Acoustically excited air-assisted liquid sheets

The effect of acoustic excitation on the disintegration characteristics of air-assisted liquid sheets, which utilize water at ambient temperature, and for velocities up to 1.8 m/s, is investigated. The study using high-speed imaging techniques revealed that optimum frequency modulation of the perturbation generator has a pronounced influence on the associated surface waves and the subsequent breakup of the liquid sheet. The analysis includes characterization of critical wave amplitude, breakup length, and breakup frequency, for Weber numbers in the range 0.30<We_abs<0.44, which are compared with flow features in the absence of acoustic excitation. The results show that acoustic perturbation can effectively suppress the dominance of gravitational and surface tension effects. As a consequence, for low Weber number flows, the interfacial waves exhibit regularity, and thus a better control of primary breakup processes of liquid sheet may be accomplished.     

Formation of radially expanding liquid sheet by impinging two round jets

A thin circular liquid sheet can be formed by impinging two identical round jets against each other. The liquid sheet expands to a certain critical radial distance and breaks. The unsteady process of the formation and breakup of the liquid sheet in the ambient gas is simulated numerically. Both liquid and gas are treated as incompressible Newtonian fluids. The flow considered is axisymmetric. The liquid-gas interface is modeled with a level set function. A finite difference scheme is used to solve the governing Navier-Stokes equations with physical boundary conditions. The numerical results show how a thin circular sheet can be formed and break at its circular edge in slow motion. The sheet continues to thin as it expands radially. Hence, the Weber number decreases radially. The Weber number is defined as ρu 2 h/σ, where ρ and σ are, respectively, the liquid density and the surface tension, and u and h are, respectively, the average velocity and the half sheet thickness at a local radial location in the liquid sheet. The numerical results show that the sheet indeed terminates at a radial location, where the Weber number reaches one as observed in experiments. The spatio-temporal linear theory predicts that the breakup is initiated by the sinuous mode at the critical Weber number We c =1, below which the absolute instability occurs. The other independent mode called the varicose mode grows more slowly than the sinuous mode according to the linear theory. However, our numerical results show that the varicose mode actually overtakes the sinuous mode during the nonlinear evolution, and is responsible for the final breakup. The linear theory predicts the nature of disturbance waves correctly only at the onset of the instability, but cannot predict the exact consequence of the instability.     

Instability of a planar liquid sheet with surrounding fluids between two parallel walls

We investigate the linear and nonlinear instability of a planar liquid sheet with surrounding fluids between two parallel plane solid walls. Linear analysis shows that the maximum temporal growth rate and unstable wave number region of disturbances increase for the dilational and sinuous modes when the gap between the sheet and the wall decreases. The walls have more influence on the instability when the density ratio of the surrounding fluid to the sheet and/or the Weber number decrease. On the other hand, nonlinear analysis is performed by means of the discrete vortex method, where double vortex rows and their mirror images are placed so as to satisfy the boundary condition on the walls. Numerical results show that the walls enhance nonlinearity, which causes deformation and distortion of the sheet, whereas the nonlinearity diminishes linear growth rates except for long dilational disturbances. In particular, as the walls are placed more closely to the sheet, local sheet thinning becomes more pronounced in the long dilational mode, while the dilational mode is more strongly induced from the sinuous mode through monotonic or periodic energy exchanges between the two modes.     

Simple and efficient numerical methods for vortex sheet motion with surface tension

We present two simple and efficient explicit methods for the vortex sheet with surface tension. The first one is the standard point vortex method, which has been known to be unstable in the presence of surface tension, due to spurious growth of waves of high modes. We show, for the first time, that the standard point vortex method is able to calculate the vortex sheet motion with surface tension by employing a Fourier filtering. The second method is a modification of the Pullin method using central differences for numerical differentiations. This method is more convenient to implement than other spectral methods and is free from the aliasing instability. We give a linear stability analysis for the numerical methods and show results for the long‐time evolution of the vortex sheet. We also propose a new redistribution procedure to control point clustering, by setting limits of minimum and maximum distances between neighboring points. This procedure is found to be very efficient for long‐time computations of the explicit methods. Copyright © 2013 John Wiley & Sons, Ltd.     

Liquid jet in a high Mach number air stream

The instability of circular liquid jet immersed in a coflowing high velocity air stream is studied assuming that the flow of the viscous gas and liquid is irrotational. The basic velocity profiles are uniform and different. The instabilities are driven by Kelvin–Helmholtz instability due to a velocity difference and neckdown due to capillary instability. Capillary instabilities dominate for large Weber numbers. Kelvin–Helmholtz instability dominates for small Weber numbers. The wavelength for the most unstable wave decreases strongly with the Mach number and attains a very small minimum when the Mach number is somewhat larger than one. The peak growth rates are attained for axisymmetric disturbances (n = 0) when the viscosity of the liquid is not too large. The peak growth rates for the first asymmetric mode (n = 1) and the associated wavelength are very close to the n = 0 mode; the peak growth rate for n = 1 modes exceeds n = 0 when the viscosity of the liquid jet is large. The effects of viscosity on the irrotational instabilities are very strong. The analysis predicts that breakup fragments of liquids in high speed air streams may be exceedingly small, especially in the transonic range of Mach numbers.     

Flow visualization of supersonic laminar flow over a backward-facing step via NPLS

An experimental study on a supersonic laminar flow over a backward-facing step of 5 mm height was undertaken in a low-noise indraft wind tunnel. To investigate the fine structures of Ma = 3.0 and 3.8 laminar flow over a backward-facing step, nanotracer planar laser scattering was adopted for flow visualization. Flow structures, including supersonic laminar boundary layer, separation, reattachment, redeveloping turbulent boundary layer, expansion wave fan and reattachment shock, were revealed in the transient flow fields. In the Ma = 3.0 BFS (backward-facing step) flow, by measuring four typical regions, it could be found that the emergence of weak shock waves was related to the K–H (Kelvin–Helmholtz) vortex which appeared in the free shear layer and that the convergence of these waves into a reattachment shock was distinct. Based on large numbers of measurements, the structure of time-averaging flow field could be gained. Reattachment occurred at the location downstream from the step, about 7–7.5 h distance. After reattachment, the recovery boundary layer developed into turbulence quickly and its thickness increased at an angle of 4.6°. At the location of X = 14h, the redeveloping boundary layer was about ten times thicker than its original thickness, but it still had not changed into fully developed turbulence. However, in the Ma = 3.8 flow, the emergence of weak shock waves could be seen seldom, due to the decrease of expansion. The reattachment point was thought to be near X = 15h according to the averaging result. The reattachment shock was not legible, which meant the expansion and compression effects were not intensive.     

POD analysis of a finite-length cylinder near wake

The near wake of a wall-mounted finite-length square cylinder with an aspect ratio of 7 is investigated based on the proper orthogonal decomposition (POD) of the PIV data measured in three spanwise planes, i.e., z/d = 6, 3.5 and 1.0, near the cylinder free end, mid-span and fixed end (wall), respectively. The Reynolds number based on free-stream velocity (U _∞) and cylinder width (d) is 9,300. A two-dimensional (2D) square cylinder wake is also measured and analyzed at the same Reynolds number for the purpose of comparison. The structures of various POD modes show marked differences between the two flows. While the coefficients, a ₁ and a ₂, of the POD modes 1 and 2 occur within an annular area centered at a ₁ = a ₂ = 0 in the 2D wake, their counterparts are scattered all over the entire circular plane at z/d = 1.0 and 3.5 of the finite-length cylinder wake. Flow at z/d = 6 is dominated by POD mode 1, which corresponds to symmetrical vortex shedding and accounts for 54.0 % of the total turbulent kinetic energy (TKE). On the other hand, the POD modes 1 and 2, corresponding to anti-symmetrical vortex shedding, are predominant, accounting for about 45.0 % of the total TKE, at z/d = 3.5 and 1. It has been found that the flow structure may be qualitatively and quantitatively characterized by the POD coefficients. For example, at z/d = 6, a larger a ₁ corresponds to a smaller length of flow reversal zone and a stronger downwash flow. At z/d = 3.5 and 1, two typical flow modes can be identified from a ₁ and a ₂. While large a ₁ and/or a ₂ correspond to anti-symmetrical vortex shedding, as in a 2D cylinder wake, small a ₁ and a ₂ lead to symmetrical vortex shedding. Any values between the large and small a ₁ and/or a ₂ correspond to the flow structure between these two typical flow modes. As such, the probability of occurrence of a flow structure may be determined from the distribution of the POD coefficients.     

Inviscid Models Generalizing the Two-dimensional Euler and the Surface Quasi-geostrophic Equations

Any classical solution of the two-dimensional incompressible Euler equation is global in time. However, it remains an outstanding open problem whether classical solutions of the surface quasi-geostrophic (SQG) equation preserve their regularity for all time. This paper studies solutions of a family of active scalar equations in which each component u _j of the velocity field u is determined by the scalar θ through \({u_j =\mathcal{R}\Lambda^{-1}P(\Lambda) \theta}\) , where \({\mathcal{R}}\) is a Riesz transform and Λ = (?Δ)^1/2. The two-dimensional Euler vorticity equation corresponds to the special case P(Λ) = I while the SQG equation corresponds to the case P(Λ) = Λ. We develop tools to bound \({\|\nabla u||_{L^\infty}}\) for a general class of operators P and establish the global regularity for the Loglog-Euler equation for which P(Λ) = (log(I + log(I ? Δ))) ^γ with 0 ≦ γ ≦ 1. In addition, a regularity criterion for the model corresponding to P(Λ) = Λ ^β with 0 ≦ β ≦ 1 is also obtained.     

Temporal analysis of breakup for a power law liquid jet in a swirling gas

The breakup mechanism and instability of a power law liquid jet are investigated in this study. The power law model is used to account for the non-Newtonian behavior of the liquid fluid. A new theoretical model is established to explain the breakup of a power law liquid jet with axisymmetric and asymmetric disturbances, which moves in a swirling gas. The corresponding dispersion relation is derived by a linear approximation, and it is applicable for both shear-thinning and shear-thickening liquid jets. Analysis results are calculated based on the temporal mode. The analysis includes the effects of the generalized Reynolds number, the Weber number, the power law exponent, and the air swirl strength on the breakup of the jet. Results show that the shear-thickening liquid jet is more unstable than its Newtonian and shear-thinning counterparts when the effect of the air swirl is taken into account. The axisymmetric mode can be the dominant mode on the power law jet breakup when the air swirl strength is strong enough, while the non-axisymmetric mode is the domination on the instability of the power liquid jet with a high We and a low Re _n . It is also found that the air swirl is a stabilizing factor on the breakup of the power law liquid jet. Furthermore, the instability characteristics are different for different power law exponents. The amplitude of the power law liquid jet surface on the temporal mode is also discussed under different air swirl strengths.     

Unsteady characteristics of low-Re flow past two tandem cylinders

This study investigated the two-dimensional flow past two tandem circular or square cylinders at Re = 100 and D / d = 4–10, where D is the center-to-center distance and d is the cylinder diameter. Numerical simulation was performed to comparably study the effect of cylinder geometry and spacing on the aerodynamic characteristics, unsteady flow patterns, time-averaged flow characteristics and flow unsteadiness. We also provided the first global linear stability analysis and sensitivity analysis on the physical problem for the potential application of flow control. The objective of this work is to quantitatively identify the effect of the cylinder geometry and spacing on the characteristic quantities. Numerical results reveal that there is wake flow transition for both geometries depending on the spacing. The characteristic quantities, including the time-averaged and fluctuating streamwise velocity and pressure coefficient, are quite similar to that of the single cylinder case for the upstream cylinder, while an entirely different variation pattern is observed for the downstream cylinder. The global linear stability analysis shows that the spatial structure of perturbation is mainly observed in the wake of the downstream cylinder for small spacing, while moves upstream with reduced size and is also observed after the upstream cylinder for large spacing. The sensitivity analysis reflects that the temporal growth rate of perturbation is the most sensitive to the near-wake flow of downstream cylinder for small spacing and upstream cylinder for large spacing.     

The viscous curtain: General formulation and finite-element solution for the stability of flowing viscous sheets

The stability of thin viscous sheets has been studied so far in the special case where the base flow possesses a direction of invariance: the linear stability is then governed by an ordinary differential equation. We propose a mathematical formulation and a numerical method of solution that are applicable to the linear stability analysis of viscous sheets possessing no particular symmetry. The linear stability problem is formulated as a non-Hermitian eigenvalue problem in a 2D domain and is solved numerically using the finite-element method. Specifically, we consider the case of a viscous sheet in an open flow, which falls in a bath of fluid; the sheet is mildly stretched by gravity and the flow can become unstable by ‘curtain’ modes. The growth rates of these modes are calculated as a function of the fluid parameters and of the geometry, and a phase diagram is obtained. A transition is reported between a buckling mode (static bifurcation) and an oscillatory mode (Hopf bifurcation). The effect of surface tension is discussed.     

Absolute and convective instability of a liquid sheet with transverse temperature gradient

The spatial–temporal instability behavior of a viscous liquid sheet with temperature difference between the two surfaces was investigated theoretically. The practical situation motivating this investigation is liquid sheet heated by ambient gas, usually encountered in industrial heat transfer and liquid propellant rocket engines. The existing dispersion relation was used, to explore the spatial–temporal instability of viscous liquid sheets with a nonuniform temperature profile, by setting both the wave number and frequency complex. A parametric study was performed in both sinuous and varicose modes to test the influence of dimensionless numbers on the transition between absolute and convective instability of the flow. For a small value of liquid Weber number, or a great value of gas-to-liquid density ratio, the flow was found to be absolutely unstable. The absolute instability was enhanced by increasing the liquid viscosity. It was found that variation of the Marangoni number hardly influenced the absolute instability of the sinuous mode of oscillations; however it slightly affected the absolute instability in the varicose mode.     

Effect of Flow Structures on Turbulence Statistics of Taylor-Couette Flow in the Torque Transition State

Direct numerical simulations of Taylor-Couette flow from Re= 8000 to 25000 have been conducted to investigate changes of turbulence statistics in the transition of the Reynolds number dependency of the mean torque near Re= 10000. The velocity fluctuations are decomposed into the contributions of the Taylor vortex and remaining turbulent fluctuations. Significant Reynolds number dependencies of these components are observed in the radial profiles of the Reynolds stress and the transmission of the mean torque. The contributions of Taylor vortex and turbulent components in the net amount of mean torque are evaluated. The Taylor vortex component is overtaken by the turbulent counterpart around Re= 15000 when they are defined as the azimuthally averaged component and the remnants. The results show that the torque transition can be explained by the competition between the contributions of azimuthally averaged Taylor vortex and the remaining turbulent components.     

Numerical study on evolution of subharmonic varicose low-speed streaks in turbulent channel flow

The evolution of two spanwise-aligned low-speed streaks in a wall turbulent flow, triggered by the instability of the subharmonic varicose (SV) mode, is studied by a direct numerical simulation (DNS) method in a small spatial-periodic channel. The results show that the SV low-speed streaks are self-sustained at the early stage, and then transform into subharmonic sinuous (SS) low-speed streaks. Initially, the streamwise vortex sheets are formed by shearing, and then evolve into zigzag vortex sheets due to the mutual induction. As the intensification of the SV low-speed streaks becomes prominent, the tilted streamwise vortex tubes and the V-like streamwise vortex tubes can be formed simultaneously by increasing \( + \frac{{\partial u}}{{\partial x}}\). When the SV low-speed streaks break down, new zigzag streamwise vortices will be generated, thus giving birth to the next sustaining cycle of the SV low-speed streaks. When the second breakdown happens, new secondary V-like streamwise vortices instead of zigzag streamwise vortices will be generated. Because of the sweep motion of the fluid induced by the secondary V-like streamwise vortices, each decayed low-speed streak can be divided into two parts, and each part combines with the part of another streak, finally leading to the formation of SS low-speed streaks.     

Linearized Stability for Semiflows Generated by a Class of Neutral Equations,with Applications to State-Dependent Delays

We prove a principle of linearized stability for semiflows generated by neutral functional differential equations of the form x′(t) = g(? x _t , x _t ). The state space is a closed subset in a manifold of C ²-functions. Applications include equations with state-dependent delay, as for example x′(t) = a x′(t + d(x(t))) + f (x(t + r(x(t)))) with \({a\in\mathbb{R}, d:\mathbb{R}\to(-h,0), f:\mathbb{R}\to\mathbb{R}, r:\mathbb{R}\to[-h,0]}\).     

A combined necking and shear localization analysis for aluminum sheets under biaxial stretching conditions

A combined necking and shear localization analysis is adopted to model the failures of two aluminum sheets, AA5754 and AA6111, under biaxial stretching conditions. The approach is based on the assumption that the reduction of thickness or the necking mode is modeled by a plane stress formulation and the final failure mode of shear localization is modeled by a generalized plane strain formulation. The sheet material is modeled by an elastic-viscoplastic constitutive relation that accounts for the potential surface curvature, material plastic anisotropy, material rate sensitivity, and the softening due to the nucleation, growth, and coalescence of microvoids. Specifically, the necking/shear failure of the aluminum sheets is modeled under uniaxial tension, plane strain tension and equal biaxial tension. The results based on the mechanics model presented in this paper are in agreement with those based on the forming limit diagrams (FLDs) and tensile tests. When the necking mode is suppressed, the failure strains are also determined under plane strain conditions. These failure strains can be used as guidances for estimation of the surface failure strains on the stretching sides of the aluminum sheets under plane strain bending conditions. The estimated surface failure strains are higher than the failure strains of the forming limit diagrams under plane strain stretching conditions. The results are consistent with experimental observations where the surface failure strains of the aluminum sheets increase significantly on the stretching sides of the sheets under bending conditions. The results also indicate that when a considerable amount of necking is observed for a sheet metal under stretching conditions, the surface failure strains on the stretching sides of the sheet metal under bending conditions can be significantly higher.     

Mechanical Properties of Hard W-C Coating on Steel Substrate Deduced from Nanoindentation and Finite Element Modeling

Mechanical properties of a hard and stiff W-C coating on steel substrate have been investigated using nanoindentation combined with finite element modeling (FEM) and extended FEM (XFEM). The significant pile-up observed around the indents in steel substrate caused an overestimation of hardness and indentation modulus. A simple geometrical model, considering the additional contact surfaces due to pile-up, has been proposed to reduce this overestimation. The presence of W-C coating suppressed the pile-up in the steel substrate and a transition to sink-in behavior occurred. The FEM simulations adequately reproduced the surface topography of the indents in the substrate and coating/substrate systems as well. The maximum principal stresses of the indented W-C/steel coated system were tensile; they were always located in the coating and evolved in 3 stages. Cohesive cracking occurred during loading in the sink-in zone (stage III) when the ultimate tensile strength (σ _max ) of the coating was reached. The obtained hardness (H _c ), indentation modulus (E _c ), yield stress (Y) and strength (σ _max ) of the W-C coating were H _c ? =?20 GPa, E _c ? =?250 GPa, Y?=?9.0 GPa and σ _max ? =?9.35 GPa, respectively. XFEM resulted in fracture energy of the W-C coating of G?=?38.1 J?·?m^-2 and fracture toughness of K _IC ? =?3.5 MPa?·?m^0.5.     

Helical Structures in the Near Field of a Turbulent Pipe Jet

We perform a finely resolved Large-eddy simulation to study coherent vortical structures populating the initial (near-nozzle) zone of a pipe jet at the Reynolds number of 5300. In contrast to ‘top-hat’ jets featured by Kelvin-Helmholtz rings with the non-dimensional frequency S t≈0.3?0.6, no high-frequency dominant mode is observed in the near field of a jet issuing from a fully-developed pipe flow. Instead, in shear layers we observe a relatively wide peak in the power spectrum within the low-frequency range (S t≈0.14) corresponding to the propagating helical waves entering with the pipe flow. This is confirmed by the Fourier transform with respect to the azimuthal angle and the Proper Orthogonal Decomposition complemented with the linear stability analysis revealing that this low-frequency motion is not connected to the Kelvin-Helmholtz instability. We demonstrate that the azimuthal wavenumbers m=1?5 contain the most of the turbulent kinetic energy and that a common form of an eigenmode is a helical vortex rotating around the axis of symmetry. Small and large timescales are identified corresponding to “fast” and “slow” rotating modes. While the “fast” modes correspond to background turbulence and stochastically switch from co- to counter-rotation, the “slow” modes are due to coherent helical structures which are long-lived and have low angular velocities, in agreement with the previously described spectral peak at low S t.     

Flow structure and heat transfer of impingement jet

This paper presents the characteristics of flow behavior and thermal fields of both free and impingement jets issued from circular orifice nozzle at Re = 9,700. The flow behavior of a single round jet and impingement jet were observed by smoke flow visualization recorded by a high speed video camera with 5,000 frames per second. Heat transfer coefficient on the impingement surface was calculated varying the Reynolds number and the separation distance between nozzle exit and plate. Time-series analysis was applied to the visualization image to get the information of time variation of flow behavior. Probability distribution of vortex scale induced by the jet at discrete positions was investigated. Experimental results show that the potential core is not a continuous phenomenon with time and the frequency of vortex ring formation have similar features regardless of whether the impingement plate was set on or not, furthermore the time-series analysis with flow visualization images makes clear the detailed flow behavior.     

Families of rational solutions of the <Emphasis Type="Italic">y</Emphasis>-nonlocal Davey–Stewartson II equation

The y-nonlocal Davey–Stewartson II equation is an extension of the usual DS II equation involving a partially parity-time-symmetric potential only with respect to the spatial variable y. By using the Hirota bilinear method, families of n-order rational solutions are obtained, which include lumps in the (x, y)-plane and the (y, t)-plane, growing-and-decaying line waves in the (x, t)-plane, and hybrid solutions of interacting line rogue waves and lumps in the (x, y)-plane.