Synthesis and characterization of new complexes of the type [Ru(CO)2Cl2 (2‐phenyl‐1,8‐naphthyridine‐kN) (2‐phenyl‐1,8‐naphthyridine‐kN′)]. Preliminary applications in homogeneous catalysis

Novel ruthenium (II) complexes were prepared containing 2‐phenyl‐1,8‐naphthyridine derivatives. The coordination modes of these ligands were modified by addition of coordinating solvents such as water into the ethanolic reaction media. Under these conditions 1,8‐naphthyridine (napy) moieties act as monodentade ligands forming unusual [Ru(CO)₂Cl₂(η¹‐2‐phenyl‐1,8‐naphthyridine‐ kN )(η¹‐2‐phenyl‐1,8‐naphthyridine‐kN′)] complexes. The reaction was reproducible when different 2‐phenyl‐1,8‐naphthyridine derivatives were used. On the other hand, when dry ethanol was used as the solvent we obtained complexes with napy moieties acting as a chelating ligand. The structures proposed for these complexes were supported by NMR spectra, and the presence of two ligands in the [Ru(CO)₂Cl₂(η¹‐2‐phenyl‐1,8‐naphthyridine‐ kN )(η¹‐2‐phenyl‐1,8‐naphthyridine‐kN′)] type complexes was confirmed using elemental analysis. All complexes were tested as catalysts in the hydroformylation of styrene showing moderate activity in N,N′‐dimethylformamide. Copyright © 2008 John Wiley & Sons, Ltd.     

α‐Diamine Nickel Catalysts with Nonplanar Chelate Rings for Ethylene Polymerization

A series of novel α‐diamine nickel complexes, (ArNH‐C(Me)‐(Me)C‐NHAr)NiBr₂, 1 : Ar=2,6‐diisopropylphenyl, 2 : Ar=2,6‐dimethylphenyl, 3 : Ar=phenyl), have been synthesized and characterized. X‐ray crystallographic analysis showed that the coordination geometry of the α‐diamine nickel complexes is markedly different from conventional α‐diimine nickel complexes, and that the chelate ring (N‐C‐C‐N‐Ni) of the α‐diamine nickel complex is significantly distorted. The α‐diamine nickel catalysts also display different steric effects on ethylene polymerization in comparison to the α‐diimine nickel catalyst. Increasing the steric hindrance of the α‐diamine ligand by substitution of the o‐methyl groups with o‐isopropyl groups leads to decreased polymerization activity and molecular weight; however, catalyst thermal stability is significantly enhanced. Living polymerizations of ethylene can be successfully achieved using 1 /Et₂AlCl at 35 °C or 2 /Et₂AlCl at 0 °C. The bulky α‐diamine nickel catalyst 1 with isopropyl substituents can additionally be used to control the branching topology of the obtained polyethylene at the same level of branching density by tuning the reaction temperature and ethylene pressure.     

Supported Organometallic Complexes. XXXVI [1] Diaminediphosphineruthenium(II) Interphase Catalysts for the Hydrogenation of α, β‐Unsaturated Ketones

The T—silyl functionalized diamine‐bis(ether‐phosphine)ruthenium(II) complexes 1a(T ° ) — 1g(T ° ) (Scheme 1) were sol‐gel processed in the presence of different amounts of the co‐condensation agents CH₃Si(OMe)₃ (Me—T ° ) and (MeO)₂SiMe—(CH₂)₆—MeSi(OMe)₂ (D ° —C₆—D ° ) to produce a library of the interphase catalysts X1a — X1c , X2a — X2g , and X3a — X3g . Due to the remarkable electronic and steric effects of the co‐ligands on the catalytic activity of such complexes, a series of aliphatic and aromatic diamines was selected. The new polymers were investigated by multinuclear CP/MAS solid‐state NMR spectroscopy as well as by EXAFS, EDX, SEM, and BET methods. Selected interphase catalysts show high activities and selectivities in the hydrogenation of trans‐4‐phenyl‐3‐butene‐2‐one.     

The psuedo‐michael reaction of 2‐aminoimidazolines 2. Part 1. Synthesis and structure assignment of isomeric 5(1H)‐Oxo and 7(1H)‐Oxo‐2,3‐dihydroimidazo[1,2‐a]pyrimidine‐6‐carboxylates

The pseudo‐Michael reaction of 1‐aryl‐2‐aminoimidazolines‐2 with diethyl ethoxymethylenemalonate (DEEM) was investigated. Extensive structural studies were performed to confirm the reaction course. For derivatives with N1 aromatic substituents, it was found that the reaction course was temperature dependent. When the reaction temperature was held at ?10 °C only the formation of 1‐aryl‐7(1H)‐oxo‐2,3‐dihydroimi‐dazo[1,2‐a]pyrimidine‐6‐carboxylates ( 4 ) was observed in contrast to earlier suggestions. Under the room temperature conditions, the same reaction yielded mixtures, with varying ratio, of isomeric 1‐aryl‐7(1H)‐oxo‐ ( 4a‐4f ) and 1‐aryl‐5(1H)‐oxo‐2,3‐dihydroimidazo[1,2‐a]pyrimidine‐6‐carboxylates ( 5a‐5f ). The molecular structure of selected isomers, 4b and 5c , was confirmed by X‐ray crystallography. Frontal chro‐matography with delivery from the edge was applied for the separation of the isomeric esters. The isomer ratio of the reaction products depended on the character of the substituents on the phenyl ring. The 1‐aryl‐7(1H)‐oxo‐carboxylates ( 4a‐4f ) were preferably when the phenyl ring contained H, 4‐CH₃, 4‐OCH₃ and 3,4‐Cl₂ substituents. Chloro substitution at either position 3 or 4 in the phenyl ring favored the formation of isomers 5a‐5f . The isomer ratios were confirmed both by ¹H NMR and chromatography. The reaction of the respective hydrobromides of 1‐aryl‐2‐aminoimidazoline‐2 with DEEM, in the presence of triethylamine, gave selectively 5(1H)‐oxo‐esters ( 5a‐5f ).     

[η6‐1‐Chloro‐2‐(pyrrolidin‐1‐yl)benzene](η5‐cyclopentadienyl)iron(II) hexafluoridophosphate and (η5‐cyclopentadienyl){2‐[η6‐2‐(pyrrolidin‐1‐yl)phenyl]phenol}iron(II) hexafluoridophosphate

In the complex salt [η⁶‐1‐chloro‐2‐(pyrrolidin‐1‐yl)benzene](η⁵‐cyclopentadienyl)iron(II) hexafluoridophosphate, [Fe(C₅H₅)(C₁₀H₁₂ClN)]PF₆, (I), the complexed cyclopentadienyl and benzene rings are almost parallel, with a dihedral angle between their planes of 2.3 (3)°. In a related complex salt, (η⁵‐cyclopentadienyl){2‐[η⁶‐2‐(pyrrolidin‐1‐yl)phenyl]phenol}iron(II) hexafluoridophosphate, [Fe(C₅H₅)(C₁₆H₁₇NO)]PF₆, (II), the analogous angle is 5.4 (1)°. In both complexes, the aromatic C atom bound to the pyrrolidine N atom is located out of the plane defined by the remaining five ring C atoms. The dihedral angles between the plane of these five ring atoms and a plane defined by the N‐bound aromatic C atom and two neighboring C atoms are 9.7 (8) and 5.6 (2)° for (I) and (II), respectively.     

3,5‐Di­amino‐6‐(2‐fluoro­phenyl)‐1,2,4‐triazine–di­methyl­form­amide (1/1)

The title compound, C₉H₈FN₅·C₃H₇NO, contains two independent complexes in the asymmetric unit, each consisting of one 3,5‐di­amino‐6‐(2‐fluoro­phenyl)‐1,2,4‐triazine mol­ecule and one di­methyl­form­amide solvent mol­ecule. One triazine mol­ecule is disordered over two conformations within the crystal, the occupancies being 62 (1) and 38 (1)%. The phenyl ring of this mol­ecule resolves into two conformations rotated by almost 180° about the bridging bond between the two rings, while the triazine rings approximately superimpose on each other. The triazine mol­ecules of the asymmetric unit differ in the dihedral angles between their respective phenyl and triazine ring planes, these being 57.6 (2)° for the fully occupied, and 76.9 (6) and 106.8 (8)° for the partially occupied mol­ecules. An extensive network of hydrogen bonds maintains the crystal structure.     

Titanium(IV) Bromide and Boron(III) Tribromide Promoted Baylis‐Hillman Reactions of Arylaldehydes with But‐3‐yn‐2‐one

The reaction of arylaldehydes with but‐3‐yn‐2‐one in the presence of the Lewis acids titanium(IV) bromide (TiBr₄) or boron(III) tribromide (BBr₃) (1.4 equiv.) can be drastically affected by the reaction temperature. When the reaction was carried out at ≤−20°, the brominated compound 1 was obtained as the major product. However, when the reaction was carried out at room temperature (20°), both the brominated compound 1 and dibrominated compound 2 were formed as major products. The substituent on the phenyl ring can affect the (E)/(Z) ratio. Moreover, with 2 as the substrate, the Pd‐catalyzed allylic substitution and Suzuki‐type coupling reaction have been examined.     

Methyl 3‐(4‐methoxyphenyl)prop‐2‐enoate

The title mol­ecule, C₁₁H₁₂O₃, is almost planar, with an average deviation of the C and O atoms from the least‐squares plane of 0.146 (4) Å. The geometry about the C=C bond is trans. The phenyl ring and –COOCH₃ group are twisted with respect to the double bond by 9.3 (3) and 5.6 (5)°, respectively. The endocyclic angle at the junction of the propenoate group and the phenyl ring is decreased from 120° by 2.6 (2)°, whereas two neighbouring angles around the ring are increased by 2.3 (2) and 0.9 (2)°. This is probably associated with the charge‐transfer interaction of the phenyl ring and –COOCH₃ group through the C=C double bond. The mol­ecules are joined together through C—H?O hydrogen bonds between the methoxy and ester groups to form characteristic zigzag chains extended along the c axis.     

Two (Z)‐N‐aryl‐3‐benzylideneisoindolin‐1‐ones

Two isoindolin‐1‐one derivatives, (Z)‐3‐benzyl­idene‐N‐phenyl­isoindolin‐1‐one, C₂₁H₁₅NO, (II), and (Z)‐3‐benzyl­idene‐N‐(4‐methoxy­phenyl)­isoindolin‐1‐one, C₂₂H₁₇NO₂, (III), were synthesized by the palladium‐catalysed heteroannulation. The mol­ecules of both compounds have a Z configuration. The interplanar angles between the five‐ and six‐membered rings of the isoindolinone moiety in (II) and (III) are 1.66 (11) and 2.26 (7)°, respectively. The phenyl rings at the N‐position in (II) and (III) are twisted out of the C₄N ring plane by 62.77 (11) and 67.10 (7)°, respectively. The substitutions at the N and C‐3 positions of the isoindolinone system have little influence on the molecular dimensions of the resulting compounds.     

Synthesis of new substituted 5‐methyl‐3,5‐diphenylimidazolidine‐2,4‐diones from substituted 1‐(1‐cyanoethyl‐1‐phenyl)‐3‐phenylureas

The reaction of substituted phenyl isocyanates with 2‐amino‐2‐phenylpropanenitrile and 2‐amino‐2‐(4‐nitrophenyl)propanenitrile has been used to prepare substituted 1‐(1‐cyanoethyl‐1‐phenyl)‐3‐phenylureas. In anhydrous phosphoric acid the first products to be formed from 1‐(1‐cyanoethyl‐1‐phenyl)‐3‐phenylureas are phosphates of 4‐methyl‐4‐phenyl‐2‐phenylimino‐5‐imino‐4,5‐dihydro‐1,3‐oxazoles, which on subsequent hydrolysis give the respective ureidocarboxylic acids. On prolongation of the reaction time, the phosphates of 4‐methyl‐4‐phenyl‐2‐phenylimino‐5‐imino‐4,5‐dihydro‐1,3‐oxazoles rearrange to give phosphates of 5‐methyl‐4‐imino‐3,5‐diphenylimidazolidin‐2‐ones, and these are subsequently hydrolysed to the respective substituted 5‐methyl‐3,5‐diphenylimidazolidin‐2,4‐diones. The ureidocarboxylic acids were also prepared by alkaline hydrolysis of 5‐methyl‐3,5‐diphenylimidazolidin‐2,4‐diones. The 5‐methyl‐3,5‐diphenylimidazolidin‐2,4‐diones and ureidocarboxylic acids were characterised by their ¹H and ¹³C NMR spectra. Structure of the 5‐methyl‐5‐(4‐nitrophenyl)‐3‐phenylimidazolidine‐2,4‐dione was verified by X‐ray diffraction. The alkaline hydrolysis of individual imidazolidine‐2,4‐diones was studies spectrophoto‐metrically in sodium hydroxide solutions at 25 °C. The rate‐limiting step of the base catalysed hydrolysis consists in decomposition of the tetrahedral intermediate. The reaction is faster if electron‐acceptor sub‐stituents are present in the 3‐phenyl group of imidazolidine‐2,4‐dione cycle. The pK_a values of individual 5‐methyl‐3,5‐diphenylimidazolidine‐2,4‐diones have been determined kinetically.     

(E)‐N‐Benzyl­idene‐3‐chloro‐4‐fluoro­aniline

The title mol­ecule, C₁₃H₉ClFN, is substantially planar. The phenyl and 3‐chloro‐4‐fluoro­phenyl rings are on opposite sides of the C=N bond. There is an intermolecular C—H?F short contact with a C?F distance of 3.348 (2) Å and a C—H?F angle of 137.4 (1)°. The mol­ecules are held in layers parallel to the bc plane.     

Hiyama cross‐coupling reaction catalyzed by a palladium salt of 1‐benzyl‐4‐aza‐1‐azoniabicyclo[2.2.2]octane chloride under microwave irradiation

An efficient catalytic system using 1‐benzyl‐4‐aza‐1‐azoniabicyclo[2.2.2]octane chloride ((BeDABCO)₂Pd₂Cl₆) was developed for the Hiyama cross‐coupling reaction of various aryl halides with triethoxy(phenyl)silane. The substituted biaryls were produced in excellent yields in short reaction times using a catalytic amount of this catalyst in NMP at 100 °C. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis,characterization and α‐amylase and α‐glucosidase inhibition studies of novel vanadyl chalcone complexes

A series of chalcone ligands and their corresponding vanadyl complexes of composition [VO (L^I–IV)₂(H₂O)₂]SO₄ (where L^I = 1,3‐Diphenylprop‐2‐en‐1‐one, L^II = 3‐(2‐Hydroxy‐phenyl)‐1‐phenyl‐propenone, L^III = 3‐(3‐Nitro‐phenyl)‐1‐phenyl‐propenone, L^IV = 3‐(4‐Methoxy‐phenyl)‐1‐phenyl‐propenone) have been synthesized and characterized using various spectroscopic (Fourier‐transform infrared, electrospray ionization mass, nuclear magnetic resonance, electron paramagnetic resonance, thermogravimetric analysis, vibrating sample magnetometer) and physico‐analytic techniques. Antidiabetic activities of synthesized complexes along with chalcones were evaluated by performing in vitro and in silico α‐amylase and α‐glucosidase inhibition studies. The obtained results displayed moderate to significant inhibition activity against both the enzymes by vanadyl chalcone complexes. The most potent complexes were further investigated for the enzyme kinetic studies and displayed the mixed inhibition for both the enzymes. Further, antioxidant activity of vanadyl chalcone complexes was evaluated for their efficiency to release oxidative stress using 2,2‐diphenyl‐1‐picryl‐hydrazyl‐hydrate assay, and two complexes (Complexes 2 and 4 ) have demonstrated remarkable antioxidant activity. All the complexes were found to possess promising antidiabetic and antioxidant potential.     

Reactions of Stable α‐Chlorosulfanyl Chlorides with CS‐Functionalized Compounds

The smooth reaction of 3‐chloro‐3‐(chlorosulfanyl)‐2,2,4,4‐tetramethylcyclobutanone ( 3 ) with 3,4,5‐trisubstituted 2,3‐dihydro‐1H‐imidazole‐2‐thiones 8 and 2‐thiouracil ( 10 ) in CH₂Cl₂/Et₃N at room temperature yielded the corresponding disulfanes 9 and 11 (Scheme 2), respectively, via a nucleophilic substitution of Cl^? of the sulfanyl chloride by the S‐atom of the heterocyclic thione. The analogous reaction of 3‐cyclohexyl‐2,3‐dihydro‐4,5‐diphenyl‐1H‐imidazole‐2‐thione ( 8b ) and 10 with the chlorodisulfanyl derivative 16 led to the corresponding trisulfanes 17 and 18 (Scheme 4), respectively. On the other hand, the reaction of 3 and 4,4‐dimethyl‐2‐phenyl‐1,3‐thiazole‐5(4H)‐thione ( 12 ) in CH₂Cl₂ gave only 4,4‐dimethyl‐2‐phenyl‐1,3‐thiazol‐5(4H)‐one ( 13 ) and the trithioorthoester derivative 14 , a bis‐disulfane, in low yield (Scheme 3). At ?78°, only bis(1‐chloro‐2,2,4,4‐tetramethyl‐3‐oxocyclobutyl)polysulfanes 15 were formed. Even at ?78°, a 1 : 2 mixture of 12 and 16 in CH₂Cl₂ reacted to give 13 and the symmetrical pentasulfane 19 in good yield (Scheme 5). The structures of 11, 14, 17 , and 18 have been established by X‐ray crystallography.     

1‐[4‐(Methyl­sulfonyl)­phenyl]‐5‐phenyl‐1H‐pyrazole derivatives

Three related compounds containing a pyrazole moiety with vicinal phenyl rings featuring a methyl­sulfonyl substituent are described, namely 3‐methyl‐1‐[4‐(methyl­sulfonyl)­phenyl]‐5‐phenyl‐1H‐pyrazole, C₁₇H₁₆N₂O₂S, ethyl 1‐[4‐(methyl­sul­fonyl)­phenyl]‐5‐phenyl‐1H‐pyrazole‐3‐carboxyl­ate, C₁₉H₁₈N₂O₄S, and 1‐[4‐(methyl­sulfonyl)­phenyl]‐3‐[3‐(morpholino)­phenoxy­methyl]‐5‐phenyl‐1H‐pyrazole, C₂₇H₂₇N₃O₄S. The design of these compounds was based on celecoxib, a selective cyclo­oxy­genase‐2 (COX‐2) inhibitor, in order to study the influence of various substituents on COX‐2 and 5‐lipoxy­genase (5‐LOX) inhibition.     

2,3‐Di(2‐pyridyl)‐5‐phenylpyrazine: A NN‐CNN‐Type Bridging Ligand for Dinuclear Transition‐Metal Complexes

A new bridging ligand, 2,3‐di(2‐pyridyl)‐5‐phenylpyrazine (dpppzH), has been synthesized. This ligand was designed so that it could bind two metals through a NN‐CNN‐type coordination mode. The reaction of dpppzH with cis‐[(bpy)₂RuCl₂] (bpy=2,2′‐bipyridine) affords monoruthenium complex [(bpy)₂Ru(dpppzH)]²⁺ ( 12+ ) in 64 % yield, in which dpppzH behaves as a NN bidentate ligand. The asymmetric biruthenium complex [(bpy)₂Ru(dpppz)Ru(Mebip)]³⁺ ( 23+ ) was prepared from complex 12+ and [(Mebip)RuCl₃] (Mebip=bis(N‐methylbenzimidazolyl)pyridine), in which one hydrogen atom on the phenyl ring of dpppzH is lost and the bridging ligand binds to the second ruthenium atom in a CNN tridentate fashion. In addition, the RuPt heterobimetallic complex [(bpy)₂Ru(dpppz)Pt(C?CPh)]²⁺ ( 42+ ) has been prepared from complex 12+ , in which the bridging ligand binds to the platinum atom through a CNN binding mode. The electronic properties of these complexes have been probed by using electrochemical and spectroscopic techniques and studied by theoretical calculations. Complex 12+ is emissive at room temperature, with an emission λ_max=695 nm. No emission was detected for complex 23+ at room temperature in MeCN, whereas complex 42+ displayed an emission at about 750 nm. The emission properties of these complexes are compared to those of previously reported Ru and RuPt bimetallic complexes with a related ligand, 2,3‐di(2‐pyridyl)‐5,6‐diphenylpyrazine.     

Herstellung von 1,2,4‐Trithiolan‐, 1,2,4,5‐Tetrathian‐ sowie 1,2,3,5,6‐Pentathiepan‐S‐oxiden und deren Reaktionen mit (Ph3P)2Pt(η2‐C2H4). Kristallstrukturanalyse von 3,3,5,5‐Tetraphenyl‐1,2,4‐trithiolan‐1‐oxid

Metal Complexes of Functionalized Sulfur‐containing Ligands. XVII Synthesis of S ‐Oxides of 1,2,4‐Trithiolane, 1,2,4,5‐Tetrathiane as well as 1,2,3,5,6‐Pentathiepane, and their Reactions with (Ph₃P)₂Pt(η²‐C₂H₄). X‐Ray Structure Analysis of 3,3,5,5‐Tetraphenyl‐1,2,4‐trithiolane 1‐oxide 3,3,5,5‐Tetraphenyl‐1,2,4‐trithiolan ( 1 ) was oxidized using m‐chloroperbenzoic acid to give, selectively, the 3,3,5,5‐tetraphenyl‐1,2,4‐trithiolane 1‐oxide ( 2 ). 2 was characterized structurally. The reaction of octamethyl tetrathiadispiro[3.2.3.2]dodecane‐2,9‐dione ( 3 ) with trifluoroperacetic acid at –50 °C yielded the corresponding 5‐oxide 4 . Oxidation of octamethyl pentathiadispiro[3.3.3.2]tridecane‐2,9‐dione ( 5 ) with m‐chloroperbenzoic acid at 0 °C gave the 12‐oxide 6 . Treatment of 2 with two equivalents of (Ph₃P)₂Pt(η²‐C₂H₄) ( 7 ) afforded a mixture (1 : 1) of the complexes (Ph₃P)₂PtSCPh₂S ( 8 ) and (Ph₃P)₂Pt(η²‐Ph₂C=S=O) ( 9 ), respectively.     

2′‐Hydroxy‐4′′‐dimethylaminochalcone

The title compound, 3‐[4‐(di­methyl­amino)­phenyl]‐1‐(2‐hydroxy­phenyl)­prop‐2‐en‐1‐one, C₁₇H₁₇NO₂, is a chalcone derivative substituted by 2′‐hydroxyl and 4′′‐di­methyl­amino groups. The crystal structure indicates that the aniline and hydroxy­phenyl groups are nearly coplanar, with a dihedral angle of 10.32 (16)° between their phenyl rings. The molecular planarity of this substituted chalcone is strongly affected by the 2′‐hydroxyl group.     

Two N‐substituted 3,5‐diphenyl‐2‐pyrazoline‐1‐thiocarboxamides

The structures of N‐ethyl‐3‐(4‐fluoro­phen­yl)‐5‐(4‐methoxy­phen­yl)‐2‐pyrazoline‐1‐thio­carboxamide, C₁₉H₂₀FN₃OS, (I), and 3‐(4‐fluoro­phen­yl)‐N‐methyl‐5‐(4‐methyl­phen­yl)‐2‐pyrazoline‐1‐thio­carboxamide, C₁₈H₁₈FN₃S, (II), have similar geometric parameters. The meth­oxy/methyl‐substituted phenyl groups are almost perpendicular to the pyrazoline (pyraz) ring [inter­planar angles of 89.29 (8) and 80.39 (10)° for (I) and (II), respectively], which is coplanar with the fluoro­phenyl ring [inter­planar angles of 5.72 (9) and 10.48 (10)°]. The pyrazoline ring approximates an envelope conformation in both structures, with the two‐coordinate N atom involved in an intra­molecular N—H⋯N_pyraz inter­action. In (I), N—H⋯O and C—H⋯S inter­molecular hydrogen bonds are the primary inter­actions, whereas in (II), there are no intermolecular hydrogen bonds.     

Polymorphism vs. Desmotropy: The Cases of 3‐Phenyl‐ and 5‐Phenyl‐ 1H‐pyrazoles and 3‐Phenyl‐1H‐indazole

Two desmotropes, 3‐phenyl‐1H‐pyrazole ( 1a ) and 5‐phenyl‐1H‐pyrazole ( 1b ) have been isolated and the conditions for their interconversion established. The X‐ray structure of 1b has been determined (a=10.862(1), b=5.7620(5), c=12.927(2) Å, β=111.435(2)°, space group P2₁/c), and both tautomers 1a and 1b were characterized by NMR in the solid state (¹³C‐ and ¹⁵N‐CPMAS). In the case of 3‐phenyl‐1H‐indazole ( 2a ), two concomitant polymorphs have been analyzed by X‐ray crystallography, and their NMR spectral properties were determined. The low‐melting‐point polymorph, at 106.7°, contains three molecules in the asymmetric unit (a=41.086(1), b=7.3860(2), c=23.391(1) Å, β=117.697(1)°, space group C2/c) and the high‐melting‐point one, 115.3°, six molecules (a=13.7818(4), b=13.7976(5), c=18.9445(5) Å, α=94.300(3), β=95.131(3), γ=119.428(3)°, space group P‐1). Here, too, it has been experimentally determined how to transform one form into the other. Density‐functional‐theory calculations at the B3LYP/6‐31G** level have been performed in both examples to rationalize the stability of the different tautomers.