Trace molecules detectable by surface-enhanced Raman scattering based on newly developed Ag and Au nanoparticles-containing substrates

In this work, Ag and Au nanoparticles-containing substrates were first developed for obtaining a stronger surface-enhanced Raman scattering (SERS) intensity of Rhodamine 6G (R6G) and reducing the limit of detection (LOD) of trace molecules. First, the optimum electrochemically roughening conditions employed on Ag substrates for obtaining strongest SERS of R6G were investigated. Then the optimally roughened Ag substrates were incubated in the prepared Cl- and Au-containing solutions for different couples of minutes to undergo the galvanic replacement reactions. Encouragingly, the SERS of R6G adsorbed on this roughened Ag substrate modified by the replacement of Ag with Au for 5 min exhibits a higher intensity by 8-fold of magnitude, as compared with the SERS of R6G adsorbed on an unmodified roughened Ag substrate. Moreover, the practical LOD of R6G can be reduced by one order of magnitude from 1 ppq to 0.1 ppq. Further investigations indicate that the compositions of complexes formed on the substrates demonstrate decided effects on the improved SERS.     

Synthesis of Tetrasubstituted Alkenes through a Palladium‐Catalyzed Domino Carbopalladation/C?H‐Activation Reaction

Helical tetrasubstituted alkenes ( 7 ) were obtained in a highly efficient way through a palladium‐catalyzed domino‐carbopalladation/CH‐activation reaction of propargylic alcohols 6 in good to excellent yields. Electron‐withdrawing‐ and electron‐donating substituents can be introduced onto the upper and lower aromatic rings. The substrates ( 6 ) for the domino process were synthesized by addition of the lithiated alkyne ( 20 ) to various aldehydes ( 19 ); moreover, the substrates were accessible enantioselectively (in 95 % ee) by reduction of the corresponding ketone using the Noyori procedure.     

DNA-network-templated self-assembly of silver nanoparticles and their application in surface-enhanced Raman scattering

A large-scale lambda-DNA network on a mica surface was successfully fabricated with a simple method. Silver nanoparticles capped with the cationic surfactant cetyltrimethylammonium bromide (CTAB) were self-assembled onto a two-dimensional DNA network template by electrostatic interaction and formed nanoporous silver films, which can be used as active surface-enhanced raman scattering (SERS) substrates. Two probe molecules, Rhodamine 6G (R6G) and 4-aminothiophenol (4-ATP), were studied on these substrates with very low concentrations, and great enhancement factors for R6G (0.21 x 10(10)-4.09 x 10(11)) and 4-ATP (approximately 1.70 x 10(5)) were observed. It was found that the enhancement ability was affected by the DNA concentration and the electrostatic absorption time of the CTAB-stabilized silver nanoparticles on the DNA strands. These SERS substrates formed by the self-assembly of silver nanoparticles on DNA network also show good stability and reproducibility in our experiments.     

Coating and water permeation properties of SiO2 thin films prepared by the sol-gel method on nylon-6 substrates

Nylon-6 substrates were coated with SiO₂ thin films by the sol-gel method and their water permeability coefficient was evaluated. Methyltriethoxysilane (MTES) and tetraethoxysilane (TEOS) were used as starting materials. The addition of MTES to TEOS has enabled the formation of crack-free thin films on the substrates. The thin films strongly adhered to the substrates. The water permeability coefficients of nylon-6 substrates coated with these thin films decreased with the increase in the ratio of TEOS to the total alkoxides. The pretreatment of the nylon-6 substrates with -aminopropyltriethoxysilane was found to be effective to suppress the water permeability. The water permeability was suppressed by about 40% under the optimal condition.     

Improved surface-enhanced Raman scattering on electrochemically roughened silver substrates prepared in bielectrolyte solutions

In this work, the effect of supplemental LiClO₄ electrolytes in KCl solutions used in roughening silver substrates by electrochemical triangular-wave oxidation-reduction cycles (ORC) on surface-enhanced Raman scattering (SERS) was first investigated. To prepare SERS-active substrates by ORC procedures, electrolytes of KCl were generally employed. In contrast, LiClO₄ ones were unsuitable for producing SERS-active substrates. Encouragingly, SERS of Rhodamine 6G (R6G) adsorbed on the roughened Ag substrate prepared in an aqueous solution containing KCl and LiClO₄ electrolytes exhibits a higher intensity by one order of magnitude, as compared with that of R6G adsorbed on a roughened Ag substrate prepared in a solution only containing KCl. Further investigations indicate that the oxidation state of Cl on the roughened Ag substrate demonstrates decided effects on this improved SERS.     

Comparative study of some synthesised and commercial fluorogenic substrates for horseradish peroxidase and its mimetic enzyme hemin by a flow injection method

Four 3,4-dihydroquinoxalin-2(1H)-one derivatives, i.e., 3,4-dihydroquinoxalin-2(lH)-one (DHQ), 3-methyl-3,4-dihydroquinoxalin-2(1H)-one (MDHQ), 3,4-dihydroquinoxalin-2(1H)-one-6-acid (DHQ-6-A) and 3-methyl-3,4-dihydroquinoxalin-2(1H)-one-6-acid (MDHQ-6-A), and N,N′-dicyanomethyl-o-phenylenediamine (DCM-OPA) were synthesised as potential substrates for horseradish peroxidase (HRP). Of these compounds DCM-OPA, DHQ and MDHQ can be prepared by very simple methods in a pure form in large quantities. Their properties for use as fluorogenic substrates for HRP and its mimetic enzyme hemin were compared with commercially available substrates, i.e., p-hydroxyphenylacetic acid (p-HPA), p-hydroxyphenylpropionic acid (p-HPPA), homovanillic acid (HVA) and tyramine, by a flow injection method. The results showed that DCM-OPA and MDHQ were the best among the five synthesised substrates and p-HPPA and p-HPA are better than HVA and tyramine. Substrates p-HPPA, p-HPA, DCM-OPA and MDHQ showed comparable ability for H₂O₂ detection in HRP and hemin catalysed reaction systems, with detection limits in the nmol l⁻¹ region. The stability of DCM-OPA is better than MDHQ, but both are stable for at least a month in a refrigerator.     

银纳米微球和银纳米棒自组装膜的制备及SERS研究

采用硼氢化钠还原硝酸银,用振荡器在不同转速下振荡得到单分散的银纳米微球和银纳米棒,再将银纳米微球及银纳米棒自组装于被3-氨丙基-三甲氧基硅烷(APTMS)修饰的玻璃基片上,制得了具有表面增强拉曼(SERS)活性的基底,分别以罗丹明6G(R6G)和罗丹明B(RB)为探针分子对这两种基底进行SERS活性检测,结果发现这两种基底均为较理想的SERS衬底。     

二步电沉积法制备Au/氧化石墨烯复合薄膜作为SERS基底

采用二步电沉积方法在Ti片表面制备了Au-氧化石墨烯（Au-GO）复合薄膜,通过XRD、SEM、XPS等对薄膜的组成、结构和形貌进行了表征,并以罗丹明6G（R6G）为探针分子,对Au-GO/Ti基底的SERS活性进行了表征。结果显示,Au纳米颗粒尺寸约为60 nm,均匀、致密分布于GO表面,该基底显示出较高的SERS活性,对R6G分子的检测极限可达~10^-10 mol·L^-1,增强因子高达约10⁶,且基底显示出良好的稳定性,在冰箱中存放90 d后,SERS活性仅降低30%左右。     

二步电沉积法制备Au/氧化石墨烯复合薄膜作为SERS基底

采用二步电沉积方法在Ti片表面制备了Au-氧化石墨烯（Au-GO）复合薄膜,通过XRD、SEM、XPS等对薄膜的组成、结构和形貌进行了表征,并以罗丹明6G（R6G）为探针分子,对Au-GO/Ti基底的SERS活性进行了表征。结果显示,Au纳米颗粒尺寸约为60 nm,均匀、致密分布于GO表面,该基底显示出较高的SERS活性,对R6G分子的检测极限可达~10^-10 mol·L^-1,增强因子高达约10⁶,且基底显示出良好的稳定性,在冰箱中存放90 d后,SERS活性仅降低30%左右。     

Catalytic specificity exhibited by p-sulfonatocalix[n]arenes in the methanolysis of N-acetyl-l-amino acids

Specific acid catalysis of p-sulfonatocalix[n]arenes (n = 4, Calix-S4; n = 6, Calix-S6; n = 8, Calix-S8) was observed in the alcoholysis of N-acetyl-l-amino acids in methanol. The methanolysis rates of basic amino acid substrates (His, Lys, and Arg) were markedly enhanced in the presence of Calix-Sn, as compared with rates observed with p-hydroxybenzenesulfonic acid (pHBS), which is a noncyclic analogue of Calix-Sn. This catalytic effect of Calix-Sn was not observed for the methanolysis of Phe, Tyr, and Trp substrates. On the other hand, (1)H NMR experiments following the effect of Calix-Sn on N-acetyl-l-amino acid substrates in CD(3)OD showed that the spectrum of a mixture of the His substrate with Calix-Sn was significantly different from the combined spectra of the respective compounds. These changes in spectra support the formation of an inclusion complex of Calix-Sn with basic amino acids. Furthermore, it was obvious that methanolysis of the His substrate catalyzed by Calix-S4 and Calix-S6 obeyed Michaelis-Menten kinetics. These results indicate that the catalytic activity of Calix-Sn originates from its forming a complex with specific substrates (basic amino acids), similar to enzymatic reactions.     

Ultrathin conjugated polymer network films of carbazole functionalized poly(p-phenylenes) via electropolymerization

Ultrathin films of a cross-linked and chemically distinct conjugated poly(p-phenylene) network via electropolymerization are described. The amphiphilic network precursor was synthesized by incorporating the alkoxy carbazole group (-O(CH2)5Cb) to a poly(p-phenylene) (C6PPPOH) backbone. In order to investigate the combined thin film electrochemical and photophysical properties of poly(p-phenylene)s and polycarbazole conjugated polymers, C6PPPC5Cb was deposited on substrates using the Langmuir Blodgett Kuhn (LBK) method. The monolayer isotherm of the polymer, C6PPPC5Cb, showed a liquid expanded region slightly different from the parent polymer C6PPPOH. Multilayers (up to 30 layers) were transferred to different substrates such as quartz, gold coated LaSFN9 and ITO substrates for analysis. For conversion to a conjugated polymer network (CPN) film, the electroactive carbazole group was electropolymerized using cyclic voltammetry (CV) resulting in polycarbazole linking units. The differences in the film properties and corresponding changes in the electrochemical behavior indicate the importance of film thickness and electron/ion transport process in cross linked network films. From the electrochemical studies, the scan rate was found to have a considerable effect on electropolymerization with higher oxidation and reduction peak values found for the rigid network polymer compared to the uncrosslinked polymers.     

On-chip ultra-thin layer chromatography and surface enhanced Raman spectroscopy

We demonstrate that silver nanorod (AgNR) array substrates can be used for on-chip separation and detection of chemical mixtures by combining ultra-thin layer chromatography (UTLC) and surface enhanced Raman spectroscopy (SERS). The UTLC-SERS plate consists of an AgNR array fabricated by oblique angle deposition. The capability of the AgNR substrates to separate the different compounds in a mixture was explored using a mixture of four dyes and a mixture of melamine and Rhodamine 6G at varied concentrations with different mobile phase solvents. After UTLC separation, spatially-resolved SERS spectra were collected along the mobile phase development direction and the intensities of specific SERS peaks from each component were used to generate chromatograms. The AgNR substrates demonstrate the potential for separating the test dyes with plate heights as low as 9.6 μm. The limits of detection are between 10(-5)-10(-6) M. Furthermore, we show that the coupling of UTLC with SERS improves the SERS detection specificity, as small amounts of target analytes can be separated from the interfering background components.     

Silver Nanostructures on Graphene Oxide as the Substrate for Surface-Enhanced Raman Scattering (SERS)

Nanosized surface-enhanced Raman scattering (SERS) substrates fabricated by the controlled growth of metal nanostructures on water-dispersed two-dimensional nanomaterials can open a new avenue for SERS analysis of liquid samples in biological fields. In this work, regular and uniform Ag nanostructures were grown on the surface of graphene oxide (GO) through a microwave-assisted hydrothermal method. Polyamidoamine (PAMAM) dendrimers were assembled on the surface of GO to form GO/PAMAM templates for growing Ag nanostructures, which are primarily comprised of Ag dimers and trimers. The prepared Ag/GO nanocomposites are highly dispersed and stable in aqueous solution and may be used as substrates for enhanced Raman detection of rhodamine 6?G (R6G) in aqueous solution. This special substrate provides high-performance SERS and suppresses R6G fluorescence in aqueous solution and is promising as a nanosized material for the enhanced Raman detection of liquid samples in biological diagnostics.     

Silver Nano Islands Enhanced Raman Scattering on Large Area Grating Substrates Fabricated by Two Beam Laser Interference

The authors preparedlarge area surface-enhanced Raman scattering(SERS) active substrates with tunable enhancement. First the large area gratings were fabricated by scanning a photoresist with two-beam laser interference and subsequently they were coated with silver nano islands via vacuum evaporation. SERS active metal island grating substrates with four different periods(300, 400, 515 and 600 nm) and Ag nano islands uniformly coated on an area of 2.5 cm×0.5 cm were obtained. The measured SERS spectra reveal the tuning effect of the period on the Raman signals period. The highest enhancement(ca. 10⁵) for Rhodamine 6G(R6G) as probing molecule is associated with a period of 515 nm due to the perfect matching of surface plasmons and Raman excitation line. A good reproducibility of SERS signals with almost the same SERS intensity at different spots was observed on all the larger area Ag island grating substrates.     

Smart Coatings Prepared via MAPLE Deposition of Polymer Nanocapsules for Light-Induced Release

Herein, smart coatings based on photo-responsive polymer nanocapsules (NC) and deposited by laser evaporation are presented. These systems combine remotely controllable release and high encapsulation efficiency of nanoparticles with the easy handling and safety of macroscopic substrates. In particular, azobenzene-based NC loaded with active molecules (thyme oil and coumarin 6) were deposited through Matrix-Assisted Pulsed Laser Evaporation (MAPLE) on flat inorganic (KBr) and organic (polyethylene, PE) and 3D (acrylate-based micro-needle array) substrates. SEM analyses highlighted the versatility and performance of MAPLE in the fabrication of the designed smart coatings. DLS analyses, performed on both MAPLE- and drop casting-deposited NC, demonstrated the remarkable adhesion achieved with MAPLE. Finally, thyme oil and coumarin 6 release experiments further demonstrated that MAPLE is a promising technique for the realization of photo-responsive coatings on various substrates.     

A new strategy to prepare surface-enhanced Raman scattering-active substrates by electrochemical pulse deposition of gold nanoparticles

In this communication, we develop a simple pathway to prepare SERS-active substrates with Au nanoparticles (NPs) by an electrochemical strategy of deposition-dissolution cycles (DDCs). The prepared SERS-active substrates demonstrate large Raman scattering enhancement for Rhodamine 6G (R6G) with a detection limit of 2 × 10(-12) M and an enhancement factor of 5.8 × 10(7).     

Enzymatic formation of unnatural novel polyketides from alternate starter and nonphysiological extension substrate by chalcone synthase

[reaction: see text] In the chalcone synthase (CHS) enzyme reaction, both the starter molecule and the extension unit of the polyketide chain elongation reaction were simultaneously replaced with nonphysiological substrates. When incubated with benzoyl-CoA and methylmalonyl-CoA as substrates, recombinant CHS from Scutellaria baicalensis afforded an unnatural novel triketide, 4-hydroxy-3,5-dimethyl-6-phenyl-pyran-2-one, along with a tetraketide, 4-hydroxy-3,5-dimethyl-6-(1-methyl-2-oxo-2-phenyl-ethyl)-pyran-2-one. On the other hand, the enzyme also accepted hexanoyl-CoA and methylmalonyl-CoA as substrates to produce an unnatural novel triketide, 4-hydroxy-3,5-dimethyl-6-pentyl-pyran-2-one.     

Fluoridolysis of 5,6-epoxy carbohydrates: application to the synthesis of 5-fluoro lactosamine and isolactosamine glycosides

The synthesis of 6-selenophenyl derivatives of β-1,3 and β-1,4 disaccharides has been explored for the purpose of extending our epoxide fluoridolysis methodology to the synthesis of 5-fluoro analogues of N-acetyl isolactosamine (isoLacNAc, lacto-N-biose) and N-acetyl lactosamine (LacNAc) glycosides. Successful synthesis of the C-6 selenium-containing disaccharides was achieved via Lewis acid-mediated donor and acceptor substrates, the latter containing a selectively protected C-6 hydroxyl group for ultimate conversion to the desired 6-selenophenyl disaccharides. In contrast, the use of selenium-containing acceptor substrates under a variety of conditions failed to yield the desired selenium-containing disaccharides. Oxidation of the 6-selenophenyl derivatives to the corresponding selenoxides followed by thermal elimination yielded the exocyclic olefins, which were converted to the 5,6-epoxides. Epoxide fluoridolysis yielded the desired target compounds, 5-fluoro β-octyl glycoside analogues of type 1 and type 2 glycans. The newly synthesized fluorine-containing disaccharides have potential application as fucosyltransferase substrates, both for mechanistic studies and in the chemoenzymatic synthesis of fluorine-containing oligosaccharides.     

A Transparent Thin Film with Hexagonal Mesostructure Containing Rhodamine 6G

A transparent this film was prepared by depositing the sol-gel mixture for the synthesis of MCM-41 mesoporous molecular sieve doped with rhodamine 6G(R6G) dye on glass substrates. The film of silica-surfactant-R6G materials, which was identified to possess hexagonally ordered mesostructure,was composed of nanocrystallites about 35 nm in diameter and 1-10μm in thickness. Cleanness of the substrates, concentration of the sol-gel mixture and rate of evaporation of the solvent were the key factors affecting transparency and homogeneity of the film. Moreover,optical change and lack in dye aggregation were observed to the R6G-functionalized MCM-41 thin film in contrast with that in ethanol solution.     

Sub-wavelength Raman spectroscopy on isolated silver islands

Surface Enhanced Raman Spectroscopy (SERS) is a valuable analytical tool for the investigation of molecules adsorbed on roughened noble metal surfaces. The shape, size, and surrounding of the metal protrusions play an important role in the Raman scattering enhancement. By combining scanning near-field optical microscopy (SNOM) with Raman spectroscopy the spatial resolution suffices for investigating isolated silver islands on SERS active substrates. We demonstrate an optical resolution below 70 nm for recording spectra on specifically prepared and fully characterized SERS substrates. For a quantitative evaluation of the SERS signal the spatial distribution of Rhodamine 6G (R6G) deposited on the SERS substrate was determined by friction force measurements. By comparing the Raman intensities of the SERS substrates with those of unmetallized support plates absolute SERS enhancement factors at specific locations on top and in the vicinity of the silver islands were determined directly.