Supramolecular Enhancement of Charge Transport through Pillar[5]arene-Based Self-Assembled Monolayers

Intermolecular charge transport is one of the essential modes for modulating charge transport in molecular electronic devices. Supermolecules are highly promising candidates for molecular devices because of their abundant structures and easy functionalization. Herein, we report an efficient strategy to enhance charge transport through pillar[5]arene self-assembled monolayers (SAMs) by introducing cationic guests. The current density of pillar[5]arene SAMs can be raised up to about 2.1 orders of magnitude by inserting cationic molecules into the cavity of pillar[5]arenes in SAMs. Importantly, we have also observed a positive correlation between the charge transport of pillar[5]arene-based complex SAMs and the binding affinities of the pillar[5]arene-based complexation. Such an enhancement of charge transport is attributed to the efficient host–guest interactions that stabilize the supramolecular complexes and lower the energy gaps for charge transport. This work provides a predictive pattern for the regulation of intermolecular charge transport in guiding the design of next generation switches and functional sensors in supramolecular electronics.     

Charge Tunneling along Short Oligoglycine Chains

This work examines charge transport (CT) through self‐assembled monolayers (SAMs) of oligoglycines having an N‐terminal cysteine group that anchors the molecule to a gold substrate, and demonstrate that CT is rapid (relative to SAMs of n‐alkanethiolates). Comparisons of rates of charge transport‐using junctions with the structure Au^TS/SAM//Ga₂O₃/EGaIn (across these SAMs of oligoglycines, and across SAMs of a number of structurally and electronically related molecules) established that rates of charge tunneling along SAMs of oligoglycines are comparable to that along SAMs of oligophenyl groups (of comparable length). The mechanism of tunneling in oligoglycines is compatible with superexchange, and involves interactions among high‐energy occupied orbitals in multiple, consecutive amide bonds, which may by separated by one to three methylene groups. This mechanistic conclusion is supported by density functional theory (DFT).     

Multiscale charge injection and transport properties in self-assembled monolayers of biphenyl thiols with varying torsion angles

This article describes the molecular structure-function relationship for a series of biphenylthiol derivatives with varying torsional degree of freedom in their molecular backbone when self-assembled on gold electrodes. These biphenylthiol molecules chemisorbed on Au exhibit different tilt angles with respect to the surface normal and different packing densities. The charge transport through the biphenylthiol self-assembled monolayers (SAMs) showed a characteristic decay trend with the effective monolayer thickness. Based on parallel pathways model the tunneling decay factor β was estimated to be 0.27??(-1) . The hole mobility of poly(3-hexylthiophene)-based thin-film transistors incorporating a biphenylthiol SAM coating the Au source and drain electrodes revealed a dependence on the injection barrier with the highest occupied molecular orbital (HOMO) level of the semiconductor. The possible role of the resistivity of the SAMs on transistor electrodes on the threshold voltage shift is discussed. The control over the chemical structure, electronic properties, and packing order of the SAMs provides a versatile platform to regulate the charge injection in organic electronic devices.     

Charge transport through self-assembled monolayers of compounds of interest in molecular electronics

The electrical properties of self-assembled monolayers (SAMs) on metal surfaces have been explored for a series of molecules to address the relation between the behavior of a molecule and its structure. We probed interfacial electron transfer processes, particularly those involving unoccupied states, of SAMs of thiolates or arylates on Au by using shear force-based scanning probe microscopy (SPM) combined with current-voltage (i-V) and current-distance (i-d) measurements. The i-V curves of hexadecanethiol in the low bias regime were symmetric around 0 V and the current increased exponentially with V at high bias voltage. Different than hexadecanethiol, reversible peak-shaped i-V characteristics were obtained for most of the nitro-based oligo(phenylene ethynylene) SAMs studied here, indicating that part of the conduction mechanism of these junctions involved resonance tunneling. These reversible peaked i-V curves, often described as a negative differential resistance (NDR) effect of the junction, can be used to define a threshold tip bias, V(TH), for resonant conduction. We also found that for all of the SAMs studied here, the current decreased with increasing distance, d, between tip and substrate. The attenuation factor beta of hexadecanethiol was high, ranging from 1.3 to 1.4 A(-1), and was nearly independent of the tip bias. The beta-values for nitro-based molecules were low and depended strongly on the tip bias, ranging from 0.15 A(-1) for tetranitro oligo(phenylene ethynylene) thiol, VII, to 0.50 A(-1) for dinitro oligo(phenylene) thiol, VI, at a -3.0 V tip bias. Both the V(TH) and beta values of these nitro-based SAMs were also strongly dependent on the structures of the molecules, e.g. the number of electroactive substituent groups on the central benzene, the molecular wire backbone, the anchoring linkage, and the headgroup. We also observed charge storage on nitro-based molecules. For a SAM of the dintro compound, V, approximately 25% of charge collected in the negative scan is stored in the molecules and can be collected at positive voltages. A possible mechanism involving lateral electron hopping is proposed to explain this phenomenon.     

Ab initio calculations of the reaction mechanisms for metal-nitride deposition from organo-metallic precursors onto functionalized self-assembled monolayers

An atomistic mechanism has been derived for the initial stages of the adsorption reaction for metal-nitride atomic layer deposition (ALD) from alkylamido organometallic precursors of Ti and Zr on alkyltrichorosilane-based self-assembled monolayers (SAMs). The effect of altering the terminal functional group on the SAM (including -OH, -NH2, -SH, and -NH(CH3)) has been investigated using the density functional theory and the MP2 perturbation theory. Reactions on amine-terminated SAMs proceed through the formation of a dative-bond complex with an activation barrier of 16-20 kcal/mol. In contrast, thiol-terminated SAMs form weak hydrogen-bonded intermediates with activation barriers between 7 and 10 kcal/mol. The deposition of Ti organometallic precursors on hydroxyl-terminated SAMs proceeds through the formation of stronger hydrogen-bonded complexes with barriers of 7 kcal/mol. Zr-based precursors form dative-bonded adducts with near barrierless transitions. This variety allows us to select a kinetically favorable substrate for a chosen precursor. The predicted order of reactivity of differently terminated SAMs and the temperature dependence of the initial reaction probability have been confirmed for Ti-based precursors by recent experimental results. We predict that the replacement of methyl groups by trifluoromethyl groups on the SAM backbone decreases the activation barrier for amine-terminated SAMs by 5 kcal/mol. This opens a route to alter the native reactivities of a given SAM termination, in this case making amine termination energetically viable. The surface distribution of SAM molecules has a strong effect on the adsorption kinetics of Ti-based precursors. Unimolecular side decomposition reactions were found to be kinetically competitive with adsorption at 400 K.     

Charge transport through polyene self-assembled monolayers from multiscale computer simulations

We combine first-principles density-functional theory with matrix Green's function calculations to predict the structures and charge transport characteristics of self-assembled monolayers (SAMs) of four classes of systems in contact with Au(111) electrodes: conjugated polyene chains (n = 4, 8, 12, 16, and 30) thiolated at one or both ends and saturated alkane chains (n = 4, 8, 12, and 16) thiolated at one or both ends. For the polyene SAMs, we find no decay in the current as a function of chain length and conclude that these 1-3 nm long polyene SAMs act as metallic wires. We also find that the polyene-monothiolate leads to a contact resistance only 2.8 times higher than that for the polyene-dithiolate chains, indicating that the device conductance is dominated by the properties of the molecular connector with less importance in having a second molecule-electrode contact. For the alkane SAMs, we observe the normal exponential decay in the current as a function of the chain length with a decay constant of beta(n) = 0.82 for the alkane-monothiolate and 0.88 for the alkane-dithiolate. We find that the contact resistance for the alkane-monothiolate is 12.5 times higher than that for the alkane-dithiolate chains, reflecting the extra resistance due to the weak contact on the nonthiolated end. These contrasting charge transport characteristics of alkane and polyene SAMs and their contact dependence are explained in terms of the atomic projected density of states.     

Comparative electrochemical and impedance studies of self-assembled rigid-rod molecular wires and alkanethiols on gold substrates

A study of the charge transfer and self-assembly characteristics of two new rigid-rod molecular wires 1 and 2 assembled on polycrystalline gold electrodes was carried out using electrochemical impedance spectroscopy and cyclic voltammetry. This class of wires have precisely controlled (ca. 1.5-2.5 nm) lengths of π-conjugation, with extended HOMO and LUMO wavefunctions. While rotations can occur around the C-C single bonds, the molecules cannot isomerise or fold due to their rigid backbone structures. The behaviour of these wires was compared with SAMs of heptanethiol (HPT) and dodecanethiol (DDT). It was found that SAMs of 1, which bears flexible hexyloxy sidechains, had randomly distributed pinholes which show microelectrode behaviour even when diluted with DDT. SAMs of 2, which do not have any sidechains, were well-organised at open-circuit potentials enabling evaluation of electron transfer kinetics assuming an average film thickness. However, impedance studies show that deviations from open circuit potentials resulted in an exponential decrease in charge transfer resistance, whereas capacitance remained constant, possibly attributable to conformational changes of the SAM. The syntheses and characterisation of the molecules is described.     

Interaction between benzenedithiolate and gold: classical force field for chemical bonding

We have constructed a group of classical potentials based on ab initio density-functional theory (DFT) calculations to describe the chemical bonding between benzenedithiolate (BDT) molecule and gold atoms, including bond stretching, bond angle bending, and dihedral angle torsion involved at the interface between the molecule and gold clusters. Three DFT functionals, local-density approximation (LDA), PBE0, and X3LYP, have been implemented to calculate single point energies (SPE) for a large number of molecular configurations of BDT-1, 2 Au complexes. The three DFT methods yield similar bonding curves. The variations of atomic charges from Mulliken population analysis within the molecule/metal complex versus different molecular configurations have been investigated in detail. We found that, except for bonded atoms in BDT-1, 2 Au complexes, the Mulliken partial charges of other atoms in BDT are quite stable, which significantly reduces the uncertainty in partial charge selections in classical molecular simulations. Molecular-dynamics (MD) simulations are performed to investigate the structure of BDT self-assembled monolayer (SAM) and the adsorption geometry of S adatoms on Au (111) surface. We found that the bond-stretching potential is the most dominant part in chemical bonding. Whereas the local bonding geometry of BDT molecular configuration may depend on the DFT functional used, the global packing structure of BDT SAM is quite independent of DFT functional, even though the uncertainty of some force-field parameters for chemical bonding can be as large as approximately 100%. This indicates that the intermolecular interactions play a dominant role in determining the BDT SAMs global packing structure.     

Conformations and charge transport characteristics of biphenyldithiol self-assembled-monolayer molecular electronic devices: a multiscale computational study

We report a computational study of conformations and charge transport characteristics of biphenyldithiol (BPDT) monolayers in the (sqrt.3 x sqrt.3)R30 degrees packing ratio sandwiched between Au(111) electrodes. From force-field molecular-dynamics and annealing simulations of BPDT self-assembled monolayers (SAMs) with up to 100 molecules on a Au(111) substrate, we identify an energetically favorable herringbone-type SAM packing configuration and a less-stable parallel packing configuration. Both SAMs are described by the (2sqrt.3 x sqrt.3)R30 degrees unit cell including two molecules. With subsequent density-functional theory calculations of one unit cell of the (i) herringbone SAM with the molecular tilt angle theta approximately 15 degrees , (ii) herringbone SAM with theta approximately 30 degrees , and (iii) parallel SAM with theta approximately 30 degrees, we confirm that the herringbone packing configuration is more stable than the parallel one but find that the energy variation with respect to the molecule tilting within the herringbone packing is very small. Next, by capping these SAMs with the top Au(111) electrode, we prepare three molecular electronic device models and calculate their coherent charge transport properties within the matrix Green's function approach. Current-voltage (I-V) curves are then obtained via the Landauer-Buttiker formula. We find that at low-bias voltages (|V| < or = 0.2 V) the I-V characteristics of models (ii) and (iii) are similar and the current in model (i) is smaller than that in (ii) and (iii). On the other hand, at higher-bias voltages (|V| > or 0.5 V), the I-V characteristics of the three models show noticeable differences due to different phenyl band structures. We thus conclude that the BPDT SAM I-V characteristics in the low-bias voltage region are mainly determined by the -Au [corrected] interaction within the individual molecule-electrode contact, while both intramolecular conformation and intermolecular interaction can affect the BPDT SAM I-V characteristics in the high-bias voltage region.     

Ru2(ap)4(sigma-oligo(phenyleneethynyl)) molecular wires: synthesis and electronic characterization

Reported in this contribution are the synthesis, characterization, and charge transport properties of wire-like Ru2(ap)4(OPEn), where ap is 2-anilinopyridinate and OPE is -(CCC6H4)nSCH2CH2SiMe3 with n = 1 (1) and 2 (2). Scanning tunneling microscopy (STM) measurements of compound 2 inserted into a SAM of C11 thiol reveal that molecule 2 exhibits (i) the stochastic switching characteristic of wire molecules embedded in insulating SAMs and (ii) higher conductivity than the C11 thiol SAM. More importantly, analysis of the molecular electronic decay constant (beta) exhibits a decrease of at least 15% as compared to purely organic molecular analogues. Hence, the transport characteristics of molecules can be significantly improved for nanoscale electronics through the incorporation of a Ru2 fragment into conjugated backbone.     

Molecular Dynamics Simulation of the Self-assembled Monolayers of 1-Adamantanethiolate and Its Derivatives on Au（111） Surfaces

The self-assembled monolayers （SAMs） of 1-adamantanethiolate and its derivatives on Au（111） surface were investigated. Density functional theory （DFT） calculation indicates that the most stable configuration for absorption is at the face centered cubic （fcc）-bridge site. Canonical ensemble molecular dynamics （MD） simulations were carried out to study the structures and energies of the SAMs. The ordered structures of the SAMs were analyzed by means of radial distribution function and the relative stability of the SAMs was compared. It was concluded by the comparison of various contributions to the SAM formation energy that the formation of the SAMs was determined by the intermolecular nonbonding interaction and the chemical bonding interaction of sulfur and gold.     

Conformation and dynamics of arylthiol self-assembled monolayers on Au(111)

We report a computational investigation of the conformation and the dynamics of self-assembled monolayers (SAMs) of a set of aromatic thiols arranged in the ( radical3 x radical3)-R30 degrees packing ratio on a Au(111) surface using molecular dynamics (MD) simulations. It was found that the molecular conformations were better defined for the arylthiol with two phenyl groups as compared to those with a single phenyl group and that the chemical structure of the head and tail groups had a considerable influence on the system geometry. In line with the density functional theory (DFT) calculations of small thiol molecules, we found for the SAMs that the face-centered cubic (fcc) site on the Au(111) surface was the most preferred, followed by the hexagonal close-packed (hcp) site, while the bridge position showed the characteristics of a local energy maximum. The dynamics of thiol head groups on these three Au sites was found to govern the overall dynamics of SAMs as measured by the mean square displacement. We also report that both the conformation and the dynamics on the studied time scale were driven by the SAM formation energy.     

Self-assembled monolayers from biphenyldithiol derivatives: optimization of the deprotection procedure and effect of the molecular conformation

A series of biphenyl-derived dithiol (BDDT) compounds with terminal acetyl-protected sulfur groups and different structural arrangements of both phenyl rings have been synthesized and fully characterized. The different arrangements were achieved by introducing hydrocarbon substituents in the 2 and 2' positions of the biphenyl backbone. The presented model compounds enable the investigation of the correlation between the intramolecular conformation and other physical properties of interest, like, e.g., molecular assembly or electronic transport properties. Here, the ability of these model compounds to form self-assembled monolayers (SAMs) on Au(111) and Ag(111) is investigated in details. The deprotection of the target molecules was performed in situ using either NH4OH or triethylamine (TEA) deprotection agent. The fabricated films were characterized by synchrotron-based high-resolution photoelectron spectroscopy and near-edge absorption fine structure spectroscopy. Whereas the deprotection by NH4OH was found to result in the formation of multilayer films, the deprotection by TEA allowed the preparation of densely packed BDDT SAMs with a noticeably higher orientational order and smaller molecular inclination on Ag than on Au. Introduction of the alkyl bridge between the individual rings of the biphenyl backbone did not lead to a noticeable change in the structure and packing density of the BDDT SAMs as long as the molecule had a planar conformation in the respective SAM. The deviation from this conformation resulted in the deterioration of the film quality and a decrease of the orientational order.     

The role of externally-modulated electrostatic interactions in amplifying charge transport across lysine-doped peptide junctions

Many evolved biomolecular functions such as ion pumping or redox catalysis rely on controlled charge transport through the polypeptide matrix, which can be regulated by shifts in molecular protonation states and dependent supramolecular packing modes in response to environmental cues. However, the exact roles of such dynamic, non-covalent interactions in peptide charge transport have remained elusive. To tackle this challenge, here we report the modulation of charge transport in a series of lysine (Lys)-substituted hepta-glycine (Gly) peptide self-assembled monolayers (SAMs) on template-striped gold (Au^TS) bottom electrodes with eutectic gallium-indium (EGaIn) liquid metal top electrodes. We demonstrate systematic modulation of hydrogen bonding and more general electrostatic interactions by shifting the position of the charged Lys-residue and creating different protonation patterns by changing the environmental pH in the Au^TS/peptide//GaO_x/EGaIn junctions. The effective modulation is evidenced by current density–voltage (J-V) measurements combined with SAM characterization using ultraviolet photoelectron spectroscopy (UPS) and angle-resolved X-ray photoelectron spectroscopy (ARXPS), polarization modulation–infrared reflection-absorption spectroscopy (PM-IRRAS), and molecular dynamics (MD) simulations. Decreasing the hydrogen bonding inside the peptide SAMs and increasing the electrostatic interactions by environmental counterions amplifies the charge transport differently with Lys-position, which means that the sensitive electrical response of peptide SAMs can be tuned by the peptide sequence. Our results provide insights into the relationship between molecular design and in situ modulation of charge transport properties for the development of bionanoelectronics.     

Structure and identity of 4,4'-thiobisbenzenethiol self-assembled monolayers

Self-assembled monolayers (SAMs) of 4,4'-thiobisbenzenethiol (TBBT) can be formed on Au surface spontaneously. The structural characteristics and adsorption behavior of TBBT SAMs on Au have been investigated by surface enhanced Raman scattering (SERS), electrochemical cyclic voltammetry (CV), ac impedance spectroscopy (EIS), and atomic force microscopy (AFM). It is demonstrated that TBBT adsorbed on Au by losing a H atom, forming one Au-S bond, and the other mercapto group is free at the surface of the monolayer owing to the presence of the nu(S-H) at 2513 cm(-1) and the delta(C-S-H) at 910 cm(-1) in SERS. The enhancement of the vibration of C-S (1064 cm(-1)), the aromatic C-H vibration (3044 cm(-1)), and the absence of the vibration of S-S illustrate TBBT adsorbed on Au forming a monolayer with one benzene ring tilted with respect to the Au surface. The interpretation of the observed frequencies is aided by ab initio molecular orbital (MO) calculations at the HF/6-31G level of theory. Electrochemical CV and EIS indicate TBBT monolayers can passivate the Au effectively for its low ratio of pinhole defects (theta = 99.6%). AFM studies give details about the surface morphology. The applications of TBBT SAMs have been extensively investigated by exposure of Cu2+ ion to TBBT SAMs on Au and covalent adsorption of metal nanoparticles. Electrochemical, X-ray photoelectron spectroscopic, and SERS results indicate that Cu2+ can react with TBBT SAMs and present on TBBT SAMs as Cu(I). A scanning electron microscopic image of Ag nanoparticles on TBBT/Au and the Raman spectrum of TBBT in smooth macroscopic Au/TBBT SAMs/Ag nanoparticle sandwich structure indicate that metal nanoparticles can be adsorbed on TBBT SAMs effectively through covalent linkage.     

Synthesis and stability of monolayer-protected Au38 clusters

A synthesis strategy to obtain monodisperse hexanethiolate-protected Au38 clusters based on their resistance to etching upon exposure to a hyperexcess of thiol is reported. The reduction time in the standard Brust-Schiffrin two-phase synthesis was optimized such that Au38 were the only clusters that were fully passivated by the thiol monolayer which leaves larger particles vulnerable to etching by excess thiol. The isolated Au38 was characterized by mass spectrometry, thermogravimetric analysis, optical spectroscopy, and electrochemical techniques giving Au38(SC6)22 as the molecular formula for the cluster. These ultrasmall Au clusters behave analogously to molecules with a wide energy gap between occupied (HOMO) and unoccupied levels (LUMO) and undergo single-electron charging at room temperature in electrochemical experiments. Electrochemistry provides an elegant means to study the electronic structure and the chemical stability of the clusters at different charge states. We used cyclic voltammetry and scanning electrochemical microscopy to unequivocally demonstrate that Au38 can be reversibly oxidized to charge states z = +1 or +2; however, reduction to z = -1 leads to desorption of the protecting thiolate monolayer. Although this reductive desorption of thiol from the cluster surface is superficially analogous to electrochemical desorption of planar self-assembled monolayers (SAMs) from macroscopic electrodes, the molecular details of the process are likely to be complicated based on the current view that the thiolate monolayer in clusters is in fact composed of polymeric Au-S complexes.     

Carbon nanomembranes from self-assembled monolayers: Functional surfaces without bulk

In this topical review we describe the fabrication, characterization and applications of 1 nm thick, mechanically stable carbon nanomembranes (CNMs). They represent a new type of functional two-dimensional (2D) materials, which can be concisely described as “surfaces without bulk”. Because CNMs are made by electron-induced crosslinking of aromatic self-assembled monolayers (SAMs), we start with an overview of SAMs with a special emphasis on aromatic SAMs. We describe the chemical modification of SAMs by electron, ion and photon irradiation, introduce the concepts of irradiation-induced crosslinking and chemical nanolithography of aromatic SAMs and discuss the underlying physical and chemical mechanisms. We present examples for applications of these phenomena in the engineering of complex surface architectures, e.g., nanopatterns of proteins, fluorescent dyes or polymer brushes. Then we introduce a transfer procedure to release cross-linked aromatic SAMs from their original substrates and to form free-standing CNMs. We discuss mechanical and electrical properties of CNMs and demonstrate that they can be converted into graphene upon annealing. This transformation opens an original and flexible molecular route towards the large-scale synthesis of graphene sheets with tunable properties. Finally, we demonstrate the lithographic and chemical tailoring of CNMs to fabricate novel functional 2D carbon materials: supports for high resolution transmission electron microscopy (HRTEM) and nanolithography, nanosieves, Janus nanomembranes, polymer carpets, complex layered structures. Prospects of combining different types of nanomembranes made of SAMs (CNMs, graphene, nanosieves, Janus nanomembranes) towards the engineering of novel functional nanomaterials for a variety of electronic, optical, lab-on-a-chip and micro-/nanomechanical (MEMS/NEMS) devices are discussed.     

Interfacial friction of surfaces grafted with one- and two-component self-assembled monolayers

We present a quantitative study of the nanoscale frictional properties of one-component (pure) and two-component (mixed) alkylsilane self-assembled monolayers (SAMs). The load and velocity dependence of the friction force was measured in air and ethanol using lateral force microscopy (LFM). It was observed that for SAMs with well-ordered structure (pure SAMs and mixed SAMs composed of two long chain molecules) friction depends nonlinearly on load, at low loads, both in air and in ethanol. These observations are consistent with the low-load contact area predictions of the Johnson-Kendall-Roberts (JKR) theory, indicating that for well-ordered SAMs friction force is proportional to contact area and that the true contact area is determined by elastic deformation of the SAM by the LFM probe. In ambient air, the magnitude of the friction force measured using mixed SAMs is found to be similar to that obtained using pure SAMs at the same external load. Changing the medium to ethanol, however, leads to dramatically lower friction in the mixed SAMs. An analysis of the friction data using a thermally activated Eyring model that takes into account the monolayer viscoelasticity suggests that the better friction properties of the mixed SAMs are a consequence of greater disorder and higher molecular mobility in the outer layer/canopy. These findings indicate that multi-tiered SAM coatings comprising a highly ordered underlayer and a disordered, mobile canopy can provide the basis for low-friction coatings for small mechanical systems.     

Molecular orientation in helical and all-trans oligo(ethylene glycol)-terminated assemblies on gold: results of ab initio modeling

The structural properties of self-assembled monolayers (SAMs) of oligo(ethylene glycol) (OEG)-terminated and amide-containing alkanethiols (HS(CH(2))(15)CONH(CH(2)CH(2)O)(6)H and related molecules with shorter alkyl or OEG portions) on gold are addressed. Optimized geometry of the molecular constituents, characteristic vibration frequencies, and transition dipole moments are obtained using density-functional theory methods with gradient corrections. These data are used to simulate IR reflection-absorption (RA) spectra associated with different OEG conformations. It is shown that the positions and relative intensities of all characteristic peaks in the fingerprint region are accurately reproduced by the model spectra within a narrow range of the tilt and rotation angles of the alkyl plane, which turns out to be nearly the same for the helical and all-trans OEG conformations. In contrast, the tilt of the OEG axis changes considerably under conformational transition from helical to all-trans OEG. By means of ab initio modeling, we also clarify other details of the molecular structure and orientation, including lateral hydrogen bonding, the latter of which is readily possessed by the SAMs in focus. These results are crucial for understanding phase and folding characteristics of OEG SAMs and other complex molecular assemblies. They are also expected to contribute to an improved understanding of the interaction with water, ions, and ultimately biological macromolecules.     

Theoretical study of the structure of self-assembled monolayers of short alkylthiolates on Au(111) and Ag(111): the role of induced substrate reconstruction and chain-chain interactions

We compare the stability of various structures of high coverage self-assembled monolayers (SAMs) of short alkylthiolates, S(CH(2))(n-1)CH(3) (= C(n)), on Ag(111) and Au(111). We employ: (i) the ab initio thermodynamics approach based on density functional theory (DFT) calculations, to compare the stability of SAMs of C(1) (with coverages Θ = 3/7 and 1/3) on both substrates, and (ii) a set of pairwise interatomic potentials derived from second-order M?ller-Plesset (MP2) perturbation theory calculations, to estimate the role of chain-chain (Ch-Ch) interactions in the structure and stability of SAMs of longer chain alkylthiolates. For C(1)/Ag(111) (C(1)/Au(111)) the SAM with Θ = 3/7 is more (less) stable than for Θ = 1/3 in a wide range of temperatures and pressures in line with experiments. In addition, for the molecular densities of SAMs corresponding to Θ = 3/7 and 1/3, the MP2-based Ch-Ch interaction potential also predicts the different chain orientations observed experimentally in SAMs of alkylthiolates on Ag(111) and Au(111). Thus, for short length alkylthiolates, a simple model based on first principles calculations that separately accounts for molecule-surface (M-S) and Ch-Ch interactions succeeds in predicting the main structural differences between the full coverage SAMs usually observed experimentally on Ag(111) and Au(111).