Covalent modification of iron surfaces by electrochemical reduction of aryldiazonium salts.

Electrochemical reduction of aryldiazonium salts (in acetonitrile or acidic aqueous medium) on an iron or mild steel surface permits the strong bonding (which resists an ultrasonic cleaning) of aryl groups on these surfaces. Attachment of aryl groups was demonstrated by the combined used of electrochemistry, infrared spectroscopy and polarization modulation infrared reflection spectroscopy (PMIRRAS), Rutherford backscattering, X-ray photoelectron spectroscopy, and capacity measurements. The substituents of aryl groups, which can be widely varied, include NO2, I, COOH, and long alkyl chains. It is shown that the attachment of the aryl groups is to an iron and not to an oxygen atom and that the bond is covalent.     

Functionalization of glassy carbon with diazonium salts in ionic liquids

The paper reports on the chemical functionalization of glassy carbon electrodes with 4-bromobenzene (4-BBDT) and 4-(4'-nitrophenylazo)benzene diazonium tetrafluoroborate (4-NAB) salts in ionic liquids. The reaction was carried out at room temperature in air without any external electrical bias in either hydrophobic (1-butyl-3-methylimidazolium hexafluorophosphate) or hydrophilic (1-butyl-3-methylimidazolium methyl sulfate) ionic liquids. The resulting surfaces were characterized using X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and electrochemical measurements. Electrochemical reduction of the terminal nitro groups allowed the determination of surface coverage and formation of an amine-terminated carbon surfaces. The results were compared to glassy carbon chemically modified in an aqueous solution in the presence of 1% sodium dodecyl sulfate (SDS) with the same diazonium salt. Furthermore, Raman spectroscopy coupled with electrochemical measurements allowed to distinguish between the reduction of -NO2 to -NH2 group and the -N=N- to -NH-NH- bond.     

Chemical grafting of biphenyl self-assembled monolayers on ultrananocrystalline diamond

We have investigated the formation of self-assembled monolayers (SAMs) of 4'-nitro-1,1-biphenyl-4-diazonium tetrafluoroborate (NBD) onto ultrananocrystalline diamond (UNCD) thin films. In contrast to the common approach to modify diamond and diamond-like substrates by electrografting, the SAM was formed from the saturated solution of NBD in acetonitrile by pure chemical grafting. Atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and near edge X-ray absorption fine structure spectroscopy (NEXAFS) have been used to verify the direct covalent attachment of the 4'-nitro-1,1-biphenyl (NB) SAM on the diamond substrate via stable C-C bonds and to estimate the monolayer packing density. The results confirm the presence of a very stable, homogeneous and dense monolayer. Additionally, the terminal nitro group of the NB SAM can be readily converted into an amino group by X-ray irradiation as well as electrochemistry. This opens the possibility of in situ electrochemical modification as well as the creation of chemical patterns (chemical lithography) in the SAM on UNCD substrates and enables a variety of consecutive chemical functionalization for sensing and molecular electronics applications.     

Characterization of the deposition of organic molecules at the surface of gold by the electrochemical reduction of aryldiazonium cations

The deposition of 4-X phenyl groups (X = NO2, COOH, N-(C2H5)2) on polycrystalline gold electrode was achieved by the electrochemical reduction of the corresponding 4-substituted phenyldiazonium tetrafluoroborate salts in anhydrous acetonitrile media. The electrochemical quartz crystal microbalance measurements evidenced a two-step deposition process: the first one is the deposition of close to a monolayer and the second one is the relatively slower growth of multilayers. In this second region, the deposition is less efficient than for the first one. The electrochemical behavior of the resulting modified gold electrode was investigated in the presence of an electroactive redox probe and these results, together with the electrochemical quartz crystal microbalance data, demonstrated significant differences in reactivity and in deposition efficiency between the diazonium salts. The characterization of the modified electrodes by cyclic voltammetry and electrochemical impedance spectroscopy, as well as X-ray photoelectron spectroscopy measurements, showed that the formation of multilayers is possible and that a significant fraction of the deposited material remained at the electrode surface, even following ultrasonic treatment. The X-ray photoelectron spectroscopy data indicate that the existence of Au-C and Au-N=N-C linkages (where C represents a carbon atom of the phenyl group) is uncertain. Nonetheless, the deposition of the aryl groups by electrochemical reduction of diazonium cations yielded a film that adheres well to the gold surface and the deposited organic film hindered gold oxides formation in acidic medium.     

Covalent molecular assembly in supercritical carbon dioxide: a comparative study between amine- and anhydride-derivatized surfaces

Layer-by-layer covalent assembly of an oligoimide on an anhydride- derivatized silicon dioxide surface is investigated using supercritical carbon dioxide (SCCO2) as the depositing medium. The deposited films were characterized by X-ray photoelectron spectroscopy (XPS), ellipsometry (VASE), UV-visible spectroscopy, electrochemical impedance spectroscopy, nano indentation, and atomic force microscopy (AFM) and the properties of the films compared with those of an oligoimide deposited on amine-derivatized surfaces. Films formed on the anhydride surface are more uniform and stable possibly because the silane precursor for the anhydride is anchored to the surface through two (-Si-O-Si-) tripods. XPS results indicate that the interfacial reaction resulting in amide formation is almost complete in the case of the anhydride, but not in the case of the amine. We infer that the twin tripods linking the anhydride group to the surface may have improved the accessibility of the functional groups for immobilization of the next layer, thereby contributing to the better quality.     

Micro- and nanofabrication of robust reactive arrays based on the covalent coupling of dendrimers to activated monolayers

We report on methods to fabricate robust micro- and nanopatterned platforms, comprising high functional group densities and quasi three-dimensional structures, for possible applications in biochip array technologies. For this purpose, amine-terminated poly(amidoamine) (PAMAM) dendrimers were immobilized via amide linkage formation on 11,11'-dithiobis(N-hydroxysuccinimidylundecanoate) (NHS-C10) self-assembled monolayers (SAMs) on gold surfaces. The coupling reaction and the resulting assemblies were characterized by grazing incidence reflection Fourier transform infrared spectroscopy, contact angle measurements, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy; the obtained surface coverage values were successfully fitted with a Langmuir isotherm. The fraction of unreacted peripheral primary amine groups of the surface-immobilized PAMAM dendrimers was 28% as determined by XPS analysis of trifluoroacetic anhydride-labeled assemblies. Patterning of the PAMAM dendrimers on NHS-C10 SAMs on the micrometer and sub-100-nm scale was achieved by microcontact printing and dip pen nanolithography. The resulting patterns are characterized by their high degree of order and stability of the transferred molecules due to covalent attachment.     

Surface modification of indium tin oxide via electrochemical reduction of aryldiazonium cations

The facile deposition of para-substituted aryl films onto indium-tin oxide (ITO) electrodes by the electrochemical reduction of aryl diazonium salts in acetonitrile is reported. For the deposition conditions used in this report, the aryl film thicknesses are on the order of 1-6 nm, suggesting a multilayer structure. Regardless of the functional group on the aryl diazonium cation, (NO(2), CO(2)H, or fluorene) the electrodeposition behavior onto ITO electrodes is similar to that seen on other electrode materials. XPS and UV-vis data support the introduction of organic functional surface groups to ITO. The blocking behavior of the aryl films on ITO toward the Ru(NH(3))(6)(3+/2+) redox couple is in agreement with electron transfer through conjugated organic layers. The facile preparation of patterned aryl films with regular-spaced 700 nm voids on ITO is also described. Atomic force microscopy and scanning surface potential microscopy on patterned NO(2) aryl films are used to assess the molecular structure and orientation. A 100 mV decrease in the contact potential over NO(2) aryl films relative to bare ITO suggests that the aryl films are loosely structured as deposited with the NO(2) groups oriented at a small angle away from the ITO surface.     

Molecular adsorption on ZnO(1010) single-crystal surfaces: morphology and charge transfer

While ZnO has excellent electrical properties, it has not been widely used for dye-sensitized solar cells, in part because ZnO is chemically less stable than widely used TiO(2). The functional groups typically used for surface passivation and for attaching dye molecules either bind weakly or etch the ZnO surface. We have compared the formation of molecular layers from alkane molecules with terminal carboxylic acid, alcohol, amine, phosphonic acid, or thiol functional groups on single-crystal zinc oxide (1010) surfaces. Atomic force microscopy (AFM) images show that alkyl carboxylic acids etch the surface whereas alkyl amine and alkyl alcohols bind only weakly on the ZnO(1010) surface. Phosphonic acid-terminated molecules were found to bind to the surface in a heterogeneous manner, forming clusters of molecules. Alkanethiols were found to bind to the surface, forming highly uniform monolayers with some etching detected after long immersion times in an alkanethiol solution. Monolayers of hexadecylphosphonic acid and octadecanethiol were further analyzed by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. AFM scratching shows that thiols were bound strongly to the ZnO surface, suggesting the formation of strong Zn-S covalent bonds. Surprisingly, the tridentate phosphonic acids adhered much more weakly than the monodentate thiol. The influence of organic grafting on the charge transfer to ZnO was studied by time-resolved surface photovoltage measurements and electrochemical impedance measurements. Our results show that the grafting of thiols to ZnO leads to robust surfaces and reduces the surface band bending due to midgap surface states.     

Dense monolayers of metal-chelating ligands covalently attached to carbon electrodes electrochemically and their useful application in affinity binding of histidine-tagged proteins

In this work, monolayers of metal complexes were covalently attached to the surface of carbon electrodes with the goal of binding monolayers of histidine-tagged proteins with a controlled molecular orientation and a maintained biological activity. In this novel method, which is simple, versatile, and efficient, the covalent attachment was accomplished in a single step by the electrochemical reduction of aryl diazonium ions that were substituted with a nitrilotriacetic (NTA) or an imminodiacetic (IDA) ligand at the para position. The transient aryl radicals that were generated in the reduction were grafted to the surfaces of glassy carbon, highly oriented pyrolitic graphite, and graphite-based screen-printed electrodes, producing dense monolayers of the ligands. The NTA- and IDA-modified electrodes were shown to efficiently chelate Cu(II) and Ni(II) ions. The presence of the metal was established using X-ray photoelectron spectroscopy and electrochemistry. Surface coverages of the ligands were indirectly determined from the electroactivity of the copper(II) complex formed on the electrode surface. Studies on the effect of electrodeposition time and potential showed that, at sufficiently negative potentials, the surface coverage reached a saturating value in less than 2 min of electrodeposition time, which corresponds to the formation of a close-packed monolayer of ligand on the electrode surface. Once loaded with a metal ion, the modified electrode was able to bind specifically to histidine-tagged proteins such as the horseradish peroxidase (His-HRP) or to an enhanced, recombinant green-fluorescent protein via its N-terminal hexahistidine tail. In the case of His-HRP, the amount of active enzyme specifically immobilized by metal-chelating binding was determined from the analysis of electrocatalytic currents using cyclic voltammetry. The electrochemical grafting makes it possible to accurately controlled and electronically address the amount of deposited ligand on the conductive surfaces of carbon electrodes with any size and shape.     

Blocking properties of gold electrodes modified with 4-nitrophenyl and 4-decylphenyl groups

The electrochemical properties of Au electrodes grafted with 4-nitrophenyl and 4-decylphenyl groups have been studied. The electrografting of gold electrode surface with aryl groups was carried out by electroreduction of the corresponding diazonium salts in acetonitrile. The nitrophenyl film growth on gold was examined by atomic force microscopy, electrochemical quartz crystal microbalance and X-ray photoelectron spectroscopy. These measurements showed that a multilayer film of nitrophenyl groups was formed. Cyclic voltammetry was used to study the blocking properties of aryl-modified gold electrodes towards the Fe(CN)₆^3−/4− redox system. The reduction of oxygen was strongly suppressed on these electrodes as evidenced by the rotating disc electrode results.     

Photochemical modification of diamond films: introduction of perfluorooctyl functional groups on their surface

Photolysis of perfluoroazooctane with diamond films led the chemical modification of the surface to introduce perfluorooctyl functional groups, confirmed by means of Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and time-of-flight secondary ion mass spectrometry measurements. Diamond films modified with fluorine moieties showed improved frictional property and reduction of surface energy, as evaluated by contact angle to water, compared with a pristine diamond film. The contact angle and friction coefficient of chemically modified diamond film are 118 degrees and 0.1, respectively. The results of the value of the contact angle depending on irradiation times are consistent with those of the F/C ratio of fluorinated diamond films by monitoring with XPS.     

Generation of hydrophilic, bamboo-shaped multiwalled carbon nanotubes by solid-state pyrolysis and its electrochemical studies

A simple, efficient, and novel method was developed for the direct preparation of hydrophilic, bamboo-shaped carbon nanotubes by the pyrolysis of ruthenium(III) acetylacetonate in a Swagelock cell is reported. The obtained product exhibits mostly bamboo-shaped, straight, periodic twisted, multiwalled carbon nanotubes possessing diameters of 50-80 nm and lengths of around 10 microm. The pyrolyzed product was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution TEM (HRTEM), Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), micro-Raman, and cyclic voltammetric techniques. HRTEM studies showed that the walls of bamboo-shaped carbon nanotubes consisted of oblique grapheme planes with respect to the tube axis. The interlayer spacing between two graphitic layers was found to be 0.342 nm. XPS measurements have suggested that as-prepared carbon nanotubes consist the surface functional groups on the surface of carbon nanotubes. The electrochemical properties of synthesized carbon nanotubes have been evaluated. Thermogravimetric analysis (TGA), IR, and cyclic voltammetric studies showed the presence of oxygen functionalities. Raman studies revealed the presence of disorder in the graphitic carbon and the presence of exposed edge plane defects in the generated carbon nanotubes for influencing the surface behavior and electrochemical properties. The electrochemical behavior of electrodes made of bamboo-shaped carbon nanotubes served for an oxygen reduction reaction.     

Surface characterizations of mono-, di-, and tri-aminosilane treated glass substrates

The surface properties and structure of mono-, di-, and tri-aminosilane treated glass surfaces were investigated using surface analytical techniques including X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, atomic force microscopy (AFM), and streaming potential. An optimized dip-coating process was demonstrated to produce roughly silane monolayer coverage on the glass surface. The surface charge measurements indicated that aminosilanization converts the glass surface from negative to positive potentials at neutral pH values. Higher positive streaming potential was observed for tri-compared with mono- and di-aminosilane treated glass surfaces. For all aminosilane treated glass samples, the high-resolution N 1s XPS spectra indicated a preferential orientation of the protonated amino-groups towards the glass surface whereas the free amino groups were protruding outward. This study aimed to obtain uniform, reproducibly thin, strongly adhering, internally cross-linked, and high positively charged aminosilane-coated glass surfaces for the attachment of DNA fragments used in microarraying experiments.     

Modification of carbon electrode with aryl groups having an aliphatic amine by electrochemical reduction of in situ generated diazonium cations

The electrochemically induced functionalization of glassy carbon electrode by aryl groups having an aliphatic amine group was achieved by reduction of in situ generated diazonium cations in aqueous media. The corresponding diazonium cations of 4-aminobenzylamine, 2-aminobenzylamine, 4-(2-aminoethyl)aniline, N-methyl-1,2-phenylenediamine, and N, N-dimethyl- p-phenylenediamine were generated in situ with sodium nitrite in aqueous HCl. The kinetics of electrochemical grafting were investigated with electrochemical impedance spectroscopy and electrochemical quartz crystal microbalance measurements (with carbon-coated quartz crystal), and the barrier properties of the grafted layers were evaluated by cyclic voltammetry in the presence of electroactive redox probes such as Fe(CN)6 3-/4- and Ru(NH 3)6 (3+). The grafting efficiency of aryl groups was found to depend on the nature of the amine (primary, secondary, and tertiary), the chain length of the alkyl substituent, and the substitution position on the aromatic ring. The nitrosation of the "aliphatic" amine, in the case of secondary and tertiary amines, was also evidenced by X-ray photoelectron spectroscopy.     

Surface grafting polyethylene glycol (PEG) onto poly(ethylene-co-acrylic acid) films

Two reaction schemes were developed to covalently graft poly(ethylene glycol) (PEG) chains on poly(ethylene-co-acrylic acid) (EAA) surfaces. The schemes involved surface grafting of linker molecules L-lysine or polypropyleneamine dendrimer (AM64), with subsequent covalent bonding of PEG chains to the linker molecules. NHS and EDC were used to activate the carboxylic acid groups of the EAA in the outermost region of the film, estimated to be 20 nm by ATR-FTIR spectroscopy. XPS demonstrated that the conversion of this activation step was almost 100% in the detected region. After activation, L-lysine or dendrimer was grafted onto the EAA surface, followed by PEG grafting. Combining the data from ATR-FTIR, XPS, and contact angle goniometry, it was found that the PEG chains were grafted on the surface of the EAA film and larger surface coverage was achieved when the dendrimer was used as the intermediate layer. This surface also had the lowest water contact angle.     

Covalent attachment of acetylene and methylacetylene functionality to Si(111) surfaces: scaffolds for organic surface functionalization while retaining Si-C passivation of Si(111) surface sites

Si(111) surfaces have been functionalized with Si-CC-R species, where R = H or -CH3, using a two-step reaction sequence involving chlorination of H-Si(111) followed by treatment with Na-CC-H or CH3-CC-Na reagents. The resulting surfaces showed no detectable oxidation as evidenced by X-ray photoelectron spectroscopic (XPS) data in the Si 2p region, electrochemical measurements of Si-H oxidation, or infrared spectroscopy. The Si-CC-R-terminated surfaces exhibited a characteristic CC stretch in the infrared at 2179 cm-1, which was strongly polarized perpendicular to the Si(111) surface plane. XPS measurements in the C 1s region showed a low binding energy peak indicative of Si-C bonding, with a coverage that was, within experimental error, identical to that of the CH3-terminated Si(111) surface, which has been shown to fully terminate the Si atop sites on an unreconstructed Si(111) surface. The Si-CC-H-terminated surfaces were further functionalized by exposure to n-C4H9Li followed by exposure to para Br-C6H5-CF3, allowing for introduction of para -C6H5CF3 groups while maintaining the desirable chemical and electrical properties that accompany complete Si-C termination of the atop sites on the Si(111) surface.     

Corrosion resistant performances of alkanoic and phosphonic acids derived self-assembled monolayers on magnesium alloy AZ31 by vapor-phase method

Alkanoic and phosphonic acid derived self-assembled monolayers (SAMs) were formed on magnesium alloy by the vapor phase method. AFM and XPS studies showed that SAMs were formed on Mg alloy. The chemical and anticorrosive properties of the SAMs prepared on magnesium alloys were characterized using contact angle measurements, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. Water contact angle measurements revealed that, although SA and ISA have the same headgroup to anchor to the magnesium alloy surface, the packing density on the magnesium alloy surface could be considerably different. The contact angle hysteresis of SAMs with a carboxylate headgroup is much larger than that of SAMs with a phosphonic acid group. The XPS O 1s peaks indicated more likely a mix of mono-, bi-, or tridentate binding of phosphonic acid SAM to the oxide or hydroxide surface of the Mg alloy. The electrochemical measurements showed that the phosphonic acid derived SAM had better corrosion resistance compared to alkanoic acid derived SAM. The chemical stability of SAMs modified magnesium alloy was investigated using water contact angle and XPS measurements. The water contact angle and XPS measurements revealed that the molecular density of OP and PFEP on magnesium alloy would be higher than those of SA and ISA on magnesium alloy.     

Electrochemical Modification of Gold Electrodes with Azobenzene Derivatives by Diazonium Reduction

An electrochemical study of Au electrodes electrografted with azobenzene (AB), Fast Garnet GBC (GBC) and Fast Black K (FBK) diazonium compounds is presented. Electrochemical quartz crystal microbalance, ellipsometry and atomic force microscopy investigations reveal the formation of multilayer films. The elemental composition of the aryl layers is examined by X‐ray photoelectron spectroscopy. The electrochemical measurements reveal a quasi‐reversible voltammogram of the Fe(CN)₆^3?/4? redox couple on bare Au and a sigmoidal shape for the GBC‐ and FBK‐modified Au electrodes, thus demonstrating that electron transfer is blocked due to the surface modification. The electrografted AB layer results in strongest inhibition of the Fe(CN)₆^3?/4? response compared with other aryl layers. The same tendencies are observed for oxygen reduction; however, the blocking effect is not as strong as in the Fe(CN)₆^3?/4? redox system. The electrochemical impedance spectroscopy measurements allowed the calculation of low charge‐transfer rates to the Fe(CN)₆^3? probe for the GBC‐ and FBK‐modified Au electrodes in relation to bare Au. From these measurements it can be concluded that the FBK film is less compact or presents more pinholes than the electrografted GBC layer.     

Electrostatic attachment of gold and poly(lactic acid) nanoparticles onto omega-aminoalkanoic acid self-assembled monolayers on 316L stainless steel

The assembly of poly(lactic acid) (PLA) nanoparticles on a 12-aminodecanoic acid (ADA) self-assembled monolayer (SAM) is described. Assembly is accomplished through electrostatic interactions between the positively charged SAM and the negatively charged PLA nanoparticles. The strategy used involves two steps in which a preliminary electrochemical coating of the ADA SAM is followed by a second step that involves immersing the SAM in a solution containing gold or PLA nanoparticles. The SAM was characterized by using cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS), FTIR spectroscopy, and contact angle measurements, whereas scanning electron microscopy (SEM) was used to image the nanoparticles after electrostatic attachment was achieved. We found that the surface coverage of the nanoparticles could be controlled by modulating the electrostatic interactions between the negatively charged particles and the positively charged SAM surface by varying the pH of the nanoparticle solution, the immersion time, and the number of cyclic voltammetry scans under which the SAM was formed.     

Semicarbazide-functionalized Si(111) surfaces for the site-specific immobilization of peptides

The covalent attachment of semicarbazide-functionalized layers to hydrogen-terminated Si(111) surfaces is reported. The surface modification, based on the photoinduced hydrosilylation of a Si(111) surface with protected semicarbazide-functionalized alkenes, was investigated by means of X-ray photoelectron spectroscopy (XPS), contact angle measurements, and atomic force microscopy (AFM). The removal of the protecting group yielded a semicarbazide-terminated monolayer which was reacted with peptides bearing a glyoxylyl group for site-specific alpha-oxo semicarbazone ligation.