Rheological behavior and particle suspension capability of guar gum: sodium tetraborate decahydrate gels containing cellulose nanofibrils

Guar gum (GG) fracturing fluids were studied by incorporating cellulose nanofibrils (CNFs) in anhydrous borax crosslinked guar gum gels. To fully understand the impact of CNF on the proppant suspension capability of developed fracturing fluids, their shear rate-dependent viscosity and viscoelasticity were investigated. The shear rate dependencies of fluids was fitted to the Carreau model. The zero shear rate viscosity and elasticity of fracturing fluids increased significantly by incorporating CNF in guar gum gels. On the other hand, the viscosity at high shear rates (>100 s^?1) decreased as desired. The proppant settling velocities through fracturing fluids were evaluated by modeling the terminal falling velocity of proppants moving through a Carreau model fluid. The experimental results of the rheological behavior and the modeling results of the proppant settling rate indicated that the fracturing fluids containing CNF had better suspension capabilities. In addition, the lower viscosities of CNF formulated GG gels at higher shear rates will make them more pumpable.     

Decorating silver nanoparticles on electrospun cellulose nanofibers through a facile method by dopamine and ultraviolet irradiation

In this paper, a new method is introduced for producing multi-functional cellulose nanofibers in order to achieve the biodegradable materials for various applications with a minimal amount of potentially toxic materials. Cellulose nanofibers (CNFs) were fabricated by electrospinning cellulose acetate solution followed by deacetylation. The CNFs were then treated with silver nitrate, ammonia, and sodium hydroxide and subsequently with dopamine as reducing and adhesive agent. Ag ions on the CNF surface were photo-reduced to Ag nanoparticles (NPs) using UVA irradiation to produce a dense layer of silver nanoparticles on the nanofibers. This is based on the simultaneous formation of polydopamine and Ag NPs on CNFs. Overall, this is a fast, simple, and efficient procedure that takes place in a conventional method at ambient temperature. The crystalline structure of CNFs decorated with AgNPs was studied by X-ray diffraction. Field-emission scanning electron microscopy and energy-dispersive X-ray patterns showed uniform distribution of silver nanoparticles on the CNF surface. Incorporation of AgNPs on the CNF surface via dopamine improved the electrical conductivity and also the tensile strength of the nanomat. The CNFs decorated with AgNPs exhibited a low electrical resistivity around 35 KΩ/square and a tensile strength of 87% higher than untreated CNFs.     

Effect of cellulose nanofiber on the dynamically asymmetric phase separation in epoxy/polysulfone blends

Significant effect of cellulose nanofibers (CNFs) on cure‐induced phase separation in dynamically asymmetric system is reported. An epoxy/polysulfone blends with typical layered structure formation was chosen as the polymer matrix, and morphology evolution and rheological behavior of systems with different nano‐size fiber loadings upon curing reaction were investigated using optical microscopy and rheological measurement. CNF distributed uniformly in the polymer matrix and had good interaction with polymer chains. Curing reaction of epoxy was promoted by CNF, making the system gel and phase separate earlier. Meanwhile, system viscosity was increased with CNF addition, and the movement of polymer chains and component diffusion were constrained, as a result, the structure evolution process was slowed down. The CNF altered the final morphologies, resulting in refined structures with smaller characteristic length scales or even completely change the morphologies from the layered structures to a bicontinuous structure when the CNF concentration reached to a relatively high level. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1357–1366     

Structure characterization of cellulose nanofiber hydrogel as functions of concentration and ionic strength

Carboxylated cellulose nanofibers (CNFs), having an average width of 7 nm and thickness of 1.5 nm, were produced by TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidation method. The fiber cross-sectional dimensions were determined using small-angle X-ray scattering (SAXS), transmission electron microscopy and atomic force microscopy techniques, where the rheological properties under different concentration and ionic strength were also investigated. The formation of hydrogel was evidenced by increasing the CNF concentration or ionic strength of the solvent (water), while the gel structure in ion-induced CNF hydrogels was found to be relatively inhomogeneous. The gelation behavior was closely related to the segmental aggregation of charged CNF, which could be quantitatively characterized by the correlation length (ξ) from the low-angle scattering profile and the scattering invariant (Q) in SAXS.     

Effects of poly(ethylene glycol) on the morphology and properties of biocomposites based on polylactide and cellulose nanofibers

Polylactide (PLA)/cellulose nanofiber (CNF) biocomposites were prepared via solution casting and direct melt mixing. To improve the compatibility, a masterbatch of CNFs and poly(ethylene glycol) (PEG) (1:2) was also prepared. The effects of PEG on the morphology and properties of the biocomposites were investigated. The dispersion/distribution of nanofibers in PLA was improved when the masterbatch was used and the composites were prepared in solution. Substantial effects on the rheological properties of solution-prepared PLA/CNF/PEG composites were observed compared to composites containing no PEG, whereas for melt-prepared composites no significant changes were detected. Increased crystalline content and crystallization temperature were observed for the composites prepared via the masterbatch and solvent casting. The storage modulus of PLA was increased by 42 and 553% at 25 and at 80 °C, respectively, for the solution-based PEG-compatibilized composite containing 2 wt% nanofibers. Also, a better light transmittance was measured for the PLA/CNF/PEG composites prepared in solution.     

Water redispersible cellulose nanofibrils adsorbed with carboxymethyl cellulose

Cellulose nanofibrils (CNFs) are difficult to redisperse in water after they have been completely dried due to the irreversible agglomeration of cellulose during drying. Here, we have developed a simple process to prepare water-redispersible dried CNFs by the adsorption of small amounts of carboxymethyl cellulose (CMC) and oven drying. The adsorption of CMC onto CNFs in water suspensions at 22 and 121 °C was studied, and the adsorbed amount of CMC was measured via conductimetric titration. The water-redispersibility of dried CNFs adsorbed with different amounts of CMC was characterized by sedimentation test. Above a critical threshold of CMC adsorption, i.e. 2.3 wt%, the oven dried CNF–CMC sample was fully redispersible in water. The morphology, rheological, and mechanical properties of water-redispersed CNF–CMC samples were investigated by field emission scanning electron microscopy, viscosity measurement, and tensile test, respectively. The water-redispersed CNFs preserved the original properties of never dried CNFs. This new method will facilitate the production, transportation and storage, and large-scale industrial applications of CNFs.     

Chemoselective Hydrogenation of Functionalized Nitroarenes and Imines by Using Carbon Nanofiber‐Supported Iridium Nanoparticles

The reaction of three types of carbon nanofibers (CNFs; platelet: CNF‐P, tubular: CNF‐T, herringbone: CNF‐H) with Ir₄(CO)₁₂ in mesitylene at 165 °C provided the corresponding CNF‐supported iridium nanoparticles, Ir/CNFs (Ir content=2.3–2.6 wt. %). Transmission electron microscopy (TEM) studies of these Ir/CNF samples revealed that size‐controlled Ir nanoparticles (average particle size of 1.1–1.5 nm) existed on the CNFs. Among the three Ir/CNF samples, Ir/CNF‐T showed an excellent catalytic activity and chemoselectivity towards hydrogenation of functionalized nitroarenes and imines; the corresponding aniline derivatives were obtained with high turnover numbers at ambient temperature under 10 atm of H₂, and the catalyst is reusable. Ir/CNF‐T was also effective for the reductive N‐alkylation of anilines with carbonyl compounds.     

Shear-thickening flow of nanoparticle suspensions flocculated by polymer bridging

The steady-shear viscosity, dynamic viscoelasticity, and stress relaxation behavior were measured for suspensions of silica nanoparticles dispersed in aqueous solutions of poly(ethylene oxide) (PEO). The suspensions of silica with diameters of 8-25 nm show striking shear-thickening profiles in steady shear and highly elastic responses under large strains in oscillatory shear. Since the silica particles are much smaller than the polymer coils, one molecule can extend through several particles by intrachain bridging. Each polymer coil may remain isolated as a floc unit and the silica particles hardly connect two flocs. Therefore, the flow of suspensions is Newtonian with low viscosity at low shear rates. When the polymer coils containing several nanoparticles are subjected to high shear fields, three-dimensional network is developed over the system. The shear-thickening flow may arise from the elastic forces of extended bridges. But, the polymer chain is easily detached from particle surface by thermal energy because of large curvature of particles. As a result, the network structures are reversibly broken down in a quiescent state and the suspensions behaves as viscoelastic fluids with the zero-shear viscosity.     

Effect of cellulose nanofibers on induced polymerization of aniline and formation of nanostructured conducting composite

Cellulose nanofibers (CNFs), derived from the most abundant and renewable biopolymer, are known as natural one-dimensional nanomaterials because of their high aspect ratio. CNFs also are rich in hydroxyl groups, offering opportunities for functionalization toward development of high-value nanostructured composites. Herein, CNFs were extracted from poplar wood powder by chemical pretreatment combined with high-intensity ultrasonication, and then coated with polyaniline (PANI) through in situ polymerization. The PANI-coated CNFs formed nanostructured frameworks around PANI, thereby conferring the CNF/PANI composite with stability and higher charge transport. The optimum PANI content to achieve maximum conductivity of CNF/PANI composites was determined. The morphology, crystall structure, chemical composition, and conductivity of the samples were characterized by transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and four-point probe method, respectivily. Our results demonstrated that CNFs can be effective as a template for a flexible and stable conducting polymer to form higher-order nanostructures.     

Synthesis and characterization of cubic cobalt oxide nanocomposite fluids

Narrow size distribution cubic Co₃O₄ nanoparticles were synthesized and rheological properties of suspensions of the cubes in oligomeric polyethylene glycol (PEG) were explored over a range of particle volume fractions and rotational shear flow conditions. At low and high particle volume fractions, the relative viscosity of the suspensions is described by a Krieger–Dougherty formula with an intrinsic viscosity consistent with expectations for suspensions of ideal cuboids. At intermediate to high particle loadings, the suspensions manifest complex rheological behavior, including shear thinning and shear-thickening features. These observations are discussed in terms of the charge carried by the cubes and the shear rate/volume fraction dependency of the transition from shear thinning to shear thickening.     

A composite made from palladium nanoparticles and carbon nanofibers for superior electrocatalytic oxidation of formic acid

We report on a novel type of nanocomposite for use in the electrooxidation of formic acid in fuel cells. The material is composed of palladium nanoparticles (Pd-NPs) and carbon nanofibers (CNFs) and was prepared by electrospinning of the precursors Pd(acac)₂ and polyacrylonitrile, respectively, followed by thermal treatment to generate in-situ Pd-NPs that are well dispersed within the CNF framework. The nanocomposite was characterized by TEM, high-resolution TEM, SEM, XRD, Raman spectroscopy, and XPS. The size of the Pd-NPs ranges from 12 to 82 nm, depending on the temperature for carbonization (700–1,000 °C). The length and width of the CNF is in the order of tens of micrometers and 300 to 500 nm, respectively. TEM and XPS studies indicate that the Pd-NPs are firmly embedded in the CNF, resulting in a good electrochemical stability of the composite. The electrocatalytic properties of the composite with respect to the oxidation of formic acid were studied by cyclic voltammetry and chronoamperometry. They showed a distinctly improved electrocatalytic activity and stability compared to a commercial Pd-on-carbon catalyst. The Pd/CNF composite carbonized at 900 °C was found to display the best performance.

Cellulose nanofibril-reinforced biodegradable polymer composites obtained via a Pickering emulsion approach

Preparation of cellulose nanofibril (CNF)-reinforced, biodegradable polymer composites is challenging in that it’s hard to achieve good dispersion of the hydrophilic cellulose fibers in a hydrophobic polymer matrix. In this work, we developed a surfactant-free and efficient process to prepare CNF-reinforced poly (lactic acid) (PLA) composites from an aqueous dichloromethane Pickering emulsion self-emulsified by CNFs. CNF/PLA composites of homogeneous dispersion were obtained upon evaporation of CH₂Cl₂, filtration, drying and hot-pressing. Differential scanning calorimetry measurement revealed an enhanced crystallization capacity of the CNF/PLA composites. Thermogravimetric analysis indicated an increase of onset degradation temperature. The composites displayed an enhanced storage modulus compared with neat PLA throughout the testing temperature range, and especially in the high-temperature region (>70 °C). Enhancements of the flexural modulus and strength were also achieved.     

Complete nanofibrillation of cellulose prepared by phosphorylation

In this work, we prepared phosphorylated pulp with a phosphorous content of 1.23 mmol/g by adding an aqueous solution of NH₄H₂PO₄ and urea to softwood pulp sheets followed by drying and curing with hot air and obtained cellulose nanofibers (CNFs) with a uniform width of 3–4 nm in approximately 100% gravimetric yield by high-pressure homogenization of the phosphorylated pulp slurry. After phosphorylation, no significant decrease in the pulp recovery ratio was observed, and the viscosity-average degree of polymerization of phosphorylated pulp was almost equal to that of the original pulp. In addition, the crystal structure and crystallinity index were almost unchanged during phosphorylation. The obtained phosphorylated CNF dispersion was highly transparent, and the maximum total light transmittance was nearly 100% when the CNF content was 0.2 wt%. The maximum viscosity of the CNF dispersions was nearly 10–100 times greater than that of conventional thickeners. Furthermore, we found that not only insufficient but also excessive phosphorylation negatively affected the gravimetric yield, transparency and viscosity.     

Ru/CNFs 催化剂催化氨分解制氢

 研究了鱼骨式碳纤维 (CNFs) 和管式碳纤维 (CNTs) 负载 Ru 催化剂的氨分解反应活性. 结果表明, Ru/CNFs 催化剂上氨分解活性高于 Ru/CNTs 催化剂. 通过改变 Ru 负载量或载体表面的含氧基团来调节 Ru 的粒径. Ru 的活性位随着 Ru 颗粒尺寸的增大而增加. CNFs 上的含氧基团对 Ru 颗粒的氨分解活性影响很大. 在相同粒径的 Ru 颗粒上, CNFs 表面的含氧基团增加了 Ru 的活性.     

A novel polyacrylamide nanocomposite hydrogel reinforced with natural chitosan nanofibers

Polyacrylamide (PAM) was used as a matrix material for fabricating novel nanocomposite hydrogels reinforced with natural chitosan nanofibers (CNFs) via in situ free-radical polymerization. The nanocomposite's structure, strength, morphology and rheological properties were investigated. The results showed that the CNFs had a strong interaction with PAM through hydrogen and covalent bondings. The CNFs acted as a multifunctional cross-linker and a reinforcing agent in the hydrogel system. The compression strength and storage modulus of the nanocomposite hydrogels were significantly higher than those of the pure PAM hydrogels and the corresponding PAM/chitosan semi-interpenetrating polymer network (PAM-SIPN) hydrogels. The swelling ratio (SR) of the nanocomposite hydrogels was lower than that of the PAM hydrogel, but was similar to that of the PAM-SIPN hydrogel. Among the CNF contents used, the 1.5 wt% CNF loading level showed the best combined swelling and mechanical properties for the hydrogels.     

Reinforcement of cellulose nanofibers in polyacrylamide gels

Cellulose nanofibers (CNFs) have emerged as a promising nanofiller for effective reinforcement of nanocomposites due to their excellent mechanical properties. In this study, CNFs were fabricated by a simple grinding method and used to strengthen polyacrylamide (PAM) gels through in situ free radical polymerization. The morphology, compression properties, and chemical structure of the prepared gels were investigated. The results showed that large amounts of nanofibers embedded inside the PAM matrix and formed network structure by increasing the CNF content. Significantly, PAM/CNF gel with 5 wt% CNF exhibited highly improved compression strength by 6.8-fold as compared to that of pure PAM gel. The FTIR analysis indicated that hydrogen bondings between CNF and PAM chains mainly contributed to the superior mechanical properties of the hybrid gels. In summary, this study provides a novel alternative approach for preparing tough composite gels by combing rigid CNF and soft polymer and extending the application of biomedical load-bearing gel materials such as artificial cartilage and other soft tissues.     

Ruthenium Nanoparticles on Nano‐Level‐Controlled Carbon Supports as Highly Effective Catalysts for Arene Hydrogenation

The reaction of three types of carbon nanofibers (CNFs; platelet: CNF‐P, tubular: CNF‐T, herringbone: CNF‐H) with [Ru₃(CO)₁₂] in toluene heated at reflux provided the corresponding CNF‐supported ruthenium nanoparticles, Ru/CNFs (Ru content=1.1–3.8 wt %). TEM studies of these Ru/CNFs revealed that size‐controlled Ru nanoparticles (2–4 nm) exist on the CNFs, and that their location was dependent on the surface nanostructures of the CNFs: on the edge of the graphite layers (CNF‐P), in the tubes and on the surface (CNF‐T), and between the layers and on the edge (CNF‐H). Among these Ru/CNFs, Ru/CNF‐P showed excellent catalytic activity towards hydrogenation of toluene with high reproducibility; the reaction proceeded without leaching of the Ru species, and the catalyst was reusable. The total turnover number of the five recycling experiments for toluene hydrogenation reached over 180 000 (mol toluene) (mol Ru)^?1. Ru/CNF‐P was also effective for the hydrogenation of functionalized benzene derivatives and pyridine. Hydrogenolysis of benzylic C? O and C? N bonds has not yet been observed. Use of poly(ethylene glycol)s (PEGs) as a solvent made possible the biphasic catalytic hydrogenation of toluene. After the reaction, the methylcyclohexane formed was separated by decantation without contamination of the ruthenium species and PEG. The insoluble PEG phase containing all of the Ru/CNF was recoverable and reusable as the catalyst without loss of activity.     

Size effect on the rheological behavior of nanoparticle suspensions in associating polymer solutions

Associating polymers are hydrophilic long-chain molecules containing a small amount of hydrophobic groups and tend to create bonds between chains by reversible associating interactions. The effects of associating polymer on the steady-shear viscosity and dynamic viscoelasticity are studied for suspensions of silica nanoparticles with diameters of 8, 18, and 25 nm. The silica particles of 8 nm are entrapped in the transient network of associating polymer by reversible adsorption. The enhancement of network results in the high viscosity with a Newtonian flow profile in the limit of zero shear rate. In suspensions of 25 nm silica, the hydrophobes extending from the chains adsorbed onto different particles can form a micelle by association interactions. The multichain bridging gave rise to the shear-thinning flow and high storage modulus at low frequencies. The suspensions of 25 nm silica are characterized as flocculated systems. Because of intermediate curvature, the flexible bridges are formed between silica particles of 18 nm. When the flexible bridges are highly extended within the lifetime in shear fields, the suspensions show shear-thickening flow. The shear-thickening flow can be attributed to the elastic effect of flexible bridges.     

Steady-shear and viscoelastic properties of cellulose nanofibril–nanoclay dispersions

We have investigated the steady-shear and viscoelastic properties of composite dispersions of cellulose nanofibrils (CNFs) with medium or high charge density and two different nanoclays, viz. rod-like sepiolite or plate-like bentonite. Aqueous dispersions of CNFs with medium charge density displayed significantly lower steady-state viscosity and storage modulus but higher gelation threshold compared with CNFs with high charge density. Dynamic light scattering (DLS) results showed that the apparent hydrodynamic radius of bentonite particles increased when CNFs were added, implying that CNFs adsorbed onto the amphoteric edges of the plate-like bentonite particles. The sepiolite network in CNF–sepiolite dispersions was relatively unaffected by addition of small amounts of CNFs, and DLS showed that the hydrodynamic radius of sepiolite did not change when CNFs were added. Addition of CNFs at concentrations above the gelation threshold resulted in drastic decrease of the steady-shear viscosity of the sepiolite dispersion, suggesting that the sepiolite network disintegrates and the rod-like clay particles are aligned also at low shear rate. The relative change in the rheological properties of the clay-based dispersions was always greater on addition of CNFs with high compared with medium charge density. This study provides insight into how the rheology of CNF–nanoclay dispersions depends on both the nanoclay morphology and the interactions between the nanoclay and nanocellulose particles, being of relevance to processing of nanocellulose–clay composites.     

Rheological and electrical analysis in carbon nanofiber reinforced polypropylene composites

Two different types of carbon nanofibers (CNF) were incorporated in the same polypropylene (PP) matrix by twin‐screw extrusion. The electrical characterization of both CNFs/PP composites as a function of volume fraction show different electrical performance: conducting and nonconducting. The objective of this work is to study the rheological behavior of both composites with the aim of relating it to the electrical behavior. The results indicate that the rheological behaviors are different, suggesting that rheology differentiates the microstructural variations responsible for the electrical performance. Furthermore, the main rheological parameters were correlated to the electrical conductivity. The results show that G′/G″ and G′ are the most sensitive parameters when compared with the onset of electrical percolation. Finally, in spite of the intrinsic measuring differences between electrical and rheological analysis, the two calculated thresholds are very similar: ～0.5 for the rheological and ～0.4 for the electrical. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013