Modeling reactive blending: An experimental approach

We present an experimental study of polymer–polymer reaction kinetics at the interfaces between two immiscible polymer phases under flow in a batch mixer of type Haake Rheocord. To that end, we have developed a model chemical system that is composed of a mixture of polystyrene (PS) and poly(methyl methacrylate) (PMMA). A small fraction of PS bear hydroxyl terminal group (PS-OH) and that of PMMA contain nonclassical isocyanate moieties that are randomly distributed along the PMMA chains (PMMA-r-NCO). This reactive system is particularly pertinent to modeling practical reactive blending processes because the amount and rate of copolymer formation can be determined with great accuracy (on the order of ppm). This study shows that the overall reaction rate is controlled primarily by interfacial generation through convective mixing. Most reaction and morphological development are accomplished within a very short period of time (1–3 min). For a PS/PMMA (60/40) reactive blend, the ultimate size of the PMMA particles is as small as 0.2 μm and is reached within 2 to 3 min. A surface coverage of about 0.5 of the PMMA particles by a monolayer of the copolymer is enough to prevent dynamic coalescence, whereas a much higher surface coverage is needed to eliminate static coalescence. In the nonentangled regime (M_n of the PS-OH = 7800 g/mol), temperature has a significant effect on the reaction rate, while it has little effect in the entangled regime (M_n of the PS-OH = 53,200 g/mol). © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2153–2163, 1998     

Synthesis of highly dispersed,block copolymer‐grafted TiO2 nanoparticles within neat block copolymer films

The objective of the study is to formulate exclusive block copolymer (BCP) nanocomposites by dispersing bcp end‐grafted nanoparticles (bcp‐g‐nps) of PMMA‐b‐PS‐g‐TiO₂ within PS‐b‐PMMA matrix. PMMA‐b‐PS‐g‐TiO₂ is synthesized using a “grafting‐to” approach and characterized by XPS and TGA to establish that the copolymer chains were bonded to NPs. Good dispersion of bcp‐g‐nps in PMMA and PS‐PMMA bcp films is observed, in contrast to poor dispersion in PS films. In PS‐PMMA films, the compatible and identical bcp nature of the end‐grafted polymer, and large NP size caused it to span across entire PS‐PMMA domains. Poor and good dispersion in PS and PMMA matrices, respectively, can be rationalized by the fact that NPs interactions are driven by the PMMA at the outer corona of the bcp‐g‐nps. Developing bcp‐g‐nps as a strategic route to preparation of highly dispersed high permittivity NPs like titanium dioxide (TiO₂) in bcp matrix can have important ramifications for energy storage devices. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 468–478     

Substituted propenyl end groups as reactive intermediates in radical polymerization

The addition of propagating radicals of methyl acrylate (MA) and styrene (St) to CH₂?C(CO₂CH₃)CH₂? and CH₂?C(C₆H₅)CH₂? ω‐end groups of poly(methyl methacrylate) (PMMA) and polystyrene (PSt) was investigated. The end groups were as reactive as MA and St toward the poly(methyl acrylate) (PMA) and PSt radicals, respectively. The adduct radical derived from the two types of PMMA end groups and PMA radicals underwent β fragmentation exclusively to yield PMMA radicals and end groups bound to PMA chains. The addition of PSt radicals to PMMA with CH₂?C(CO₂Me)CH₂? end groups resulted in adduct radicals that underwent β fragmentation and addition to St or coupling with PSt radicals. Adduct radicals formed by the addition of PMA radicals to both types of end groups of PSt exclusively formed C? C bond by coupling with PMA radicals to form branched structures or by addition to MA monomer to give a copolymer. The fate of the adduct radicals was highly dependent on the type of polymer chain and the substituent bound to the end group. Steric congestion of the adduct radical arising from the α‐methyl group of the PMMA chain was considered to be crucial for fragmentation to expel the PMMA radical. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 645–654, 2003     

A partial phase diagram for a mixture of polystyrene with a low molecular weight styrene-dimethylsiloxane block copolymer

Differential scanning calorimetry (DSC) was used to examine the miscibility of polystyrene (PS), mol. wt. 10⁵, with a phase-separated styrene-dimethylsiloxane (S-DMS) diblock copolymer, M_n = 3800, 86 wt% S. Mixtures whose S content varied from 4 to 96 wt% PS were examined at a 10 K min^?1 heating rate following a 200 K min^?1 cooling rate from temperatures varying from 403 to 573 K. At some compositions, two glass transition temperatures, T_gs, corresponding to PS transitions were observed; at others only a single T_g was observed. When it was assumed that the 200 K min^?1 cooling rate corresponded to quenching from the starting temperature, and when the heat capacity changes at the S glass transitions were used to calculate the percentage of S repeat units undergoing each glass transition, it was possible to calculate an approximate partial phase diagram for this mixture. At 96 wt% PS, there was evidence for a small amount of mixed S phase, possibly block copolymer micelles, in equilibrium with PS; from about 60 to 90 wt% PS, the S repeat units from the block copolymer appeared to be completely mixed with the PS. At lower wt% PS, unmixed block copolymer was in equilibrium with block copolymer whose S segments were mixed with the PS. The phase diagram appeared to vary only slightly with temperature.     

Reactively and physically compatibilized immiscible polymer blends: stability of the copolymer at the interface

This paper reports on the interfacial behaviour of block and graft copolymers used as compatibilizers in immiscible polymer blends. A limited residence time of the copolymer at the interface has been shown in both reactive blending and blend compatibilization by preformed copolymers. Polystyrene (PS)/polyamide6 (PA6), polyphenylene oxide (PPO)/PA6 and polymethylmethacrylate (PMMA)/PA6 blends have been reactively compatibilized by a styrene-maleic anhydride copolymer SMA. The extent of miscibility of SMA with PS, PPO and PMMA is a key criterion for the stability of the graft copolymer at the interface. For the first 10 to 15 minutes of mixing, the in situ formed copolymer is able to decrease the particle size of the dispersed phase and to prevent it from coalescencing. However, upon increasing mixing time, the copolymer leaves the interface which results in phase coalescence. In PS/LDPE blends compatibilized by preformed PS/hydrogenated polybutadiene (hPB) block copolymers, a tapered diblock stabilizes efficiently a co-continuous two-phase morphology, in contrast to a triblock copolymer that was unable to prevent phase coarsening during annealing at 180°C for 150 minutes.     

Influence of Reactive Compatibilization on the Morphology of Polypropylene/Polystyrene Blends

To study the efficiency of different mechanisms for reactive compatibilization of polypropylene/polystyrene blends (PP/PS blends), main chain or terminal-functionalized PP and terminal-functionalized PS have been synthesized by different methods. While the in-situ block and graft copolymer formation results in finer phase morphologies compared to the corresponding non-reactive blends, the morphology development in the ternary blend system PP/PS + HBP (hyperbranched polymer) is a very complex process. HBP with carboxylic acid end groups reacts preferably with the reactive sites of the oxazoline functionalized PS (PS-Ox) and locates mainly within the dispersed PS-Ox phase. A bimodal size distribution of the PS-Ox particles within the oxazoline modified PP (PP-Ox) matrix phase is observed with big PS-Ox particles (containing the HBP as dispersed phase) and small PS-Ox particles similar in size to the unimodal distributed particles in the non-reactive PP-Ox/PS-Ox blends. Factors influencing the morphology are discussed.     

Synthesis of methyl methacrylate,styrene, and isobutylene multiblock copolymers using atom transfer and cationic polymerization

ABCBA‐type pentablock copolymers of methyl methacrylate, styrene, and isobutylene (IB) were prepared by the cationic polymerization of IB in the presence of the α,ω‐dichloro‐PS‐b‐PMMA‐b‐PS triblock copolymer [where PS is polystyrene and PMMA is poly(methyl methacrylate)] as a macroinitiator in conjunction with diethylaluminum chloride (Et₂AlCl) as a coinitiator. The macroinitiator was prepared by a two‐step copper‐based atom transfer radical polymerization (ATRP). The reaction temperature, ?78 or ?25 °C, significantly affected the IB content in the resulting copolymers; a higher content was obtained at ?78 °C. The formation of the PIB‐b‐PS‐b‐PMMA‐b‐PS‐b‐PIB copolymers (where PIB is polyisobutylene), prepared at ?25 (20.3 mol % IB) or ?78 °C (61.3 mol % IB; rubbery material), with relatively narrow molecular weight distributions provided direct evidence of the presence of labile chlorine atoms at both ends of the macroinitiator capable of initiation of cationic polymerization of IB. One glass‐transition temperature (T_g), 104.5 °C, was observed for the aforementioned triblock copolymer, and the pentablock copolymer containing 61.3 mol % IB showed two well‐defined T_g's: ?73.0 °C for PIB and 95.6 °C for the PS–PMMA blocks. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3823–3830, 2005     

Development and characterization of reactive extruded PVC/polyacrylate blends

This paper describes a method to obtain polymer blends by the absorption of a liquid solution of monomer, initiator, and a crosslinking agent in suspension type porous poly(vinyl chloride) (PVC) particles, forming a dry blend. These PVC/monomer dry blends are reactively polymerized in a twin‐screw extruder to obtain the in situ polymerization in a melt state of various blends: PVC/poly(methyl methacrylate) (PVC/PMMA), PVC/poly(vinyl acetate) (PVC/PVAc), PVC/poly(butyl acrylate) (PVC/PBA) and PVC/poly(ethylhexyl acrylate) (PVC/PEHA). Physical PVC/PMMA blends were produced, and the properties of those blends are compared to reactive blends of similar compositions. Owing to the high polymerization temperature (180°C), the polymers formed in this reactive polymerization process have low molecular weight. These short polymer chains plasticize the PVC phase reducing the melt viscosity, glass transition and the static modulus. Reactive blends of PVC/PMMA and PVC/PVAc are more compatible than the reactive PVC/PBA and PVC/PEHA blends. Reactive PVC/PMMA and PVC/PVAc blends are transparent, form single phase morphology, have single glass transition temperature (T_g), and show mechanical properties that are not inferior than that of neat PVC. Reactive PVC/PBA and PVC/PEHA blends are incompatible and two discrete phases are observed in each blend. However, those blends exhibit single glass transition owing to low content of the dispersed phase particles, which is probably too low to be detected by dynamic mechanical thermal analysis (DMTA) as a separate T_g value. The reactive PVC/PEHA show exceptional high elongation at break (～90%) owing to energy absorption optimized at this dispersed particle size (0.2–0.8 µm). Copyright © 2005 John Wiley & Sons, Ltd.     

Interface stabilization and micelle formation in blends with a block copolymer

The phase separation behavior of ternary blends of two homopolymers, PMMA and PS, and a block copolymer of styrene and methylmethacrylate, P(S-b-MMA), was studied. The homopolymers were of equal chain length and were kept at equal amounts. Two copolymers were used with blocks of equal length, which exceeded or equaled that of the homopolymer chains. Varied was the copolymer contentf. Films were cast from toluene, which is a nonselective solvent. The morphologies of the cast films were compared with the structure of the critical fluctuations in solution, which were calculated in mean field approximation. The axis of blend compositionsf can be divided into parts of dominating macrophase and microphase separation. Above a transition concentrationf _o, all copolymer chains are found in phase interfaces. Belowf _o, part of them form micelles within the homopolymer phases.     

Morphology of reactive PP/PS blends with hyperbranched polymers

To study the efficiency of different mechanism for reactive compatibilization of polypropylene/polystyrene (PP/PS) blends main chain or terminal functionalized PP and terminal functionalized PS have been synthesized by different methods. While the in-situ block and graft copolymer formation results in finer phase morphologies compared to the corresponding non-reactive blends, the morphology development in the ternary blend system PP/PS + HBP (hyperbranched polymer) is a very complex process. HBP with carboxylic acid endgroups reacts preferably with the reactive sites of the oxazoline functionalized PS (PS-Ox) and locates mainly within the dispersed PS-Ox phase. A bimodal size distribution of the PS-Ox particles within the oxazoline modified PP (PP-Ox) matrix phase is observed with big PS-Ox particles (containing the HBP as dispersed phase) and small PS-Ox particles similar in size like the unimodal distributed particles in the non-reactive PP-Ox/PS-Ox blends. Factors influencing the morphology are discussed.     

Synthesis of poly(methyl methacrylate)‐b‐polystyrene containing a crown ether unit at the junction point via combination of atom transfer radical polymerization and nitroxide mediated radical polymerization routes

Poly(methyl methacrylate)‐b‐polystyrene (PMMA‐b‐PS) containing a benzo‐15‐crown‐5 unit at the junction point was prepared by combining atom transfer radical polymerization and nitroxide‐mediated radical polymerization. For this purpose, 6,7,9,10,12,13,15,16‐octahydro‐5,8,11,14,17‐pentaoxa‐benzocyclopentadecene‐2‐carboxylic acid 3‐(2‐bromo‐2‐methyl‐propionyloxy)‐2‐methyl‐2‐[2‐phenyl‐2‐(2,2,6,6‐tetramethyl‐piperidin‐1‐yloxy)‐ethoxycarbonyl]‐propyl ester ( 3 ) was synthesized and used as an initiator in atom transfer radical polymerization of methyl methacrylate in the presence of CuCl and pentamethyldiethylenetriamine at 60°C. A linear behavior was observed in both plots of ln([M]₀/[M]) versus time and M_n,_GPC versus conversion indicating that the polymerization proceeded in a controlled/living manner. Thus obtained PMMA precursor was used as a macroinitiator in nitroxide‐mediated radical polymerization of styrene (St) at 125°C to give well‐defined PMMA‐b‐PS with crown ether per chain. Kinetic data were also obtained for copolymerization. Moreover, potassium picrate (K⁺ picrate) complexation of 3 and PMMA‐b‐PS copolymer was studied. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3242–3249, 2006     

Compatibility of a statistical copolymer p(EMA-CO-MMA) with PS and PMMA

The compositions of coexisting phases and the interface widths in blends of a statistical copolymer of poly(ethylmethacrylate — co — methylmethacrylate) (P(EMA_1,x-co-MMA_x)) and a deuterated polystyrene (PS(D)) as well as a deuterated poly(methylmethacrylate) (PMMA(D)) have been investigated by neutron reflectometry (NR). Interaction parameters are calculated from the compositions of coexisting phases and the interface width values. Utilizing a novel two dimensional scheme for graphical representation of the interaction parameters, the results are in very good agreement with studies on the interaction parameters for PS/PMMA, PS/PEMA and PEMA/PMMA blends. In particular, X_EMA/MMA deduced from a NR experiment on a P(EMA-block-MMA(D)) diblock copolymer fits excellent into the scheme.     

Poly(ethylene-co-vinyl alcohol) and poly(methyl methacrylate) blends: Phase behavior and morphology

In this work blends of poly(ethylene-co-vinyl alcohol) (EVOH) with different ethylene contents (27, 32, 38 and 44 mol%) and poly(methyl methacrylate) (PMMA) were prepared by mechanical mixing in the melted state. The miscibility and melting behavior as a function of blend composition and the ethylene content in EVOH copolymers were investigated by means of differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). The morphology of the cryofractured surfaces was examined by scanning electron microscopy (SEM). DSC and DMTA data show that EVOH/PMMA blends are immiscible, independent of EVOH and blend composition. The SEM analysis in agreement with DMTA analysis indicates that the morphology of phases depends on the blend composition, with phase inversion occurring as the concentration of one or other polymer component increases. However, the copolymer composition apparently does not affect the domain size distribution for blends containing 20 wt% of EVOH or 20 wt% of PMMA. A better phase adhesion is observed mainly for blends with 50 wt% of each polymer component.     

Use of block copolymer-stabilized cadmium sulfide quantum dots as novel tracers for laser scanning confocal fluorescence imaging of blend morphology in polystyrene/poly(methyl methacrylate) films

This paper describes the first use of polymer-coated quantum dots (QDs) as fluorescent tracers for LSCFM imaging of phase morphology in polymer blends. Cadmium sulfide (CdS) QDs stabilized at the surface with a PS-b-PAA block copolymer are shown to be well dispersed via their polystyrene (PS) brush layer in the PS phase of solvent-cast 40/60 (w/w) PS/PMMA blends. The QDs are excluded from the PMMA phase, providing excellent fluorescence contrast for LSCFM imaging of the phase-separated blends. The presence of PS-b-PAA-stabilized QDs does not appear to affect the blend morphology, since the observed morphologies are the same when the percentage of QDs within the PS phase is varied from 10 to 50 wt %. These QD fluorescent tracers are used to characterize several aspects of blend morphology in solvent-cast 40/60 PS/PMMA blends containing PS homopolymer with either 100 (low molecular weight) or 1250 (high molecular weight) repeat units. In the PS(1250)/PMMA blends, a percolating distribution of PMMA droplets (2-25 mum) in a PS matrix is observed in the bulk, and a distinct inversion in the continuous phase is found near the glass substrate. In the PS(100)/PMMA blends, a "phase-in-phase" morphology is found, consisting of large PS domains (20-100 mum) dispersed in a PMMA continuous phase and small PMMA domains (1-2 mum) scattered throughout the larger PS droplets. The observed change in blend structure is attributed to a lower interfacial tension for the lower molecular weight PS.     

Synthesis of a ‐shaped amphiphilic block copolymer by the combination of atom transfer radical polymerization and living anionic polymerization

The functionalization of monomer units in the form of macroinitiators in an orthogonal fashion yields more predictable macromolecular architectures and complex polymers. Therefore, a new ‐shaped amphiphilic block copolymer, (PMMA)₂–PEO–(PS)₂–PEO–(PMMA)₂ [where PMMA is poly(methyl methacrylate), PEO is poly (ethylene oxide), and PS is polystyrene], has been designed and successfully synthesized by the combination of atom transfer radical polymerization (ATRP) and living anionic polymerization. The synthesis of meso‐2,3‐dibromosuccinic acid acetate/diethylene glycol was used to initiate the polymerization of styrene via ATRP to yield linear (HO)₂–PS₂ with two active hydroxyl groups by living anionic polymerization via diphenylmethylpotassium to initiate the polymerization of ethylene oxide. Afterwards, the synthesized miktoarm‐4 amphiphilic block copolymer, (HO–PEO)₂–PS₂, was esterified with 2,2‐dichloroacetyl chloride to form a macroinitiator that initiated the polymerization of methyl methacrylate via ATRP to prepare the ‐shaped amphiphilic block copolymer. The polymers were characterized with gel permeation chromatography and ¹H NMR spectroscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 147–156, 2007     

Compatibilizing effect of a graft copolymer on bacterial poly(3‐hydroxybutyrate)/poly(methyl methacrylate) blends

Blends of isotactic (natural) poly(3‐hydroxybutyrate) (PHB) and poly(methyl methacrylate) (PMMA) are partially miscible, and PHB in excess of 20 wt % segregates as a partially crystalline pure phase. Copolymers containing atactic PHB chains grafted onto a PMMA backbone are used to compatibilize phase‐separated PHB/PMMA blends. Two poly(methyl methacrylate‐g‐hydroxybutyrate) [P(MMA‐g‐HB)] copolymers with different grafting densities and the same length of the grafted chain have been investigated. The copolymer with higher grafting density, containing 67 mol % hydroxybutyrate units, has a beneficial effect on the mechanical properties of PHB/PMMA blends with 30–50% PHB content, which show a remarkable increase in ductility. The main effect of copolymer addition is the inhibition of PHB crystallization. No compatibilizing effect on PHB/PMMA blends with PHB contents higher than 50% is observed with various amounts of P(MMA‐g‐HB) copolymer. In these blends, the graft copolymer is not able to prevent PHB crystallization, and the ternary PHB/PMMA/P(MMA‐g‐HB) blends remain crystalline and brittle. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1390–1399, 2002     

Flory状态方程理论研究PS/PMMA/SAN相行为

将改进的Flory状态方程理论(EOS)引入含“分子内链段排斥性相互作用”的高分子共混物中,研究含无规共聚物的三元共混体系聚苯乙烯(PS)/聚甲基丙烯酸甲酯(PMMA)/聚苯乙烯-丙烯腈(SAN)无规共聚物的相行为,建立相应的适用于含无规共聚物三元共混体系Spinodal方程.用PS、PMMA、PAN的特征参数及其链段间相互作用参数分别计算相应共聚物的特征参数,由二元相互作用模型计算均聚物-共聚物间的相互作用能参数.在运用EOS理论研究三元均聚物共混体系相行为基础上,进一步预测PS/PMMA/SAN体系的相行为,计算并绘制不同温度下的Spinodal曲线并进行实验验证,理论计算与实验结果吻合.结果表明,EOS理论可以克服经典平均场理论的缺陷,成功描述含分子内排斥作用共混体系相行为与共聚物组成及温度之间的关系.     

H‐shaped (ABCDE type) quintopolymer via click reaction [3 + 2] strategy

H‐shaped quintopolymer containing different five blocks: poly(ε‐caprolactone) (PCL), polystyrene (PS), poly(ethylene glycol) (PEG), and poly(methyl methacrylate) (PMMA) as side chains and poly(tert‐butyl acrylate) (PtBA) as a main chain was simply prepared from a click reaction between azide end‐functionalized PCL‐PS‐PtBA 3‐miktoarm star terpolymer and PEG–PMMA‐block copolymer with alkyne at the junction point, using Cu(I)/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as a catalyst in DMF at room temperature for 20 h. The H‐shaped quintopolymer was obtained with a number–average molecular weight (M_n) around 32,000 and low polydispersity index (M_w/M_n) 1.20 as determined by GPC analysis in THF using PS standards. The click reaction efficiency was calculated to have 60% from ¹H NMR spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4459–4468, 2008     

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry investigations of polystyrene and poly(methyl methacrylate) produced by monoacylphosphine oxide photoinitiation

The chain-end-group composition was determined by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) analyses of low-molecular-weight polystyrene (PS) and poly(methyl methacrylate) (PMMA) produced by free-radical polymerization with a monoacylphosphine oxide, (2,4,6-trimethylbenzoyl) diphenylphosphine oxide (TPO), as a photoinitiator. Gel permeation chromatography (GPC) fractionation of the PS and PMMA samples with initial polydispersities of 1.81 and 2.81, respectively, yielded improved MALDI-TOF MS spectra. Spectral analyses of the PS fractions showed distributions attributable to PS having two diphenylphosphinyl ends and PS having one diphenylphosphinyl end and/or one 2,4,6-trimethylbenzoyl end, indicating that a combination of PS radicals with the highly reactive diphenylphosphine oxide group at one end of the chains was the predominant mode of termination. MALDI-TOF MS results for PMMA fractions provided evidence for termination primarily by disproportionation, but structure determination was confounded by the presence of isobaric peaks. Discernible peaks were obtained by MALDI-TOF MS analyses of GPC fractions of TPO-initiated poly(methyl-d₃ methacrylate-d₅), in which the major product was PMMA with a diphenylphosphinyl end group and an abstracted deuterium end group, whereas the minor combination product had two diphenylphosphinyl chain ends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2161–2171, 2007     

Local forms of molecular mobility in copolymethacrylates containing side‐chain nonlinear optical chromophores

Local forms of molecular mobility of comb‐like random copolymethacrylates, containing side‐chain nonlinear optical chromophores and amyl‐ or octafluoroamyl‐groups, are studied. In the glassy state, two relaxation processes are found, which are due to reorientation of terminal polar groups (γ₂‐process) and rotation of chromophore groups about their long axes (β‐process). For octafluoroamyl‐containing copolymers, the γ₂‐process is superposition of the two molecular motions due to reorientation of terminal chromophore groups and ? CF₂H groups. The intensity and relaxation times in the range of the γ₂‐process depend on the chemical structure and concentration of chromophores in a copolymer. For the β‐process, the molecular mobility weakly depends on the chromophore structure, being mainly determined by the relative lengths of the rigid chromophore and flexible side chains. On the global spectrum of depolarization current it was observed the γ₁‐process due to reorientation of (CH₂)_n spacers between chromophore groups and copolymer backbone. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1488–1496, 2008