Formation and structural characterization of mercury complexes from Te(R)CH2SiMe3 (R = Ph, CH2SiMe3) and HgCl2

The reaction of HgCl₂ and Te(R)CH₂SiMe₃ [R = CH₂SiMe₃ (1), Ph (2)] in ethanol yielded a mononuclear complex [HgCl₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 3a; R = CH₂SiMe₃, 3b). The recrystallization of 3a or 3b from CH₂Cl₂ produced a dinuclear complex [Hg₂Cl₂(μ-Cl)₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 4a; R = CH₂SiMe₃, 4b). When 3a was dissolved in CH₂Cl₂, the solvent quickly removed, and the solid recrystallized from EtOH, a stable ionic [HgCl{Te(Ph)CH₂SiMe₃}₃]Cl·2EtOH (5a·2EtOH) was obtained. Crystals of [HgCl₂{Te(CH₂SiMe)₂}]·2HgCl₂·CH₂Cl₂ (6b·2HgCl₂·CH₂Cl₂) were obtained from the CH₂Cl₂ solution of 3b upon prolonged standing. The complex formation was monitored by ¹²⁵Te-, and ¹⁹⁹Hg NMR spectroscopy, and the crystal structures of the complexes were determined by single crystal X-ray crystallography.     

Reactivity of 2,3-bis(2-pyridyl)pyrazine with [Re2(CO)8(CH3CN)2]: Molecular structures of [Re2(CO)8(C14H10N4)] and [Re2(CO)8(C14H10N4)Re2(CO)8]

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re₂(CO)₈(C₁₄H₁₀N₄)] (1 and 2), and the complex [Re₂(CO)₈(C₁₄H₁₀N₄)Re₂(CO)₈] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)₃ fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by ¹H NMR (−50 °C, CD₃COCD₃), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)₃ fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re₂(CO)₆(C₁₄H₁₀N₄)₂] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.     

Synthesis, structures and preliminary biological screening of bis(diphenyl)chlorotin complexes and adducts: Ph2ClSn-CH2-R-CH2-SnClPh2, R = p-C6H4, CH2CH2

The reaction between ClCH₂-R-CH₂Cl, R = p-C₆H₄, and [Ph₃Sn]⁻Li⁺ yields Ph₃Sn-CH₂-R-CH₂-SnPh₃ (1) in high yield. The related known compound R = CH₂CH₂ (1a) is synthesized by the reaction of the di-Grignard reagent BrMg(CH₂)₄MgBr with two equivalents of Ph₃SnCl. Cleavage of a single Sn-Ph group at each tin centre of both compounds using HCl/Et₂O yields the corresponding bis-chlorostannanes Ph₂ClSn-CH₂-R-CH₂-SnClPh₂, R = (CH₂)₄ (2) and R = C₆H₄ (3), respectively. Compounds 1, 2 and 3 are crystalline solid materials and their single crystal X-ray structures are reported. In the solid state both 2 and 3 form self-assembled ladder structures involving alternating intermolecular Cl-Sn?Cl and Cl?Sn-Cl bonded chains at both ends of the distannanes with 5-coordinate tin atoms. Recrystallization of 3 from CH₂Cl₂ in the presence of DMF yields the bis-DMF adduct (4) in which no self-assembled structures were noted. Evaluation of the chlorostannanes 2 and 3 against a suite of bacteria, Staphylococcus aureus, Escherichia coli and Photobacterium phosphoreum is reported and compared to the related mono-chlorostannanes Ph₂(CH₃)SnCl and Ph₂(PhCH₂)SnCl.     

New synthetic route to polyphosphine ligands bearing 1,2,4,5-tetrakis(phosphino)benzene framework: structural characterizations of 1,4-(PPh2)2-2,5-(PR2)2-C6F2 (R = Ph, Pr, Et)

Reactions of 1,4-dibromo-2,5-difluorobenzene with two equivalents of lithium diisopropylamide at low temperature (T < −90 °C) followed by a quench with a slight excess of ClPPh₂ afford 1,4-dibromo-2,5-bis(diphenylphosphino)-3,6-difluorobenzene (1) in good yields. Reacting 1 with two equivalents of BuLi followed by a quench with a slight excess of ClPR₂ yield novel 1,2,4,5-tetrakis(phosphino)-3,6-difluorobenzenes 1,4-(PPh₂)₂-2,5-(PR₂)₂-C₆F₂ (R = Ph (2a); R = ⁱPr (2b); R = Et (2c)) in moderate yields. Compounds 1 and 2a-c were characterized by multinuclear NMR spectroscopy and elemental analyses. In addition, molecular structures of 2a-c have been determined by single crystal X-ray crystallography. Phosphorus atoms of PPh₂/PR₂ substituents in 2a-c are displaced from the plane of the central phenyl ring due to steric interactions with neighboring groups.     

Reactions of Mo(II)-tetraphosphine complex [MoCl2{meso-o-C6H4(PPhCH2CH2PPh2)2}] with a series of small molecules

Reactions of Mo(II)-tetraphosphine complex [MoCl₂(κ⁴-P4)] (2; P4 = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂) with a series of small molecules have been investigated. Thus, treatment of 2 with alkynes RCCR′ (R = Ph, R′ = H; R = p-tolyl, R′ = H; R = Me, R′ = Ph) in benzene or toluene gave neutral mono(alkyne) complexes [MoCl₂(RCCR′)(κ³-P4)] containing tridentate P4 ligand, which were converted to cationic complexes [MoCl(RCCR′)(κ⁴-P4)]Cl having tetradentate P4 ligand upon dissolution into CDCl₃ or CD₂Cl₂. The latter complexes were available directly from the reactions of 2 with the alkynes in CH₂Cl₂. On the other hand, treatment of 2 with 1 equiv. of XyNC (Xy = 2,6-Me₂C₆H₃) afforded a seven-coordinate mono(isocyanide) complex [MoCl₂(XyNC)(κ⁴-P4)] (7), which reacted further with XyNC to give a cationic bis(isocyanide) complex [MoCl(XyNC)₂(κ⁴-P4)]Cl (8). From the reaction of 2 with CO, a mono(carbonyl) complex [MoCl₂(CO)(κ⁴-P4)] (9) was obtained as a sole isolable product. Reaction of 9 with XyNC afforded [MoCl(CO)(XyNC)(κ⁴-P4)]Cl (10a) having a pentagonal-bipyramidal geometry with axial CO and XyNC ligands, whereas that of 7 with CO resulted in the formation of a mixture of 10a and its isomer 10b containing axial CO and Cl ligands. Structures of 7 and 9 as well as [MoCl(XyNC)₂(κ⁴-P4)][PF₆](8′) and [MoCl(CO)(XyNC)(κ⁴-P4)][PF₆] (10a′) derived by the anion metathesis from 8 and 10a, respectively, were determined in detail by the X-ray crystallography.     

Functionalized cyclodiphosphazanes cis-[BuNP(OR)]2 (R=C6H4OMe-o, CH2CH2OMe, CH2CH2SMe, CH2CH2NMe2) as neutral 2e, 4e or 8e donor ligands

Cyclodiphosphazanes having donor functionalities such as cis-[^tBuNP(OR)]₂ (R = C₆H₄OMe-o (2); R = CH₂CH₂OMe (3); R = CH₂CH₂SMe (4); R = CH₂CH₂NMe₂ (5)) were obtained in good yield by reacting cis-[^tBuNPCl]₂ (1) with corresponding nucleophiles. The reactions of 2-5 with [RuCl₂(η⁶-cymene)]₂, [MCl(COD)]₂ (M = Rh, Ir), [PdCl₂(PEt₃)]₂ and [MCl₂(COD)] (M=Pd, Pt) result in the formation of exclusively monocoordinated mononuclear complexes of the type cis-[{^tBuNP(OR)}₂ML_n-κP] irrespective of the reaction stoichiometry and the reaction conditions. In contrast, 2-5 react with [RhCl(CO)₂]₂, [PdCl(η³-C₃H₅)]₂, CuX (X=Cl, Br, I) to give homobinuclear complexes. Interestingly, CuX produces both mono and binuclear complexes depending on the stoichiometry of the reactants and the reaction conditions. The mononuclear complexes on treatment with appropriate metal reagents furnish heterometallic complexes.     

Oxime-substituted NCN-pincer palladium and platinum halide polymers through non-covalent hydrogen bonding (NCN = [C6H2(CH2NMe2)2-2,6])

The oxime-substituted NCN-pincer molecules HONCH-1-C₆H₃(CH₂NMe₂)₂-3,5 (2a) and HONCH-4-C₆H₂(CH₂NMe₂)₂-2,6-Br-1 (2b) were accessible by treatment of the benzaldehydes H(O)C-4-C₆H₃(CH₂NMe₂)₂-3,5 (1a) and H(O)C-4-C₆H₂(CH₂NMe₂)₂-2,6-Br-1 (1b) with an excess of hydroxylamine. In the solid state both compounds are forming polymers with intermolecular O-H?N connectivities between the Me₂NCH₂ substituents and the oxime entity of further molecules of 2a and 2b, respectively. Characteristic for 2a and 2b is a helically arrangement involving a crystallographic 2₁ screw axis of the HONCH-1-C₆H₃(CH₂NMe₂)₂-3,5 and HONCH-4-C₆H₂(CH₂NMe₂)₂-2,6-Br-1 building blocks.The reaction of 2b with equimolar amounts of [Pd₂(dba)₃ · CHCl₃] (3) (dba = dibenzylidene acetone) or [Pt(tol)₂(SEt₂)]₂ (4) (tol = 4-tolyl) gave by an oxidative addition of the C-Br unit to M coordination polymers with a [(HONCH-4-C₆H₂(CH₂NMe₂)₂-2,6)MBr] repeating unit (5: M = Pd, 6: M = Pt). Complexes 5 and 6 are in the solid state linear hydrogen-bridged polymers with O-H?Br contacts between the oxime entities and the metal-bonded bromide.     

Reverse Kocheshkov reaction - Redistribution reactions between RSn(OCH2CH2NMe2)2Cl (R = Alk, Ar) and PhSnCl3: Experimental and DFT study

A series of organotin compounds bearing two intramolecular N → Sn coordination bonds RSn(OCH₂CH₂NMe₂)₂Cl (R = Me (4), n-Bu (5), Mes (6)) were synthesized in good yields. These compounds as well as 2 (R = Ph) react with PhSnCl₃ to give redistribution products RPhSnCl₂ and (Me₂NCH₂CH₂O)₂SnCl₂ (3). The direction of redistribution reactions is reverse to Kocheshkov reaction. DFT calculations have shown that the driving force of the reactions is formation of intramolecular N → Sn coordination bonds in (RO)₂SnCl₂ (3), the Lewis acid stronger than RSn(OR)₂Cl (2, 4-6). The mechanism of the redistribution reaction between 2 and PhSnCl₃ consists of two steps: (1) initial exchange of OCH₂CH₂NMe₂ and Cl to give PhSn(OCH₂CH₂NMe₂)Cl₂ (7) followed by (2). Ph and OCH₂CH₂NMe₂ exchange.     

Dimeric and trimeric diorganosilicon chalcogenides (PhRSiE)2,3 (E = S, Se, Te; R = Ph, Me)

Ph₂SiCl₂ and PhMeSiCl₂ react with Li₂E (E = S, Se, Te) under formation of trimeric diorganosilicon chalcogenides (PhRSiE)₃ (R = Ph: 1a-3a, R = Me: cis/trans-4a (E = S), cis/trans-5a (E = Se)). In case of E = S, Se dimeric four-membered ring compounds (PhRSiE)₂ (R = Ph: 1b-2b, R = Me: cis/trans-4b (E = S), cis/trans-5b (E = Se)) have been observed as by-products. 1a-5b have been characterized by multinuclear NMR spectroscopy (¹H, ¹³C, ²⁹Si, ⁷⁷Se, ¹²⁵Te). Four- and six-membered ring compounds differ significantly in ²⁹Si and ⁷⁷Se chemical shifts as well as in the value of ¹J_SiSe.The molecular structures of 2a, 3a and trans-5a reported in this paper are the first examples of compounds with unfused six-membered rings Si₃E₃ (E = Se, Te). The Si₃E₃ rings adopt twisted boat conformations. The crystal structure of 3a reveals an intermolecular Te-Te contact of 3.858 Å which yields a dimerization in the solid state.     

Rhodium(I) carbonyl complexes of tetradentate chalcogen functionalized phosphines, [P(X)(CH2CH2P(X)Ph2)3] {X = O, S, Se}: Synthesis, reactivity and catalytic carbonylation reaction

The reaction of [Rh(CO)₂Cl]₂ with 0.5 mol equivalent of the ligands [P^′(X)(CH₂-CH₂P(X)Ph₂)₃](P^′P₃X₄) {where X = O(a), S(b) and Se(c)} affords tetranuclear complexes of the type [Rh₄(CO)₈Cl₄(P^′P₃X₄)] (1a-1c). The complexes 1a-1c have been characterized by elemental analyses, mass spectrometry, IR and multinuclear NMR spectroscopy, and the ligands b and c are structurally determined by single crystal X-ray diffraction. 1a-1c undergo oxidative addition (OA) reactions with CH₃I to generate Rh(III) oxidised products. Kinetic data for the reaction of 1a and 1b with excess CH₃I indicate a pseudo first order reaction. The catalytic activity of 1a-1c for the carbonylation of methanol to acetic acid and its ester show a higher Turn Over Frequency (TOF = 1349-1748 h⁻¹) compared to the well-known species [Rh(CO)₂I₂]⁻ (TOF = 1000 h⁻¹) under the similar experimental conditions. However, 1b and 1c exhibit lower TOF than 1a, which may be due to the desulfurization and deselinization of the ligands in the respective complexes under the reaction conditions.     

The reaction of the group-13 alkyls ER3 (E = Al, Ga, In; R = CH2t-Bu, CH2 SiMe3) with the platinum-complex [(dcpe)Pt(H)(CH2t-Bu)]

The reactions of the sterically demanding group-13 alkyls ER₃ (E = Al, Ga, In; R = CH₂t-Bu, CH₂SiMe₃) with the platinum-complex [(dcpe)Pt(H)(CH₂t-Bu)] were re-investigated. The bimetallic compounds [(dcpe)Pt(ER₂)(R)] (3: E = Ga, R = CH₂SiMe₃; 5: E = In, R = CH₂t-Bu; dcpe = bis(dicyclohexylphosphino)ethane) with direct σ(Pt-E) bonds were obtained by oxidative addition of an E-C bond to the coordinatively unsaturated fragment [(dcpe)Pt] produced in situ by thermolysis of the starting complex [(dcpe)Pt(CH₂t-Bu)(H)]. The single crystal structure determination reveals a Pt-Ga bond length of 2.376(2) Å and a Pt-In bond length of 2.608(1) Å. All new compounds were characterised by elemental analysis, ³¹P and ¹⁹⁵Pt NMR spectroscopy. Interestingly, the Pt-Ga compound 3 slowly transforms into the platinum alkyl/hydride isomer {(dcpe)Pt(μ₂-H)[CH₂Si(CH₃)₂ CH₂Ga(CH₂SiMe₃)₂]} (4) during crystallization from solution at room temperature. The X-ray single crystal structure analysis revealed both complexes 3 and 4 coexisting in the unit cell in a 1:1 relation. The inaccessibility of analytically pure samples of the Pt-Al complex {(dcpe)Pt[Al(CH₂t-Bu)₂](CH₂t-Bu)} (6), postulated as intermediate of the reaction of [(dcpe)Pt(H)(CH₂t-Bu)] with Al(CH₂t-Bu) on the basis of ³¹P and ¹⁹⁵Pt NMR data, is attributed to an enhanced tendency to isomerisation into the alkyl/hydride Pt/Al congener of 4. A brief DFT analysis of the bonding situation of the model complex [(dhpe)Pt(GaMe₂)(Me)] (1M) revealed, that the contribution of π(Pt-Ga) back-bonding is negligible.     

Synthesis, characterization, and ethylene polymerization behavior of [(RR′-admpzp)2Ti(OPr)2] complexes (RR′-admpzp = 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-olate)

[(RR′-admpzp)₂Ti(OPrⁱ)₂] complexes (2a-c), synthesized from reaction of Ti(OPrⁱ)₃Cl (0.5 equiv) with 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-ol compounds in the presence of triethylamine (0.5 equiv), are pseudo-octahedral with each RR′-admpzp ligand κ²-O,N(pyrazolyl) coordinated to the titanium center. In solution, 2a-c adopt isomeric structures that are in dynamic equilibrium. At 23 °C, 2a-c/1000 MAO catalyst systems furnished high molecular weight polymers with narrow molecular weight distributions (M_w/M_n = 2.7-2.8). At 100 °C, 2a-c/MAO catalyst systems exhibited increased polymerization activity and 2c/1000 MAO system furnished high molecular weight polyethylene with a molecular weight distribution (M_w/M_n = 2.1) that is close to that found for single-site catalysts.     

New versatile organyltellurium(IV) halides: Synthesis and X-ray structural features of the telluronium tellurolate salts [PhTe(CH3)2]2[TeX6] (X = Cl, Br) and [Ph3Te][PhTeX4] (X = Cl, Br, I)

TeX₄ (X = Cl, Br) react in HCl/HBr with [Ph(CH₃)₂Te]X (X = Cl, Br) to give [PhTe(CH₃)₂]₂[TeCl₆] (1) and [PhTe(CH₃)₂]₂[TeBr₆] (2). The reaction of PhTeX₃ (X = Cl, Br, I) in cooled methanol with [(Ph)₃Te]X (X = Cl, Br, I) leads to [Ph₃Te][PhTeCl₄] (3), [Ph₃Te][PhTeBr₄] (4) and [Ph₃Te][PhTeI₄] (5). In the lattices of the telluronium tellurolate salts 1 and 2, octahedral TeCl₆ and TeBr₆ dianions are linked by telluronium cations through Te?Cl and Te?Br secondary bonds, attaining bidimensional (1) and three-dimensional (2) assemblies. The complexes 3, 4 and 5 show two kinds of Te?halogen secondary interactions: the anion-anion interactions, which form centrosymmetric dimers, and two identical sets of three telluronium-tellurolate interactions, which accomplish the centrosymmetric fundamental moiety of the supramolecular arrays of the three compounds, with the tellurium atoms attaining distorted octahedral geometries. Also phenyl C-H?halogen secondary interactions are structure forming forces in the crystalline structures of compounds 3, 4 and 5.     

Reactivity of [Re2(CO)8(MeCN)2] with thiazoles: Hydrido bridged dirhenium compounds bearing thiazoles in different coordination modes

Reactions of the labile compound [Re₂(CO)₈(MeCN)₂] with thiazole and 4-methylthiazole in refluxing benzene afforded the new compounds [Re₂(CO)₇{μ-2,3-η²-C₃H(R)NS}{η¹-NC₃H₂(4-R)S}(μ-H)] (1, R = H; 2, R = CH₃), [Re₂(CO)₆{μ-2,3-η²-C₃H(R)NS}{η¹-NC₃H₂(4-R)S}₂(μ-H)] (3, R = H; 4, R = CH₃) and fac-[Re(CO)₃(Cl){η¹-NC₃H₂(4-R)S}₂] (5, R = H; 6, R = CH₃). Compounds 1 and 2 contain two rhenium atoms, one bridging thiazolide ligand, coordinated through the C(2) and N atoms and a η¹-thiazole ligand coordinated through the nitrogen atom to the same Re as the thiazolide nitrogen. Compounds 3 and 4 contain a Re₂(CO)₆ group with one bridging thiazolide ligand coordinated through the C(2) and N atoms and two N-coordinated η¹-thiazole ligands, each coordinated to one Re atom. A hydride ligand, formed by oxidative-addition of C(2)-H bond of the ligand, bridges Re-Re bond opposite the thiazolide ligand in compounds 1-4. Compound 5 contains a single rhenium atom with three carbonyl ligands, two N-coordinated η¹-thiazole ligands and a terminal Cl ligand. Treatment of both 1 and 2 with 5 equiv. of thiazole and 4-methylthiazole in the presence of Me₃NO in refluxing benzene afforded 3 and 4, respectively. Further activation of the coordinated η¹-thiazole ligands in 1-4 is, however, unsuccessful and results only nonspecific decomposition. The single-crystal XRD structures of 1-5 are reported.     

Synthesis and coordinating properties of the facultative Sb2O- and As2O-donor ligands O{(CH2)2ER2}2 (E = Sb or As; R = Ph or Me)

The new mixed Sb₂O-donor ligands O{(CH₂)₂SbR₂}₂ (R = Ph, 1; R = Me, 2) with flexible backbones have been prepared in good yields as air-sensitive oils from reaction of NaSbR₂ with 0.5 mol equivalents of O(CH₂CH₂Br)₂ in thf solution. The As₂O-donor analogues, O{(CH₂)₂AsR₂}₂ (R = Ph, 3; R = Me, 4) were obtained similarly from LiAsPh₂ or NaAsMe₂, respectively and O(CH₂CH₂Br)₂, although ligand 4 appears to be considerably less stable with respect to C-O bond fission under some conditions than the other ligands. Using O(CH₂CH₂Cl)₂ leads only to partial substitution by the SbPh₂⁻ or AsPh₂⁻ nucleophile. These ligands behave as bidentate chelating Sb₂- or As₂-donors in the distorted tetrahedral [M(L-L)₂]BF₄ (M = Cu or Ag; L-L = 1-4) on the basis of solution ¹H and ⁶³Cu NMR spectroscopic studies, mass spectrometry and microanalyses. Crystal structures of three representative examples with Cu(I) and Ag(I) confirm the distorted tetrahedral Sb₄ or As₄ coordination at the metal and allow comparisons of geometric parameters. The crystallographic identification of an unexpected Cu(I)-Cu(I) complex, [Cu₂{Me₂As(CH₂)₂OH}₃](BF₄)₂, obtained as a by-product via C-O bond fission within ligand 4 is also reported. The distorted octahedral [RhCl₂(L-L)₂]Cl and the distorted square planar cis-[PtCl₂(L-L)] (L-L = 1 or 2) are also described. The ether O atoms are not involved in coordination to the metal ion in any of the late transition metal complexes isolated.     

Synthesis, characterization, and substituent effects of mononuclear ruthenium complexes [RuCl(CO)(PMe3)3(CHCH-C6H4-R-p)] (R = H, CH3, OCH3, NO2, NH2, NMe2)

A series of mononuclear ruthenium complexes [RuCl(CO)(PMe₃)₃(CHCH-C₆H₄-R-p)] (R = H (2a), CH₃ (2b), OCH₃ (2c), NO₂ (2d), NH₂ (2e), NMe₂ (2f)) has been prepared. The respective products have been characterized by elemental analyses, NMR spectrometry, and UV-Vis spectrophotometry. The structures of complexes 2c and 2d have been established by X-ray crystallography. Electrochemical studies have revealed that electron-releasing substituents facilitate monometallic ruthenium complex oxidation, and the substituent parameter values (σ) show a strong linear correlation with the anodic half-wave or oxidation peak potentials of the complexes.     

Mixed-metal single-molecule magnets: Syntheses, structure, and magnetic properties of [Mn8Fe4O12(O2CR)16(H2O)4] (R = CH2Cl, CH2Br, CHCl2)

Three mixed-metal single-molecule magnets containing [Mn₈Fe₄O₁₂]¹⁶⁺ cores are synthesized and characterized. The reaction of FeCl₂·4H₂O with KMnO₄ and RCOOH (R = CH₂Cl, CH₂Br) in H₂O gives [Mn₈Fe₄O₁₂(O₂CR)₁₆(H₂O)₄] (R = CH₂Cl (1), CH₂Br (2)) in yields of 43% and 40%, respectively. Treatment of complex 1 with an excess of CHCl₂COOH in CH₂Cl₂ gives [Mn₈Fe₄O₁₂(O₂CCHCl₂)₁₆(H₂O)₄]·CH₂Cl₂·10H₂O (3·CH₂Cl₂·10H₂O) in a yield of 83%. The X-ray structure analysis reveals that all three complexes consist of a trapped-valence dodecanuclear core comprising 4Mn^III, 4Fe^III, and 4Mn^IV ions. DC magnetic susceptibility and magnetization measurements indicate that all three complexes exhibit intramolecular antiferromagnetic interaction, resulting in an S = 4 ground state. In addition, frequency-dependent out-of-phase AC magnetic susceptibility signals at low temperature for complexes 1, 2, and 3 are indicative of their single-molecule magnetism behavior.     

Quantum chemistry studies on the Ru-M interactions and the P NMR in [Ru(CO)3(Ph2Ppy)2(MCl2)] (M = Zn, Cd, Hg)

To study the Ru-M interactions and their effects on ³¹P NMR, complexes [Ru(CO)₃(Ph₂Ppy)₂] (py = pyridine) (1) and [Ru(CO)₃(Ph₂Ppy)₂MCl₂] (M = Zn, 2; Cd, 3; Hg, 4) were calculated by density functional theory (DFT) PBE0 method. Moreover, the PBE0-GIAO method was employed to calculate the ³¹P chemical shifts in complexes. The calculated ³¹P chemical shifts in 1-3 follow 2 > 3 > 1 which are consistent to experimental results, proving that PBE0-GIAO method adopted in this study is reasonable. This method is employed to predict the ³¹P chemical shift in designed complex 4. Compared with 1, the ³¹P chemical shifts in 2-4 vary resulting from adjacent Ru-M interactions. The Ru → M or Ru ← M charge-transfer interactions in 2-4 are revealed by second-order perturbation theory. The strength order of Ru → M interactions is the same as that of the P-Ru → M delocalization with Zn > Cd > Hg, which coincides with the order of ³¹P NMR chemical shifts. The interaction of Ru → M, corresponding to the delocalization from 4d orbital of Ru to s valence orbital of M²⁺, results in the delocalization of P-Ru → M, which decreases the electron density of P nucleus and causes the downfield ³¹P chemical shifts. Except 2, the back-donation effect of Ru ← M, arising from the delocalization from s valence orbital of M²⁺ to the valence orbital of Ru, is against the P-Ru → M delocalization and results in the upfield ³¹P chemical shifts in 4. Meanwhile, the binding energies indicate that complex 4 is stable and can be synthesized experimentally. However, as complex [Ru(CO)₃(Ph₂Ppy)₂HgCl]⁺5 is more stable than 4, the reaction of 1 with HgCl₂ only gave 5 experimentally.     

Si-C coupling reaction of polychloromethanes with HSiCl3 in the presence of Bu4PCl: Convenient synthetic method for bis(chlorosilyl)methanes

Coupling reaction of polychloromethanes CH_4−nCl_n (n = 2-4) with HSiCl₃ in the presence of tetrabutylphosphonium chloride (Bu₄PCl) as a catalyst occurred at temperatures ranging from 30 °C to 150 °C. The reactivity of polychloromethanes increases as the number of chlorine-substituents on the carbon increases. In the reactions of CCl₄ with HSiCl₃, a variety of coupling products such as bis(chlorosilyl)methanes CH₂(SiCl₃)(SiXCl₂) [X = Cl (1a), H (1b)], (chlorosilyl)trichloromthanes Cl₃CSiXCl₂ [X = Cl (2a), H (2b)], and (chlorosilyl)dichloromthanes Cl₂HCSiXCl₂ [X = Cl (3a), H (3b)] were obtained along with reductive dechlorination products such as CHCl₃ and CH₂Cl₂ depending on the reaction temperature. In the reaction of CCl₄, 2a is formed at the initial stage of the coupling reaction and converted to give CHCl₃ at low temperature of 30 °C, to give 1a, 3a, and CHCl₃ at 60 °C, and to afford 1a as major product and CH₂Cl₂ in competition above 100 °C. Si-H bond containing silylmethanes can be formed by the H-Cl exchange reaction with HSiCl₃. Reaction of CHCl₃ with HSiCl₃ took placed at 80 °C to give three compounds 1a, 3a, and CH₂Cl₂, and finally 3a was converted to give 1a and CH₂Cl₂ at longer reaction time. While the condition for the reaction of CH₂Cl₂ with HSiCl₃ required a much higher temperature of 150 °C. Under the optimized conditions for synthesizing bis(chlorosilyl)methanes 1a,b, a mixture of 1a and 1b were obtained as major products in 65% (1a:1b = 64:1) and 47% (42:5) yields from the reaction of CCl₄ and CHCl₃ at 100 °C for 8 h, respectively, and in 41% (34:7) yield from that of CH₂Cl₂ at 170 °C for 12 h. In the Si-C coupling reaction of polychloromethanes with HSiCl₃, it seems likely that a trichlorosilyl anion generated from the reaction of HSiCl₃ with Bu₄PCl is an important key intermediate.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.