-AES). This organic-inorganic hybrid coating was in situ created on the inner walls of fused silica capillary using a sol solution containing TMOS (tetramethoxysilane) as a precursor, MPTS as a co-precursor, ethanol as the solvent and hydrochloric acid as a catalyst. The structure of the capillary coating was characterized by FT-IR spectroscopy, Raman spectroscopy, SEM and TEM. The factors affecting on the capillary microextraction of analytes such as pH, sample flow rate and volume, elution solution and interfering ions had been investigated, and the optimized experimental parameters were obtained. Under the optimized conditions, the absorption capacity of MPTS-silica coated capillary was found to be 1.17, 1.96 and 1.19 μg m⁻¹ for Cu, Hg and Pb, and the limits of detection were as low as 0.17 0.22 and 0.52 ng mL⁻¹, respectively. With a sampling frequency of 12 h⁻¹, the relative standard deviations (R.S.D.s) were 4.2, 2.6 and 3.8% (C=4 ng mL⁻¹, n = 7, sample volume = 1 mL) for Cu, Hg and Pb, respectively. The proposed method had been successfully applied to the determination of Cu, Hg and Pb in human urine, human serum and preserved egg. To validate the proposed method, certified reference materials of BCR151 milk powder, GBW07601 (GSH-1) human hair, GSBZ 50016-90 and GSB 07-1183-2000 water samples were analyzed and the determined values were in a good agreement with the certified values.     

8-羟基喹啉动态有序介孔SiO_2涂层毛细管微萃取与ICP-MS在线联用分析天然水中铝的形态

本文采用溶胶-凝胶方法合成SiO_2溶胶,制备了8-羟基喹啉改性的有序介孔SiO_2涂层毛细管,建立了毛细管微萃取-电感耦合等离子体质谱(CME-ICP-MS)在线联用技术分析铝形态的新方法.选择游离态铝和Al-柠檬酸络合物为不同铝形态的代表物,详细探讨了不同实验参数对铝形态分离的影响.结果表明:8-羟基喹啉改性的有序介孔SiO_2涂层毛细管在pH为5.0～8.0的范围内可以有效地分离试样中的稳定态单核铝(柠檬酸铝)和非稳定态无机单核铝(游离态铝).方法的富集倍数为10,检出限为0.34 ng·mL~(-1).该法应用于湖水、池塘水和长江水中铝的组形态分析,所得结果与8-羟基喹啉负载硅胶微柱分离所得结果吻合很好.     

Surfactant-Assisted Ethane-Bridged Silica Coating for Capillary Electrochromatography

With surfactant P123 as structure directing reagent, 1, 2-bis (trimethoxysilyl) ethane was hydrolyzed under acid condition. The resulting ethane-bridged silica was coated onto the inner walls of fused silica capillaries and used as the stationary phase for capillary electrochromatography. The bridged ethyl silica provided hydrophobic groups for reversed-phase separation. A comparative coated capillary was fabricated without the use of surfactant in the preparation of the bonded silica. Separation of model neutral compounds was compared between these two kinds of capillaries. Surfactant-assisted organosilica-coated capillaries displayed much superior retention efficiency without obviously decreased electroosmotic flow. The existence of surfactant in the synthesis of the sol results in higher surface areas of the coating. Such ethane-bridged organosilica stationary phases can be used under basic conditions.     

Ionic liquid-mediated bis[(3-methyldimethoxysilyl)propyl] polypropylene oxide-based polar sol–gel coatings for capillary microextraction

Two ionic liquids (IL), namely, 1-methyl-3-octylimidazolium chloride (MOIC) and trihexyltetradecylphosphonium tetrafluoroborate (TTPT) were used to prepare polar and nonpolar sol–gel coatings for capillary microextraction (CME). Bis[(3-methyldimethoxysilyl)propyl] polypropylene oxide (BMPO), containing sol–gel active terminal methoxysilyl groups and polar propylene oxide repeating units, was used to prepare polar sol–gel hybrid organic–inorganic coatings. Hydroxy-terminated poly(dimethyl-co-diphenylsiloxane) was used as the sol–gel active organic component for nonpolar sol–gel hybrid coatings. Compared to a sol–gel BMPO coating prepared without IL, the sol–gel BMPO coatings prepared with the use of both of these ILs provided more efficient extraction as is evidenced by more pronounced GC peak areas. The MOIC-mediated sol–gel BMPO coating provided larger GC peak areas compared to the TTPT-mediated sol–gel BMPO coating. Scanning electron microscopy results suggested that MOIC provided a more porous morphology of the sol–gel BMPO extraction media compared to that prepared with TTPT. Thus, individual ILs can affect the porosity of sol–gel materials to different degrees. Overall, the sol–gel BMPO coating prepared with the ILs could extract nonpolar to polar analytes directly from aqueous samples. Detection limits were on the order of nanograms per liter (1.9–330.5 ng/L) depending on the analyte class. Furthermore, the MOIC-mediated sol–gel BMPO coating demonstrated high thermal stability (330 °C), solvent resistance, and fast extraction equilibrium (10–15 min) for polar and moderately polar analytes.     

A novel capillary microextraction on ordered mesoporous titania coating combined with electrothermal vaporization inductively coupled plasma mass spectrometry for the determination of V, Cr and Cu in environmental and biological samples

In this work, an ordered mesoporous titania film was introduced to coat a capillary by means of sol-gel technique. Sol-gel titania coating was developed for the preconcentration/separation of trace V, Cr and Cu by capillary microextraction (CME), and the adsorbed analytes were eluted for electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS) detection. By immobilizing sol-gel titania on the inner surface of a fused-silica microextraction capillary, the sol-gel titania coating was prepared easily. Its adsorption properties, stability and the factors affecting the adsorption behaviors of V, Cr and Cu were investigated in detail. At pH range of 7 to 9, the titania-coated capillary (50 cm x 0.25 mm) is selective towards V, Cr and Cu, and the target analytes could be desorbed quantitatively with 50 microl of 1.0 mol l(-1) HNO3 at the rate of 0.05 ml min(-1). With a consumption of 2 ml sample solution, an enrichment factor of 33.3, and a detection limit (3 s) of 1.1 pg ml(-1) (10.5 fg) for V; 3.3 pg ml(-1) (33.0 fg) for Cr and 6.3 pg ml(-1) (63.1 fg) for Cu respectively were obtained. The precisions Relative Standard Deviations (RSDs) for nine replicate measurements of 1 ng ml(-1) V, Cr and Cu were 3.4, 5.1 and 6.4%, respectively. The proposed method has been applied to the determination of V, Cr and Cu in human urine and lake water, and the recoveries for these elements were 89.2 approximately 105%. The developed method was also applied to the determination of the target elements in NIES No. 10-a (rice flour-unpolished) and NIES No. 9 (sargasso) certified reference materials, and the results found are in good agreement with the certified values.     

Preparation and characteristics of sol-gel-coated calix[4]arene fiber for solid-phase microextraction

5,11,17,23-Tetra-tert-butyl-25,27-diethoxy-26,28-dihydroxycalix[4]arene/hydroxy-terminated silicone oil coated fiber was first prepared and applied for solid-phase microextraction (SPME) with sol-gel technology. The possible sol-gel mechanism was discussed and confirmed by IR spectra. It showed wonderful selectivity and sensitivity to polar (aromatic amines), nonpolar (benzene derivatives, polycyclic aromatic hydrocarbons) and high boiling point compounds (phthalates) and the extraction equilibria were reached quite fast. The coating has high thermal stability (380 degrees C) and solvent stability (organic and inorganic), thus its lifetime is longer than conventional fibers. In addition, it has surprising fiber-to-fiber and batch-to-batch reproducibility. The detection limits were quite low and the linear ranges were pretty broad for all analytes.     

Negatively charged sol-gel column with stable electroosmotic flow for online preconcentration of zwitterionic biomolecules in capillary electromigration separations

A negatively charged sol-gel coating was developed for on-line preconcentration of zwitterionic biomolecules in capillary electrophoresis (CE), using asparagine and myoglobin as representative zwitterionic bioanalytes. The sol-gel coating was created by using a solution containing three precursors: mercaptopropyltrimethoxysilane (MPTMS), tetramethoxysilane (TMOS), and n-octadecyltriethoxysilane (C18-TEOS). The resulting sol-gel coating contained chemically bonded mercaptopropyl functional groups that were further oxidized by hydrogen peroxide to the corresponding sulfonic acid moieties. Such a surface-bonded sol-gel coating can carry a negative charge over a wide range of pH due to the presence of deprotonated sulfonic acid groups. Under favorable pH conditions, the negatively charged sol-gel coating can facilitate the extraction of positively charged analytes from a zwitterionic sample through electrostatic interaction. This principle was employed to extract myoglobin and asparagine by passing aqueous samples of these zwitterionic analytes through a negatively charged sol-gel column. The extracted analytes were then desorbed and focused via local pH change and stacking. The local pH change was accomplished by passing a buffer solution with a pH above the solute p/ value, while a dynamic pH junction between the sample solution and the background electrolyte was utilized to facilitate solute focusing. The sorption/desorption phenomena could, perhaps, also be explained on the basis of ion-exchange and local pH junction effects. On-line preconcentration and analysis results obtained on sulfonated sol-gel columns were compared with those obtained on an uncoated fused silica capillary of identical dimensions using conventional sample injections. Using UV detection, the presented sample preconcentration technique provided a sensitivity enhancement factor (SEF) on the order of 3 x 10(3) for myoglobin, and 7 x 10(3) for asparagine.     

Facile preparation of polysaccharide‐coated capillaries using a room temperature ionic liquid for chiral separations

In this study, the dissolution of polysaccharides into an ionic liquid was investigated and applied as a coating onto the capillary walls of a fused‐silica capillary in open‐tubular CEC. The coating was evaluated by examining the chiral separation of two analytes (thiopental, sotalol) with three cellulose derivatives (cellulose acetate, cellulose acetate phthalate, and cellulose acetate butyrate). Baseline separation of thiopental enantiomers was achieved by use of each polysaccharide coating (Rs: 7.0, 8.1, 7.1), while sotalol provided partial resolution (Rs: 0.7, 1.0, 0.9). In addition, reproducibility of the cellulose‐coated capillaries was evaluated by estimating the run‐to‐run and capillary‐to‐capillary RSD values of the EOF. Both stability and reproducibility were very good with RSD values of less than 7%.     

Highly porous solid-phase microextraction fiber coating based on poly(ethylene glycol)-modified ormosils synthesized by sol-gel technology

The preparation and characteristics of solid-phase microextraction (SPME) fibers coated with Carbowax 20M ormosil (organically modified silica) are described here. Raw fused silica fibers were coated with Carbowax 20M-modified silica using sol-gel process. Scanning electron micrographs of fibers revealed a highly porous, sponge-like coating with an average thickness of (8 +/- 1) microm. The sol-gel Carbowax fibers were compared to commercial fibers coated with 100 microm polydimethylsiloxane (PDMS) and 65 microm Carbowax-divinylbenzene (DVB). Shorter equilibrium times were possible with the sol-gel Carbowax fiber: for headspace extraction of the test analytes, they ranged from less than 3 min for benzene to 15 min for o-xylene. Extraction efficiencies of the sol-gel Carbowax fiber were superior to those of conventional fibers: for o-xylene, the extracted masses were 230 and 540% of that obtained with 100 microm PDMS and 65 microm Carbowax-DVB fibers, respectively.     

Polydopamine as an adhesive coating for open tubular capillary electrochromatography

Polydopamine (PolyD) coating was used as an adhesive layer in the preparation of biological stationary phases for open tubular capillary electrochromatography (OT-CEC). The influence of coating solution freshness, coating time, temperature and dopamine hydrochloride concentration on the PolyD layer formation was studied. The performance of the polyD coating was monitored by measuring the electro-osmotic flow in coated capillaries. Following polyD coating of the capillary, secondary layer material (e.g. cell membrane solutions, phospholipid mixtures or mitochondria) was inserted into the capillary for at least 1?h. The performance of these double-coated capillaries (a polyD layer+a biological material layer) was compared with capillaries containing the respective biological material directly attached to the capillary wall. The study reveals that the presence of polyD layer in fused silica capillaries improves the performance of lipid and membrane fragment coatings in capillaries. At the same time, the thickness of the polyD layer does not have marked impact on the secondary coatings. Analysis with test analytes demonstrated that double-coated capillaries can be applied to study membrane-drug interactions.     

三苄基杯[6]芳烃固相微萃取复合涂层的研制及其应用

采用溶胶-凝胶方法制备了三苄基杯[6]芳烃/羟基硅油(C[6]/OH-TSO)固相微萃取(SPME)探头, 通过对多环芳烃和酞酸酯(PAEs)的分析考察了新型C[6]/OH-TSO探头的性能. 结果表明: 杯[6]芳烃SPME探头对这些非极性和弱极性的芳香化合物有很好的萃取效果和选择性, 具有耐高温、使用寿命长等特点. 建立了SPME与气相色谱-氢火焰(GC-FID)联用测定化妆品中PAEs的方法. 该方法检测限低, 重现性好(RSD＜9%), 线性范围宽(2～3个数量级). 回收率在83.42%～98.85%之间.