Optimization via liquid phase mixtures in capillary gas chromatography

The use of sequentially coupled columns to achieve a binary liquid phase mixture has been simplified by the availability of zero dead volume fittings compatible with fused silica columns. The extent to which the velocity gradient through the coupled column affects the “apparent” liquid phase ratio can be determined by graphic interpolation; the length ratio of the coupled column segments can then be adjusted so that the “apparent” liquid phase ratio actually experienced by the solutes agrees with the targeted value. The fact that the direction of flow through the coupled column affects the chromatographic dispersion suggests that accepted generalizations on flow optimization throughout the column may not be precisely correct.     

Fractionation of glycoproteins according to lectin affinity and molecular size using a high-performance liquid chromatography system with sequentially coupled columns

The lectin phytohaemagglutinin was coupled to porous silica (10 micron) and used as adsorbent in a high-performance liquid affinity column sequentially coupled to a TSK-G 3000SW gel permeation column. This system was used for high-speed separation/analysis of human serum glycoproteins according to their lectin affinity and molecular size. Serum samples could be resolved in at least six different peaks representing glycoproteins exhibiting different molecular weights but with a carbohydrate content compatible with the specificity of phytohaemagglutinin.     

Optimization of a high‐resolution radical scavenging assay coupled on‐line to reversed‐phase liquid chromatography for antioxidant detection in complex natural extracts

This paper reports the optimization of the on‐line coupling of 2,2′‐azinobis(3‐ethylbenzothiazoline)‐6‐sulfonic acid based radical scavenging assays with reversed‐phase high‐performance liquid chromatography. The residence time in the reactor was reduced to 6.4 s to ensure minimal peak broadening and loss of separation. Peak capacity losses between compound detection and measurement of the radical scavenging potential were reduced to 10% and lower on coupled column systems. The methodology was successfully applied for the detection of the scavenging activity of molecules encompassing a broad hydrophobicity range. The method shows promise for the assessment of low‐molecular‐weight polyphenols in red wine by coupled‐column high‐resolution high‐performance liquid chromatography with mass spectrometry analysis.     

Modelling the gas chromatographic separation of multicomponent samples on a system of three open-tubular columns coupled in series

A procedure was developed for modelling the gas chromatographic separation on a system of columns coupled in series. This procedure can be used for computer based optimization of lengths and order of serially coupled columns at isothermal conditions. The sample component retention factors and column resistances needed for the model can easily be measured on each individual column. The proposed procedure was verified by analyzing a 52 component hydrocarbon mixture on three columns of different polarity coupled in series by various column orders. Good agreement between experimental and calculated retention data was found. The procedure is also well suited for optimization of the chromatographic selectivity by coupling columns with different selectivity in series.Dedicated to Professor Dr. h.c. mult. J.F.K. Huber on the occasion of his 70th birthday     

The optimization of capacity and efficiency when coupling fused silica open tubular columns in gas chromatography

Summary There are a number of parameters which have to be chosen depending on the analysis being done in gas chromatography. While the choice of stationary phase material is based on the solutes to be separated, the thickness is dependent on the concentration and the volatility of the components to be analyzed. This study undertakes a coupled column phase ratio optimization by connecting a short piece of a particular column prior to a normal length of an analytical column. Various columns of different dimensions (phase ratio), but of the same stationary phase material (methyl silicone), are coupled together by a deactivated glass press-fit connector, and the efficiency and capacity are measured. The coupling of fused silica open tubular columns is optimized in efficiency by matching or decreasing the phase ratio of successive columns. Capacity optimization is accomplished by increasing the phase ratio of consecutive columns. Capacity and efficiency optimization are opposing each other; therefore, if some efficiency can be sacrificed a substantial increase in capacity is possible.     

Separation and identification of illicit heroin samples by liquid chromatography using an alumina and C18 coupled column system and photodiode array detection

The analysis of illicit heroin and opium samples on a coupled alumina and C18 column system is described. The compounds to be analysed can be divided into two groups: those with low pKa values, such as caffeine, papaverine and noscapine, and those with high pKa values, such as heroin, acetylcodeine, O6-monoacetylmorphine, procaine, codeine, morphine and strychnine. The first group can best be separated on a C18 column, whereas alumina is more suitable for the second group. Previously reported criteria for choosing proper buffer systems for ion-exchange separations on alumina were used together with an iterative regressive optimization procedure developed in our laboratory. The system can be used with and without valve-switching, depending on the sample type. The peak purity of the judicially important components heroin and O6-monoacetylmorphine has been checked with a photodiode array detector and by use of advanced software.     

Simultaneous determination of arsenic(III) and arsenic(V) by flow injection–inductively coupled plasma–atomic emission spectrometry (ICP-AES) with ultrasonic nebulization

A dual-column protocol for the sequential determination of As(III) and As(V) is described using inductively coupled plasma-atomic emission spectrometry (ICP-AES) with ultrasonic nebulization (USN). This procedure employed a 16-way valve containing two different homemade mini columns for selective preconcentration of As(III) and As(V). One column was filled with Muromac A-1, which selectively preconcentrated As(III) at pH 3 after complexation with ammonium pyrrolidine dithiocarbamate (APDC, 0.05%). The effluent of the first column was then passed through the second column, which was filled with an anion-exchange resin to collect As(V). By using 0.6 M sodium hydroxide, both species were eluted sequentially and measured by ICP-AES. Enrichment factors of 136 (17 for micro column x8 for USN) for As(V) and 160 (20 for micro column x8 for USN) for As(III) were achieved with 4 min preconcentration. With the proposed procedure, the detection limits were calculated to be 0.7 micro g L(-1) for As(V) and 0.8 micro g L(-1) for As(III) based on (3 sigma) blank determination ( N=10). The relative standard deviations for 20 micro g L(-1) of As(V) and As(III) were 5.8% and 6.5%, respectively. The recovery for spiked water samples was in the range of 85-112%.     

Computer-aided selection and optimization of chromatographic columns and conditions for multicolumn analysis procedures

Clearly, the usefulness of a computer-aided column design program will depend on its ability to predict quickly and accurately, a design which will yield chromatograms closely approximating those obtained experimentally. Such a computer model for designing and specifying operating conditions for optimum performance of either single or serially coupled columns with different stationary phases is described herein. Tests have been performed in order to verify the accuracy of the model. In addition to single column optimization and the design of column combinations which can be used to achieve separations difficult or impossible on a single phase alone, the model has proven quite useful as an aid to the design and development of multicolumn analysis procedures that involve critical timing of valve-switching sequences.     

Parallel supercritical fluid chromatography/mass spectrometry system for high-throughput enantioselective optimization and separation

An automated parallel four-column supercritical fluid chromatography (SFC)/MS system to perform high-throughput enantioselective chromatographic method development and optimization is described in this paper. The initial screening was performed in parallel on four chiral SFC columns over several buffer conditions. Optimization of the separation of enantiomers was achieved on a single chiral column. The screening and optimization were accomplished in a fully automated, user-independent manner. Incorporation of column control valves in front of each chiral column allowed the system to switch from parallel four-column screening mode to single-column optimization mode. To facilitate the process, a custom software program, we termed, intelligent parallel optimization for chiral SFC separation (IPOCSS), was developed in-house. The custom software monitored each of the runs in real-time, processed each data set, and by incorporating user-defined criteria (e.g., resolution of the two enantiomer chromatographic peaks), selected the next set of experiments and automatically optimized the enantioseparation. This new approach, combining parallel SFC/MS screening and intelligent software-controlled method optimization, has resulted in a streamlined, high-throughput tool for enantioselective method development, which has been applied successfully to enantioseparations in support of drug discovery.     

Application of high-surface-area ZrO2 in preconcentration and determination of 18 elements by on-line flow injection with inductively coupled plasma atomic emission spectrometry

A flow-injection analysis (FIA) system incorporating a micro-column of ZrO2 has been used for the development of an on-line multi-element method for the simultaneous preconcentration and determination of Al, Bi, Cd, Co, Cr, Cu, Fe, Ga, In, Mn, Mo, Ni, Pb, Tl, V, Sb, Sn, and Zn by inductively coupled plasma atomic emission spectrometry (ICP-AES). The conditions for quantitative and reproducible preconcentration, elution, and subsequent on-line ICP-AES determination were established. A sample (pH 8) is pumped through the column at 3 mL min(-1) and sequentially eluted directly into the ICP-AES with 3 mol L(-1) HNO3. With a sample volume of 100 mL and an elution volume of 1 mL signal enhancement 100 times better than for conventional continuous aspirating systems was obtained for the elements studied. The reproducibility (RSD %) of the method at the 10 ng mL(-1) level in the eluate is acceptable - less than 8% for five replicates. Recoveries between 95.4% and 99.9% were obtained for the elements analysed. ZrO2, with a specific surface area of 57 m2 g(-1) and a capacity of approximately 5 mg g(-1) for the elements studied, was synthesized by hydrolysis of ZrCl4. The preconcentration system was evaluated for several simple synthetic matrices, standard water samples and synthetic seawater. The effect of foreign ions on the efficiency of preconcentration of the elements studied was investigated. The application of a micro-column filled with high-surface-area ZrO2 and flow injection inductively coupled plasma atomic emission spectrometry enables preconcentration and simultaneous determination of 18 elements at low concentrations (ng L(-1)) in different water samples.     

Concepts and comparisons in multidimensional separation

Multidimensional separation methodology provides a mechanism for a very substantial increase in the resolving power of chromatographic and related systems. After defining the conditions required for multidimensional separation and reviewing the origin of its high resolving power, a comparison is drawn between the two principal kinds of multidimensional systems, represented by continuous two-dimensional operation and coupled column assemblies. It is shown that their roles are complementary. The two-dimensional system gives a broad powerful overview of a sample while the coupled column system can be used flexibly to magnify and resolve selected regions of the sample space.     

Enrichment and quantification of 18 polycyclic aromatic hydrocarbons from intermediates for plastics production by a generic liquid chromatography column switching

The polycyclic aromatic hydrocarbon concentration in plastic products is regulated in (European Union) No. 1272/2013. However, this only covers the end products and not intermediate substances. Therefore, a generic method was developed to analyze the polycyclic aromatic hydrocarbons listed by the Environmental Protection Agency and the European Union. This method is based on direct large volume injection from solutions of plastic additives followed by liquid chromatography coupled to fluorescence detection. The additives Irganox 1010, ureido methacrylate, and cetyl methacrylate 1618F were used as examples for method development. Two serially coupled columns allowed the matrix to be removed on the first column and the analytes to be separated on the second column. The columns were connected by an intermediate valve. The valve allowed the matrix to be diverted after the first column and water to be dosed upstream of the second column via an additional pump. This allowed samples in aqueous or organic media to be focused at the column head. An injection volume of 100 μl and online aqueous dilution of 1:3 led to a limit of detection below 1 ng/ml for 15 polycyclic aromatic hydrocarbons. Moreover, concentrations between 1.6 and 10.3 ng/ml were found in the three plastic additives.     

Automated liquid chromatographic analysis of drugs in urine by on-line sample cleanup and isocratic multi-column separation

A multi-column system has been developed for automated analysis of basic drugs in urine. Two polymeric pre-columns, containing PRP-1 and Aminex A-28, were used to isolate the drugs. A short reversed-phase column, coupled to a 150 x 4.6 mm I.D. silica column, produced the analytical separation. Sample preparation consisted of dilution and centrifugation. The entire procedure required less than 30 min. Careful optimization of mobile phase conditions led to retention of benzoylecgonine and barbiturates. For most drugs, levels of 0.3 mg/l were sufficient to produce peaks that could be matched against stored spectra with a computerized library search program.     

填充毛细管液相色谱-毛细管气相色谱在线联用分析八角茴香挥发油

首次将填充毛细管高效液相色谱-毛细管气相色谱在线联用技术(μ-HPLC-CGC)用于分离分析八角茴香果实的挥发油成分。液相色谱选用氰基分析柱(250 mm×0.32 mm i.d.),正己烷-乙腈-二氯甲烷(体积比为80∶8∶12)为流动相,对挥发油样品做族组分分离,得到的5个族组分被依次存放在多位储存接口内,然后不分流分别转入毛细管气相色谱仪做详细分析。气相色谱柱由10 m×0.53 mm i.d.保留间隔柱和30 m×0.53 mm i.d.×1.0 μm SE-54分析柱组成。采用了不分流柱内进样模     

Simultaneous Determination of Two Types of Active Components with Different Physicochemical Properties in Kushen by HPLC-UV

A simple, reliable and accurate high performance liquid chromatography(HPLC) coupled with a UV detector at varied wavelength was developed for the quantitation of two types of anti-carcinogenic compounds, namely, Kushen alkaloids(KS-As) and Kushen flavonoids(KS-Fs), in Kushen. Their remarkable difference in physicochemical properties was circumvented by integrated optimization of column and mobile phase. The separation was achieved on an alkaline-resisting C18 column via gradient elution with acetonitrile(A...     

Adsorption Characteristics of Pb(II) and Cr(III) onto C‐4‐Methoxyphenylcalix[4]Resorcinarene in Batch and Fixed Bed Column Systems

A study on the adsorption characteristics of Pb(II) and Cr(III) cations onto C‐4‐methoxyphenylcalix‐[4]resorcinarene (CMPCR) in batch and fixed bed column systems has been conducted. CMPCR was produced by one step synthesis from resorcinol, 4‐methoxybenzaldehyde, and HCl. The synthesis was carried out at 78 °C for 24 hours and afforded the adsorbent in 85.7% as a 3:2 mixture of C_4ν:C_2ν isomer. Most parameters in batch and fixed bed column systems confirm that CMPCR is a good adsorbent for Pb(II) and Cr(III), though Pb(II) adsorption was more favorable than that of Cr(III). The adsorption kinetic of Pb(II) and Cr(III) adsorptions in batch and fixed bed column systems followed a pseudo 2ⁿ order kinetics model. The rate constant of Pb(II) was higher than that of Cr(III) in the batch system, but this result was contrary to the result obtained in a fixed bed column system. Desorption studies to recover the adsorbed Pb(II) and Cr(III) were performed sequentially with distilled water and HCl, and the results showed that the adsorption was dominated by chemisorption.     

Strategy for developing and optimizing liquid chromatography methods in pharmaceutical development using computer-assisted screening and Plackett-Burman experimental design

We describe a three-step method development/optimization strategy for HPLC assay/impurity methods for pharmaceuticals, which include multiple-column/mobile phase screening using a system equipped with a column-switching device, further optimization of separation by using multiple organic modifiers in the mobile phase, and multiple-factor method optimization using Plackett-Burman experimental designs. In the first two steps, commercially available chromatography optimization software, DryLab, was used to perform computer simulations. This allows the method developer to evaluate each condition (one column/mobile phase combination) with retention data from two scouting gradient runs. This approach significantly reduces the number of runs in method development. After a satisfactory separation was obtained, we used a method optimization step with Plackett-Burman experimental designs. The purpose of the 16-injection set experiments was to evaluate nine method factors with regard to method precision, accuracy, sensitivity and specificity. The results provided logical justifications in selecting method parameters such as column temperature, detection wavelength, injection volume, and sample solvent, etc. In data analysis, instead of the traditional mathematical manipulations, we used the graphical methods to examine and present data by creating the so-called main effect plots. Because replicates of design points were not run, the data did not allow the testing of statistical significance. However, it provided visual presentations in a way that is easy to understand for the method developer and end user alike.     

Investigation of the validity of the kinetic plot method to predict the performance of coupled column systems operated at very high pressures under different thermal conditions

The present study investigates how strong the kinetic plot method is influenced by the changes in plate height, retention factor and apparent column permeability that arise under conditions of very high pressure. More precisely, the study investigates how well a set of performance measurements conducted on a single short column can be used to predict the performance of a long sequence of coupled columns. This has been investigated for the two practically most relevant thermal conditions, i.e., that of a forced-air oven and that of a still-air oven. Measuring column performance data for acetophenone and benzene on a series of coupled 3.5 μm columns that could be operated up to 1000 bar, it was found that the kinetic plot method provides accurate predictions of time versus efficiency for the still-air oven systems, over the entire range of investigated pressures and column lengths (up to 60 cm), provided k′ and K_v0 are evaluated at the maximal pressure. For the forced-air oven which leads to worse performances than the still-air oven, the kinetic plot prediction is less accurate, partly because the thermal conditions (near-isothermal) tend to vary if the number of coupled columns increases. The fact that the thermal conditions of the column wall might vary with the column length is an additional complexity making very-high pressure separations less predictable and harder to interpret and model.     

Computer-assisted optimization of selectivity by tuning temperature and carrier gas pressure drop in two GC capillary columns coupled in series

The paper shows a computer-assisted procedure for the optimization of selectivity of two columns coupled in series by tuning the working temperature (using the isothermal mode) and columns coupling-point pressure at constant inlet and outlet carrier gas pressures. The optimization procedure validation was tested by the separation of 32 hydrocarbons in a column series with the aim to resolve the maximum number of components in the shortest possible analysis time.Dedicated to Professor J. F. K. Huber on the occasion of his 65th birthday     

On-column ligand synthesis coupled to partial-filling affinity capillary electrophoresis to estimate binding constants of ligands to a receptor

This paper describes a two-step procedure whereby on-column ligand synthesis and partial-filling affinity capillary electrophoresis (PFACE) are sequentially coupled to each other to determine the binding constants of 9-fluorenylmethoxy carbonyl (Fmoc)-amino acid-D-Ala-D-Ala species to vancomycin (Van) from Streptomyces orientalis. In this technique four separate plugs of sample are injected onto the capillary column and electrophoresed. The initial sample plug contains a D-Ala-D-Ala terminus peptide and two non-interacting standards. Plugs two and three contain solutions of Fmoc-amino acid-N-hydroxysuccinimide (NHS) ester and running buffer, respectively. The fourth sample plug contains an increasing concentration of Van partially-filled onto the capillary column. Upon electrophoresis the initial D-Ala-D-Ala peptide reacts with the Fmoc-amino acid NHS ester yielding the Fmoc-amino acid D-Ala-D-Ala peptide. Continued electrophoresis results in the overlap of the plugs of Van and Fmoc-amino acid-D-Ala-D-Ala peptide and non-interacting markers. Analysis of the change in the relative migration time ratio of the Fmoc-amino acid-D-Ala-D-Ala peptide relative to the non-interacting standards, as a function of the concentration of Van, yields a value for the binding constant. These values agree well with those estimated using other binding and ACE techniques.