仿生生物膜上多巴胺的电子转移过程研究

利用薄层法(TLCV)研究了硝基苯(NB)/水(W)界面上二茂铁(Fc)-多巴胺(DA)体系的电子迁移(ET)过程,得到该体系界面电子转移速率常数为1.012cm.s^-1.mol^-1.L,界面电子转移反应为单电子过程(n=0.89).采用扫描电化学显微镜(SECM)对同一体系进行研究,得到电子迁移速率常数为(1.10±0.2)cm.s^-1.mol^-1.L,两种方法所得结果吻合,证明了薄层法的可行性.同时,低的反应物浓度比又一次验证了Barker理论.     

Oxidation of ascorbate and ascorbic acid at the aqueous|organic solution interface

An electron transfer reaction between ascorbate in an aqueous solution and oxidizing agents in an organic solution immiscible with water has been studied for the first time by polarography for charge transfer at the interface between two immiscible electrolyte solutions. A reversible electron transfer polarogram at the aqueous|organic solution interface could be observed when teterachlorobenzoquinone, dibromobenzoquinone and Meldola's Blue were used as oxidizing agents in the organic solution. The oxidation reaction of ascorbate at the aqueous|organic interface was discussed comparing with the reactions at the ordinary electrodes and in homogeneous solutions. The half-wave potentials of electron transfer polarograms at the aqueous|nitrobenzene interface were applied to evaluate the formal redox potential of ascorbate/ascorbate free radical.     

Fundamentals and Applications in Electrochemistry of Liquid-liquid Interfaces

The interface of two immiscible electrolyte solutions (ITIES) has generated great interest since it can be used to understand several processes in chemistry and biology. The transfer process of ions and organic molecules of environmental and pharmacological importance have been study across the ITIES. In the present work, a small introduction to the study of ITIES is given, as well as the interpretation of the cyclic voltammetric experiments regarding to the transport of an organic cation (TEA⁺) across the interface. Finally, examples of application of studies of ITIES: a) the transfer of terbutryne herbicide and b) electron transfer reaction between a redox pair (Fe(CN)₆^4-/Fe(CN)₆³⁾ and isoperezone across the water|1,2- dichloroethane interface are discussed.     

Thin‐Film Voltammetry of a Lutetium Bisphthalocyanine at Ionic Liquid|Water Interface

At room temperature, tetraoctylphosphonium bromide is a viscous ionic liquid, this gel‐like organic phase can be cast over a basal‐plane graphite electrode (BPGE). Cyclic voltammetry at such a modified electrode, in contact with an aqueous solution have revealed one reversible oxidation and five reversible reduction steps for a Lu^III bisphthalocyanine dissolved in the ionic liquid film, a proof that the highly reactive reduced species were protected from interaction with water in this highly lipophilic phase. It has also been shown that the redox properties are influenced by the ions in the aqueous phase, a property which has been attributed to ion‐pairing effects; obviously, the ion transfers at the organic|aqueous interface has been ignored. Electrochemistry of Lu(III)[(_tBu)₄Pc]₂ (cyclic voltammetry and square wave voltammetry) under similar conditions shows that the nature and concentration of the anion in the aqueous solution in contact with the ionic liquid film influences the potential of the electrode reaction. This can be attributed to variations of the interfacial potential and also because the organic phase is an anion exchanger. Moreover, SWV experiments suggest that the rate of the overall reaction varies with the nature and concentration of the anion of the aqueous electrolyte, which implies that the ion transfer through the organic|aqueous interface is slower than the electron exchange rate of the molecule at the surface of graphite.     

Electrocatalytic Determination of Sulfite at Immobilized Microdroplet Liquid|Liquid Interfaces: The EIC′ Mechanism

Liquid|liquid interfaces provide a natural boundary and a reactive interface where an organic phase is in contact with an aqueous analyte. The selectivity of ion transfer processes at liquid|liquid interfaces can help to provide sensitivity, introduce reactive reagents, or allow analyte accumulation at the electrode surface. In this study, microdroplet deposits of the organic liquid 4‐(3‐phenylpropyl)‐pyridine (PPP) with the ferrocenylmethyl‐dodecyldimethylammonium⁺ (FDA⁺) redox system are deposited onto a basal plane pyrolytic graphite electrode and employed to transfer anions from the aqueous into the organic phase. A clear trend of more hydrophobic anions transferring more readily (at more negative potentials) is observed and an ESI‐mass spectrometry method is developed to confirm the transfer. Subsequently, the electrocatalytic oxidation of sulfite, SO₃^2?, within the organic phase and in the presence of different electrolyte anions is investigated. Competition between sulfite transfer and inert anion transfer occurs. The electrocatalytic sulfite oxidation is suppressed in the presence of PF₆^? and occurs most readily in the presence of the hydrophilic nitrate anion. The resulting process can be classified as an electrocatalytic EIC′‐process (E: electron transfer; I: ion transfer; C: chemical reaction step). The effectiveness of the electrocatalytic process is limited by i) competition during anion transfer and ii) the liquid|liquid interface acting as a diffusion barrier. The analytical sensitivity of the method is limited to ca. 100 μM SO₃^2? (or ca. 8 ppm) and potential approaches for improvement of this limit are discussed.     

Catalytic Activity of Alkali Metal Cations for the Chemical Oxygen Reduction Reaction in a Biphasic Liquid System Probed by Scanning Electrochemical Microscopy

Chemical reduction of dioxygen in organic solvents for the production of reactive oxygen species or the concomitant oxidation of organic substrates can be enhanced by the separation of products and educts in biphasic liquid systems. Here, the coupled electron and ion transfer processes is studied as well as reagent fluxes across the liquid|liquid interface for the chemical reduction of dioxygen by decamethylferrocene (DMFc) in a dichloroethane-based organic electrolyte forming an interface with an aqueous electrolyte containing alkali metal ions. This interface is stabilized at the orifice of a pipette, across which a Galvani potential difference is externally applied and precisely adjusted to enforce the transfer of different alkali metal ions from the aqueous to the organic electrolyte. The oxygen reduction is followed by H₂O₂ detection in the aqueous phase close to the interface by a microelectrode of a scanning electrochemical microscope (SECM). The results prove a strong catalytic effect of hydrated alkali metal ions on the formation rate of H₂O₂, which varies systematically with the acidity of the transferred alkali metal ions in the organic phase.     

The Solvent Effect on H2O2 Generation at Room Temperature Ionic Liquid|Water Interface

H₂O₂ is a versatile chemical and can be generated by the oxygen reduction reaction (ORR) in proton donor solution in molecular solvents or room temperature ionic liquids (IL). We investigated this reaction at interfaces formed by eleven hydrophobic ILs and acidic aqueous solution as a proton source with decamethylferrocene (DMFc) as an electron donor. H₂O₂ is generated in colorimetrically detectable amounts in biphasic systems formed by alkyl imidazolium hexafluorophosphate or tetraalkylammonium bis(trifluoromethylsulfonyl)imide ionic liquids. H₂O₂ fluxes were estimated close to liquid|liquid interface by scanning electrochemical microscopy (SECM). Contrary to the interfaces formed by hydrophobic electrolyte solution in a molecular solvent, H₂O₂ generation is followed by cation expulsion to the aqueous phase. Weak correlation between the H₂O₂ flux and the difference between DMFc/DMFc⁺ redox potential and 2 electron ORR standard potential indicates kinetic control of the reaction.     

Ion Transport Across Liquid|Liquid Interfacial Boundaries Monitored at Generator‐Collector Electrodes

Anion transfer processes at a liquid|liquid interface were studied with an interdigitated gold band array electrode. The organic phase, 4‐(3‐phenylpropyl)‐pyridine containing Co(II)phthalocyanine, was immobilised as random droplets at the electrode surface and then immersed into aqueous electrolyte. Oxidation of Co(II)phthalocyanine at the generator electrode was shown to be associated with anion transfer from the aqueous into the organic phase. The corresponding back reduction at the collector electrode with anion expulsion was delayed by the anion/cation diffusion time across the interelectrode gap. A working curve based on a finite difference numerical simulation model was employed to estimate the apparent diffusion coefficients for anions in the organic phase (PF₆^?4^?3^?). Potential applications in ion analysis are discussed.     

Supported Liquid Membrane Enrichment Studies of Natural Water Samples Applied to Liquid Chromatographic Determination of Triazine Herbicides

Abstract

A method for sample work-up and enrichment using Supported Liquid Membrane (SLM) and liquid chromatographic determination of triazine herbicides in natural waters was investigated. A porous PTFE membrane was impregnated with a water immiscible organic solvent, forming a barrier between two aqueous phases. With a flowing donor and a stagnant acceptor solution, an enrichment of the triazines was obtained. The various factors that influence the extraction efficiency and selectivity of the extraction procedure were experimentally studied. The obtained results were in good agreement with the developed theoretical model. The pH of the acceptor solution was found to be the critical limiting factor in obtaining higher extraction efficiencies and led to an extraction efficiency decrease with an increase in enrichment time. By increasing both the trapping capacity of the acceptor solution and the donor flow rate, the method detection limit of the triazines ranged from 0.03 to 0.16 μgL^?1 in natural waters with 20 minutes extraction time.     

Transfer of actinide ion at the interface between aqueous and nitrobenzene solutions studied by controlled-potential electrolysis at the interface

A novel electrochemical method based on controlled-potential electrolysis has been developed for the elucidation of the ion transfer at the interface between two immiscible electrolyte solutions (ITIES). A relationship between the applied interfacial potential (E_app) and the amount of the ion transferred (A_tr) was investigated after an electrolytic equilibrium was attained by controlled-potential electrolysis. The A_tr was determined chemically or radiometrically instead of by current measurement. It was found that (i) controlled-potential electrolysis was applicable to the study of the transfer of such hydrophilic ions as transition metal ions which gave no appreciable current within the potential window in voltammetry or polarography at ITIES, (ii) controlled-potential electrolysis in combination with a sensitive analytical method enabled a study of the transfer reaction of an ion of very dilute concentration, and (iii) even when the transfer reaction of an ion was irreversible or quasi-reversible, a standard ion transfer potential could be determined by controlled-potential electrolysis without using a kinetic parameter. The controlled-potential electrolysis method developed was applied to the transfer reactions of actinide ions such as UO₂ ²⁺ and Am³⁺ from aqueous solution to nitrobenzene solution in the absence or presence of an ionophore facilitating the transfer. The Gibbs energy for the transfer of actinide ion and a stability constant of the complex between an actinide ion and the ionophore in nitrobenzene solution were determined from log D versus E_app plots (D the ratio of the concentration of the ion in nitrobenzene solution to that in aqueous solution). The feasibility of controlled-potential electrolysis as a method for electrolytic separation of actinide ions is discussed.     

Probing TCNQ‐mediated Metal Reduction Reactions at Liquid‐liquid Interface with SECM

Metal reduction at the interface between two immiscible electrolyte solutions (ITIES) has been studied with scanning electrochemical microscopy (SECM). Metal cations in the aqueous phase are reduced by 7,7,8,8‐tetracyanoquinodimethane anion (TCNQ^?) residing in the oil phase, methyl isobutyl ketone (MIBK). TCNQ^? is formed at the SECM tip by reducing TCNQ, which results in a positive feedback loop between the tip and the ITIES when an electron is donated to a metal cation. The effect of the Galvani potential difference on the rate of the interfacial electron transfer was investigated, establishing the potential difference either by an additional substrate electrode in the aqueous phase or by an a common ion in both phases. It is shown that the Galvani potential difference as a driving force does enable TCNQ^? mediated Cu²⁺ reduction. Finite element method (FEM) simulations were run to provide information on the reaction kinetics and stoichiometry.     

Electrochemical evidence of catalysis of oxygen reduction at the polarized liquid–liquid interface by tetraphenylporphyrin monoacid and diacid

Cyclic voltammetry is used to study the role of 5,10,15,20-tetraphenyl-21H,23H-porphine (H₂TPP) in the reduction of molecular oxygen by decamethylferrocene (DMFc) at the polarized water|1,2-dichloroethane (DCE) interface. It is shown that this rather slow reaction proceeds remarkably faster in the presence of tetraphenylporphyrin monoacid (H₃TPP⁺) and diacid (H₄TPP²⁺), which are formed in DCE by the successive transfer of two protons from the acidified aqueous phase. A mechanism is proposed, which includes the formation of adduct between H₃TPP⁺ or H₄TPP²⁺ and O₂ that is followed by electron transfer from DMFc to the adduct leading to the observed production of DMFc⁺ and to the regeneration of H₂TPP or H₃TPP⁺, respectively.     

Transport of selenite through a solid supported liquid membrane using sodium diethyldithiocarbamate,Na(DDTC), as carrier between hydrochloric acid solutions

The complex formation between Se(IV) and Na(DDTC) has been exploited to carry out the transport of selenite through an SSLM. The differences of solubilities of the related complex in aqueous and in organic kerosene solution along with the additional effect of H₂O₂ have provided the conditions for such transport.In this case, the study reveals that transport of selenite is effectively facilitated by DDTC. It has been determined that the concentration of HCl in the stripping solution has an optimum value around 2.0 M. The presence of H₂O₂ in the stripping solution is necessary to accomplish the mass transfer of selenite. The role of this reagent has been investigated.The transport has shown to be selective for Se(IV) and Cu²⁺ in the presence of Mg²⁺, Fe³⁺ and Ca²⁺     

The phase transfer mechanism of 18-molybdophosphate anion at the water/nitrobenzene interface

The phase transfer mechanism of 18-molybdophosphate anion at the water/nitrobenzene interface has been investigated by chronopotentiometry with cyclic linear current-scanning (CLC) and cyclic voltammetry (CV). The transfer species is 18-molybdophosphtae anion with a charge number of 4, H₂[P₂Mo₁₈O₆₂]^4-. The transfer process is controlled by diffusion at a slow polarization rate and considerably influenced by pH of the aqueous phase. The stable forms and pH range of the heteropoly anion in the aqueous solution can be directly confirmed through voltammetric behavior. The theoretical analysis of the relationship between the transfer potential and solution pH is identical to the experimental results. The linear concentration relationship with the transfer peak current is suggested to be used in the determination of heteropoly acids (salts).     

薄层法研究十二烷基苯磺酸钠对硝基苯/水界面电子转移的影响

用薄层法研究了阴离子表面活性剂十二烷基苯磺酸钠(SDBS)对硝基苯/水界面电子转移的影响. 实验结果表明, 随着水相中十二烷基苯磺酸钠浓度的增加, 有机相中十甲基二茂铁(DMFc)和水相中Fe(CN)₆^3-发生的界面双分子反应的阴极平台电流呈现递减趋势, 但是界面双分子反应速率常数却呈递增趋势. 这是由于阴离子表面活性剂十二烷基苯磺酸钠在硝基苯/水界面形成了修饰层, 影响了界面双电层结构. SDBS在液/液界面的吸附为Langmuir吸附.     

Platinum Nanoparticle Impacts at a Liquid|Liquid Interface

Single nanoparticle (NP) electrochemistry detection at a micro liquid|liquid interface (LLI) is exploited using the catalyzed oxygen reduction reaction (ORR). In this way, current spikes reminiscent of nanoimpacts were recorded, which corresponded to electrocatalytic enhancement of the ORR by Pt NPs. The nature of the LLI allows exploration of new phenomena in single NP electrochemistry. The recorded impacts result from a bipolar reaction occurring at the Pt NP straddling the LLI. O₂ reduction takes place in the aqueous phase, while ferrocene hydride (Fc‐H⁺; a complex generated upon facilitated interfacial proton transfer by Fc) is oxidized in the organic phase. Ultimately, the role of reactant partitioning, NP bouncing, or the ability of NPs to induce Marangoni effects, is demonstrated.     

Detection of hydrogen peroxide produced at a liquid/liquid interface using scanning electrochemical microscopy

Scanning electrochemical microscopy (SECM) was used to monitor in situ hydrogen peroxide (H₂O₂) produced at a polarized water/1,2-dichloroethane (DCE) interface. The water/DCE interface was formed between a DCE droplet containing decamethylferrocene (DMFc) supported on a solid electrode and an acidic aqueous solution. H₂O₂ was generated by reducing oxygen with DMFc at the water/DCE interface, and was detected with a SECM tip positioned in the vicinity of the interface using a substrate generation/tip collection mode. This work shows unambiguously how the H₂O₂ generation depends on the polarization of the liquid/liquid interface, and how proton-coupled electron transfer reactions can be controlled at liquid/liquid interfaces.     

Measurement of the forward and back rate constants for electron transfer at the interface between two immiscible electrolyte solutions using scanning electrochemical microscopy (SECM): Theory and experiment

A new numerical model is developed for the scanning electrochemical microscopy (SECM) feedback mode for reversible electron transfer (ET) processes at the interface between two immiscible electrolyte solutions (ITIES). Results from this model were compared with data obtained using an earlier SECM feedback model in which the back reaction was not considered, to identify when the latter will be important. The dependence of the ET rate constant for the oxidation of 7,7,8,8-tetracyanoquinodimethane radical anion (TCNQ⁻) in 1,2-dichloroethane (DCE) by aqueous ferricyanide on the interfacial potential drop (Δ_w^oφ) was studied using SECM. The Δ_w^oφ value was varied by changing the concentration of NaClO₄ in the aqueous phase while a fixed concentration of organic electrolyte, tetra-n-hexylammonium perchlorate, was used in the DCE phase. The results obtained were compared to earlier published studies on the forward reaction between TCNQ in DCE and aqueous ferrocyanide. Both the forward and back ET rate constants were found to depend strongly on the interfacial potential drop, with measured ET coefficients in the region of 0.5–0.6. A similar ET rate constant was observed at zero driving force for both the forward and back reactions. These experimental results suggest that the Butler–Volmer model applies to ET at the ITIES, when the driving force for the reaction is low, and under conditions of relatively high ionic strength in both the aqueous and organic phases.     

Evaluation of Gibbs free energy for the transfer of a highly hydrophilic ion from an acidic aqueous solution to an organic solution based on ion pair extraction

A method to determine the standard Gibbs free energy for the transfer, ΔG°_tr, of a highly hydrophilic metal ion from an aqueous solution, W, in the presence of high concentration of H⁺ to an organic solution, O, was proposed based on the theoretical consideration of the distribution process of ions between W and O. The usefulness of the proposed method was verified experimentally by comparing ΔG°_tr of Mg²⁺ determined by the method with that obtained by voltammetry for the ion transfer at the W|O interface. The O examined were nitrobenzene (NB) and 1,2-dichloroethane (DCE). By applying the proposed method, ΔG°_tr of NpO₂⁺, UO₂²⁺, NpO₂²⁺ and PuO₂²⁺ from an acidic W to NB were determined.     

The Role of Interfacial Reactions in Determining Plasma–Liquid Chemistry

In this work, we investigate the production of highly oxidative species in solutions exposed to a self-pulsed corona discharge in air. We examine how the properties of the target solution (pH, conductivity) and the discharge power affect the discharge stability and the production of H₂O₂. Indigo carmine, a common organic dye, is used as an indicator of oxidative strength and in particular, hydroxyl radical (OH^·) production. The observed rate of indigo oxidation in contact with the discharge far exceeds that predicted from reactions based on concentrations of species measured in the bulk solution. The generation of H₂O₂ and the oxidation of indigo carmine indicate a high concentration of highly oxidizing species such as OH^· at the plasma–liquid interface. These results indicate that reactions at the air plasma–liquid interface play a dominant role in species oxidation during direct non-equilibrium atmospheric pressure plasma treatment.