Adsorption of chromium from aqueous solution using chitosan beads

A basic investigation on the removal of Cr(III) and Cr(VI) ions from aqueous solution by chitosan beads was conducted in a batch adsorption system. The chitosan beads were prepared by casting an acidic chitosan solution into an alkaline solution. The influence of different experimental parameters; pH, agitation period and different concentration of Cr(III) and Cr(VI) ions was evaluated. A pH 5.0 was found to be an optimum pH for Cr(III) adsorption, and meanwhile pH 3.0 was the optimum pH for the adsorption of Cr(VI) onto chitosan beads. The Langmuir and Freundlich adsorption isotherm models were applied to describe the isotherms and isotherm constants for the adsorption of Cr(III) and Cr(VI) onto chitosan beads. Results indicated that Cr(III) and Cr(VI) uptake could be described by the Langmuir adsorption model. The maximum adsorption capacities of Cr(III) and Cr(VI) ions onto chitosan beads were 30.03 and 76.92 mg g⁻¹, respectively. Results showed that chitosan beads are favourable adsorbents. The Cr(III) and Cr(VI) ions can be removed from the chitosan beads by treatment with an aqueous EDTA solution.     

The effects of pH and ionic strength on fulvic acid uptake by chitosan hydrogel beads

The objective of this work is to investigate the effects of pH and ionic strength on the adsorption capacity for fulvic acid (FA) by chitosan hydrogel beads. The results indicated that the sorption amount increased with decreasing pH and increasing ionic strength concentration. The sorption isotherms were well described by using non-linear Langmuir, Freundlich and Redliche–Peterson equation. The adsorption kinetics of FA onto chitosan hydrogel beads could be described by pseudo-second-order rate model. The extent of FA removal in the presence of other ions decreases in the order Ca²⁺ > Mg²⁺ > Na⁺ ≈ K⁺ and Cl⁻ > NO₃⁻ > CO₃²⁻. FTIR along with XPS analyses revealed the amine groups on the beads were involved in the sorption of FA and the organic complex between the protonated amino groups and FA was formed after FA uptake. Sorption mechanisms including electrostatic interaction and surface complexation were found to be involved in the complex sorption of FA on the chitosan hydrogel beads.     

Adsorption of metal ions by microwave assisted grafting of cross‐linked chitosan beads. Equilibrium,isotherm, thermodynamic and desorption studies

Chemical modification of chitosan has become increasingly essential due to chitosan versatility that enables the material to be easily modified in a way of increasing its properties in adsorption processes. In this investigation, chitosan solution was cross‐linked with glutaraldehyde the cross‐linked solution was used in producing the beads and thereafter grafted with ethylene acrylic acid. The chemical functionalities of the beads were obtained by Fourier transform infrared spectroscopy (FTIR), Scanning electron microscope (SEM), X‐ray diffraction (XRD) and Thermogravimetric analysis (TGA). Adsorption of Pb²⁺, Cu²⁺, Ni²⁺, Zn²⁺, Cr⁶⁺ and Cd²⁺ ions from single component aqueous mixture by grafted cross‐linked chitosan beads (GXXB) was studied as a function of pH, temperature, initial concentration, contact time, agitation speed and ionic strength. Equilibrium data was obtained from the adsorption experiment, the data were applied in isotherm, thermodynamics and kinetic studies. The Langmuir, Temkin and Dubinin‐kaganer‐Radushkevich (DKR) model were successful in describing the isotherm data for the considered metal ions while the Freundlich model was not efficient in describing the experimental data. Pseudo‐second order and intra‐particle model described the kinetic data quite well. Thermodynamic parameters such as Gibb's free energy change (?G^o), enthalpy change (?H^o) and entropy change (?S^o) were calculated and the results showed the adsorption of Pb²⁺, Cu²⁺, Ni²⁺, Zn²⁺, Cr⁶⁺ and Cd²⁺ ions onto GXXB is spontaneous and endothermic in nature. Regeneration of the used adsorbent was effective for the studied metal ions.     

A NOVEL METAL CHELATE AFFINITY ADSORBENT FOR PROTEIN UPTAKE

1. INTRODUCTION Chitosan is a hydrolyzed derivative of chitin and belongs to a family of linear unbranched polysaccharides which contain large amounts of 1,4-linked-2-amino-2-deoxy-β-D-glucan residues. The presence of free amine groups in chitosan enhances the solubility and reactivity of this polymer. Interest in modifying chitosan by using glutaraldehyde has recently increased. The derivatized polymers have been employed for many applications [1~2], including protein immobilization…     

Preparation and characterization of novel bi-functionalized xerogel for removal of methylene blue and lead ions from aqueous solution in batch and fixed-bed modes: RSM optimization,kinetic and equilibrium studies

A new bi-functionalized xerogel is fabricated and then was identified by ²⁹Si CP MAS NMR, SEM, FTIR, and nitrogen adsorption–desorption approaches. As-prepared xerogel efficiency for simultaneous uptake of methylene blue (MB) and Pb²⁺ ions from aqueous solution is investigated. Individual and combination effects of operating variables (xerogel mass, contact time and initial MB and Pb²⁺ ion concentration) on the retention performance is achieved with central composite design (CCD) and upgraded through response surface method (RSM). Batch equilibrium outcomes uncovered that MB and Pb²⁺ ions adsorption onto hybrid composite could be all around depicted by Langmuir isotherm model contrasted with Freundlich equation. Howbeit, the column trials reported that the breakthrough capacities of MB and Pb(II) are observed to be 512 mg.g⁻¹ and 400 mg.g⁻¹ respectively. XPS and FTIR investigations uncovered that the main mechanism of lead uptake ought to be credited to the chelation with –NH₂ and ion exchange with –SH groups in the xerogel frameworks. While the MB adsorption system is proposed to be electrostatic attractions, π-π stacking interactions and hydrogen bonds. The work undertaken in this research highlights the major role of the as-synthesized xerogel for treatment of industrial wastewater.     

A NOVEL METAL CHELATE AFFINITY ADSORBENT FOR PROTEIN UPTAKE

In this article,a spherical chitosan gel crosslinked by epichlorohydrin was prepared.It was then loaded with copper ions to produce a metal chelate affinity adsorbent for protein.The uptake of bovine serum albumin(BSA)by the affinity adsorbent was investigated.and the adsorption capacity for BSA as high as 40mg/g-wet beads was observed.The adsorption equilibrium data was well correlated by the Langmuir equation.The adsorption was considerably affected by pH.In additio.The amount of BSA adsorbed onto the beads decreased with the increasing of aqueous phase ionic strength,so adsorbed BAS can be desorbed by adjusting pH orionic strength of the solution.     

Thermodynamics and kinetics of adsorption of Cu(II) from aqueous solutions onto multi-walled carbon nanotubes

Release of heavy metals into water as a result of industrial activities may pose a serious threat to the environment. The objective of this study is to assess the uptake of Cu²⁺ from aqueous solutions onto multi-walled carbon nanotubes (MWCNT). The potential of the t-MWCNT to remove Cu²⁺ cations from aqueous solutions was investigated in batch reactor under different experimental conditions. The processing parameters such as initial concentration of Cu²⁺ ions, temperature, and adsorbent mass were also investigated. Copper uptake was quantitatively evaluated using the Langmuir, Freundlich and Dubinin–Kaganer–Radushkevich (DKR) models. In addition, the adsorption equilibrium was described well by the Langmuir isotherm model with maximum adsorption capacity of 12.34 mg/g of Cu²⁺ cations on t-MWCNT. Various thermodynamic parameters, such as ΔG⁰, ΔH⁰ and ΔS⁰ were calculated. The thermodynamics of Cu²⁺ cations adsorption onto t-MWCNT system pointed at spontaneous and endothermic nature of the process. Using the second-order kinetic constants, the activation energy of adsorption (E_a) was determined as 27.187 kJ/mol according to the Arrhenius equation.     

Copper Adsorption on Chitosan-Derived Schiff Bases

The adsorption of Cu(II) ions onto the chitosan derived Schiff bases obtained from the condensation of chitosan with salicyaldehyde (polymer I), 2,4-dihydroxybenzaldehyde (polymer II) and with 4-(diethylamino) salicyaldehyde (polymer III) in aqueous solutions was investigated. Batch adsorption experiments were carried out as a function of contact time, pH, and polymer mass. The amount of metal-ion uptake of the polymers was determined by using atomic absorption spectrometry (AAS) and the highest Cu(II) ions uptake was achieved at pH 7.0 and by using sodium perchlorate as an ionic strength adjuster for polymers I, II, and III. The isothermal behavior and the kinetics of adsorption of Cu(II) ions on these polymers with respect to the initial mass of the polymer and temperature were also investigated; adsorption isothermal equilibrium data could be clearly explained by the Langmuir equation. The experimental data of the adsorption equilibrium from Cu(II) solution correlates well with the Langmuir isotherm equation.     

Removal of Cd(II), Cu(II), and Pb(II) by adsorption onto natural clay: a kinetic and thermodynamic study

In this work, we study the elimination of three bivalent metal ions (Cd²⁺, Cu²⁺, and Pb²⁺) by adsorption onto natural illitic clay (AM) collected from Marrakech region in Morocco. The characterization of the adsorbent was carried out by X-ray fluorescence, Fourier transform infrared spectroscopy and X-ray diffraction. The influence of physicochemical parameters on the clay adsorption capacity for ions Cd²⁺, Cu²⁺, and Pb²⁺, namely the adsorbent dose, the contact time, the initial pH imposed on the aqueous solution, the initial concentration of the metal solution and the temperature, was studied. The adsorption process is evaluated by different kinetic models such as the pseudo-first-order, pseudo-second-order, and Elovich. The adsorption mechanism was determined by the use of adsorption isotherms such as Langmuir, Freundlich, and Temkin models. Experiments have shown that heavy metals adsorption kinetics onto clay follows the same order, the pseudo-second order. The isotherms of adsorption of metal cations by AM clay are satisfactorily described by the Langmuir model and the maximum adsorption capacities obtained from the natural clay, using the Langmuir isotherm model equation, are 5.25, 13.41, and 15.90 mg/g, respectively for Cd(II), Cu(II), and Pb(II) ions. Adsorption of heavy metals on clay is a spontaneous and endothermic process characterized by a disorder of the medium. The values of ΔH are greater than 40 kJ/mol, which means that the interactions between clay and heavy metals are chemical in nature.     

Lead separation by sorption onto powdered marble waste

Batch adsorption experiments were carried out, aiming to remove lead ions from aqueous solutions and water samples using powdered marble wastes (PMW) as an effective inorganic sorbent, which is cheap, widespread, and may represent an environmental problem. The main parameters (i.e., solution pH, sorbent and lead concentration, shaking time, and temperature) influencing the sorption process, were investigated. The results obtained showed that the sorption of Pb²⁺ ions onto PMW was fitted well with the linear Freundlich and Langmuir models over the concentration range studied. From the Dubinin–Radushkevick (D–R) isotherm model it was found that the adsorption was chemical in nature. Thermodynamic parameters viz. the change in Gibbs free energy change (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) were also calculated. These parameters indicated that the adsorption process of Pb²⁺ ions on PMW was spontaneous and endothermic in nature. Under the optimum experimental conditions employed, the removal of about 100% of Pb²⁺ ions was attained. The procedure was successfully applied to remove lead ions from aqueous and different natural water samples. Moreover, the adsorption mechanism is suggested.     

PREPARATION AND CHARACTERIZATION OF NOVEL CHITOSAN DERIVATIVES:ADSORPTION EQUILIBRIUM OF IRON(Ⅲ)ION

The adsorption of Fe(Ⅲ)ions from aqueous solution by chitosan alpha-ketoglutaric acid(KCTS)and hydroxamated chitosan alpha-ketoglutaric acid(HKCTS)was studied in a batch adsorption system.Experiments were carried out as function of pH,temperature,agitation rate and concentration of Fe(Ⅲ)ions.The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and isotherm constants were determined.The Langmuir model agrees very well with experimental data.The pseudo-first-order and second-order kinetic models were used to describe the kinetic data and the rate constants were evaluated.The dynamical data fit well with the second-order kinetic model.The pseudo second-order kinetic model was indicated with the activation energy of 19.61 and 7.98 KJ/mol for KCTS and HKCTS,respectively.It is suggested that the overall rate of Fe(Ⅲ)adsorption is likely to be controlled by the chemical process.Results also showed that novel chitosan derivatives(KCTS and HKCTS)were favorable adsorbents.     

Insight into the performance of novel kaolinite-cellulose/cobalt oxide nanocomposite as green adsorbent for liquid phase abatement of heavy metal ions: Modelling and mechanism

A cost-efficient kaolinite-cellulose/cobalt oxide green nanocomposite (Kao-Cel/Co₃O₄ NC) was successfully synthesized, and utilized as a promising material for removing Pb²⁺ and Cd²⁺ from aqueous solution. The fabricated nanocomposite has been characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy-energy dispersive X-ray, high-resolution transmission electron microscopy, and Brunauer-Emmett-Teller analysis. The batch methodology was exploited for optimization of process parameters and the optimized conditions were found to be adsorbent dosage (2.0 g/L), extraction time (50 min), initial concentration (60 mg/L), and initial solution pH (6). Kao-Cel/Co₃O₄ NC displayed excellent adsorption properties and achieved maximum saturation capacity (Q_m) of 293.68 mg Pb²⁺/g and 267.85 mg Cd²⁺/g, with an equilibration time of 50 min at 323 K. The Langmuir model best expressed the isotherm data recommending the adsorption onto energetically homogeneous NC surface, while the compatibility of kinetics data with pseudo-second-order model revealed the dependency of adsorption rate on adsorption capacity, and probable involvement of chemisorption in the rate-controlling step. Electrostatic interaction and ion exchange mechanism were responsible for the uptake of Pb²⁺ and Cd²⁺ by Kao-Cel/Co₃O₄ NC as demonstrated by Fourier transform infrared spectroscopy and pH studies. Thermodynamic parameters confirmed the physical, spontaneous, and endothermic sequestration processes. Real water investigation specified that the present adsorbent could be effectively used for liquid phase decontamination of Pb²⁺ and Cd²⁺. The nanocomposite exhibited high reusability, which could be utilized efficiently for five runs with sustainable results. In summary, this study portrayed the present nanocomposite as an emerging material for the adsorption of heavy metal ions particularly Pb²⁺ and Cd²⁺.     

Cellulose/chitosan composites prepared in ethylene diamine/potassium thiocyanate for adsorption of heavy metal ions

Cellulose/chitosan composites were successfully prepared in a new and basic-based solvent system, ethylene diamine/potassium thiocyanate (EDA/KSCN), by dissolving cellulose and chitosan in 70/30 (w/w) EDA/KSCN at ?19 °C, and then coagulating in methanol. Wide angle X-ray diffraction studies revealed that the EDA/KSCN solvent system is capable of disrupting the hydrogen bonds in both cellulose and chitosan and increase the amorphous regions. Stability tests proved that the composites are stable in acidic aqueous solution due to the hydrogen bonds formed between cellulose and chitosan. This is the first time to dissolve chitosan in a basic-based solvent system and prepare cellulose/chitosan composites in a straightforward way. The adsorption of heavy metal ions (Cu²⁺, Cd²⁺, and Pb²⁺) onto the cellulose/chitosan composites was investigated. The adsorption capacity is highly dependent on pH and the maximum metal uptake was obtained at pH 5.0. Increasing initial metal concentration enhanced the diffusion of metal ions to the composite surface and therefore the metal removal efficiency. Higher percentage of chitosan in the composites also led to higher metal adsorption. The results indicated that the prepared cellulose/chitosan (1:1) composite can adsorb 0.53 mmol/g Cu²⁺, 0.28 mmol/g Cd²⁺ and 0.16 mmol/g Pb²⁺ ions at pH 5.0. The Freundlich model and the pseudo-second-order model were in good agreement with the adsorption isotherms and kinetics, respectively. X-ray photoelectron spectroscopy studies indicated that the binding of heavy metal ions is attributed to the nitrogen atoms of amino groups in chitosan. The composites can be reused for metal removal.     

A millimeter-sized negatively charged polymer embedded with molybdenum disulfide nanosheets for efficient removal of Pb(II) from aqueous solution

Molybdenum disulfide (MoS₂) has excellent trapping ability for lead ions whereas its micro-/nanoscale size has greatly impeded its practical applications in the flow-through systems. Herein, a millimeter-sized nanocomposite MoS2?001 was synthesized for Pb²⁺ removal by loading MoS₂ nanosheets into a polystyrene cation exchanger D-001 by a facile hydrothermal method. The proposed structure and adsorption mechanism of MoS₂?001 was confirmed by the scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) analysis. The nanocomposite showed outstanding adsorption capacity and rapid adsorption kinetic for Pb²⁺ removal, and the adsorption behavior followed the Langmuir adsorption model and pseudo-first-model kinetic model. Pb²⁺ uptake by MoS₂?001 still maintains a high level even in the presence of extremely highly competitive ions (Ca(II) and Mg(II)), suggesting its high selectivity for Pb²⁺ adsorption. Besides, the fixed-bed column experiments further certified that MoS₂?001 is of great potential for Pb²⁺ removal from the wastewater in practical engineering applications. Even more gratifying is that the exhausted MoS₂?001 can be regenerated by NaCl-EDTANa₂ solution without any significant adsorption capacity loss. Consequently, all the results indicated that MoS₂?001 is a promising candidate adsorbent for lead-containing wastewater treatment.     

Organoclay modified with lignin as a new adsorbent for removal of Pb2+ and UO2 2+

This study investigated a new adsorbent prepared from lignin modified organoclay for the removal of Pb²⁺ and UO₂ ²⁺ from aqueous solutions. The characterization of new adsorbent was performed by FT-IR and XRD. Adsorption of Pb²⁺ and UO₂ ²⁺ species in aqueous solution as a function of ion concentration, pH, temperature and time of adsorption was investigated in detail. The adsorption data were analyzed by using the Langmuir, Freundlich and Dubinin-Radushkevich models. The monolayer adsorption capacities of organoclay–lignin were 0.12 mol kg^?1 and 0.42 mol kg^?1 for Pb²⁺ and UO₂ ²⁺, respectively. The experimental kinetic data were analyzed by using pseudo-second-order kinetic and intra-particle diffusion models. The proposed adsorption mechanism follows a pseudo-second-order kinetic and endothermic because of increasing disorderliness at adsorbate/adsorbent interface.     

Efficiency of Acacia Gummifera powder as biosorbent for simultaneous decontamination of water polluted with metals

Biosorbent materials represent an interesting alternative to classic methods of metal removal from industrial effluents. Acacia biomass showed a higher absorption capacity for heavy metals than living biomass. This study aimed to evaluate the bioadsorption of Lead and Cadmium onto Acacia Gummifera gum, using batch experiment. The structural characterization of the biosorbent was carried out using FT-IR, SEM, BET, TGA and DSC analysis. The adsorption equilibrium was reached within 15 min. A maximum uptake of 18.3 mg.g⁻¹ Pb²⁺ and 9.57 mg.g⁻¹ Cd²⁺ was achieved at pH 6.5. The metal ions seemed to be removed exclusively by ion exchange, physical sorption and chelation. The biomass of A. Gummifera powder was found to be effective for lead and cadmium removal with respectively 97% and 86% sorption efficiency at a concentration of 100 mg/L, in aqueous media. Parameters affecting adsorption capacities such as biosorbent dosage, initial metal concentration, temperature, and pH are discussed in detail. Furthermore, adsorption thermodynamics, kinetics, and equilibrium were studied and fitted by different models. Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherms were used to compare adsorption data at equilibrium. The adsorption kinetics data were found to be best fitted by the pseudo-second-order model, and the adsorption isotherm was well fitted with the Langmuir model. The calculated thermodynamic parameters (ΔG⁰, ΔS⁰ and ΔH⁰) indicated a spontaneous and exothermic biosorption of both metal ions onto Acacia Gummifera. Moreover, chromatograms obtained by size exclusion chromatography coupled with multi-angle laser light scattering detection system (SECMALLS) showed the formation of complexes between the arabinogalactan-peptide (AGP) and glycoprotein (GP) Acacia moieties and the two studied metal ions. The analysis of the FTIR spectra of dried Acacia and that of Acacia loaded with lead and cadmium in aqueous media suggests that the surface functional groups such as amides and carboxy groups might be involved in the metal removal process.The extent of adsorption for both metals increased along with an increase of the A. Gummifera biomass dosage. A. Gummifera biomass, which is safe, of low-cost, and highly selective, seems therefore to be a promising substrate for simultaneous trapping of Pd and Cd ions in aqueous solutions.     

Adsorption of Cu2+ from aqueous solution onto iron oxide coated eggshell powder: Evaluation of equilibrium,isotherms, kinetics,and regeneration capacity

This study explored the adsorption behavior of Cu²⁺ onto iron oxide coated eggshell powder (IOESP) from aqueous solution. The effect of various operational parameters such as pH, contact time, initial adsorbate concentration, surfactant, and temperature on adsorption of Cu²⁺ ions was investigated using batch adsorption experiments. The optimum pH for Cu²⁺ adsorption was found to be 6.0. Kinetics of adsorption was found to follow the pseudo-second-order rate equation. The suitability of Langmuir and Freundlich adsorption models to the equilibrium data was investigated. The adsorption was well described by the Freundlich isotherm model indicating the presence of heterogeneous sites for Cu²⁺ adsorption. The adsorption of Cu²⁺ was increased in the presence of anionic surfactant (SDS) while cationic surfactant (CTAB) shows no significant change in adsorption capacity. Thermodynamic parameters showed that the adsorption of Cu²⁺ onto IOESP was feasible, spontaneous, and exothermic. Regeneration studies were performed using HCl, HCOOH, EDTA, and NaOH as eluting agent for Cu²⁺ desorption from saturated IOESP and the maximum regeneration was observed with HCl.     

PREPARATION AND CHARACTERIZATION OF NOVEL CHITOSAN DERIVATIVES: ADSORPTION EQUILIBRIUM OF IRON(Ⅲ) ION

The adsorption of Fe(Ⅲ)ions from aqueous solution by chitosan alpha-ketoglutaric acid(KCTS)and hydroxamated chitosan alpha-ketoglutaric acid(HKCTS)was studied in a batch adsorption system.Experiments were carried out as function of pH,temperature,agitation rate and concentration of Fe(Ⅲ)ions.The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and isotherm constants were determined.The Langmuir model agrees very well with experimental data.The pseudo-first-order and second-order kinetic models were used to describe the kinetic data and the rate constants were evaluated.The dynamical data fit well with the second-order kinetic model.The pseudo second-order kinetic model was indicated with the activation energy of 19.61 and 7.98 kJ/mol for KCTS and HKCTS,respectively.It is suggested that the overall rate of Fe(Ⅲ)adsorption is likely to be controlled by the chemical process.Results also showed that novel chitosan derivatives(KCTS and HKCTS)were favorable adsorbents.     

Removal of Cobalt Ions from Aqueous Solution by Adsorption onto Cross-Linked Calcium Alginate Beads

The removal of cobalt ions from dilute aqueous solutions using cross linked calcium alginate beads as the adsorbent is reported in this article. The influence of various experimental parameters such as pH, initial metal ion concentration, contact time and solid to liquid ratio were studied. The adsorption data were applied to Langmuir and Freundlich isotherm equations and various static parameters were calculated. It was observed that the uptake of cobalt ions was found to increase with time and that maximum adsorption was obtained within the first 60 minutes of the process. These results indicate that the cross linked calcium alginate beads have potential for removing cobalt ions from industrial waste water.     

Fluoride removal using lanthanum incorporated chitosan beads

Highly selective material based on naturally occurring biomaterial namely chitosan has been designed for the defluoridation of water. Lanthanum incorporated chitosan beads (LCB) were prepared using precipitation method. The synthesis was optimized by varying different synthesis parameters namely lanthanum loading, complexation and precipitation time, strength of ammonia solution used for precipitation, drying time, etc. Lanthanum incorporated chitosan beads were characterized using SEM, FTIR, XRD and EDX. Surface area of LCB was observed to be 2.76 m² g⁻¹. The equilibrium adsorption data fitted well to Langmuir adsorption isotherm and showing maximum fluoride adsorption capacity of 4.7 mg g⁻¹ with negligible lanthanum release. Kinetic study reveals that adsorption of fluoride is fast and follows pseudo-first-order kinetics. The effect of pH was also studied and the best efficiency was observed at pH 5. Presence of sulphate, nitrate and chloride marginally affected the removal efficiency, however drastic reduction in fluoride uptake was observed in the presence of carbonate and bicarbonate. Negative value of change in free energy (ΔG°) and positive value of change in entropy (ΔS°) suggest the adsorption of fluoride by LCB is feasible and spontaneous process. Positive value of change in enthalpy (ΔH°) suggests the process of fluoride adsorption is endothermic in nature. Regeneration study reveals that 1 M ammonium chloride solution appears to be the promising regeneration media showing 81.22% regeneration. The adsorption capacity of LCB was similar in fluoride-contaminated ground water collected from Dhar district of Madhya Pradesh, India, as compared to simulated water.