Explorations of alkyl polyols as "class I" organic modifiers to adjust selectivity in micellar electrokinetic capillary chromatography.

In this study, we investigated a novel series of micelle modifiers useful to alter selectivity in micellar electrokinetic capillary chromatography (MEKC). These modifiers were alkyl polyalcohols, including 1-octanol, 1,2-octanediol, 1,2,3-octanetriol, 1,2-hexanediol, and 1,2-butanediol, which act as class I organic modifiers in that their effects are on the sodium dodecyl sulfate (SDS) micelle rather than the surrounding aqueous phase. This characteristic allows the alkyl polyols to effect resolution when applied at concentrations as low as 20 mM (0.25% v/v) by altering the selectivity observed with SDS without a modifier. The effects of the alkyl polyols on the critical micelle concentration of SDS, electroosmotic flow, and electrophoretic mobility of the SDS micelle are presented. These modifiers had little impact on the migration time window at the concentrations explored. Changes in selectivity induced by the alkyl polyols for a large set of model compounds are presented. Trends indicate that solutes capable of forming hydrogen bonds tend to decrease their interactions with the micellar phase while nonhydrogen bonding solutes increase their interactions upon addition of the modifiers. The solvation parameter model was used to characterize the induced changes in selectivity. This model suggests that even though the modifiers are structurally similar, each produced a unique set of system constants. It was also demonstrated that the addition of alkyl polyols improved the correlation between the partition coefficients of SDS and water to 1-octanol and water. The usefulness of the alkyl polyols was demonstrated by examining their effects on the separation of 11 priority phenols.     

Highly efficient separation of isomeric epoxy fatty acids by micellar electrokinetic chromatography

A capillary electrophoresis (CE) method has been developed for simple and direct separation of cis- and trans-12,13-epoxy-9(Z)-octadecenoic acid and 9,10-epoxy-12(Z)-octadecenoic acid isomers. Separation was performed in micellar electrokinetic capillary chromatography (MEKC) using a buffer consisting of 25 mM borate (pH 9.20), 10 mM sodium dodecyl sulfate (SDS) and 10% v/v acetonitrile. The key variables, concentrations of SDS and organic modifier, were optimized by the application of a factorial experimental design. The use of a low micellar concentration, just above critical micelle concentration (CMC), in a background electrolyte containing an organic modifier not only made it possible to dissolve and separate highly hydrophobic fatty acid isomers, but also resulted in improved separation efficiency and selectivity. Separation efficiency up to 4 x 10(5) theoretical plates/m was achieved under an optimized condition. Also investigated were the influence of temperature on separation and the effect of organic modifier concentration on the dynamic exchange of the analytes between micelles and the bulk of the buffer solution. Direct UV was applied for detection of the fatty acids.     

Separation and selectivity in micellar electrokinetic chromatography using sodium dodecyl sulfate micelles or Tween 20-modified mixed micelles

The separation and selectivity of eight aromatic compounds ranging from hydrophilic to hydrophobic properties in micellar electrokinetic chromatography (MEKC) using sodium dodecyl sulfate (SDS) micelles or Tween 20-modified mixed micelles were investigated. The effect of different operation conditions such as SDS and Tween 20 modifier surfactant concentration, buffer pH, and applied voltage was studied. The resolution and selectivity of analytes could be markedly affected by changing the SDS micelle concentration or Tween 20 content in the mixed micelles. Applied voltage and pH of running buffers were used mainly to shorten the separation time. Complete separation of eight analytes could be achieved with an appropriate choice of the concentration of SDS micelles or Tween 20-modified mixed micelles. Quicker elution and better precision could be obtained with SDS-Tween 20 mixed micelles than with SDS micelles. The mechanisms that migration order of those analytes was mainly based on their structures and solute-micelle interactions, including hydrophobic, electrostatic, and hydrogen bonding interactions, were discussed.     

Modification of a micellar system for amino acid separation by MEKC--application for amino acid profiling in formulations for parenteral use

The paper proposes a new method for amino acid determination which can be applied for amino acid profiling in solutions for parenteral nutrition. The MEKC method based on a mixed micellar system was developed for the separation of 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate (AQC) derivatized amino acids. Background electrolyte was based on tris-borate buffer with high alkaline pH. Sodium dodecyl sulfate micelles were modified using 1,2-hexanediol as a co-surfactant. The effect of the modifier on amino acid migration was studied with respect to hydrophobicity of the analytes. The modifier appeared to be suitable to improve the separation of AQC-tagged amino acids without an adverse effect on buffer ionic strength or EOF velocity. The method was successfully validated and applied for amino acid profiling in medicinal preparations for parenteral nutrition. The results obtained were compared with a reference chromatographic method (amino acid analyser).     

胶束溶液体系对毛细管电动色谱酸性化合物分离的影响

以阴离子表面活性剂十二烷基硫酸钠（SDS）、非离子表面活性剂吐温20（ Tween 20）及两者组成的混合胶束体系作为毛细管胶束电动色谱（MECC）的分离介 质，进行4种结构相似的酸性化合物的MECC分离研究，考察了胶束的类型、表面活 性剂的浓度、缓冲溶液的pH值及有机改性剂乙醇对分离的影响。结果表明各因素对 酸性药物的MECC分离有不同的影响规律。SDS胶束体系对溶质的保留值最大， Tween 20体系的保留值最小，二者的分离选择性正好相反，混合胶束体系的分离行 为则介于两者之间；在SDS和Tween 20体系中，表面活性剂浓度增加，溶质的保留 时间均随之递增，混合胶束体系中，总浓度一定，随Tween 20配比的增加，溶质的 保留时间先减少后增加；缓冲溶液的pH值增大，使溶质的分离效果均能变差；有机 改性剂乙醇的加入对容量因子的影响主要与溶质的疏水性有关，并对分离作用机理 进行了探讨。在SDS和Tween 20 MECC体系下，分别进行了实样测定，取得了满意的 结果。     

Separation of B6 vitamers with micellar liquid chromatography using UV and electrochemical detection

Separation of six vitamers of vitamin B6 was performed by RP-HPLC using micellar mobile phase, UV and electrochemical detection. Effect of temperature, type and amount of organic modifier in mobile phase on efficiency and asymmetry factor showed that, the appropriate conditions were temperature of 35 degrees C and 3.0-5.0% (v/v) 1-butanol in mobile phase. Variations of selectivity factor versus 1-butanol concentration, pH of mobile phase, and SDS concentration was investigated and the following optimized conditions were selected for the separation: 3.0% (v/v) 1-butanol, pH=5.5 and 65 mM SDS in mobile phase. Electrochemical behavior of vitamers in optimized mobile phase was investigated using cyclic voltammetry, and potential of +1.2 V versus Ag/AgCl(Sat.) was chose as working potential. Finally, separation of B6 vitamers using UV detection at 254 nm and electrochemical detection at +1.2 V was compared.     

The interaction of isomeric hexanediols with sodium dodecyl sulfate and dodecyltrimethylammonium bromide micelles

The micelle formation process for a typical anionic surfactant, sodium dodecyl sulfate, and a typical cationic surfactant, dodecyltrimethylammonium bromide, has been investigated in a series of mixed solvents consisting of different concentrations of isomeric hexanediols (1,2-hexanediol and 1,6-hexanediol) in water. The critical micelle concentrations and the degrees of counterion dissociation of the mixed micelles were obtained from conductance experiments. Luminescence probing experiments have been used to determine the concentration of micelles in solution and, hence, the micellar aggregation numbers of the surfactants in the mixed solvent systems. The alcohol aggregation numbers were determined by combining the partition coefficients (obtained using NMR paramagnetic relaxation enhancement experiments) with the micellar concentrations from the luminescence probing experiments. All these results are interpreted in terms of the difference in the interaction of the isomeric hexanediols with the surfactant as a function of the position of the hydroxyl groups on the six-carbon chain of the alcohol. Received: 28 June 2000/Accepted: 5 July 2000     

Univalent salts as modifiers in micellar capillary electrophoresis

The influence of three univalent salts (LiCl, NaCl and RbCl) on the separation of amino acids labelled with 3-(4-carboxybenzoyl)-quinoline-2-carboxaldehyde (CBQCA) in micellar capillary electrophoresis has been studied. Capacity factors for a series of eight CBQCA-labelled amino acids in a sodium dodecyl sulfate (SDS) micellar system containing different concentrations of salt were measured and were found to be related to both the hydrodynamic radius of the salt counter-ion (Li(+), Na(+), Rb(+)) and the relative hydrophobicity of the amino acid. Affinities of the analytes for the micelles were generally observed to decrease as the salt concentration in the background electrolyte was increased from 10 to 50 mM. This decrease in affinity was greatest in the presence of the salt counter-ion with the smallest hydrodynamic radius and is primarily due to an increased resistance to mass transfer. Furthermore, interaction of hydrophobic analytes with the micelles is greater than that of hydrophilic analytes at all salt concentrations due to the greater strength of the hydrophobic interactions and this effect is also enhanced in the presence of a smaller counter-ion. No negative effects due to Joule heating or electromigrative dispersion were observed for low to moderate concentrations of salt, which suggests that the use of simple univalent salts to modify analyte/micelle affinities can be a practical method for improving the separation of complex mixtures.     

Micellar and aqueous‐organic liquid chromatography using sub‐2 μm packings for fast separation of natural phenolic compounds

The objective of the present work was to investigate the chromatographic behavior of natural phenolic compounds in micellar and aqueous‐organic LC using a short column packed with 1.8 μm particles. Firstly, the effect of ACN and SDS on elution strength and selectivity was examined by isocratic submicellar (0–30% ACN/5% 1‐butanol/1–6 mM SDS) and micellar (0–30% ACN/5% 1‐butanol/40–60 mM SDS) systems. The varied concentrations of two modifiers in the mobile phases revealed different eluting power. Then, the application of organic modifier gradient was discussed in both submicellar and micellar LC using mobile phases of 4 mM SDS/5% 1‐butanol or 50 mM SDS/5% 1‐butanol containing ACN gradient from 0 to 30%, respectively. For micellar system, the separation was found to be better in gradient than isocratic elution. Additionally, the sensitivity of aqueous‐organic LC was examined. The mobile phase was a mixture of ACN and water employing gradient elution at a flow rate of 0.5 mL/min, with analysis time below 9 min. It was found that separation efficiency was significantly better compared with micellar LC. Besides, the aqueous‐organic LC has been applied to separation of various phenolic compounds in Yangwei granule or Radix Astragali samples.     

Optimization of separation and migration behavior of chloropyridines in micellar electrokinetic chromatography

The separation and migration behavior of pyridine and eight chloropyridines, including three monochloropyridines, four dichloropyridines, and 2,3,5-trichloropyridine were investigated by micellar electrokinetic chromatography using either sodium dodecyl sulfate (SDS) as an anionic surfactant or SDS-Brij 35 mixed micelles. Various parameters such as buffer pH, SDS concentration, Brij 35 concentration and methanol content that affect the separation were optimized. Complete separation of these chloropyridines was optimally achieved with a phosphate buffer containing SDS (30 mM) and methanol (10%, v/v) at pH 7.0. The resolution and selectivity of analytes could be considerably affected by the addition of methanol and/or Brij 35 to the background electrolyte. The migration order of these chloropyridines depends primarily on their hydrophobicity. However, electrostatic interactions may also play a significant role in the determination of the migration order of the positional isomers of chloropyridines.     

Chiral separation of amino acid esters by micellar electrokinetic chromatography

Micellar electrokinetic chromatography (MEKC) was used for the chiral separation of uncharged analytes (C- and N-protected amino acids). Sodium dodecyl sulfate (SDS) was the micelle forming agent, and different cyclodextrin (CD) derivatives were added as chiral selectors. Suitable conditions for the enantioseparation were found by variation of the separation conditions. The influence of addition of organic solvents like acetonitrile or methanol, and other chiral additives (camphor-10-sulfonic acid, malic acid) was examined. The addition of an organic modifier resulted in different effects on micelle formation, and thereby on the separation. The used chiral additives did not improve the selectivity. Furthermore, dependence of the electroosmotic flow (EOF), and the capacity factors on the concentration of CDs was investigated. Increasing the CD concentration, both the EOF to a smaller extent as well as the capacity factors decrease. Nevertheless, the enantioseparation is improved with a CD-concentration up to 30 mM. Higher CD-concentrations reduce the separation of the analytes.     

Effects of organic modifiers on solute retention and electrokinetic migrations in micellar electrokinetic capillary chromatography.

Influences of seven organic modifiers, including urea, methanol (MeOH), dioxane (DIO), tetrahydrofuran (THF), acetonitrile (ACN), 1-propanol (1-PrOH) and 2-propanol (2-PrOH), on the solute retention and the electrokinetic migrations in micellar electrokinetic capillary chromatography (MEKC) are investigated with sodium dodecyl sulfate (SDS) micelle as pseudostationary phase. It is observed that in the limited concentration ranges used in the MEKC systems the effect of organic modifier concentration on the retention can be described by the equation logk1=logk1w-SC for most binary aqueous-organic buffer, but deviations from this retention equation are observed at ACN and particularly THF as organic modifiers. With parameter S as a measure of the elutropic strength, the elutropic strength of the organic modifiers is found to follow a general order urea 相似文献   

Towards a general approach for the impurity profiling of drugs by micellar electrokinetic chromatography

A general micellar electrokinetic chromatographic (MEKC) strategy for the impurity profiling of drugs was developed involving a sodium dodecyl sulfate (SDS) and a cetyltrimethylammonium bromide (CTAB) MEKC system. With this combination, in principle, each sample component passes the detector in at least one of the two MEKC systems provided that separation buffers of the same pH are used in both systems. In order to select the proper MEKC systems, the electroosmotic flow (EOF) and micelle migration time (t(mc)) were determined for separation buffers of several pH values, containing various amounts of surfactant and organic modifier. The selectivity of the MEKC systems was studied using a mixture of compounds with a wide range of physico-chemical properties. The final selection of two adequate MEKC systems for this approach was based on the requirements that the t(mc) (i.e., analysis time) of both systems was below 20 min and that the t(mc)/t(eof) ratio was above 3 or 2 for the SDS and CTAB system, respectively. Furthermore, the systems should provide high efficiency, exhibit differences in selectivity and use moderate concentrations of modifier and surfactant, so that, if needed, further optimization is possible. The selected MEKC systems contained 60 mM SDS or 10 mM CTAB, respectively, in a phosphate buffer (pH 7.5) with 10% acetonitrile. Some test compounds with extreme mobilities were used to demonstrate the suitability of the MEKC approach to detect each component of a sample. The potential of the proposed MEKC combination for impurity profiling was demonstrated by the analysis of fluvoxamine with several impurities at the 0.1% level.     

Separation of natural pyrethrum extracts using micellar electrokinetic chromatography

The separation of the six pyrethrin esters in a technical pyrethrum extract (Riedel-de-Ha?n, Cresent Chemical Co. Inc. Hauppauge, NY, USA) by micellar electrokinetic chromatography (MEKC) using both sodium dodecyl sulfate (SDS) and a polymerized surfactant as pseudo-stationary phases has been investigated and optimized. Parameters such as pH, SDS and polymerized sodium N-undecyl sulfate (poly-SUS) concentration, type and concentration of background electrolyte and organic modifier, as well as the acetonitrile/water ratio in the sample were studied to optimize the resolution, efficiency, and analysis time. An optimized separation of the six pyrethrin esters was achieved in 25 min with 25 mM Tris, buffered at pH 9, containing 30 mM SDS, 25% (v/v) acetonitrile, and an equal volume ratio of acetonitrile/water sample matrix at a voltage of 25 kV. The use of 0.5% (w/v) poly-SUS enhanced resolution of the pyrethrin esters and shortened the total analysis time from 25 to 20 min, compared to the SDS mediated separation. The optimized MEKC results are compared to the HPLC separation of these esters and show an improvement in efficiency and total analysis time.     

Aliphatic carboxylic acids and alcohols as efficiency and elution strength enhancers in micellar liquid chromatography

Micellar liquid chromatography (MLC) uses surfactant solutions as mobile phases with added organic additives to enhance both the elution strength and the chromatographic efficiency. Two aliphatic carboxylic acids (1-butanoic and 1-pentanoic) were used as MLC additives and compared with the two corresponding alcohols (1-butanol, 1-pentanol) in terms of elution strength, efficiency and selectivity. A set of 11 phenol derivatives was used as probe compounds. All micellar mobile phases were prepared with sodium dodecylsulfate (SDS) with concentration ranging from 0.05 to 0.15 M and the modifier content within 1.0 and 5.0% (v/v). The elution strength of different mobile phases containing a constant amount of SDS and different amounts of modifiers; and mobile phases containing a constant amount of modifier and different SDS concentration were determined and discussed. The effect of the acid modifiers on efficiency was studied constructing van Deemter plots that showed no minimum within the 0.01–0.7 mL/min flow rate range studied. Temperature effects were also studied constructing the classical van’t Hoff plots. The slight curvature of the plots in the 25–70 °C range may indicate some modification of the surfactant-bonded moiety layer on the stationary phase surface. Since no definitive advantage of the use of aliphatic acids were established compared to their alcohol counterpart, their terrible smell will probably preclude their use as MLC organic modifiers.     

Separation and determination of lignans from seeds of Schisandra species by micellar electrokinetic capillary chromatography using ionic liquid as modifier

In this paper, a micellar electrokinetic chromatographic (MEKC) method using ionic liquid as modifier for the quantification of the active components of lignans found in the medicinal herbs Schisandra species was developed for the first time. Preliminary investigations employing sodium dodecyl sulfate (SDS) as surfactant did not lead to the necessary resolution of the studied compounds, the addition of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM-BF4) to the SDS micellar system resulted in the complete separation of all the compounds. The effects on the separation by several parameters such as BMIM-BF4 and SDS concentration, applied voltage, background electrolyte pH and concentration, were evaluated. Under the optimal conditions (5 mM borate-5 mM phosphate buffer in the presence of 20 mM SDS and 10 mM BMIM-BF4, pH 9.2, applied voltage 25 kV and detection at 254 nm), the method successfully applied to the determination of lignans in extracts of Schisandra chinensis (Turcz.) Baill. and Schisandra henryi C.B. Clarke in less than 13 min. The separation mechanism was also discussed.     

Methodology for predicting the separation of proteins by hydrophobic interaction chromatography and its application to a cell extract

Ligand-exchange micellar electrokinetic capillary chromatography was used for the chiral resolution of underivatized and dansyl amino acid enantiomers simultaneously. The separation was achieved by chiral copper(II)-L-valine complexes incorporated in micelles of sodium dodecyl sulfate (SDS). The enantioresolution was strongly affected by SDS and a concentration of 20 mM SDS was shown to be necessary for the separation. Other impacting factors were investigated including pH, the molar ratio of copper(II) to L-valine and the total concentration of complex. Using the proposed method, 11 different dansyl amino acids and two underivatized amino acids were separated successfully with a running electrolyte of 20 mM NH4OAc, 4 mM CuSO4, 8 mM L-valine and 20 mM SDS at pH 9.0 in less than 25 min. Experiments were also performed with other amino acid ligands in order to vary the stability and the sterical arrangement of the copper(II) complexes and the possible chiral recognition mechanism was also discussed briefly.     

Micellar liquid chromatography retention model based on mass-action concept of micelle formation

Mass-action model of surfactant micelle formation has been used to develop a conceptual retention model in micellar liquid chromatography (MLC). The retention model bases on the consideration of the changes of the sorbate microenvironment at its transferring from the mobile phase (hybrid micellar eluent) to the stationary phase (a modified surface of alkyl-bounded sorbent). Principal retention equation contains the characteristics of hybrid micelles (critical micelle concentration, degree of counterion binding, partition coefficient of modifier between aqueous solution and micellar pseudo-phase) as well as three fitting parameters. The fitting parameters are an absolute term and coefficients that are equal to the number of molecules of surfactant and modifier, which are attached/detached by sorbate transferring from a hybrid micellar eluent to a modified surface of the stationary phase. On the MLC separation of five antibiotics of rubomicin derivatives and four esters of 4-hydroxybenzoic acid the model of the change of sorbate microenvironment has been tested. The adequateness of model to experimental data has been shown. A simple three-parameter function connecting log k with log cS and log cR that provides a high goodness-of-fit follows from principal retention equation (cS and cR are the molar concentrations of surfactant and organic modifier in the micellar eluent, respectively).     

Linear solvation energy relationships of anionic dimeric surfactants in micellar electrokinetic chromatography II. Effect of the length of a hydrophilic spacer

Anionic dimeric surfactants with hydrophilic spacers containing two to six oxygen atoms were synthesized and applied as pseudostationary phases in micellar electrokinetic chromatography. Their selectivity was determined via linear solvation energy relationships. There were no differences in cohesiveness, polarizability or dipolarity with increasing spacer length, but there was a clear trend in increasing hydrogen bond accepting ability, and a concomitant decrease in hydrogen bond donating ability. The different selectivity of these dimeric surfactants compared to sodium dodecylsulfate can be useful for optimizing separations of mixtures of solutes for which these types of interactions are important. Their critical micelle concentrations were in the range of 0.2-0.3mM, except for the surfactant with the shortest spacer (<0.03 mM), and are much lower than those of conventional surfactants used in micellar electrokinetic chromatography.