Physicochemical aspects of drug delivery and release from polymer-based colloids

Recent advances in the preparation/loading, surface properties, and applications of polymer-based colloidal drug delivery and release systems, such as block copolymer micelles, polymer nano- and microparticles, polymer-modified liposomes, and chemical and physical hydrogels are presented. Drug release from polymer-based systems is affected by the drug–polymer interactions as well as the polymer microstructure and dissociation/erosion properties. Surface modification with poly(ethylene oxide) has become common in improving the biocompatibility and biodistribution of drug delivery carriers. Site-specific drug delivery can be achieved by polymer-based colloidal drug carriers when ligands of targeting information are attached on the carrier surface or when a phase transition is induced by an external stimulus. While significant progress in being made, many challenges remain in preserving the biological activity and attaining the desired drug release properties, especially for protein and DNA drugs.     

Advanced Materials Based on Polymers and Ionic Liquids

Ionic liquids (ILs) are ambient temperature molten salts, which have attracted considerable attention owing to their unique properties. In this contribution, we review advanced materials composed of ILs and polymers for the basis of a new design protocol to fabricate novel materials. As electrolytes for electrochemical devices, cross‐linked polymers containing ILs (ion gels) are endowed with functional properties inherited from ILs and mechanical consistency derived from polymers. To create such materials, micro‐phase separation of block copolymers and colloidal arrays in the ILs are utilized. Based on the molecular design of task‐specific ILs, the resultant ion gels are applicable as electrolytes for actuator, fuel cell, and secondary battery applications. Thermo‐ and photo‐responsive polymers in ILs are also highlighted, whereby such stimuli elicit changes in the solubility of the self‐assembly of block copolymers and colloidal arrays in the ILs. Further, thermo‐ and photo‐reversible changes in the self‐assembled structure can be exploited to demonstrate sol‐gel transitions and fabricate photo‐healable materials.     

甲壳型液晶高分子研究进展与展望

简要介绍了甲壳型液晶高分子的模型理论, 概述了当前国内外对甲壳型液晶高分子设计、 液晶相态、 性质及基于甲壳型液晶高分子的嵌段共聚物体系的设计和自组装性质等研究进展, 展望了今后的研究方向.     

Sphere-to-cylinder transition in hierarchical electrostatic complexes

We report on the formation of colloidal complexes resulting from the electrostatic co-assembly between anionic surfactants and cationic polyelectrolytes or block copolymers. Combining light and X-ray scattering experiments with cryogenic transmission and optical microscopy, we emphasize a feature rarely addressed in the formation of the electrostatic complexes, namely the role of the mixing concentration on the microstructure. At low mixing concentration, electrostatic complexes made from cationic-neutral copolymers and alkyl sulfate surfactants exhibit spherical core-shell microstructures. With increasing concentration, the complexes undergo a sphere-to-cylinder transition, yielding elongated aggregates with diameter 50 nm and length up to several hundreds of nanometers. From the comparison between homo- and diblock polymer phase behaviors, it is suggested that the unidimensional growth is driven by the ability of the surfactant to self-assemble into cylindrical micelles when complexed with cationic polymers.     

全共轭聚噻吩类和聚硒吩类嵌段共聚物的凝聚态结构调控

嵌段共聚物可发生微相分离形成丰富的介观尺度上的相结构,而共轭聚合物是一类具有特殊的力学、导电性能或光电功能的半刚性链高分子.全共轭嵌段共聚物因其兼具两者的特性而备受瞩目.本文着重介绍了近年来课题组在基于全共轭聚(3-烷基噻吩)和聚(3-烷基硒吩)嵌段共聚物体系的研究进展,通过改变体系的分子结构包括主侧链结构、侧链的烷基长度及取代基团等以及对体系在溶液状态及薄膜状态进行后处理包括改变溶剂、热处理、溶剂蒸气处理等来调控体系的微相分离行为和结晶行为,实现对材料凝聚态结构的调控.在此基础上,以有机场效应晶体管和聚合物太阳能电池器件作为最终体现聚噻吩或聚硒吩类体系凝聚态结构与性能关系的平台,将获得的调控体系凝聚态结构的有效策略用于实现其半导体材料物理性能的提升.     

Theoretical study of cooperativity in multivalent polymers for colloidal stabilization

Multivalent polymers, i.e., copolymers with multiple binding sites, have been proposed recently for stabilization of fusogentic liposomes and other liposomal colloids useful for drug delivery. The performance of such polymers critically depends on their molecular architecture, in particular the strength and frequency of surface anchoring sites along the backbone of a highly soluble polymer. In this work, we investigate the adsorption and surface forces due to multivalent polymers based on coarse-grained polymer models. We find that for W-type polymers that form dangling tails when all anchoring segments are attached to a surface, increasing the chain length at fixed polymer composition leads to a stronger repulsive barrier in the polymer-mediated surface forces thereby increasing the ability of the polymer to stabilize colloidal particles. This prediction conforms to an earlier experiment indicating that increasing the number of hydrophobic anchors along poly(ethylene glycol) polymers results in the cooperative behavior for both surface adsorption and steric stabilization. For M-type multivalent polymers that have weakly anchoring sites placed at the ends, however, addition of binding sites at fixed polymer composition could lead to negative cooperativity, i.e., the more binding sites, the less the amount of adsorption or the weaker the ability of surface protection. The theory also predicts that polymers with two anchoring sites (e.g., telechelic copolymers) are most efficient for colloidal stabilization.     

开环易位聚合合成瓶刷聚合物

瓶刷聚合物是一类具有独特侧链结构的梳形聚合物。功能性瓶刷聚合物在光子晶体、表面活性剂、医药载体、防污涂层以及智能材料等领域具有良好的应用价值。通过开环易位聚合合成瓶刷聚合物的方法具有合成步骤简单、聚合物接枝密度高和侧链组成均一等优点,在控制聚合物组成、分子量和分散性等方面具有显著优势。本文基于开环易位聚合,简述了合成瓶刷均聚物以及嵌段型、混合型和核-壳型三种类型的瓶刷共聚物的方法,并介绍了合成精确结构的瓶刷聚合物的新进展。     

PEO-PPO嵌段聚醚的聚集行为及其在药物载体领域的应用

聚氧乙烯-聚氧丙烯(PEO-PPO)嵌段聚醚是一类非离子型高分子表面活性剂,其结构具有很多独特之处:分子结构具有丰富的可设计性,强烈的温度依赖的胶束化行为以及溶剂选择的多样性,这些都极大丰富了其在溶液中自组装形成聚集体的研究内容。本文结合本课题组的工作着重综述了近期国内外有关线型和支状PEO-PPO嵌段聚醚在水溶液中聚集特性的研究进展,以及酸/碱、无机盐、醇类、小分子表面活性剂和聚合物等添加剂对其聚集行为的影响。PEO-PPO嵌段聚醚具有良好的生物相容性,在水溶液中能形成以PPO链段为疏水内核, PEO链段为亲水外壳的胶束结构,该结构非常适于作为疏水药物的载体。因此本文还综述了此类嵌段聚醚作为药物载体方面的研究成果,期望为药物剂型的开发研究提供理论支持。     

Thermosensitive polylactide‐glycolide delivery systems for treatment of narcotic addictions

Environmental switches may be fabricated for the controlled release of pharmaceutical drug using a thermally responsive polymer with the intrinsic chemical and physical nature of stimuli‐sensitive smart materials. Particularly, much attention has been paid to the biomedical applications of poly(N‐isopropyl acrylamide) (PNIPAAm) because of its unique reversible transition at a specific lower critical solution temperature (LCST).Thermally sensitive block copolymers, poly(N‐isopropyl acrylamide‐b‐poly(L ‐lactide‐co‐glycolide) (PNIPAAm‐b‐PLGA), and polyethylene glycol‐poly (lactide‐co‐glycolide) (PEG‐PLGA) triblock copolymers with different compositions and length of PLGA block were synthesized via ring‐opening polymerization of lactide and glycolide in the presence of OH‐terminated PNIPAAm or PEG. The composition and structure of the polymer were determined by NMR and FTIR. The effect of important factors, such as ionic strength, pH, and polymer concentration on the phase transition behavior of temperature‐sensitive polymers, were investigated by cloud point measurements. The resulting thermosensitive polymers were used for the entrapment of a narcotic antagonist drug, naltrexone, as the model drug. The loading efficiency and drug release behavior of naltrexone‐loaded hydrogels were investigated. The naltrexone loaded thermosensitive polymers were able to sustain the release of naltrexone for different periods of time, depending on the polymer composition, and concentration. In vitro release studies showed that these thermosensitive polymers are able to deliver naltrexone in biologically active forms at a controlled rate for 3–8 weeks. Copyright © 2009 John Wiley & Sons, Ltd.     

Controlled,radical reversible addition–fragmentation chain‐transfer polymerization in high‐surfactant‐concentration ionic miniemulsions

Living free‐radical polymerization of methacrylate and styrenic monomers with ionic surfactants was carried out with reversible addition–fragmentation chain transfer in miniemulsion with different surfactant types and concentrations. The previously reported problem of phase separation was found to be insignificant at higher surfactant concentrations, and control of the molar mass and polydispersity index was superior to that of published miniemulsion systems. Cationic and anionic surfactants were used to examine the validity of the argument that ionic surfactants interfere with transfer agents. Ionic surfactants were suitable for miniemulsion polymerization under certain conditions. The colloidal stability of the miniemulsions was consistent with the predictions of a specific model. The living character of the polymer that comprised the latex material was shown by its transformation into block copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 960–974, 2004     

Double‐Hydrophilic Block Copolymers: Synthesis and Application as Novel Surfactants and Crystal Growth Modifiers

Double‐hydrophilic block copolymers are a new class of amphiphilic molecules of rapidly increasing importance with unique and fascinating properties potentially connecting materials science, pharmacy, biochemistry and polymer science. Characteristic of these polymers is their application in aqueous environments and that amphiphilicity is just induced in the presence of a substrate or by temperature and pH changes, respectively. Their chemical structure may be tuned for a wide range of applications covering as different aspects as stabilization of colloids, crystal growth modification, induced micelle formation, polyelectrolyte complexing towards novel drug carrier systems. As the potential of this novel polymer class is relatively unexplored yet, it can be expected that more applications will arise due to the possibility to adapt the chemical structure to either the desired substrate in contact with water or the stimulus for the induction of structural changes. This review describes the synthetic strategies towards these AB block copolymers, as well as their applications.     

Thermally Regenerable Ion-Exchange Resins by Photografting

Crosslinked polymer beads containing regions of acidic and basic groups are the preferred structures for the efficient operation of a thermally regenerable ion-exchange process. Such systems can be prepared by various methods. Here the approach of using polymers and copolymers containing photo-labile groups as grafting sites is described. The polymers studied were polytriallylamine hydrochloride (polyTAA) and copolymers of propyldiallylamine hydrochloride (PDAA) and allyl benzoin methyl ether (ABME), of ABME and acrylic acid (AA), and of ABME and methyl acrylate (MA). The maximum amount of photografting of MA onto polyTAA was 12%. Very little photografting of MA onto PDAA:ABME copolymers was obtained. Photografting of TAA to AA:ABME and to MA:ABME copolymers occurred readily by using radiation of 360 nm wavelength, with the best yields of photografted polymer being about 60% when a MA:ABME copolymer was irradiated in a suspension. The effect of suspending medium, stirring rate, irradiation time, irradiation intensity, solvent, solids concentration, percentage of ABME in the MA:ABME copolymer, additional crosslinkers, surfactants, and the acid:base ratio in the hy-drolyzed resin prepared by photografting TAA onto MA:ABME copolymers on the yield, physical strength, shape, and ion-exchange properties of the resins is reported.     

Organizing thermodynamic data obtained from multicomponent polymer electrolytes: Salt‐containing polymer blends and block copolymers

The objective of this review is to organize literature data on the thermodynamic properties of salt‐containing polystyrene/poly(ethylene oxide) (PS/PEO) blends and polystyrene‐b‐poly(ethylene oxide) (SEO) diblock copolymers. These systems are of interest due to their potential to serve as electrolytes in all‐solid rechargeable lithium batteries. Mean‐field theories, developed for pure polymer blends and block copolymers, are used to describe phenomenon seen in salt‐containing systems. An effective Flory–Huggins interaction parameter, χ_eff , that increases linearly with salt concentration is used to describe the effect of salt addition for both blends and block copolymers. Segregation strength, χ_effN , where N is the chain length of the homopolymers or block copolymers, is used to map phase behavior of salty systems as a function of composition. Domain spacing of salt‐containing block copolymers is normalized to account for the effect of copolymer composition using an expression obtained in the weak segregation limit. The phase behavior of salty blends, salty block copolymers, and domain spacings of the latter systems, are presented as a function of chain length, composition and salt concentration on universal plots. While the proposed framework has limitations, the universal plots should serve as a starting point for organizing data from other salt‐containing polymer mixtures. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1177–1187     

Order within order: Studies of semifluorinated block copolymers

Several new semifluorinated compounds and polymers modified with these groups were synthesized and investigated. The polymer supports for these mesomorphic groups were styrene-diene block copolymers in which the semifluorinated groups were attached to a hydroxy-modified diene block. The characteristics of the smectic phase formed and its effect on the self-ordering behavior of the block copolymers were examined.     

Morphology control in polymeric multiphase systems with block copolymers and structured latexes

Some application possibilities of block copolymers for the morphology control in polymeric multiphase systems are reviewed. The microdomain formation of block copolymers in the solid state is illustrated in the case of functionalized block copolymers and for interpolymer complexes. The preparation of “hairy latex” by emulsion polymerization in the presence of hydrophilic-hydrophobic block copolymers is shown in connection with their applications in the controlled agglomeration process of latexes and for the preparation of polymer particles having microvoids. The surface activity of block copolymers in polymeric oil-in-oil systems is illustrated for silicone oil filled polymers. These materials have a low kinetic friction coefficient and act as reservoir systems with the lubricant incorporated in the polymer matrix.     

Experimental research and DPD simulation on the interaction between an ethoxy-modified trisiloxane and F127

The interactions between surfactants and polymers are widely investigated due to favorable changes on properties in their mixtures. Silicone surfactants and pluronic copolymers, both having low toxicity, are used in the detergent, cosmetics, medical, and pharmaceutical fields. Their mixture may gain better performance in their further applications. Therefore, we investigated the interaction between an ethoxy-modified trisiloxane (a silicone surfactant named Ag-64) and a block polyether F127 in this paper. From aggregation behavior of Ag-64 and F127, the formation mechanism and conformation of the aggregates were proposed based on experiments and dissipative particle dynamics (DPD) simulation. The surface activity and aggregation behavior of Ag-64 are affected by F127 in aqueous solutions. As the amounts of added Ag-64 increase, two types of aggregates (Ag-64/F127 aggregate with F127 as skeleton and the “pearl- necklace” aggregate in which Ag-64 micelles are strung along F127 chain) form successively. At higher polymer concentration, F127 twists together to form a coil/cluster aggregate with Ag-64. The results of DPD simulation approve that two main factors, the hydrophobic association and twist of F127 coil, contribute to the formation of different aggregates of Ag-64 and F127.     

PEG-PLA block copolymer as potential drug carrier: preparation and characterization

Diblock and multiblock copolymers composed of a poly(D,L-lactide) (PLA) or poly(trimethylene carbonate) (PTMC) core with a hydrophilic chain of poly(ethylene glycol) (PEG) were prepared. These copolymers, in which the core is connected to PEG through a polyfunctional molecule such as citric, mucic, or tartaric acid, may be used to form nanoparticles for drug delivery applications. Branched copolymers were prepared by direct amidation between the polyfunctional acid and methoxy PEGamine, followed by ring-opening polymerization of lactide or trimethyl carbonate to form the PLA and PTMC block copolymers. In addition, a complex multiblock copolymer of biotin-PEG-poly[lactic-co-(glycolic acid)] (PLGA) for application in an avidin-biotin system was prepared for possible design of nanospheres with targeting properties. Studies of drug release from polymeric systems containing multiblock copolymers and studies of polymer degradation were also performed.     

Synthesis,dynamic light scattering,and luminescence properties of copolymers containing iridium(III) bisterpyridine in the side chain

Supramolecular block‐random copolymers containing [Ir(terpy)₂]³⁺ in the side chain were synthesized via postfunctionalization of a P(S‐b‐AC_terpy) block copolymer. Absorbance and emission spectra compared to a model compound show that the polymer backbone has a minor effect on the polymer absorbance but produces a larger shift for the phosphorescence signals to higher wavelength. Dynamic light scattering of the metal complex containing copolymer studied in various solvents showed monomodal aggregation with decreasing aggregate size as the solvent dielectric constant increased. The copolymer precursor P(S‐b‐AC_terpy) shows multimodal aggregation in different solvents with the major population consisting of single chains. This difference in behavior between the two polymers is attributed to the electrolytic nature of the complex and the amphiphilicity induced by the charged metal complex. Supramolecular copolymers like these will continue to have interesting self‐organizational properties and may find applications in multicomponent systems for photoinduced charge separation processes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1109–1121, 2007     

Copolymerization of Metal Nanoparticles: A Route to Colloidal Plasmonic Copolymers

The resemblance between colloidal and molecular polymerization reactions is very useful in fundamental studies of polymerization reactions, as well as in the development of new nanoscale systems with desired properties. Future applications of colloidal polymers will require nanoparticle ensembles with a high degree of complexity that can be realized by hetero‐assembly of NPs with different dimensions, shapes, and compositions. A method has been developed to apply strategies from molecular copolymerization to the co‐assembly of gold nanorods with different dimensions into random and block copolymer structures (plasmonic copolymers). The approach was extended to the co‐assembly of random copolymers of gold and palladium nanorods. A kinetic model validated and further expanded the kinetic theories developed for molecular copolymerization reactions.