Morphologically controlled synthesis of copper oxides and their catalytic applications in the synthesis of propargylamine and oxidative degradation of methylene blue

Alcohol/nonionic polymeric surfactant assisted, morphologically controlled synthesis is developed for micro-/nanostructured crystalline copper oxide. Materials were characterized by a complementary combination of X-ray diffraction (XRD), nitrogen sorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) and UV-visible spectroscopy. XRD and FT-IR confirm the formation of a mixture of Cu(OH)₂ and CuO after 0.5 h of hydrothermal treatment and pure CuO after 2 h of hydrothermal treatment. The formation mechanisms were proposed based on the SEM and TEM analysis, which show that both, alcohol/polymeric surfactant and hydrothermal time play an important role in tuning the morphology and structure of CuO. Surface area of metal oxides depends on the alcohols and the nonionic polymeric surfactants used in the synthesis. Surface area of CuO synthesized using methanol was found to be the highest. The catalytic activity of as-synthesized CuO was demonstrated by using three-component coupling reaction in the synthesis of propargylamine and catalytic oxidation of methylene blue in the presence of hydrogen peroxide. Among the CuO prepared in this study, the CuO synthesized using methanol exhibited better catalytic activity (propargylamine yield (64.5%)) and the highest rate of methylene blue degradation (13 × 10⁻³ min⁻¹).     

Fluoride-Promoted Ligand Exchange in Diaryliodonium Salts

Diaryliodonium salts are shown to undergo rapid, fluoride-promoted aryl exchange reactions at room temperature in acetonitrile. Aryl exchange is shown to be exquisitely sensitive to the concentration of fluoride ion in solution; fast exchange is observed as the fluoride concentration approaches a stoichiometric amount at 50 mM substrate concentration. The reaction is slowed, but not halted if benzene is the solvent, indicating that free fluoride ion or a four-coordinate anionic I(III) species may be responsible for the exchange. The fluoride-promoted aryl exchange reaction is general and allows direct measurement of the relative stabilities of diaryliodonium salts featuring different aryl substituents. The aryl exchange reaction may be of practical use for the preparation of hitherto inaccessible diaryliodonium salts, thus it also has implications for labeling radiotracers for molecular imaging with ¹⁸F-fluoride (t_1/2 = 109.7 min).     

Non-enzymatic electrochemical CuO nanoflowers sensor for hydrogen peroxide detection

The electrocatalytic activity of a CuO flower-like nanostructured electrode was investigated in terms of its application to enzyme-less amperometric H₂O₂ sensors. The CuO nanoflowers film was directly formed by chemical oxidation of copper foil under hydrothermal condition and then used as active electrode material of non-enzymatic electrochemical sensors for H₂O₂ detection under alkaline conditions. The sensitivity of the sensor with CuO nanoflowers electrode was 88.4 μA/mM cm² with a linear response in the range from 4.25 × 10⁻⁵ to 4 × 10⁻² M and a detection limit of 0.167 μM (S/N = 3). Excellent electrocatalytic activity, large surface-to-volume ratio and efficient electron transport property of CuO nanoflowers electrode have enabled stable and highly sensitive performance for the non-enzymatic H₂O₂ sensor.     

Microwave-accelerated Claisen rearrangement in bicyclic imidazolium [b-3C-im][NTf2] ionic liquid

With microwaves, a chemically stable ionic liquid [b-3C-im][NTf₂] recently developed in our laboratory was used as solvent and successfully applied to accelerate Claisen rearrangement reactions at high temperatures. In the presence of Lewis acid MgCl₂, these thermal rearrangements could be achieved in similar reaction times but at lower temperature. For the microwaved reactions studied in this work, without scarifying isolated yields, the reaction times were significantly reduced from hours (by conventional heating) to ≤3 min. Our result also demonstrated that [b-3C-im][NTf₂] ionic liquid was a useful solvent substitute and could be recycled multiple times for the studied rearrangement reaction at elevated temperatures.     

An efficient Negishi cross-coupling reaction catalyzed by nickel(II) and diethyl phosphite

A combination of diethyl phosphite-DMAP and Ni(II) salts forms a very effective catalytic system for the cross-coupling reactions of arylzinc halides with aryl, heteroaryl, and alkenyl bromides, chlorides, triflates, and nonaflates. The choice of solvent is quite important and the mixture of THF-N-ethylpyrrolidinone (NEP) (8:1) was found to be optimal. The reaction usually requires only 0.05 mol % of NiCl₂ or Ni(acac)₂ as catalyst and proceeds at room temperature within 1-48 h.     

Hexafluorosilicates of bis(carboxypyridinium) and bis(2-carboxyquinolinium)

The preparation and characterization of three isomeric carboxypyridinium and carboxyquinolinium hexafluorosilicate salts is described. The salts of the general formulas (LH)₂[SiF₆] (I-III, L = 2-carboxypyridine, 3-carboxypyridine, 4-carboxypyridine) and (LH)₂[SiF₆]·2H₂O (IV, L = 2-carboxyquinoline) were prepared from the protonation reaction of the corresponding pyridine carbonic acid by the fluorosilicic acid. The compounds were characterized by IR, mass-spectrometry, thermogravimetric analysis, solubility data, and in the case of III by X-ray crystallography. The relationship between the salts solubility and the H-bonding system was analysed.     

A novel method of non-violent dissolution of sodium metal in a concentrated aqueous solution of Epsom salt

A new technique of non-violent and fast dissolution of sodium metal in a concentrated aqueous solution of Epsom salt (MgSO₄.7H₂O) at room temperature (RT) has been developed. The dissolution process is mildly exothermic but could be carried out even in a glass beaker in air under swift stirring condition. The reaction products consist of mixed salts of MgSO₄ and Na₂SO₄ as well as Mg(OH)₂ which are only mildly alkaline and hence are non-corrosive and non-hazardous unlike NaOH. A 50 mL solution having Epsom salt concentration of 2 M was found to give the optimal composition for disposal of 1 g of sodium. Supersaturated (>2.7 M), as well as dilute (<1.1 M) solutions, however, cause violent reactions and hence should be avoided. Repeated sodium dissolution in Epsom solution produced a solid waste of 4.7 g per g of sodium dissolved which is comparable with the waste (4 g) produced in 8 M NaOH solution. A 1.4 M Epsom solution sprayed with a high-pressure jet cleaner at RT in air easily removed the sodium blocked inside a metal pipe made of mild steel. The above jet also dissolved peacefully residual sodium collected on the metal tray after a sodium fire experiment. No sodium fire or explosion was observed during this campaign. The Epsom solution spray effectively neutralized the minor quantity of sodium aerosol produced during this campaign. This novel technique would hence be quite useful for draining sodium from fast breeder reactor components and bulk processing of sodium as well as for sodium fire fighting.     

Purine-based carbenes at rhodium and iridium

Purine-based carbenes can be attached to catalysis-related metals like rhodium and iridium through the standard method of in situ deprotonation of the respective azolium salts. Thus, 1,3,7,9-tetramethylxanthinium tetrafluoroborate is obtained by the reaction of trimethyloxonium tetrafluoroborate and caffeine. The salt and 7,9-dimethylhypoxanthinium iodide were used as a consecutive precursor to form rhodium (I) and iridium (I) carbene complexes of the type [M(L)(L_Carbene)₂]I and M(L)(L_Carbene)(I) (M = Rh, Ir, L_Carbene = 1,3,7,9-tetramethylxanthine-8-ylidene, 7,9-dimethylhypoxanthine-8-ylidene, L = η⁴-1,5-COD, CO) (COD = 1,5-cyclooctadiene). All compounds were characterized by ¹H NMR, ¹³C NMR, mass spectrometry and/or elemental analysis.     

Ion chromatographic determination of hydrolysis products of hexafluorophosphate salts in aqueous solution

In this work, hydrolysis of three different hexafluorophosphate salts in purified water was investigated. Aqueous samples of lithium hexafluorophosphate (LiPF₆), sodium hexafluorophosphate (NaPF₆) and potassium hexafluorophosphate (KPF₆) were prepared and stored for different times. Ion chromatography (IC) with UV as well as non-suppressed and suppressed conductivity detection was used for the analysis of the reaction products. For the detection and identification of the formed decomposition products, an IC method using IonPac AS14A 250 mm × 4.0 mm i.d. column and 2.5 mM KHCO₃–2.5 mM K₂CO₃ eluent was established. Besides hexafluorophosphate, four other anionic species were detected in fresh and matured aqueous solutions. The hydrolysis products fluoride (F⁻), monofluorophosphate (HPO₃F⁻), phosphate (HPO₄²⁻) and difluorophosphate (PO₂F₂⁻) were found and were unambiguously identified by means of standards or electrospray ionization mass spectrometry (ESI-MS). It was shown that stability of hexafluorophosphate solutions depends on the nature of the counter ion and decreases in the order potassium > sodium > lithium.     

Synthesis and properties of new tetrachlorocobaltate (II) and tetrachloromanganate (II) anion salts with dicationic counterions

New tetrachlorocobaltate (II) and tetrachloromanganate (II) ionic compounds containing various counterdications were synthesized and characterized. These salts are soluble in polar solvents such as methanol and water. Physical properties such as thermal stability, melting point, and magnetic susceptibility of these salts depend on the cation or anion structure. The thermal stability of the phosphinium or imidazolium based salts is higher than that of the pyridinium or triethylaminonium analogues. The melting point of these compounds is following the order of triphenylphosphinium > pyridinium > imidazolium dications, and symmetrical dicationic salts > unsymmetrical ones. The magnetic susceptibility (χ_MT values) of tetrachloromanganate (II) anions-based salts is higher than that of tetrachlorocobaltate (II) anions-based salts. These dicationic salts exhibit weak antiferromagnetic interactions and have higher magnetic susceptibility than that of the previously reported tetrachloromanganate (II) and tetrachlorocobaltate(II) salts with monocationic counterion.     

Quantum chemical study of ethylene addition to group-7 oxo complexes MO2(CH3)(CH2) (M = Mn, Tc, Re)

Quantum chemical calculations using DFT at the B3LYP level have been carried out for the reaction of ethylene with the group-7 compounds ReO₂(CH₃)(CH₂) (Re1), TcO₂(CH₃)(CH₂) (Tc1) and MnO₂(CH₃)(CH₂) (Mn1). The calculations suggest rather complex scenarios with numerous pathways, where the initial compounds Re1-Mn1 may either engage in cycloaddition reactions or numerous addition reactions with concomitant hydrogen migration. There are also energetically low-lying rearrangements of the starting compounds to isomers which may react with ethylene yielding further products. The [2 + 2]_Re,C cycloaddition reaction of the starting molecule Re1 is kinetically and thermodynamically favored over the [3 + 2]_C,O and [3 + 2]_O,O cycloadditions. However, the reaction which leads to the most stable product takes place with initial rearrangement to the dioxohydridometallacyclopropane isomer Re1a that adds ethylene with concomitant hydrogen migration yielding Re1a-1. The latter reaction has a slightly higher barrier than the [2 + 2]_Re,C cycloaddition reaction. The direct [3 + 2]_C,O cycloaddition becomes more favorable than the [2 + 2]_M,C reaction for the starting compounds Tc1 and Mn1 of the lighter metals technetium and manganese but the calculations predict that other reactions are kinetically and thermodynamically more favorable than the cycloadditions. The reactions with the lowest activation barriers lead after rearrangement to the ethyl substituted dioxometallacyclopropanes Tc1a-1 and Mn1a-1. The manganese compound exhibits an even more complex reaction scenario than the technetium compounds. The thermodynamically most stable final product of ethylene addition to Mn1 is the ethoxy substituted metallacyclopropane Mn1a-2 which has, however, a high activation barrier.     

Catalytic reductive homocoupling of 9-bromofluorene

A number of organometallic compounds and inorganic salts, including the group 8 metal carbonyls M₃(CO)₁₂ and salts MCl₃ (M = Fe, Ru, Os), were tested for their catalytic activity in the reductive coupling of 9-bromofluorene. Among them, FeCl₃ was found to show excellent activity (TOF = 1960). The reaction is believed to proceed via a radical mechanism.     

Chloride based ionic liquids as promoting agents for Meerwein reaction in solventless conditions

Chloride based ionic liquids were used as chloride source in Meerwein reaction either in [bmim]X (bmim = 1-butyl-3-methylimidazolium, X = BF₄, PF₆) as solvents or in solventless conditions. Satisfactory yields (49-71%) with diversely substituted diazonium salts were achieved by using 1,3-dibutylimidazolium chloride in the presence of a bimetallic Zn/Cu catalyst.     

Preparation of magnetic CoFe2O4-functionalized graphene sheets via a facile hydrothermal method and their adsorption properties

Magnetic CoFe₂O₄-functionalized graphene sheets (CoFe₂O₄-FGS) nanocomposites have been synthesized by hydrothermal treatment of inorganic salts and thermal exfoliated graphene sheets. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations show that cobalt ferrite nanoparticles with sizes of 10-40 nm are well dispersed on graphene sheets. OH⁻ was recognized as a tie to integrate the inorganic salts with the graphene sheets, which made reaction started and developed on the surface of graphene sheets and formed cobalt ferrite nanoparticles on graphene sheets. The adsorption kinetics investigation revealed that the adsorption of methyl orange from aqueous solution over the as-prepared CoFe₂O₄-FGS nanocomposites followed pseudo-second-order kinetic model and the adsorption capacity was examined as high as 71.54 mg g⁻¹. The combination of the superior adsorption of FGS and the magnetic properties of CoFe₂O₄ nanoparticles can be used as a powerful separation tool to deal with water pollution.     

Allylic alkylation and amination using mixed (NHC)(phosphine) palladium complexes under biphasic conditions

A dramatic improvement of the catalytic activity was observed when a phosphine was added in allylic alkylation reactions catalyzed by (NHC)Pd(η³-C₃H₅)Cl complexes. Consequently, several palladium complexes, generated in situ from different NHC-silver complexes, [Pd(η³-C₃H₅)Cl]₂ and PPh₃, were tested in this reaction to evaluate their potential. High reaction rates and conversions could be obtained with this catalytic system in the alkylation of allylic acetates with dimethylmalonate, particularly under biphasic conditions using water/dichloromethane and KOH 1 M as the base. These conditions are experimentally more convenient and gave higher reaction rates than the classical anhydrous conditions (NaH/THF). In this system, the phosphine is essential since no conversion was obtained when it is not present. The steric hindrance of the carbene ligand has a great influence on the activity and the stability of the catalytic system. The best NHC ligands for this reaction are either 1-mesityl-3-methyl-imidazol-2-ylidene or 1-(2,6-diisopropylphenyl)-3-methyl-imidazol-2-ylidene which are less bulky among the NHC tested. These two ligands led in 5 min to a complete conversion at 20 °C. The Pd-catalyzed allylic amination reaction using (E)-1,3-diphenylprop-3-en-yl acetate and benzylamine was also tested with (NHC)(PPh₃)Pd complexes and under the biphasic conditions. This reaction was found to be slower than the alkylation with dimethylmalonate but a complete conversion could be reached in 6 h at 20 °C using K₂CO₃ 1 M as the base. NMR experiments indicated that mixed (NHC)(PPh₃)Pd complexes are formed in situ but their structure could not be established exactly.     

Nickel(II) derivatives of N-benzyliminodiacetate(2−) ligands,with and without imidazole: Synthesis,crystal structure and properties

In an attempt to prepare binary and ternary compounds, we have obtained two molecular complexes [Ni(MEBIDA or MOBIDA)(H₂O)₃]·nH₂O (n = 0 or 1) and two iso-type salts [Ni(Him)₆][Ni(MEBIDA or MOBIDA)₂]·4H₂O [MEBIDA = N-(p-methylbenzyl)iminodiacetate(2−) and MOBIDA = N-(p-methoxybenzyl)iminodiacetate(2−) ligands, Him = imidazole]. Our results are discussed with regard to related copper(II) and nickel(II) compounds. The reasons for which these chelating ligands produce nickel(II) salts instead of ternary compounds remain unclear since other iminodiacetate-like ligands give true ternary Ni(II) compounds with imidazole and other N-heterocyclic ligands.     

Solid-liquid phase equilibria in the system water + methanol + MgSO4·7H2O + MnSO4·4H2O

The solubilities and complex phase equilibria for the system of MnSO₄·4H₂O + MgSO₄·7H₂O + H₂O + CH₃OH were determined at the temperatures 291.2 and 301.2 K over the methanol mole fraction range of 0.00–0.12.The solubility data were used for modelling with the modified extended electrolyte non-random two-liquid equation. The salting-out effect of MgSO₄ and methanol on the solubilities of two manganese salts (MnSO₄·H₂O and MnSO₄·4H₂O) are represented in the several thermodynamic figures as a function of temperature. The solventing-out effect was stronger than the salting-out effect, which results in a decrease of the solubilities of manganese, salts even though the solubility of MnSO₄·H₂O decreased and solubility of MgSO₄·4H₂O increased as temperature increased.     

Selective enhancement effects of silver salts on the transition metal-catalyzed synthesis of gem-difluorinated heterocyclics using 2,2-difluorohomopropargyl amides

The addition of silver salts had an effect on the catalyst activity in the Pd(0)-catalyzed cyclization-coupling tandem reaction, as well as in the Rh(I)-catalyzed Pauson-Khand reaction. The cationic palladium complex generated from Pd(PPh₃)₄ (2.5 mol%) with AgSbF₆ (1.5 equiv.) activates the triple bond of 2,2-difluoropropargylic amides to give the 4,5-disubstituted 3,3-difluoro-γ-lactams, through a sequential 5-endo-dig cyclization and cross-coupling reaction. The γ-lactam was transformed into ring-opened monofluorovinylic compounds after silica-gel chromatography. Pauson-Khand reaction of fluorinated 1,7-enyne amides using catalytic amounts of [Rh(COD)₂]₂ (5 mol%) and AgOTf (20 mol%) gave the corresponding gem-difluorinated bicyclic lactam.     

A green and sensitive method to determine phenols in water and wastewater samples using an aqueous two-phase system

A greener and more sensitive spectrophotometric procedure has been developed for the determination of phenol and o-cresol that exploits an aqueous two-phase system (ATPS) using a liquid-liquid extraction technique. An ATPS is formed mostly by water and does not require organic solvent. Other ATPS components used in this study were the polymer, polyethylene oxide, and some salts (i.e., Li₂SO₄, Na₂SO₄ or K₂HPO₄ + KOH). The method is based on the reaction between phenol, sodium nitroprusside (NPS) and hydroxylamine hydrochloride (HL) in an alkaline medium (pH 12.0), producing the complex anion [Fe₂(CN)₁₀]¹⁰⁻ that spontaneously concentrates in the top phase of the system. The linear range was 1.50-500 μg kg⁻¹ (R ≥ 0.9997; n = 8) with coefficients of variation equal to 0.38% for phenol and 0.30% for o-cresol (n = 5). The method yielded limits of detection (LODs) of 1.27 and 1.88 μg kg⁻¹ and limits of quantification (LOQs) of 4.22 and 6.28 μg kg⁻¹ for phenol and o-cresol, respectively. Recoveries between 95.7% and 107% were obtained for the determination of phenol in natural water and wastewater samples. In addition, excellent agreement was observed between this new ATPS method and the standard 4-aminoantipyrine (4-AAP) method.     

Chemical synthesis of mesoporous CuO from a single precursor: Structural, optical and electrical properties

We report a simple method for growing photoluminescent mesoporous CuO nanoparticles by a chemical route, using the single precursor technique. The final products were characterized by powder X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), N₂ adsorption-desorption isotherm, UV-vis absorption spectroscopy, photoluminescence (PL) spectroscopy, Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy and Hall measurements. Structural analysis reveals that the average pore diameter of the as-prepared CuO is about 38.8 Å and it comes with an average surface area of 66.63 m²/g. N₂-sorption analysis shows that the resulting isotherm as type IV; which is the characteristic of mesoporous materials. The average crystal diameter, as derived from the XRD data analysis is found to be about 20 nm. FESEM measurement reveals that the material is composed of cubic nanoparticles. The UV-vis spectrum of the material shows significant amount of blue-shift in the band gap energy (E_g), due to the quantum confinement effect exerted by the nanocrystals. The Raman study of the CuO nanostructures also indicates the high crystalline nature of the material. From the positive sign of Hall coefficient, the p-type conduction nature of the deposited film is established. The film was found to show high magnetoresistance, which is in the order of 10⁵ Ω.