Enrichment of tocopherols in wheat germ by directly coupled supercritical fluid extraction with semipreparative supercritical fluid chromatography

Enrichment of tocopherol by coupled supercritical fluid extraction/preparative supercritical fluid chromatography is described. Wheat germ powder is used as the starting material and is subjected to supercritical fluid extraction with carbon dioxide. The extracted oil containing tocopherols is concentrated and trapped on a silica gel column by reducing the pressure of carbon dioxide. The trapped oil is then eluted and separated on a silica gel column of 20 mm i.d. x 20 mm length. The column effluent is fractionated by monitoring UV absorption at 290 nm. With this method, tocopherol content of the wheat germ is enriched 100-fold.     

Analysis of sulphonamides using supercritical fluid chromatography and supercritical fluid chromatography-mass spectrometry

Packed-column supercritical fluid chromatography has been used for the separation of mixtures of sulphonamides on silica and amino-bonded stationary phases utilizing carbon dioxide with methanol modifier as the mobile phase. The effect of modifier concentration, column pressure and modifier identity on retention was also studied. Packed-column supercritical fluid chromatography-mass spectrometry (SFC-MS) of these mixtures utilizing both moving-belt and modified thermospray interfaces was also studied. The identification of sulphamethazine in a spiked porcine kidney extract was performed by SFC-MS using the moving-belt interface.     

Determination of arsenic species in solid matrices utilizing supercritical fluid extraction coupled with gas chromatography after derivatization with thioglycolic acid n‐butyl ester

A method using derivatization and supercritical fluid extraction coupled with gas chromatography was developed for the analysis of dimethylarsinate, monomethylarsonate and inorganic arsenic simultaneously in solid matrices. Thioglycolic acid n‐butyl ester was used as a novel derivatizing reagent. A systematic discussion was made to investigate the effects of pressure, temperature, flow rate of the supercritical CO₂, extraction time, concentration of the modifier, and microemulsion on extraction efficiency. The application for real environmental samples was also studied. Results showed that thioglycolic acid n‐butyl ester was an effective derivatizing reagent that could be applied for arsenic speciation. Using methanol as modifier of the supercritical CO₂ can raise the extraction efficiency, which can be further enhanced by adding a microemulsion that contains Triton X‐405. The optimum extraction conditions were: 25 MPa, 90°C, static extraction for 10 min, dynamic extraction for 25 min with a flow rate of 2.0 mL/min of supercritical CO₂ modified by 5% v/v methanol and microemulsion. The detection limits of dimethylarsinate, monomethylarsonate, and inorganic arsenic in solid matrices were 0.12, 0.26, and 1.1 mg/kg, respectively. The optimized method was sensitive, convenient, and reliable for the extraction and analysis of different arsenic species in solid samples.     

Supercritical Carbon Dioxide Extraction of Salidroside from Rhodiola rosea L var. rosea Root

Salidroside from the root of Rhodiola rosea L var. rosea was extracted by supercritical carbon dioxide with and without methanol as modifier. Three parameters, i.e. temperature, pressure and different concentrations of methanol were optimized. Salidroside determinations were carried out using high‐performance liquid chromatography (HPLC) with UV‐Vis detector. An experimental design of response surface methodology (RSM) was used to map the effect of pressure (at 200, 300 and 400 bar), temperature (at 50, 60 and 70 °C) and percentage of methanol modifier (at 80, 90 and 100%) on the extraction yield of the active compound and to determine the optimal conditions for the extraction of salidroside from the root of plant. The results showed that supercritical carbon dioxide failed to extract salidroside from the plant material without a methanol as modifier. The yield obtained after 1.5 h extraction with the rate of modifier 0.4 mL/min and 300 bar, 70 °C, and 80 percent of methanol modifier condition was the highest (17.15 mg/g). The optimum conditions were 70 °C, 295.49 bar and 80 percent of methanol as modifier with the yield of 16.17 mg/g. In addition, the yield obtained with supercritical fluid extraction (SFE) was compared with the Soxhlet extraction, whose yield was 8.64 mg/g.     

Extraction of paeonol from Jisheng Shenqi Wan using supercritical fluid extraction

Supercritical carbon dioxide with or without methanol and 95% ethanol modifiers was used to extract paeonol from the pills of Jisheng Shenqi Wan and high-performance liquid chromatography (HPLC) was used to analyze the extract. The effect of temperature and pressure on the yield of paeonol was tested. The results show that the recovery of paeonol was improved by adding a polar modifier, such as methanol and 95% ethanol in supercritical fluid. The yield obtained after 120 min extraction with 95% ethanol modified-supercritical carbon dioxide was the highest (1.51, w/w at 60 degrees C and 400 bar), while that obtained with supercritical carbon dioxide only at 40 degrees C was the lowest from 0.67 to 0.83 over a range of 200-600 bar.     

Use of various filters for generating modified supercritical fluid mobile phases

Summary Adding various components to supercritical carbon dioxide in supercritical fluid chromatography can extend or significantly alter the solvating properties. Polar samples which are difficult to analyze with pure supercritical CO₂ because of their high polarity can be separated by addidng polar modifiers. In this paper, a new mixing method using an HPLC filter for adding polar modifier to CO₂ is described. Although several filters were tried, only one could keep the amount of modifier in the mobile phase constant for a long time. The amount of water or methanol dissolved in supercritical CO₂ was measured by an amperometric microsensor made of a thin film of perfluorosulfonate ionomer (PFSI).     

Comparison of supercritical fluid and ultrasound-assisted extraction of carotenoids and chlorophyll a from Dunaliella salina

In the work described here the extraction processes of carotenoids and chlorophylls were analysed using two extraction techniques, namely ultrasound-assisted extraction and supercritical fluid extraction, and the results are compared. The solvents used for the ultrasound-assisted extraction were N,N′-dimethylformamide and methanol and for the supercritical fluid extraction, carbon dioxide. The raw material studied was Dunaliella salina, a microalgae characterized by the high levels of carotenoids present in its cellular structure. The results indicate that the supercritical fluid extraction process is comparable to the ultrasound-assisted extraction when methanol is used as solvent. In addition, the supercritical extraction process is more selective for the recovery of carotenoids than the conventional technique since it leads to higher values for the ratio carotenoids/chlorophylls. Finally, the effects of pressure and temperature on the extraction yields of the supercritical fluid extraction process were studied.     

Extraction and isolation of diphenylheptanes and flavonoids from Alpinia officinarum Hance using supercritical fluid extraction followed by supercritical fluid chromatography

In this paper, an off-line combination method of supercritical fluid extraction and supercritical fluid chromatography was developed for the selective extraction and isolation of diphenylheptanes and flavonoids from Alpinia officinarum Hance. The enrichment of target components was successfully achieved using supercritical fluid extraction with the following conditions (8% ethanol as co-solvent at 45°C and 30 MPa for 30 min). Taking full advantage of the complementarity of supercritical fluid chromatography stationary phases, a two-step preparative supercritical fluid chromatography strategy was constructed. The extract was firstly divided into seven fractions on a Diol column (250 × 20 mm internal diameter, 10 μm) within 8 min by gradient elution increasing from 5% to 20% modifier (methanol) at 55 ml/min and 15 MPa. Then the seven fractions were separated by using a 1-AA or a DEA column (250 × 19 mm internal diameter, 5 μm) at 50 ml/min and 13.5 MPa. This two-step strategy showed superior separation ability for structural analogs. As a result, seven compounds, including four diphenylheptanes and three flavonoids with high purity, were successfully obtained. The developed method is also helpful for the extraction and isolation of other structural analogs of traditional Chinese medicines.     

The use of nitrous oxide for supercritical fluid extraction of pharmaceutical compounds from animal feed

Supercritical fluid extraction (SFE) coupled “off-line” with HPLC analysis has been applied to pharmaceutical analysis: two different matrixes (rodent and dog feed) were spiked with compounds under investigation in pharmacological studies in order to study the supercritical extraction of such matrixes prior to further analysis and quantification of the compounds of interest. The fluid flow-rate in the SFE system was governed by the geometric characteristics (internal diameter and length) of the linear fused silica capillaries. The changes in fluid flow-rate, between experiments, for each new restrictor, required the introduction of the term Total Gaseous Fluid Volume (TGFV), which enabled a series of extraction results to be compared. The comparative behavior of nitrous oxide and carbon dioxide as supercritical extraction fluids was investigated. Results obtained using pure supercritical fluids with high solvating power (density 0.79 g ml^?1) and fluids modified with a polar liquid solvent (methanol and acetonitrile) are discussed.     

Application of packed column supercritical fluid chromatography to the simultaneous determination of seven anticonvulsant drugs

Studies of speed, resolution, and selectivity have shown that packed column supercritical fluid chromatography (PCSFC) is a viable technique for the isocratic, isothermal and isobaric separation of seven anticonvulsants, viz., phenobarbitone, phenytoin sodium, phethenylate sodium, nitrazepam, clonazepam, carbamazepine, and primidone, and their simultaneous estimation. The drugs were eluted from a JASCO, RP-C₁₈ (250×4.6 mm) 10 μ packed column with a binary mobile phase of carbon dioxide and methanol, using ibuprofen as the internal standard. The effect of pressure, temperature, modifier concentration, and the rate of flow of CO₂ on retention and selectivity of all the analytes were studied and the parameters optimised. Without methanol in the mobile phase none of the solutes eluted. Changing modifier concentration was the most effective physical parameter for changing retention and selectivity. The analytes were detected using a UV detector at 215 nm. An arbitrary mixture of eight components was baseline resolved in 7 min. The study includes a successful attempt at quantification of the drugs. Chromatographic and analytical figures of merit have been listed. The present work holds promise for a possible replacement of HPLC with SFC for the separation and assay of drugs of different families.     

Supercritical fluid extraction of nylon 6: An investigation into the factors affecting the efficiency of extraction of caprolactam and its oligomers

Caprolactam and oligomers can be efficiently extracted from nylon 6 by use of supercritical fluid extraction with carbon dioxide containing 7.5 % (m/m) methanol as the extraction fluid. The application of a static extraction, using an additional amount of methanol, is necessary to obtain high extraction efficiencies.     

Large volume injection for preparative supercritical fluid chromatography

Summary A large volume injection system for preparative supercritical fluid chromatography is described. The method which is based on the solvent venting technique coupled with dilution of the sample solution consists of three steps. The first step is continuous dilution of the sample solution with liquid carbon dioxide at a controlled flow rate. The second step is solvent removal and solute trapping in a packed trap column. Combination of these two steps results in efficient solvent removal and the volume of sample which can be injected in a single injection becomes virtually unlimited. The third step is transfer and re-concentration of the solutes from the trap column on to the separation column with the pressures of both columns controlled independently; the final step is the separation. With this method, mass overloading behavior has been investigated and preparative separations performed.     

On-Line coupling of supercritical fluid extraction with high performance liquid chromatography

Supercritical fluid extraction was coupled directly with high performance liquid chromatograph. The system was evaluated for direct injection of supercritical CO₂ and modified supercritical CO₂ at high pressure and temperature onto a HPLC system with varying mobile phase compositions and flow rates. Injection of 9 μL supercritical CO₂ onto the HPLC using methanol/water mobile phases from 100% methanol to 80% with a flow of 1.0 mL/min did not adversely affect the baseline of UV detector. However at higher percentages of water, CO₂ solubility in the mobile phase decreased and caused baseline interferences on the UV detector. At higher HPLC mobile phase flow rates, supercritical CO₂ was injected to higher percentages of water without any effect on the UV baseline. Also, increasing the extraction pressure or modifier concentration did not change the results. Separations of polynuclear aromatic hydrocarbons and linear alkenebenzene sulfonate test mixtures were obtained using on-line SFE/HPLC interfaced system.     

Ternary eluent compositions in supercritical fluid chromatography improved fingerprinting of therapeutic peptides

Currently, little information has been published on the application of ternary eluent compositions in supercritical fluid chromatography for separating peptides. This work investigates the benefits of adding acetonitrile to methanol as the modifier. Three cyclic antibiotic peptides (bacitracin, colistin, and daptomycin) ranging between 1000 and 2000 Da were chosen as model substances. The ternary mixture of carbon dioxide, methanol, and acetonitrile is optimized to increase the resolution of the peptide's fingerprint. In addition, varying compositions of methanol and acetonitrile were found to change the elution order of the analytes, which is a valuable tool during method development. An individual gradient method using two Torus 2-PIC columns (each 100 × 3.0 mm, 1.7 μm), carbon dioxide, and a modifier consisting of acetonitrile/methanol/water/methanesulfonic acid (60:40:2:0.1, v:v:v:v) was optimized for each of the peptides. Subsequently, a generic method development protocol applicable to polypeptides is proposed.     

Detection of hydroperoxides in combustion aerosols by supercritical fluid extraction coupled to thin-layer chromatography

A simple method for separation of hydroperoxides from solid matrices using supercritical fluid extraction with on-line sample transfer to thin-layer chromatographic plates is presented. About 80% recovery is achieved for several thermally stable aromatic test compounds. For aliphatic hydroperoxides, up to 71% are found to be extracted with carbon dioxide and a solution of citric acid in methanol as a modifier. Application of the technique to the investigation of combustion aerosols is shown.     

Supercritical fluid extraction of sinomenine from Sinomenium acutum (Thumb) Rehd et Wils

Supercritical carbon dioxide, with and without a methanol modifier, was used to extract sinomenine from Sinomenium acutum (Thumb) Rehd et Wils. Sinomenine determinations were carried out using high-performance liquid chromatography (HPLC). The results show that the yield obtained after 2.5 h extraction with methanol-modified supercritical carbon dioxide was the highest (7.47 mg/g), while that obtained with only supercritical carbon dioxide was the lowest (0.17 mg/g). The recovery obtained with supercritical carbon dioxide, with and without a methanol modifier, could not be increased greatly by the method of the alkalinization of sample. Higher recoveries were obtained than extraction using methanol in Soxhlet extractor.     

Development of a supercritical fluid chromatography high-resolution separation method suitable for pharmaceuticals using cyanopropyl silica

A method has been developed for the analysis of a broad spectrum of pharmaceuticals using packed column supercritical fluid chromatography (pSFC) on a cyanopropyl silicagel stationary phase. Five 25 cm x 4.6 mm I.D., 5.0 microm columns were coupled to generate ca. 100000 plates. The selectivity was tuned by varying the nature and concentration of various modifiers and additives in the carbon dioxide mobile phase. It was noted that pressure influences both efficiency and selectivity of the chromatographic process. Final method conditions are: outlet pressure 100 bar, flow 2.0 mL/min, temperature 40 degrees C, organic modifier program from 5% (1 min) to 40% at 2.0%/min, organic modifier composition methanol:acetonitrile in a ratio of 3:1 (variable according to sample composition) with peak symmetry additives trifluoroacetic acid and diisopropylamine both at levels of 0.5%.     

Supercritical fluid extraction ofCymbopogon citratus (DC.) Stapf

Summary Cymbopogon citratus (DC.) Stapf. is also known as lemon grass; its leaves produce a volatile oil upon steam extraction which is used for medicinal purposes. This work describes the supercritical fluid extraction ofCymbopogon citratus in sequential and dynamic extraction modes. Different modifiers for supercritical carbon dioxide were used for the extractions. Principal compounds in the essential oils were analyzed by GC and GC-MS and identified as neral, geraniol, geranial, nerolic acid and geranic acid. Different chromatographic profiles were obtained when the type and proportion of modifier were changed.     

Synthetic ceramic clay material as stationary phase in packed column supercritical fluid chromatography

Summary A novel inorganic synthetic clay material (SC) has been evaluated as the stationary phase in packed-column, supercritical fluid chromatography (SFC). The molecular recognition capability of the SC stationary phase in SFC for polycyclic aromatic hydrocarbons has been evaluated using carbon dioxide and carbon dioxide modified with methanol as the mobile phase. This recognition derives from the layer structure of the SC material which acts as a slit to distinguish non-planar solutes from the molecular-molecular interaction between solute and stationary phase and leads to smaller retention for non-planar solutes. The recognition capability is also dependent on the SFC conditions such as column pressure and column temperature.     

Effects of pressure drop,particle size and thermal conditions on retention and efficiency in supercritical fluid chromatography

The effects of particle size and thermal insulation on retention and efficiency in packed-column supercritical fluid chromatography with large pressure drops are described for the separation of a series of model n-alkane solutes. The columns were 2.0 mm i.d. × 150 mm long and were packed with 3, 5, or 10-μm porous octylsilica particles. Separations were performed with pure carbon dioxide at 50 °C at average mobile phase densities of 0.47 g/mL (107 bar) and 0.70 g/mL (151 bar). The three principal causes of band broadening were the normal dispersion processes described by the van Deemter equation, changes in the retention factor due to the axial density gradient, and radial temperature gradients associated with expansion of the mobile phase. At the lower density the use of thermal insulation resulted in significant improvements in efficiency and decreased retention times at large pressure drops. The effects are attributed to the elimination of radial temperature gradients and the concurrent enhancement of the axial temperature gradient. Thermal insulation had no significant effect on chromatographic performance at the higher density. A simple expression to predict the onset of excess efficiency loss due to the radial temperature gradient is proposed.