Dynamical properties of the water molecules in the hydration shells of Fe(II) and Fe(III) ions: ab initio QM/MM molecular dynamics simulations

Dynamical properties, librational and vibrational motions of water molecules in the first and second hydration shells of the Fe(II) and Fe(III) ion were evaluated by means of velocity autocorrelation functions obtained by combined quantum mechanical/molecular mechanical molecular dynamics (QM/MM-MD) simulations. The frequencies of rotation around three principal axes and the frequencies of intramolecular vibration of the water molecules in the first hydration shells obtained from the simulations are blue-shifted for both ions compared to those observed experimentally for liquid water. The intramolecular geometry of water molecules in the quantum mechanically treated region (ion plus first hydration shell) shows shorter O–H bonds and wider H–O–H angles than the bulk solvent.     

Solvation of calcium ions in methanol-water mixtures: molecular dynamics simulation

Molecular dynamics simulations of CaCl2 solutions in water and methanol-water mixtures, with methanol concentrations of 5, 10, 50, and 90 mol %, at room temperature, have been performed. The methanol and water molecules have been modeled as flexible three-site bodies. Solvation of the calcium ions has been discussed on the basis of the radial and angular distribution functions, the orientation of the solvent molecules, and their geometrical arrangement in the coordination shells. Analysis of the H-bonds of the solvent molecules coordinated by Ca2+ has been done. Residence time of the solvent molecules in the coordination shell has been calculated. The preferential hydration of the calcium ions has been found over the whole range of the mixture composition. The water concentration in the first and second coordination shells of Ca2+ significantly exceeds the water content in the solution, despite the very similar interaction energy of the calcium ion with water and methanol. In aqueous solution and methanol-water mixtures, the first coordination shell of Ca2+ is irregular and long-living. The solvent molecules prefer the anti-dipole arrangement, but, in aqueous solutions and water-rich mixtures, the water molecules in the primary shell have only one H-bonded neighbor.     

Water structure about the dimer and hexamer repeat units of amylose from molecular dynamics computer simulations

We have analyzed a set of molecular dynamics (MD) trajectories of maltose in vacuum and water for solute imposed structuring on the solvent. To do this, we used a novel technique to calculate water probability densities to locate the areas in which the solvent is most populated in the maltose solution. We found that only the layer of water within the first maltose hydration shell has a probability density 50% and greater than that of bulk water. On investigating this water layer using Voronoi polyhedra (VP) analysis it was seen that only the waters adjacent to the hydrophobic (CH and CH₂) groups are more structured than bulk water. We found that in a maltose solution of approximately 1.0 g/cm³ the solute does not disrupt the structure of the surrounding water beyond the first hydration shell. Next we performed a 700‐ps MD simulation of a maltohexaose strand in a box of 4096 SPC/E waters. The water probability density calculations and the VP analysis of the maltohexaose solution show that the larger amylose repeat unit decreases the solvent configurational entropy of the water beyond the first hydration shell. Analysis of this trajectory reveals that the helical conformation of the maltohexaose strand is preserved via bridging intermolecular water hydrogen bonds, indicating that a single amylose helical turn in water is preserved by hydrophilic and not hydrophobic interactions. Using VP analysis we present a method to accurately determine the number of water molecules in the first hydration shell of dissolved solutes. In the case of maltose, there are 40 water molecules in this shell, while for maltohexaose the number is 98. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 445–456, 2001     

Potential of mean force of hydrophobic association: dependence on solute size

The potentials of mean force (PMFs) were determined for systems involving formation of nonpolar dimers composed of methane, ethane, propane, isobutane, and neopentane, respectively, in water, using the TIP3P water model, and in vacuo. A series of umbrella-sampling molecular dynamics simulations with the AMBER force field was carried out for each pair in either water or in vacuo. The PMFs were calculated by using the weighted histogram analysis method (WHAM). The shape of the PMFs for dimers of all five nonpolar molecules is characteristic of hydrophobic interactions with contact and solvent-separated minima and desolvation maxima. The positions of all these minima and maxima change with the size of the nonpolar molecule, that is, for larger molecules they shift toward larger distances. The PMF of the neopentane dimer is similar to those of other small nonpolar molecules studied in this work, and hence the neopentane dimer is too small to be treated as a nanoscale hydrophobic object. The solvent contribution to the PMF was also computed by subtracting the PMF determined in vacuo from the PMF in explicit solvent. The molecular surface area model correctly describes the solvent contribution to the PMF together with the changes of the height and positions of the desolvation barrier for all dimers investigated. The water molecules in the first solvation sphere of the dimer are more ordered compared to bulk water, with their dipole moments pointing away from the surface of the dimer. The average number of hydrogen bonds per water molecule in this first hydration shell is smaller compared to that in bulk water, which can be explained by coordination of water molecules to the hydrocarbon surface. In the second hydration shell, the average number of hydrogen bonds is greater compared to bulk water, which can be explained by increased ordering of water from the first hydration shell; the net effect is more efficient hydrogen bonding between the water molecules in the first and second hydration shells.     

Speciation of the curium(III) ion in aqueous solution: a combined study by quantum chemistry and molecular dynamics simulation

The structures of aquo complexes of the curium(III) ion have been systematically studied using quantum chemical and molecular dynamics (MD) methods. The first hydration shell of the Cm3+ ion has been calculated using density functional theory (DFT), with and without inclusion of the conductor-like polarizable continuum medium (CPCM) model of solvation. The calculated results indicate that the primary hydration number of Cm3+ is nine, with a Cm-O bond distance of 2.47-2.48 A. The calculated bond distances and the hydration number are in excellent agreement with available experimental data. The inclusion of a complete second hydration shell of Cm3+ has been investigated using both DFT and MD methods. The presence of the second hydration shell has significant effects on the primary coordination sphere, suggesting that the explicit inclusion of second-shell effects is important for understanding the nature of the first shell. The calculated results indicate that 21 water molecules can be coordinated in the second hydration shell of the Cm3+ ion. MD simulations within the hydrated-ion model suggest that the second-shell water molecules exchange with the bulk solvent with a lifetime of 161 ps.     

Hydration of synthetic polydialkylphosphate (PPF) — a simplified model for natural teichoic acids

The hydration of synthetic poly(P-hydroxy 1,3 propylenephosphate) in hydrogen and mixed H⁺-Mg⁺² forms has been studied by means of the pulsed NMR method. This polymer may be regarded as a simplified model of natural teichoic acids appearing in a cell wall of gram-positive bacteria. The investigations of nuclear magnetic relaxation of water protons in polymer gels prove the existence of two phases of water. One is water strongly bound to phosphate groups which does not freeze at low temperature and the other is weakly bound water freezing at 243–253 K. The distribution of correlation times has been stated for water in the first hydration shell of phosphate groups. For both acid and magnesium salt forms the hydration shell is composed of three water molecules.     

Orientational dynamics for an amphiphilic-solvent solution

In this work, we performed Monte Carlo simulations on a lattice model for spontaneous amphiphilic aggregation, in order to study the orientational and hydrogen-bonding dynamics of water on different regions inside the micellar solution. We employed an associating lattice gas model that mimics the aqueous solvent, which presents a rich phase diagram with first- and second-order transition lines. Even though this is a simplified model, it makes possible to investigate the orientational dynamics of water in an equilibrium solution of amphiphiles, as well as the influence of the different phases of the solvent in the interfacial and bulk water dynamics. By means of extensive simulations, we showed that, at high temperatures, the behavior of the orientational relaxation and hydrogen bonding of water molecules in the bulk, first, and second hydration shells are considerable different. We observe the appearance of a very slow component for water molecules in the first hydration shell of micelles when the system reaches a high-density phase, consistent with previous theoretical and experimental studies concerning biological water. Also, at high temperatures, we find that water molecules in the second hydration shell of micelles have an orientational decay similar to that of bulk water, but with a generally slower dynamics. Otherwise, at low temperatures, we have two components for the orientational relaxation of bulk water in the low density liquid phase, and only a single component in the high density liquid (HDL) phase, which reflect the symmetry properties of the different phases of the solvent model. In the very dense region of water molecules in the first hydration shell of micelles at low temperatures, we find two components for the orientational relaxation on both liquid phases, one of them much slower than that in the single component of bulk water in the HDL phase. This happens even though our model does not present any hindrance to the water rotational freedom caused by the presence of the amphiphiles.     

When is a molecule properly solvated by a continuum model or in a cluster ansatz? A first-principles simulation of alanine hydration

In order to test the validity of the cluster ansatz approach as well as of the continuum model approach and to learn about the solvation shell, we carried out first-principles molecular dynamics simulations of the alanine hydration. Our calculations contained one alanine molecule dissolved in 60 water molecules. Dipole moments of individual molecules were derived by means of maximally localized Wannier functions. We observed an average dipole moment of about 16.0 D for alanine and of about 3.3 D for water. In particular, the average water dipole moment in proximity of alanine's COO(-) group decayed continously with increasing distance, while, surprisingly, close to the CH3 and NH3+ group, the dipole moment first rose before its value dropped. In a cluster ansatz approach, we considered snapshots of alanine surrounded by different water molecule shells. The dipole moments from the cluster approaches utilizing both maximally localized Wannier functions as well as natural population analysis served to approximate the dipole moments of the total trajectory. Sufficient convergence of the cluster ansatz approach is found for either of the two solvent shells around the polar groups and one solvent shell around the apolar groups or two solvent shells around the polar groups surrounded by a dieletric continuum.     

Hydration of the Calcium Dication: Direct Evidence for Second Shell Formation from Infrared Spectroscopy

Infrared laser action spectroscopy in a Fourier‐transform ion cyclotron resonance mass spectrometer is used in conjunction with ab initio calculations to investigate doubly charged, hydrated clusters of calcium formed by electrospray ionization. Six water molecules coordinate directly to the calcium dication, whereas the seventh water molecule is incorporated into a second solvation shell. Spectral features indicate the presence of multiple structures of Ca(H₂O)₇²⁺ in which outer‐shell water molecules accept either one (single acceptor) or two (double acceptor) hydrogen bonds from inner‐shell water molecules. Double‐acceptor water molecules are predominately observed in the second solvent shells of clusters containing eight or nine water molecules. Increased hydration results in spectroscopic signatures consistent with additional second‐shell water molecules, particularly the appearance of inner‐shell water molecules that donate two hydrogen bonds (double donor) to the second solvent shell. This is the first reported use of infrared spectroscopy to investigate shell structure of a hydrated multiply charged cation in the gas phase and illustrates the effectiveness of this method to probe the structures of hydrated ions.     

Revisiting the structure and dynamics of hydrated Cd2+ in aqueous solutions: Insights from the RI-SCS-MP2/MM molecular dynamics simulation

The spin component scale MP2/molecular mechanics molecular dynamics simulation investigated the hydration shell formation and hydrated Cd²⁺ dynamics in the water environment. At the first hydration shell, six water molecules with 2.27 Å for the average distance between water and Cd²⁺. Dynamical properties were analyzed by computing the water molecule's mean residence time (MRT) in its first and second hydration shells. The MRT of each shell was determined to be 31.8 and 1.92 ps, suggesting the strong influence of Cd²⁺ in the first hydration shell. The second shell was labile, with an average number of water molecules being 18. Despite the strong interaction between Cd²⁺ and water molecules in the first shell, the influence of ions in the second hydration shell remained weak.     

Ions in water: the microscopic structure of concentrated hydroxide solutions

Neutron-diffraction data on aqueous solutions of hydroxides, at solute concentrations ranging from 1 solute per 12 water molecules to 1 solute per 3 water molecules, are analyzed by means of a Monte Carlo simulation (empirical potential structure refinement), in order to determine the hydration shell of the OH- in the presence of the smaller alkali metal ions. It is demonstrated that the symmetry argument between H+ and OH- cannot be used, at least in the liquid phase at such high concentrations, for determining the hydroxide hydration shell. Water molecules in the hydration shell of K+ orient their dipole moment at about 45 degrees from the K+-water oxygen director, instead of radially as in the case of the Li+ and Na+ hydration shells. The K+-water oxygen radial distribution function shows a shallower first minimum compared to the other cation-water oxygen functions. The influence of the solutes on the water-water radial distribution functions is shown to have an effect on the water structure equivalent to an increase in the pressure of the water, depending on both ion concentration and ionic radius. The changes of the water structure in the presence of charged solutes and the differences among the hydration shells of the different cations are used to present a qualitative explanation of the observed cation mobility.     

Structure and dynamics of Au+ ion in aqueous solution: ab initio QM/MM MD simulations

Structure and dynamics of hydrated Au(+) have been investigated by means of molecular dynamics simulations based on ab initio quantum mechanical molecular mechanical forces at Hartree-Fock level for the treatment of the first hydration shell. The outer region of the system was described using a newly constructed classical three-body corrected potential. The structure was evaluated in terms of radial and angular distribution functions and coordination number distributions. Water exchange processes between coordination shells and bulk indicate a very labile structure of the first hydration shell whose average coordination number of 4.7 is a mixture of 3-, 4-, 5-, 6-, and 7-coordinated species. Fast water exchange reactions between first and second hydration shell occur, and the second hydration shell is exceptionally large. Therefore, the mean residence time of water molecules in the first hydration shell (5.6 ps/7.5 ps for t*= 0.5 ps/2.0 ps) is shorter than that in the second shell (9.4 ps/21.2 ps for t*= 0.5 ps/2.0 ps), leading to a quite specific picture of a "structure-breaking" effect.     

Perturbation of water structure due to monovalent ions in solution

The ion induced modification to the tetrahedral structure of water is a topic of much current interest. We address this question by interpreting neutron diffraction data from monovalent ionic solutions of NaCl and KCl using a computer assisted structural modeling technique. We investigate the effect that these ions have on the water-water O-O, O-H and H-H radial distribution functions as a function of ionic concentration. It is found that the O-H and H-H functions are only marginally affected by ionic composition, signaling that hydrogen bonding between water molecules remains largely intact, even at the highest concentrations. On the other hand the O-O functions are strongly modified by the ions. In particular the position of the second peak in g(OO)(r), is found to move inwards with increasing salt concentration, in a manner closely analogous to what happens in pure water under pressure. Furthermore by recalculating g(OO)(r) after excluding all the water molecules in the first hydration shell of each ion, we show that this structural perturbation exists outside the first hydration shell of the ions.     

Tl(I)‐the strongest structure‐breaking metal ion in water? A quantum mechanical/molecular mechanical simulation study

Structural and dynamical properties of the Tl(I) ion in dilute aqueous solution have been investigated by ab initio quantum mechanics in combination with molecular mechanics. The first shell plus a part of the second shell were treated by quantum mechanics at Hartree-Fock level, the rest of the system was described by an ab initio constructed potential. The radial distribution functions indicate two different bond lengths (2.79 and 3.16 A) in the first hydration shell, in good agreement with large-angle X-ray scattering and extended X-ray absorption fine structure spectroscopy results. The average first shell coordination number was found as 5.9, and several other structural parameters such as coordination number distributions, angular distribution functions, and tilt- and theta-angle distributions were evaluated. The ion-ligand vibration spectrum and reorientational times were obtained via velocity auto correlation functions. The Tl-O stretching force constant is very weak with 5.0 N m(-1). During the simulation, numerous water exchange processes took place between first and second hydration shell and between second shell and bulk. The mean ligand residence times for the first and second shell were determined as 1.3 and 1.5 ps, respectively, indicating Tl(I) to be a typical "structure-breaker". The calculated hydration energy of -84 +/- 16 kcal mol(-1) agrees well with the experimental value of -81 kcal mol(-1). All data obtained for structure and dynamics of hydrated Tl(I) characterize this ion as a very special case among all monovalent metal ions, being the most potent "structure-breaker", but at the same time forming a distinct second hydration shell and thus having a far-reaching influence on the solvent structure.     

Be(II) in aqueous solution--an extended ab initio QM/MM MD study

An ab initio quantum mechanical/molecular mechanical (QM/MM) molecular dynamics (MD) simulation at double-zeta restricted Hartree-Fock (RHF) level was performed at 293.15 K, including first and second hydration shell in the QM region to study the structural and dynamical properties of the Be(II)-hydrate in aqueous solution. The first tetrahedrally arranged hydration shell, with the four water molecules located at a mean Be-O distance of 1.61 A, is highly inert with respect to ligand exchange processes. The second shell, however, consisting in average of approximately 9.2 water ligands at a mean Be-O distance of 3.7 A and the third shell at a mean Be-O distance of 5.4 A with approximately 19 ligands rapidly exchange water molecules between them and with the bulk, respectively. Other structural parameters such as radial and angular distribution functions (RDF and ADF) and tilt- and theta-angle distributions were also evaluated. The dynamics of the hydrate were studied in terms of ligand mean residence times (MRTs) and librational and vibrational frequencies. The mean residence times for second shell and third shell ligands were determined as 4.8 and 3.2 ps, respectively. The Be-O stretching frequency of 658 cm(-1), associated with a force constant of 147 N m(-1) could be overestimated but it certainly reflects the exceptional stability of the ion-ligand bond in the first hydration shell.     

Quantum-mechanical studies of environmental effects on biomolecules VI.Ab initio Studies on the hydration scheme of the phosphate group

Ab initio SCF computations using the STO 3G basis set have been performed on the hydration scheme of the dimethylphosphate anion (DMP^?) within the “supermolecule” approach. This model compound represents the phosphate group in nucleic acids, phospholipid components of membranes and a number of other important biological structures. In the first place the principal hydration sites for the fixation of a water molecule have been established and this was followed by the determination of the polyhydration scheme of the first solvation shell, which may involve up to six water molecules. The effect of hydration on the relative stabilities of thegg,gt andtt forms of (DMP^?) was evaluated. The study was extended to the computation of the energies of interaction in the second and third hydration shells and the conclusion was reached that organized hydration around (DMP^?) is essentially limited to two hydration shells with possible residual organization of a third shell around specific sites. The structure of the bound water was investigated. Charge transfer is observed from (DMP^?) to the bound water, the perturbation extending essentially to the first and with decreasing intensity, to the second hydration shell.     

Local order in aqueous NaCl solutions and pure water: X-ray scattering and molecular dynamics simulations study

The microstructures of pure water and aqueous NaCl solutions over a wide range of salt concentrations (0-4 m) under ambient conditions are characterized by X-ray scattering and molecular dynamics (MD) simulations. MD simulations are performed with the rigid SPC water model as a solvent, while the ions are treated as charged Lennard-Jones particles. Simulated data show that the first peaks in the O...O and O...H pair correlation functions clearly decrease in height with increasing salt concentration. Simultaneously, the location of the second O...O peak, the signature of the so-called tetrahedral structure of water, gradually disappears. Consequently, the degree of hydrogen bonding in liquid water decreases when compared to pure fluid. MD results also show that the hydration number around the cation decreases as the salt concentration increases, which is most likely because some water molecules in the first hydration shell are occasionally substituted by chlorine. In addition, the fraction of contact ion pairs increases and that of solvent-separated ion pairs decreases. Experimental data are analyzed to deduce the structure factors and the pair correlation functions of each system. X-ray results clearly show a perturbation of the association structure of the solvent and highlight the appearance of new interactions between ions and water. A model of intermolecular arrangement via MD results is then proposed to describe the local order in each system, as deduced from X-ray scattering data.     

Long-range influence of carbohydrates on the solvation dynamics of water--answers from terahertz absorption measurements and molecular modeling simulations

We present new terahertz (THz) spectroscopic measurements of solvated sugars and compare the effect of two disaccharides (trehalose and lactose) and one monosaccharide (glucose) with respect to the solute-induced changes in the sub-picosecond network dynamics of the hydration water. We found that the solute affects the fast collective network motions of the solvent, even beyond the first solvation layer. For all three carbohydrates, we find an increase of 2-4% in the THz absorption coefficient of the hydration water in comparison to bulk water. Concentration-dependent changes in the THz absorption between 2.1 and 2.8 THz of the solute-water mixture were measured with a precision better than 1% and were used to deduce a dynamical hydration shell, which extends from the surface up to 5.7 +/- 0.4 and 6.5 +/- 0.9 A for the disaccharides lactose and trehalose, respectively, and 3.7 +/- 0.9 A for the glucose. This exceeds the values for the static hydration shell as determined, for example, by scattering, where the long-range structure was found to be not significantly affected by the solute beyond the first hydration shell. When comparing all three carbohydrates, we found that the solute-induced change in the THz absorption depends on the product of molar concentration of the solute and the number of hydrogen bonds between the carbohydrate and water molecules. We can conclude that the long-range influence on the sub-picosecond collective water network motions of the hydration water is directly correlated with the average number of hydrogen bonds between the molecule and adjacent water molecules for carbohydrates. This implies that monosaccharides have a smaller influence on the surrounding water molecules than disaccharides. This could explain the bioprotection mechanism of sugar-water mixtures, which has been found to be more effective for disaccharides than for monosaccharides.     

Quantum mechanical charge field molecular dynamics simulation of the TiO2+ ion in aqueous solution

Structural and dynamical properties of the TiO(2+) ion in aqueous solution have been investigated by using the new ab initio quantum mechanical charge field (QMCF) molecular dynamics (MD) formalism, which does not require any other potential functions except those for solvent-solvent interactions. Both first and second hydration shell have been treated at Hartree-Fock (HF) quantum mechanical level. A Ti-O bond distance of 1.5 A was observed for the [Ti=O](2+) ion. The first hydration shell of the ion shows a varying coordination number ranging from 5 to 7, five being the dominant one and representing one axial and four equatorial water molecules directly coordinated to Ti, which are located at 2.3 A and 2.1 A, respectively. The flexibility in the coordination number reflects the fast exchange processes, which occur only at the oxo atom, where water ligands are weakly bound through hydrogen bonds. Considering the first shell hydration, the composition of the TiO(2+) hydrate can be characterized as [(H(2)O)(0.7)(H(2)O)(4) (eq)(H(2)O)(ax)](2+). The second shell consists in average of 12 water molecules located at a mean distance of 4.4 A. Several other structural parameters such as radial and angular distribution functions and coordination number distributions were analyzed to fully characterize the hydration structure of the TiO(2+) ion in aqueous solution. For the dynamics of the TiO(2+) ion, different sets of dynamical parameters such as Ti=O, Ti-O(eq), and Ti-O(ax) stretching frequencies and ligands' mean residence times were evaluated. During the simulation time of 15 ps, 3 water exchange processes in the first shell were observed at the oxo atom, corresponding to a mean residence time of 3.6 ps. The ligands' mean residence time for the second shell was determined as 3.5 ps.