Pressurized fluid extraction of carotenoids from Haematococcus pluvialis and Dunaliella salina and kavalactones from Piper methysticum

Pressurized fluid extraction (PFE) was examined as an alternative technology for the extraction of carotenoids in the green algae Haematococcus pluvialis and Dunaliella salina and kavalactones in Piper methysticum. The extraction process was optimized by varying the key extraction factors of solvent, sample-solvent ratio, temperature, and time. The selectivity and efficiency of extraction parameters were determined with high performance liquid chromatography (LC) and LC-mass spectrometry (LC-MS). Results showed that PFE utilization of conventional solvents under controlled temperature and pressure in an oxygen and light-free environment could result in the use of less solvent in a shorter period of time. PFE showed higher or equal extraction efficiencies as compared with traditional solvent extractions while maintaining the integrity of chemical components. PFE showed high potential for extraction of natural products and nutraceuticals, particularly labile and light sensitive chemicals.     

Quantification of the neurotransmitters melatonin and N-acetyl-serotonin in human serum by supercritical fluid chromatography coupled with tandem mass spectrometry

The aim of this study was developing a supercritical fluid chromatography tandem mass spectrometry (SFC-MS/MS) method and an ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) method, for the analysis of N-acetyl-serotonin (NAS) and melatonin (Mel) in human serum, and to compare the performance of these methods. Deuterated isotopologues of the neurotransmitters were synthesized and evaluated for suitability as internal standards in sample preparation. Liquid-liquid extraction was selected as sample preparation procedure. With chloroform, the best extraction solvent tested, an extraction yield of 48 ± 2% for N-acetyl-serotonin and 101 ± 10% for melatonin was achieved. SFC separation was accomplished within 3 min on a BEH stationary phase, employing isocratic elution with 90% carbon dioxide and 0.1% formic acid as well as 0.05% ammonium formate in methanol. For the 4 min UHPLC gradient separation with 0.1% formic acid in water and methanol, respectively, a Kinetex XB-C18 was used as stationary phase. Both chromatographic techniques were optimized regarding mobile phase composition, additives to the mobile phase and column temperature. Multiple reaction monitoring (MRM) analysis was used for quantification of the metabolites. Both methods were validated regarding retention time stability, LOD, LOQ, repeatability and reproducibility of quantification, process efficiency, extraction recovery and matrix effects. LOD and LOQ were 0.017 and 0.05 pg μL⁻¹ for NAS and 0.006 and 0.018 pg μL⁻¹ for Mel in SFC-MS/MS compared to 0.028 and 0.1 pg μL⁻¹ for NAS and 0.006 and 0.017 pg μL⁻¹ for Mel in UHPLC-MS/MS.     

Supercritical fluid extraction of 2,3,7,8-tetrachlorodibenzo-p-dioxin from sediment samples

Supercritical fluid extraction (SFE) is a promising technique for the extraction of 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD) from environmental matrices such as contaminated sediments. The ability of SFE to solubilize many organic contaminants is well documented in industrial processes but its analytical applications were exploited just recently. In this study supercritical carbon dioxide and nitrous oxide and their mixtures with 2% methanol were used to extract 2,3,7,8-TCDD from aquatic sediments. An attractive feature of this process is that the carbon dioxide, being a virtually inert fluid, leaves no solvent residue on the processed sediment. Almost 100% of the 2,3,7,8-TCDD can be extracted from a sediment spiked with 200 μg/kg 2,3,7,8-TCDD in 30 minutes by using supercritical carbon dioxide + 2% methanol. Cleanup procedure is compared with the Soxhlet extraction procedure currently used as a standard method for extracting dioxins from sediment samples.     

Pressurized liquid extraction versus other extraction techniques in micropreparative isolation of pharmacologically active isoflavones from Trifolium L. species

As a new sample preparation technique, pressurized liquid extraction (PLE), in combination with reversed-phase liquid chromatography (RP-LC) and photodiode-array (PDA) detection were used for the isolation and determination of phytoestrogenic isoflavones in hydrolyzed extracts obtained from aerial parts of five Trifolium L. (clover) species. To optimize the effectiveness of PLE procedure, variable extraction parameters: methanol and acetone (or their 75% aqueous solutions), as extraction solvents, temperatures (75, 100 and 125 °C) and the changeable number of static extraction cycles were tested. Additionally, two other micropreparative techniques: ultrasound-assisted extraction (UAE), and conventional solvent extraction (CSE), under optimized conditions, were also used and compared. Optimum extraction efficiency, expressed in the highest yield of biochanin A, formononetin, daidzein and genistein from plant material, with PLE, using methanol-water (75:25, v/v) as an extraction solvent, an oven temperature of 125 °C and three 5-min static extraction cycles, was obtained.     

Determination of additives in cosmetics by supercritical fluid extraction on-line headspace solid-phase microextraction combined with gas chromatography-mass spectrometry

A new hyphenated technique couples supercritical fluid extraction in situ derivatization and on-line headspace solid-phase microextraction to gas chromatography-mass spectrometry (SFE in situ derivatization on-line HS-SPME-GC-MS) for the determination of paraben preservatives and polyphenolic antioxidants in cosmetics. The preservatives and antioxidants were extracted from the cosmetic matrices with supercritical carbon dioxide at a pressure of 13,840 kPa. The supercritical fluid extraction was performed at 55 °C for 10 min of static extraction then 15 min of dynamic extraction. The extractant subsequently was derivatized in situ with the silylation reagent N,O-bis(trimethylsilyl)trifluoroacetamide with 0.1% trimethylchlorosilane. The product was then adsorbed on a polyacrylate solid-phase microextraction (SPME) fiber in the headspace. Sea sand was used as a dispersive material in the SFE step. The analytical linear ranges for the preservatives and antioxidants were found to be from 10 to 1000 ng g⁻¹ with RSD values below 7.8%. The detection limits ranged from 0.5 to 8.3 ng g⁻¹. These results are better than those obtained by using only SPME or SFE for trace preservatives and antioxidants analysis in cosmetic matrices. The new method was successfully utilized to determine the amounts of preservatives and antioxidants in real cosmetics without the need for tedious pretreatments.     

Determination of Microcystins in Cyanobacteria by Supercritical Fluid Extraction and Liquid Chromatography‐Tandem Mass Spectrometry

Abstract

A method for the detection of microcystins (microcystin LR, RR, and YR) in cyanobacteria by supercritical fluid extraction (SFE) and liquid chromatography‐mass spectrometry (LC/MS) has been developed. Supercritical fluids for the analytical extraction of nonvolatile, higher molecular weight compound, and microcystins from cyanobacteria were investigated. The microcystins included in this study are sparsely soluble in neat supercritical fluid CO₂. However, the microcystins was successfully extracted with a ternary mixture (90% CO₂, 9.5% methanol, 0.5% water) at 40°C and 250 atm. The polar carbon dioxide‐aqueous methanol fluid system gave high extraction efficiency for the extraction of the polar microcystins from cyanobacteria. The microcystins were determined by liquid chromatography‐tandem mass spectrometry (LC/MS/MS).     

Supercritical fluid extraction of polychlorinated dibenzo-p-dioxins from municipal incinerator fly ash

The supercritical fluid extraction of polychlorinated dibenzo-p-dioxins from an incinerator fly ash sample has been investigated; supercritical nitrous oxide and its mixtures with methanol and toluene were employed as mobile phases. Recoveries of individual polychlorinated dibenzo-p-dioxins congeners were calculated from results of analysis of ¹³C-labeled dioxins by high resolution GC-MS employing selected ion monitoring. The extraction procedure was compared with extraction in a Soxhlet apparatus, which is currently used as a standard method for removing chlorinated dibenzo-p-dioxins from fly ash samples: the results indicated that the time required for the extraction and clean-up can be reduced from 24 to 2.5 hours/sample. Quantitative recovery of the chlorinated dibenzo-p-dioxins was achieved at μg/kg levels, the relative standard deviation was between 1.8 and 5.8%. The use of a virtually inert fluid such as pure nitrous oxide provides significant improvement over conventional extraction procedures because no solvent residue is left in the processed extract.     

A spectrophotometric method for plant pigments determination and herbs classification

Twenty herbs, showing medicinal benefits on human life, like Taraxacum officinale, Plantago lanceolata, Hypericum perforatum, Ocimum basilicum, Melissa officinalis, Mentha piperita, and others, were tested. The percentage content of pigments, i.e. chlorophylls, carotenoids, and flavonoids, in the chosen herbs was determined. The spectrophotometric method, which is quick and readily available, was used. Measurements required pigment extraction with a solvent. Ethanol was used for the determination of chlorophylls and carotenoids, and acetone for the determination of flavonoids. Hierarchical agglomerative cluster analysis was performed in order to confirm the experimental results. The study of flavonoids content showed an interesting regularity which can be used for the classification of herbs. Plants belonging to the Lamiaceae family showed the flavonoids content in the range from 0.18 % to 0.68 %, whereas those belonging to the Apiaceaehas family showed the flavonoids content in the 0.75–1.20 % range.     

Supercritical Carbon Dioxide Extraction of Salidroside from Rhodiola rosea L var. rosea Root

Salidroside from the root of Rhodiola rosea L var. rosea was extracted by supercritical carbon dioxide with and without methanol as modifier. Three parameters, i.e. temperature, pressure and different concentrations of methanol were optimized. Salidroside determinations were carried out using high‐performance liquid chromatography (HPLC) with UV‐Vis detector. An experimental design of response surface methodology (RSM) was used to map the effect of pressure (at 200, 300 and 400 bar), temperature (at 50, 60 and 70 °C) and percentage of methanol modifier (at 80, 90 and 100%) on the extraction yield of the active compound and to determine the optimal conditions for the extraction of salidroside from the root of plant. The results showed that supercritical carbon dioxide failed to extract salidroside from the plant material without a methanol as modifier. The yield obtained after 1.5 h extraction with the rate of modifier 0.4 mL/min and 300 bar, 70 °C, and 80 percent of methanol modifier condition was the highest (17.15 mg/g). The optimum conditions were 70 °C, 295.49 bar and 80 percent of methanol as modifier with the yield of 16.17 mg/g. In addition, the yield obtained with supercritical fluid extraction (SFE) was compared with the Soxhlet extraction, whose yield was 8.64 mg/g.     

Comparison of supercritical fluid and Soxhlet extractions for the quantification of hydrocarbons from Euphorbia macroclada

This study compares conventional Soxhlet extraction and analytical scale supercritical fluid extraction (SFE) for their yields in extracting of hydrocarbons from arid-land plant Euphorbia macroclada. The plant material was firstly sequentially extracted with supercritical carbon dioxide, modified with 10% methanol (v/v) in the optimum conditions that is a pressure of 400 atm and a temperature of 50 °C and then it was sonicated in methylene chloride for an additional 4 h. E. macroclada was secondly extracted by using a Soxhlet apparatus at 30 °C for 8 h in methylene chloride. The validated SFE was then compared to the extraction yield of E. macroclada with a Soxhlet extraction by using the Student’s t-test at the 95% confidence level. All of extracts were fractionated with silica-gel in a glass column to get better hydrocarbon yields. Thus, the highest hydrocarbons yield from E. macroclada was achieved with SFE (5.8%) when it compared with Soxhlet extractions (1.1%). Gas chromatography (GC) analysis was performed to determine the quantitative hydrocarbons from plant material. The greatest quantitative hydrocarbon recovery from GC was obtained by supercritical carbon dioxide extract (0.6 mg g⁻¹).     

Conventional and ultrasound-assisted methods for extraction of bioactive compounds from red araçá peel (Psidium cattleianum Sabine)

The present study aimed to maximize the conventional extraction and compare it with the ultrasound-assisted method for extracting bioactive compounds obtained from the red araçá peel. The behavior of anthocyanins related to the pre-treatment of the vegetal matrix, employed solvent, extraction kinetics of both methods, the levels of total phenolic compounds, flavonoids and carotenoids, as well as the antioxidant activity were evaluated. The ultrasound-assisted extraction (40 KHz −154 W and 90 min) had an increase of 12% in the levels of anthocyanins (121.85 Eq. mg of cyanidin-3-glycoside/100 g of peel) and a 25% reduction in time extraction compared to conventional extraction by maceration (116.81 Eq. mg of cyanidin-3-glycoside/100 g of peel) using 90% ethanol, for 2 h, pH 1.5, at 40 °C and mass/volume ratio 1 g/10 mL). Analyses of the total phenolic compounds, flavonoids and carotenoids presented promising results for the ultrasound-assisted and conventional extractions, respectively. Analyzes of total phenolic compounds, flavonoids and carotenoids, show promising results for ultrasound-assisted extractions, respectively, indicating that red araçá is rich in bioactive compounds beneficial to human health, in addition to being considered natural pigments that can be used in food.     

Direct online extraction and determination by supercritical fluid extraction with chromatography and mass spectrometry of targeted carotenoids from red Habanero peppers (Capsicum chinense Jacq.)

Recently, supercritical fluid chromatography coupled to mass spectrometry has gained attention as a fast and useful technology applied to the carotenoids analysis. However, no reports are available in the literature on the direct online extraction and determination by supercritical fluid extraction with chromatography and mass spectrometry. The aim of this research was the development of an online method coupling supercritical fluid extraction and supercritical fluid chromatography for a detailed targeted native carotenoids characterization in red habanero peppers. The online nature of the system, compared to offline approaches, improves run‐to‐run precision, enables the setting of batch‐type applications, and reduces the risks of sample contamination. The extraction has been optimized using different temperatures, starting from 40°C up to 80°C. Multiple extractions, until depletion, were performed on the same sample to evaluate the extraction yield. The range of the first extraction yield, carried out at 80°C, which was the best extraction temperature, was 37.4–65.4%, with a %CV range of 2–12. Twenty‐one targeted analytes were extracted and identified by the developed methodology in less than 17 min, including free, monoesters, and diesters carotenoids, in a very fast and efficient way. Quantification of the β‐carotene was carried out by using the optimized conditions.     

Extraction of carotenoids and chlorophyll from microalgae with supercritical carbon dioxide and ethanol as cosolvent

The extraction of carotenoids and chlorophylls using carbon dioxide modified with ethanol as a cosolvent is an alternative to solvent extraction because it provides a high-speed extraction process. In the study described here, carotenoid and chlorophyll extraction with supercritical CO(2 )+ ethanol was explored using freeze-dried powders of three microalgae (Nannochloropsis gaditana, Synechococcus sp. and Dunaliella salina) as the raw materials. The operation conditions were as follows: pressures of 200, 300, 400 and 500 bar, temperatures of 40, 50 and 60 degrees C. Analysis of the extracts was performed by measuring the absorbance and by using empirical correlations. The results demonstrate that it is necessary to work at a temperature of 50-60 degrees C and a pressure range of 300-500 bar, depending on the type of microalgae, in order to obtain the highest yield of pigments. The best carotenoid/chlorophyll ratios were obtained by using supercritical fluid extraction + cosolvent instead of using conventional extraction. The higher selectivity of the former process should facilitate the separation and purification of the two extracted pigments.     

Rapid and quantitative extraction method for the determination of chlorophylls and carotenoids in olive oil by high-performance liquid chromatography

Colour is an organoleptic characteristic of virgin olive oil and an important attribute that affects the consumer perception of quality. Chlorophylls and carotenoids are the main pigments responsible for the colour of virgin olive oil. A simple analytical method for the quantitative determination of chlorophylls and carotenoids in virgin olive oils has been developed. The pigments were isolated from small samples of oil (1.0 g) by solid-phase extraction using diol-phase cartridges (diol-SPE), and the extract was analysed by reverse-phase HPLC with diode-array UV detection. Chromatographic peak resolution, reproducibility (coefficient of variation (C.V.) <4.5%) and recovery (>98.4%) for each component were satisfactory. A comparative study of the proposed method was performed versus classical liquid-liquid extraction (LLE) with N,N′-dimethylformamide and solid-phase extraction using a C18 column (C18-SPE). While 96.4% of the pigments were recovered by LLE, only 51.3% were isolated by C18-SPE in comparison to diol-SPE. Likewise, a higher alteration of pigment composition was observed when such LLE and C18-SPE procedures were used. In this sense, a higher ratio of pheophytin in comparison to that isolated by the diol-SPE procedure was achieved with both extraction procedures, indicating a greater extent of the pheophytinization reaction. Therefore, quantification of pigments from virgin olive oil by diol-SPE followed by RP-HPLC was found to be rapid, simple, required only a small amount of sample, consumed only small amounts of organic solvents, and provided high recoveries, accuracy and precision.     

Optimization of extraction of evodiamine and rutaecarpine from fruit of Evodia rutaecarpa using modified supercritical CO(2)

Evodiamine and rutaecarpine have been intensively studied due to their pharmacological actions and clinical applications. In this report, supercritical fluid was used to extract evodiamine and rutaecarpine from the unripe fruit of Evodia rutaecarpa. Response surface methodology using Box-Behnken experimental design was utilized to optimize parameters for supercritical carbon dioxide extraction with methanol as co-solvent. The effect of various values of dynamic extraction time (30-90min), temperature (50-70°C) and pressure (200-400bar) on extraction yields of the two compounds was evaluated. Determinations of the extracts were performed by high-performance liquid chromatography. The experimental data obtained were fitted to second-order polynomial equations and analyzed by analysis of variance. The highest yields predicted were 1.217mg/g for evodiamine and 0.969mg/g for rutaecarpine at the optimal values (time 78min, temperature 62°C, pressure 280bar and co-solvent flow rate 0.4mL/min), based on the selected range of experimental conditions.     

Exploration and optimization of conditions for quantitative analysis of lignans in Schisandra chinensis by an online supercritical fluid extraction with supercritical fluid chromatography system

An online supercritical fluid extraction with supercritical fluid chromatography system could provide sequential extraction and quantitative analysis of lignans in Schisandra chinensis. Supercritical fluid extraction conditions were optimized at 15 MPa, 50°C, and 4 min with supercritical CO₂ adding 1% methanol; the elution volume and flow rate were set at 6 mL and 2 mL/min to blow extract out of the tank completely. The split‐flow rate was confirmed at 2.5%, which determines injection volume and accuracy of quantitative detection. The factors having negative influences on supercritical fluid chromatography retention in the online system, including sample loading forms and backpressure settings, are discussed in the paper. At last, an extraction‐quantitative method for lignans in Schisandra chinensis was developed, which could be finished within 19.5 min. The total content percentage of four lignans (Schisandrin, Schisandrin A, Schisandrin B and Schisandrol B) in four batches was respectively measured to be 1.42, 1.54, 1.62, and 1.90%.     

Preparative isolation and purification of hainanmurpanin,meranzin, and phebalosin from leaves of Murraya exotica L. using supercritical fluid extraction combined with consecutive high‐speed countercurrent chromatography

The objective of this study was to develop a consecutive preparation method for the isolation and purification of hainanmurpanin, meranzin, and phebalosin from leaves of Murraya exotica L. The process involved supercritical fluid extraction with CO₂, solvent extraction, and two‐step high‐speed countercurrent chromatography. Pressure, temperature, and the volume of entrainer were optimized as 27 MPa, 52°C, and 60 mL by response surface methodology in supercritical fluid extraction with CO₂, and the yield of the crude extracts was 7.91 g from 100 g of leaves. Subsequently, 80% methanol/water was used to extract and condense the three compounds from the crude extracts, and 4.23 g of methanol/water extracts was obtained. Then, a two‐step high‐speed countercurrent chromatography procedure was developed for the isolation of the three target compounds from methanol/water extracts, including conventional high‐speed countercurrent chromatography for further enrichment and consecutive high‐speed countercurrent chromatography for purification. The yield of concentrates from high‐speed countercurrent chromatography was 2.50 g from 4.23 g of methanol/water extracts. Finally, the consecutive high‐speed countercurrent chromatography produced 103.2 mg of hainanmurpanin, 244.7 mg of meranzin, and 255.4 mg of phebalosin with purities up to 97.66, 99.36, and 98.64%, respectively, from 900 mg of high‐speed countercurrent chromatography concentrates in one run of three consecutive sample loadings without exchanging a solvent system.     

Supercritical fluid extraction of Beauvericin from maize

Beauvericin (BEA), a supercritical fluid extraction with supercritical carbon dioxide from maize was investigated. Extraction efficiencies under several different extraction conditions were examined. Pressure, temperature, extraction time, organic modifier and water matrix content (10%) were investigated. The best extraction conditions were at a temperature of 60 °C, 3200 psi, for 30 min static extraction time and methanol as modifier solvent. Extraction recovery of 36% without modifier by adding water to the matrix in the extraction vessel (reproducibility relative standard deviations (R.S.D.)=3-5%) were recorded. Extraction recovery of 76.9% with methanol as co-solvent (reproducibility R.S.D.=3-5%) was obtained. Data shows that SFE gives a lower BEA recovery compared to conventional extraction protocol with organic solvents while SFE with modifier and conventional extraction yields are comparable. BEA extract contents were determined by high pressure liquid chromatography (HPLC) with a diode array detector (DAD) at 205 nm and BEA peak confirmed by LC-MS. Acetonitrile-water as mobile phase and column C-18 were both tested. Instrumental and analytical parameters were optimized in the range linear interval from 1 to 500 mg kg⁻¹ and reached a detection limit of 2 ng.     

Assessment of Conventional Solvent Extraction vs. Supercritical Fluid Extraction of Khella (Ammi visnaga L.) Furanochromones and Their Cytotoxicity

Background: Khella (Ammi visnaga Lam.) fruits (Apiaceae) are rich in furanochromones, mainly khellin and visnagin, and are thus incorporated in several pharmaceutical products used mainly for treatment of renal stones. Methods: The objective of this study was to compare the yield of khellin and visnagin obtained using different conventional solvents and supercritical fluid extraction (SCFE) with carbon dioxide (containing 5% methanol as co-solvent). Water, acetone and ethanol (30% and 95%) were selected as conventional solvents. Results: Highest extract yield was obtained from 30% ethanol (15.44%), while SCFE gave the lowest yield (4.50%). However, the percentage of furanochromones were highest in SCFE (30.1%), and lowest in boiling water extract (5.95%). HPLC analysis of conventional solvent extracts showed other coumarins that did not appear in supercritical fluid extraction chromatogram due to non-selectivity of solvent extraction. Ammi visnaga extracts as well as standard khellin and visnagin were tested for their cytotoxic activity using sulforhodamine B assay on breast cancer (MCF-7) and hepatocellular carcinoma (Hep G2) cell lines. Results revealed a strong cytotoxic activity (IC₅₀ < 20 µg/mL) for the SCFE and standard compounds (khellin and visnagin) (IC₅₀ ranging between 12.54 ± 0.57 and 17.53 ± 1.03 µg/mL). However, ethanol and acetone extracts had moderate cytotoxic activity (IC₅₀ 20–90 µg/mL) and aqueous extract had a weak activity (IC₅₀ > 90 µg/mL). Conclusions: Thus, supercritical fluid extraction is an efficient, relatively safe, and cheap technique that yielded a more selective purified extract with better cytotoxic activity.