Rapid Solvent Extraction of Tin(IV) with High Molecular Weight Amine from Hydrochloric Acid Solution

A novel method has been developed for the solvent extraction of tin(IV) from 8 M hydrochloric acid with 4% N‐n‐octylaniline. Tin(IV) from the organic phase was determined spectrophotometrically with pyrocatechol violet at 550 nm. Extraction was found to be quantitative in the range of 7–10 M hydrochloric acid. When the concentration of N‐n‐octylaniline was varied from 0.05–20% in xylene, it showed that optimum concentration was > 3%. Amongst diluents like benzene and xylene, toluene was found to be an effective diluent. Effect of shaking time, concentration of metal ion, and salting out agents was studied. Tolerance limits of various diverse ions were determined by masking interfering cations. Tin(IV) was separated from associated elements in its binary mixture with Se(IV), Sb(III), Bi(III), Pb(II), Au(III), Cu(II) and Zn(II) and from its ternary mixtures with Sb(III), Bi(III) and Cu(II), Au(III). The proposed method was applied for separation and determination of tin(IV) in tin bearing alloys and foodstuffs.     

Fractional sublimation of some metal chelates of thenoyltrifluoroacetone

Studies on the fractional sublimation of various metal β-diketone chelates have been extended to include the chelates of thenoyltrifluoroacetone (TTA). Many of the common metal chelates were found to be stable, to sublime readily, and to form well-defined zones in the vacuum fractional sublimator. Of the 17 chelates reported only those of manganese (II) and iron(II) were not volatile. The chelates of UO₂(II), Zr(IV), Pb(II), and Cr(III) partially decomposed during sublimation and their recovery was incomplete. The recovery of the sublimed chelates of Ni(II), Mg(II), Al(III), Pd(II), Co(II), Cu(II). Fe(III), Tl(III), Zn(II) and Be(II) ranged from 87 to 100%, with most recoveries being quantitative. The sublimation recrystallization zone temperatures of the various chelates are compared to those of the metal acetylacetonates and the benzoyltrifluoroacetonates; in general, the metal chelates of TTA sublime more readily than those of benzoyltrifluoroacetone but are potentially less useful for fractional sublimation separations than the corresponding metal acetylacetonates. Even so, a quantitative separation of iron(III) from Ni(II), Al(III), Mn(II), and Fe(II) is proposed that depends upon the fractional sublimation of the TTA chelates.     

以硫醚为主链的螯合树脂研究——Ⅲ.含硫氰酸根树脂的合成及吸附性能

环硫氯丙烷的均聚物或环硫氯丙烷与环氧氯丙烷的共聚物,在少量二乙烯三胺存在下制得预交联聚合物,将后者与硫氰化钾反应,制得两种侧链带有硫氰酸根的新型螯合树脂。它们对贵金属具有优良的吸附性能和高的吸附选择性。通过X射线光电予能谱初步探讨了树脂对金属离子的螯合作用     

Studies on the thermal decomposition of some metal complexes of 5,5′-methylendisalicylhydroxamic acid

The thermal behaviour of the chelates of 5,5′-methylendisalicylhydroxamic acid with Pb(II), Zn(II), Ni(II), Cd(II), Fe(III), Cr(III), Al(III), Ti(IV), V(V), Mo(VI) and Cu(II) has been studied by thermogravimetry (TG), differential thermal analysis (DTA), IR spectroscopy and X-ray diffraction.The compounds decompose through three major steps, dehydration, transformation of the anhydrous hydroxamates to intermediate N-hydroxylactams, which decompose to yield metal oxides as the final products.     

Potassium thiocarbonate as a precipitant for platinum metals

Potassium thiocarbonate reagent is proposed for the gravimetric determination of ruthenium(III), rhodium(III), palladium(II) and platinum(IV) in a highly acidic medium (pH 0.5-0.7) under suitable conditions. Ni, Zn, Mn(II), Al, Fe(III), Ti(IV), Zr, Th, Ca, Ba, Sr and Mg do not interfere. The largest relative error is 0.7% and the average error 0.2%.     

Spectrophotometric determination of copper(II) using oximidobenzotetronic acid

Summary Oximidobenzotetronic acid (OBTA) is proposed as a sensitive spectrophotometric reagent for the estimation of 0.5–3.0 ppm of copper(II) at 427 nm in 50% dioxan at p_H 5.3–7.5. For the estimation of 2 ppm Cu(II), 1.3 ppm Ni(II), 1.3 ppm Co(II), 3.2 ppm Fe(II), 10.3 ppm Fe(III), 9.7 ppm Ce(IV), 300 ppm acetate, 160 ppm oxalate, 95 ppm tartrate, 50 ppm citrate, as well as Zn(II), Cd(II), Hg(II)) Pb(II), Mn(II), As(III) as well as (V), Th(IV), Be(II), Ce(III), La(III), V(V) and Mo(VI), even when present in large quantities, do not interfere. The interference due to 25 ppm Bi(III), 20 ppm Sb(III), 20 ppm Sn(II), 25 ppm Sn(IV) and 30 ppm W(VI) can be removed by the addition of 95 ppm tartrate ions.

---

Zusammenfassung Oximidobenzotetronsäure wurde als empfindliches Reagens zur spektrophotometrischen Bestimmung von 0,5 bis 3,0 ppm Kupfer(II) bei 427 nm in 50%iger Dioxanlösung bei p_H 5,3 bis 7,5 vorgeschlagen. Die Anwesenheit von 1,3 ppm Ni(II), 1,3 ppm Co(II), 3,2 ppm Fe(II), 10,3 ppm Fe(III), 9,7 ppm Ce(IV), 300 ppm Acetat, 160 ppm Oxalat, 95 ppm Tartrat, 50 ppm Citrat sowie die Anwesenheit auch großer Mengen Zn(II), Cd(II), Hg(II), Pb(II), Mn(II), As(III) bzw. (V), Th(IV), Be(II), Ce(III), La(III), V(V) und Mo(VI) stören die Bestimmung von 2 ppm Cu(II) nicht. Der störende Einfluß von 25 ppm Bi(III), 20 ppm Sb(III), 20 ppm Sn(II), 25 ppm Sn(IV) und 30 ppm W(VI) kann durch Zusatz von 95 ppm Tartrat beseitigt werden.

     

Solvent extraction of several metal ions with mercaptotropone

Mercaptotropone was synthesized from tropone, and its acid dissociation constant (K_a) and distribution coefficient (K_D) between benze and aqueous solution were spectrophotometrically determined as 5.75 (pK_a) and 2.46 (log K_D); Extraction behaviour of Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Pb(II), Cr(III), Fe(III), Y(III), and Zr(IV) with this reagent into benzene was examined. Cu(II) and Fe(III) were completely extracted from acidic solution, Mn(II), Co(II), Ni(II), Zn(II), Pb(II), and Zr(IV) were also extracted from intermediate pH region, a part of Cr(III) was extracted, but Y(III) was not extracted.     

Ion flotation behaviour of thirty-one metal ions in mixed hydrochloric/nitric acid solutions

The ion flotation of 31 metal ions in hydrochloric/nitric acid solution with the cationic surfactant cetylpyridinium chloride was investigated. A 25-ml portion of 0.27-2.87 x 10(-4)M metal ion and 1.8-6.0 x 10(-4)M cetylpyridinium chloride solution in 0.17-3.4M acid mixture ([HCl]:[HNO(3)] = 2.4:1) was subjected to flotation in a cell, 22.5 cm high and 4.0 cm in diameter, for 5 min, with nitrogen bubbles. Ir(IV), Pt(IV), Ge(IV), Sn(IV), Bi(III), Au(III), Tl(III), Pd(II) and Sn(II) were floated from solution in 95-100% yield; Ru(III), Rh(III), Ir(III), Hg(II), Ag(I) and Tl(I) were partly floated, while Cr(VI), Ti(IV), Zr(IV), Ga(III), In(III), Fe(III), Sb(III), Al(III), Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), CD(II) and Pb(II) were floated with less than 20% yield. The flotation behaviour of these metal ions in the mixed acid system was compared with that in hydrochloric acid. The flotation is more efficient in the mixed acid system.     

Mandelazo I As A Reagent For Zr(IV) Determination

Abstract

A spectromeric study of the reaction of the Zr(IV) ions with Mandelazo I was carried out. Absorption spectra revealed that the maximum absorption of the zirconium compound appears at a wavelength (316 nm) different from the maxima of the reagent (253 and 390 nm). Beer-Lambert law is followed for zirconium concentrations of the order of 8.8x 10^?5 M (i.e. 8 μg Zr (IV)/mL). Possible interferences of ions such as Be(II), Cu(II), Zn(II), Al(III), Th(IV), U(VI), Mn(II), Fe(III), Co(II) and Ni(II) were investigated in connection with some masking agents such as SO₄ ^2- and C₂O₄ ^2-. Also, the solid state Zr(IV)-Mandelazo I compound was prepared and characterized by nitrogen and thermogravimetric analyses.     

Reaction of 2,5-(Dibenzothiazolin-2-yl)thiophene with Some Metal Ions

2,5-(Dibenzothiazolin-2-yl)thiophene has been synthesized by the reaction of 2,5-thiophenedicarboxaldehyde and $\text{o}$-aminobenzenethiol. It reacts as a neutral ligand with Pd(II). However, it reacts as a dianion with Cu(II), Ag(I), Cd(II), Pb(II) and Zn(II), suggesting that the ligand is bonded as the conjugate base of the Schiff base 2,5-thiophenediylbis{N-(pheylen-2-thiol)aldimine}. Its behavior with Hg(II), Ru(III), Pt(II), Rh(III) and Ni(II) involves the opening of one of the thiazoline rings of the ligand.     

Quantitative separation of gallium from zinc, copper, indium, iron(III) and other elements by cation-exchange chromatography in hydrobromic acid-acetone medium

Gallium can be separated from Zn, Cu(II), In, Cd, Pb(II), Bi(III), Au(III), Pt(IV), Pd(II), Tl(III), Sn(IV) and Fe(III) by elution of these elements with 0.50M hydrobromic acid in 80% acetone medium, from a column of AG50W-X4 cation-exchange resin. Gallium is retained and can be eluted with 3M hydrochloric acid. Separations are sharp and quantitative except for iron(III) which shows extensive tailing. With 0.20M hydrobromic acid in 80% acetone as eluting agent, all the species above except iron(III) and copper(II) can be separated from gallium with very large separation factors. Only a 1-g resin column and small elution volumes are required to separate trace amounts and up to 0.5 mmole of gallium from more than 1 g of zinc or the other elements. Hg(II), Rh(III), Ir(IV), Se(IV), Ge(IV), As(III) and Sb(III) have not been investigated, but should be separated together with zinc according to their known distribution coefficients. Relevant elution curves, results for the analysis of synthetic mixtures and for amounts of some elements remaining in the gallium fraction are presented.     

Analytical characterization of a silica gel sorbent with thioetheric sites

The sorption behavior of a newly synthesized silica gel sorbent with thioetheric sites (STS) towards microgram levels of Au(III), Pt(IV) and Pd(II) was studied. Au(III) is quantitatively (>95%) sorbed in the pH region of 1–9. The sorption of Pt(IV) starts at pH 1 and does not exceed 25% in the entire pH region examined. The sorption of Pd(II) starts at pH 7 and reaches 80% at pH 9. The sorption of Au(III) on STS at pH 1 is not affected by milligram amounts of Ni(II), Zn(II), Fe(III), Cu(II), Pb(II), Cd(II) or Co(II). Au(III) is quantitatively eluted with a 5% aqueous solution of thiourea. The adsorption capacity of STS towards Au(III) is 195 mg g⁻¹. The detection limit (DL) of Au(III) (3σ, n = 9) is 25 ng mL⁻¹. The RSD at a level of 10 × DL is about 2%. Solid-phase extraction of trace amounts of Au(III) on the STS sorbent, followed by its flame AAS determination in the eluate was applied to the determination of gold in geological samples. The results obtained for the gold content in the samples were in good agreement with those of the ICP-AES analysis.     

Potentiometric Study of Tetracycline and Oxytetracycline with some Metal Ions of Biological Interest

Abstract

The stepwise metal-ligand stability constants of tetracycline and oxytetraoycline chelates with Mg(II), Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Cu(II), Zn(II), Zr(II) and Sn(II) have been determined using the Bjerrum-Calvin titration technique as employed by Irving and Rossotti. Protonation constant of the ligand and stability constants of the respective metal complexes have been determined at constant temperature (25°C) and ionic strength (0.1 M KCl). The general order of overall stability constant values have been found to be: Zr(IV) > Fe(III) > Co(II) > Zn(II) > Mg(II) > Mn(II) > Ni(II) > Sn(II) > Tn(II) > Cr(II). The rign values of the atability constanta are attricutel to the Ligands, which are stronger as an acid and weaser as a oase.     

Selective separation of indium from zinc, lead, gallium and many other elements by cation-exchange chromatography in hydrohalic acid-acetone medium

Indium can be separated from Zn, Pb(II), Ga, Ca, Be, Mg, Ti(IV), Mn(II), Fe(III), Al, U(VI), Na, Ni(II) and Co(II) by selective elution with 0.50M hydrochloric acid in 30% aqueous acetone from a column of AG50W-X8 cation-exchange resin, all the other elements being retained by the column. Lithium is included in the elements retained by the column when 0.35M hydrochloric acid in 45% aqueous acetone is used for eluting indium, but the elution of indium is slightly retarded. Ba, Sr, Zr, Hf, Th, Sc, Y, La and the lanthanides, Rb and Cs should also be retained according to their distribution coefficients. Cd, Bi(III), Au(III), Pt(IV), Pd(II), Rh(III), Mo(VI) and W(VI) can be eluted with 0.20M hydrobromic acid in 50% aqueous acetone before the elution of indium, and Ir(III), Ir(IV), As(III), As(V), Se(IV), Tl(III), Hg(II), Ge(IV), Sb(III) and Sb(V), though not investigated in detail, should accompany these elements. Relevant distribution coefficients and elution curves and results for analyses of synthetic mixtures of indium with other elements are presented.     

Synthesis of new ionic β-cyclodextrin polymers and characterization of their heavy metals retention

In this study, a new aqueous insoluble ionic β-cyclodextrin polymer (PYR), synthesized by reaction of β-cyclodextrin with pyromellitic anhydride [1], is characterized by IR spectroscopy, showing typical cyclodextrin and carboxylic absorptions. pH-metric titrations of the acidic functions with standard NaOH solutions followed by a refinement of protonation constants, with specific software for equilibrium in solution, have been performed. Through this approach, the pK _a values of the functional groups have been calculated. The complexation capabilities of PYR towards metal ions [Al(III), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Pd(II), Cd(II), Pt(IV), Tl(I), and U(IV)] have been evaluated in aqueous solution (pH 3–5). The retention is mainly pH dependent and higher than 70% for Al(III), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Pd(II), Cd(II) and U(IV). For Tl(I) and Pt(IV) the retention is about 60% and 40% respectively.     

Chloroform extraction of metal ethyl xanthates from hydrochloric acid media

The chloroform extraction of 32 elements (Fe, Co, Ni, Zn, Cd, Ge, Sn, Pb, V, As, Sb, Bi, Cu, Ag, Au, Mn, Re, Ga, In, Tl, Ce, Se, Te, Cr, Mo, U, Pt, Pd, Rh, Ir, Ru and Os) from O.1-10M hydrochloric acid media in the presence of potassium ethyl xanthate has been studied. The oxidation states in which some elements react, and potential analytical separations, are discussed. Pd(II), As(III) and Se(IV) are completely extracted as ethyl xanthate complexes, Te(IV) is almost completely extracted, and Au(III) is largely extracted over the range of acid concentration investigated. Mn(II), Zn, Rh(III), Ir(IV), Ru(III), Os(IV), Cr(III), Cr(VI), Ce(III) and Ce(IV) are not extracted. Ge is partly extracted from 6-10M media as the chloro-complex. Depending on the acid concentration, the remaining elements are all partially extracted as xanthate complexes.     

Anion-exchange behavior of various metals in hydrazoic acid media

The adsorption characteristics for 43 metals on a strongly basic ion-exchange resin Bio-Rad AG1 were examined in 0.5 M hydrazoic acid solution. The distribution coefficients for V(IV), Fe(III), Cu(II), Zn, Se(IV), Mo(VI), Pd(II), Cd, In(III), Rc(VII), Hg(II) and U(VI), which showed very strong adsorption except for Cd, were measured as a function of hydrazoic acid concentration over the range 0.05–0.5 M. Favorable differences in the distribution coefficients allow useful two- and three-component separations such as Co(II)-Fe(III), As(III)-V(IV), Cd-Zn, Cd- Hg(II), Te(IV)-Se(IV), Th-U(VI), Mn(II)-Mo(VI)-Re(VII), to be achieved on a small column.     

Oximidobenzotetronic acid as a reagent for the separation and gravimetric determination of palladium and cobalt

Oximidobenzotetronic acid is recommended for the separation and gravimetric determination of palladium and cobalt An ethanolic solution of the reagent quantitatively precipitates palladium(II) from solutions which are 0.75 N in acid up to pH 5.1, the complex is weighed as Pd(C₉H₅NO₄)₂. Cobalt(II) can be determined in the filtrate after the precipitation of palladium. With 0.5 N acid solutions, no interference was found from Pt(IV), Ir(IV), Rh(III), Ru(III), Os(IV), Au(III), Ag(I), Cu(II), Fe(III), Ni(II), Hg(II). Pb(II), Bi(III), Cd(II), As(V), Se(VI), Te(IV), Mo(VI), Sb(III), Al(III), Cr(III), Zn(II), Ti(IV), Zr(IV). acetate, oxalate, citrate, tartrate, phosphate and fluoride.