A piezoelectric screw dislocation interacting with a half-plane trimaterial composite

The electro-elastic stress investigation on the interaction between a screw dislocation and a half-plane trimaterial composite composed of three bonded dissimilar transversely isotropic piezoelectric materials is analyzed in the framework of linear piezoelectricity. Each layer is assumed to have the same material orientation with x ₃ in the poling direction. The dislocations are characterized by a discontinuous displacement and electric potential across the slip plane and are subjected to a line force and a line charge at the core. Based on the complex variable and the method of alternating technique, the solution of electric field and displacement field is expressed in terms of explicit series form. The solutions derived here can be applied to a variety of problems, for example, a half-plane bimaterial, a quarter-plane bimaterial, a quarter-plane material and a rectangular strip etc. Numerical results are provided to show the influences of the material combinations and geometric configurations on the electro-elastic fields and image force calculated through the generalized Peach-Koehler formula. The solutions proposed here can be served as Green??s functions for the analyses corresponding piezoelectric cracking problems.     

Piezoelectric screw dislocations interacting with a circular inclusion with imperfect interface

The electroelastic coupling interaction between multiple screw dislocations and a circular inclusion with an imperfect interface in a piezoelectric solid is investigated. The appointed screw dislocation may be located either outside or inside the inclusion and is subjected to a line charge and a line force at the core. The analytic solutions of electroelastic fields are obtained by means of the complex-variable method. With the aid of the generalized Peach–Koehler formula, the explicit expressions of image forces exerted on the piezoelectric screw dislocations are derived. The motion and the equilibrium position of the appointed screw dislocation near the circular interface are discussed for variable parameters (interface imperfection, material electroelastic mismatch, and dislocation position), and the influence of the nearby parallel screw dislocations is also considered. It is found that the piezoelectric screw dislocation is always attracted by the electromechanical imperfect interface. When the interface imperfection is strong, the impact of material electroelastic mismatch on the image force and the equilibrium position of the dislocation becomes weak. Additionally, the effect of the nearby dislocations on the mobility of the appointed dislocation is very important.     

Line-integral representations for extended displacements,stresses, and interaction energy of arbitrary dislocation loops in transversely isotropic magneto-electro-elastic bimaterials

In addition to the hexagonal crystals of class 6 mm, many piezoelectric materials （e.g., BaTiO3）, piezomagnetic materials （e.g., CoFe2O4）, and multiferroic com-posite materials （e.g., BaTiO3-CoFe2O4 composites） also exhibit symmetry of transverse isotropy after poling, with the isotropic plane perpendicular to the poling direction. In this paper, simple and elegant line-integral expressions are derived for extended displace-ments, extended stresses, self-energy, and interaction energy of arbitrarily shaped, three-dimensional （3D） dislocation loops with a constant extended Burgers vector in trans-versely isotropic magneto-electro-elastic （MEE） bimaterials （i.e., joined half-spaces）. The derived solutions can also be simply reduced to those expressions for piezoelectric, piezo-magnetic, or purely elastic materials. Several numerical examples are given to show both the multi-field coupling effect and the interface/surface effect in transversely isotropic MEE materials.     

Interaction between a screw dislocation and a viscoelastic piezoelectric bimaterial interface

The complex variable method is employed to derive analytical solutions for the interaction between a piezoelectric screw dislocation and a Kelvin-type viscoelastic piezoelectric bimaterial interface. Through analytical continuation, the original boundary value problem can be reduced to an inhomogeneous first-order partial differential equation for a single function of location z = x + iy and time t defined in the lower half-plane, which is free of the screw dislocation. Once the initial, steady-state and far-field conditions are known, the solution to the first order differential equation can be obtained. From the solved function, explicit expressions are then derived for the stresses, strains, electric fields and electric displacements induced by the piezoelectric screw dislocation. Also presented is the image force acting on the screw dislocation due to its interaction with the Kelvin-type viscoelastic interface. The derived solutions are verified by comparing with existing solutions for the simplified cases, and various interesting features are observed, particularly for those associated with the image force.     

Electro-elastic interaction between a piezoelectric screw dislocation and circular interfacial rigid lines

The electro-elastic interaction between a piezoelectric screw dislocation located either outside or inside inhomogeneity and circular interfacial rigid lines under anti-plane mechanical and in-plane electrical loads in linear piezoelectric materials is dealt with in the framework of linear elastic theory. Using Riemann–Schwarz’s symmetry principle integrated with the analysis of singularity of complex functions, the general solution of this problem is presented in this paper. For a special example, the closed form solutions for electro-elastic fields in matrix and inhomogeneity regions are derived explicitly when interface containing single rigid line. Applying perturbation technique, perturbation stress and electric displacement fields are obtained. The image force acting on piezoelectric screw dislocation is calculated by using the generalized Peach–Koehler formula. As a result, numerical analysis and discussion show that soft inhomogeneity can repel screw dislocation in piezoelectric material due to their intrinsic electro-mechanical coupling behavior and the influence of interfacial rigid line upon the image force is profound. When the radian of circular rigid line reaches extensive magnitude, the presence of interfacial rigid line can change the interaction mechanism.     

Analysis of a piezoelectric screw dislocation inside an elliptical inhomogeneity with confocal rigid line in piezoelectric material

This paper deals with the electro-elastic coupling interaction between a piezoelectric screw dislocation which is located inside the elliptical inhomogeneity and an electrically conductive confocal rigid line under remote anti-plane shear stresses and in-plane electrical loads in piezoelectric composite material. The analytical-functions of the complex potentials, stress fields and the image force acting on the piezoelectric screw dislocation are obtained based on the principle of conformal mapping, the method of series expansion, the technical of analytic continuation and the analysis of singularity of complex potentials. The rigid line and the piezoelectric material property combinations upon the image force and the equilibrium position of the dislocation are discussed in detail by the numerical computation.     

压电螺位错与含界面裂纹圆形涂层夹杂的干涉

研究位于基体或夹杂中任意点的压电螺型位错与含界面裂纹圆形涂层夹杂的电弹耦合干 涉问题. 运用复变函数方法，获得了基体，涂层和夹杂中复势函数的一般解答. 典型例 子给出了界面含有一条裂纹时，复势函数的精确级数形式解. 基于已获得的复势函数和广 义Peach-Koehler公式，计算了作用在位错上的像力. 讨论了裂纹几何条件，涂层厚度和材 料特性对位错平衡位置的影响规律. 结果表明，界面裂纹对涂层夹杂附近的位错运动有很大 的影响效应，含界面裂纹涂层夹杂对位错的捕获能力强于完整粘结情况；并发现界面裂纹长 度和涂层材料常数达到某一个临界值时可以改变像力的方向. 解答的特殊情形包含了以 往文献的几个结果.     

Piezomagnetic and piezoelectric poling effects on mode I and II crack initiation behavior of magnetoelectroelastic materials

The ferrite and ferroelectric phase of magnetoelectroelastic (MEE) material can be selected and processed to control the macroscopic behavior of electron devices using continuum mechanics models. Once macro- and/or microdefects appear, the highly intensified magnetic and electric energy localization could alter the response significantly to change the design performance. Alignment of poling directions of piezomagnetic and piezoelectric materials can add to the complexity of the MEE material behavior to which this study will be concerned with.Appropriate balance of distortional and dilatational energy density is no longer obvious when a material possesses anisotropy and/or nonhomogeneity. An excess of the former could result in unwanted geometric change while the latter may lead to unexpected fracture initiation. Such information can be evaluated quantitatively from the stationary values of the energy density function dW/dV. The maxima and minima have been known to coincide, respectively, with possible locations of permanent shape change and crack initiation regardless of material and loading type. The direction of poling with respect to a line crack and the material microstructure described by the constitutive coefficients will be specified explicitly with reference to the applied magnetic field, electric field and mechanical stress, both normal and shear. The crack initiation load and direction could be predicted by finding the direction for which the volume change is the largest. In contrast to intuition, change in poling directions can influence the cracking behavior of MEE dramatically. This will be demonstrated by the numerical results for the BaTiO₃–CoFe₂O₄ composite having different volume fractions where BaTiO₃ and CoFe₂O₄ are, respectively, the inclusion and matrix.To be emphasized is that mode I and II crack behavior will not have the same definition as that in classical fracture mechanics where load and crack extension symmetry would coincide. A striking result is found for a mode II crack. By keeping the magnetic poling fixed, a reversal of electric poling changed the crack initiation angle from θ₀=+80° to θ₀=−80° using the line extending ahead of the crack as the reference. This effect is also sensitive to the distance from the crack tip. Displayed and discussed are results for r/a=10⁻⁴ and 10⁻¹. Because the theory of magnetoelectroelasticity used in the analysis is based on the assumption of equilibrium where the influence of material microstructure is homogenized, the local space and temporal effects must be interpreted accordingly. Among them are the maximum values of (dW/dV)_max and (dW/dV)_min which refer to as possible sites of yielding and fracture. Since time and size are homogenized, it is implicitly understood that there is more time for yielding as compared to fracture being a more sudden process. This renders a higher dW/dV in contrast to that for fracture. Put it differently, a lower dW/dV with a shorter time for release could be more detrimental.     

A piezoelectric screw dislocation near a wedge-shaped bi-material interface

The electro-elastic stress field due to a piezoelectric screw dislocation near the tip of a wedge-shaped bi-material interface is derived. The screw dislocation is subjected to a line charge and a line force at the core. The explicit closed-form analytical solutions for the stress field are derived by means of the complex variable and conformal mapping methods. The stress and electric intensity factors of the wedge tip induced by the dislocation and the image force acting on the dislocation are also formulated and calculated. The influence of the wedge angle and the different bi-material constant combinations on the image force is discussed. Numerical results for three particular wedge angles are calculated and compared.     

On a semi-infinite crack penetrating a piezoelectric circular inhomogeneity with a viscous interface

We investigate a semi-infinite crack penetrating a piezoelectric circular inhomogeneity bonded to an infinite piezoelectric matrix through a linear viscous interface. The tip of the crack is at the center of the circular inhomogeneity. By means of the complex variable and conformal mapping methods, exact closed-form solutions in terms of elementary functions are derived for the following three loading cases: (i) nominal Mode-III stress and electric displacement intensity factors at infinity; (ii) a piezoelectric screw dislocation located in the unbounded matrix; and (iii) a piezoelectric screw dislocation located in the inhomogeneity. The time-dependent electroelastic field in the cracked composite system is obtained. Particularly the time-dependent stress and electric displacement intensity factors at the crack tip, jumps in the displacement and electric potential across the crack surfaces, displacement jump across the viscous interface, and image force acting on the piezoelectric screw dislocation are all derived. It is found that the value of the relaxation (or characteristic) time for this cracked composite system is just twice as that for the same fibrous composite system without crack. Finally, we extend the methods to the more general scenario where a semi-infinite wedge crack is within the inhomogeneity/matrix composite system with a viscous interface.     

Closed-form solution for a mode-III interfacial edge crack between two bonded dissimilar elastic strips

A closed-form solution is obtained for the problem of a mode-III interfacial edge crack between two bonded semi-infinite dissimilar elastic strips. A general out-of-plane displacement potential for the crack interacting with a screw dislocation or a line force is constructed using conformal mapping technique and existing dislocation solutions. Based on this displacement potential, the stress intensity factor (SIF, K_III) and the energy release rate (ERR, G_III) for the interfacial edge crack are obtained explicitly. It is shown that, in the limiting special cases, the obtained results coincide with the results available in the literature. The present solution can be used as the Green’s function to analyze interfacial edge cracks subjected to arbitrary anti-plane loadings. As an example, a formula is derived correcting the beam theory used in evaluation of SIF (K_III) and ERR (G_III) of bimaterials in the double cantilever beam (DCB) test configuration.     

压电螺型位错和共线界面刚性线夹杂的干涉效应

研究了压电材料中压电螺型位错和共线界面导电刚性线夹杂的电弹干涉效应．运用复变函数解析延拓技术与奇性主部分析方法,获得了该问题的一般解答．作为算例,求出了界面含一条刚性线夹杂时两种压电介质区域广义应力函数的封闭形式解．导出了作用在位错上的像力和刚性线夹杂表面剪应力和电位移的解析表达式．讨论了界面刚性线长度,两种材料的剪切模量比和压电系数比对位错力和刚性线表面剪应力的影响规律．为进一步研究该类问题提供了一个基本解。     

On the screw dislocation in a functionally graded piezoelectric plane and half-plane

In this paper closed-form expressions of the electroelastic field induced by a piezoelectric screw dislocation in a functionally graded piezoelectric plane and half-plane are derived. The material properties are assumed to vary exponentially along the x and y-directions. The solution for a screw dislocation in a functionally graded piezoelectric plane is obtained through introduction of two generalized stress functions. The solution for a screw dislocation in a functionally graded piezoelectric half-plane is derived by using the method of image. It is also found that the interaction between a piezoelectric screw dislocation and a circular insulating hole in the functionally graded piezoelectric material can be solved by using series expansion method.     

Green's functions for a piezoelectric semi-infinite body with a fixed conductor surface

By using Stroh's formalism, simple explicit compact expressions of Green's functions for a piezoelectric semi-infinite body, with a fixed conductor surface electrode, subject to a singularity (i.e., a generalized line dislocation and a generalized line force at a point z°) are presented. Coulomb forces acted on the free line charge at z° due to the boundary polarization charges of the medium and the induction charges of the conductor together with the electromechanical coupling effects inside the region are analyzed in detail. The obtained results are valid not only for plane and antiplane problems but also for the coupled problems between inplane and outplane deformations.     

An electric point charge moving along the poling direction of a transversely isotropic piezoelectric solid

The problem of an electric point charge moving constantly along the poling direction of a transversely isotropic piezoelectric solid is considered in a moving coordinate system, which moves together with the electric point charge. A general solution in the moving coordinate system is given, and all the field components, such as displacements, electric potential, stresses and electric displacements, can be concisely expressed in terms of four quasi-harmonic functions. We also present two examples to demonstrate the effect of the moving velocity on the values of _i. Once the general solution is given, the axisymmetric problem of a moving electric point charge can be easily solved. The explicit expressions of all the field components caused by the moving electric charge are presented, and the effect of the moving velocity on these field components is numerically investigated.     

Electroelastic interaction between a piezoelectric screw dislocation and a confocal elliptic blunt crack with elliptical inhomogeneity

The electroelastic interaction between a piezoelectric screw dislocation and an elliptical inhomogeneity containing a confocal blunt crack under infinite longitudinal shear and in-plane electric field is investigated. Using the sectionally holomorphic function theory, Cauchy singular integral, singularity analysis of complex functions and theory of Rieman boundary problem, the explicit series solution of stress field is obtained when the screw dislocation is located in inhomogeneity. The intervention law of the interaction between blunt crack and screw dislocation in inhomogeneity is discussed. The analytical expressions of generalized stress and strain field of inhomogeneity are calculated, while the image force, field intensity factors of blunt crack are also presented. Moreover, a new matrix expression of the energy release rate and generalized strain energy density (SED) are deduced. With the size variation of blunt crack, the results can be reduced to the case of the interaction between a piezoelectric screw dislocation and a line crack in inhomogeneity. Numerical analysis are then conducted to reveal the effects of the dislocation location, the size of inhomogeneity and blunt crack and the applied load on the image force, energy release rate and strain energy density. The influence of dislocation on energy release rate and strain energy density is also revealed.     

Peierls stress for （110） {001} mixed dislocation in SrTiO3 within framework of constrained path approximation

The core structure of （110）{001} mixed disloca- tion in perovskite SrTiO3 is investigated with the modified two-dimensional Peierls-Nabarro dislocation equation con- sidering the discreteness effect of crystals. The results show that the core structure of mixed dislocation is independent of the unstable energy in the （100） direction, but closely related to the unstable energy in the （110） direction which is the direction of total Burgers vector of mixed dislocation. Furthermore, the ratio of edge displacement to screw one nearly equals to the tangent of dislocation angle for differ- ent unstable energies in the （110） direction. Thus, the con- strained path approximation is effective for the （110）{001} mixed dislocation in SrTiO3 and two-dimensional equation can degenerate into one-dimensional equation that is only related to the dislocation angle. The Peierls stress for （110） {001 } dislocations can be expediently obtained with the one-dimensional equation and the predictive values for edge, mixed and screw dislocations are 0.17, 0.22 and 0.46 GPa, respectively.     

Interaction of a screw dislocation with a semi-infinite interfacial crack in a magneto-electro-elastic bi-material

The interaction between a screw dislocation and a semi-infinite interfacial crack in a transversely isotropic magneto-electro-elastic bi-material is investigated. The dislocation line is perpendicular to the isotropic basal plane of the bi-material. The elastic and electromagnetic fields induced by the dislocation are obtained through the use of the complex variable method together with the superposition scheme. The stress, electric displacement and magnetic intensity factors as well as the image exerted on the dislocation are given explicitly. We find that the intensity factors are expressed in terms of the so-called effective materials and the radial component of the image force is only dependent on the elastic modulus of the material with the dislocation. As an illustrative example, the bi-material that consists of piezoelectric and piezomagnetic phases is analyzed.     

A screw dislocation near a non-elliptical piezoelectric inhomogeneity with internal uniform electroelastic field

Conformal mapping and analytic continuation are employed to prove the existence of an internal uniform electroelastic field inside a non-elliptical piezoelectric inhomogeneity interacting with a screw dislocation. We focus specifically on the case when the piezoelectric matrix surrounding the inhomogeneity is subjected to uniform remote anti-plane mechanical and in-plane electrical loading and a constraint is imposed between the remote loading and the screw dislocation. The constraint can be expressed in a relatively simple decoupled form by utilizing orthogonality relationships between two corresponding eigenvectors. The internal uniform electroelastic field is found to be independent of the presence of the screw dislocation; moreover, it can be expressed in decoupled form.     

ANALYSIS OF A SCREW DISLOCATION INSIDE A CIRCULAR INCLUSION WITH INTERFACIAL CRACKS IN PIEZOELECTRIC COMPOSITES

IntroductionPiezoelectric materials have potentials for use in many modern devices and compositestructures. The presence of various defects, such as inclusions, holes, dislocations andcracks, can greatly influence their characteristics and coupled behavio…