含糖基水溶性紫外吸收剂的合成与表征

以三聚氯氰(TCT)、2,4-二羟基二苯甲酮(UV-0)、双丙酮葡萄糖为原料,经三步反应合成一种具有反应性基团的水溶性紫外吸收剂3-(2-(2-羟基苯基苯甲酮-4-氧基)-4-氯-1,3,5-三嗪-6-氧基)-1,2-异丙叉-α-D-葡萄糖(UV-DTM),产物的结构经IR、NMR和MS表征。探讨了每一步反应的条件对反应产率的影响。合成3-(4,6-二氯-1,3,5-三嗪-2-氧基)-1,2,5,6-双异丙叉-α-D-葡萄糖(DTDT)的优化反应条件为:n(三聚氯氰)∶n(双丙酮葡萄糖)∶n(Na OH)=0.9∶1∶1.7,在丙酮和水的混合体系中0℃下反应8h,产率73%。合成3-(2-(2-羟基苯基苯甲酮-4-氧基)-4-氯-1,3,5-三嗪-6-氧基)-1,2,5,6双异丙叉-α-D-葡萄糖(UV-DT)的优化条件为:n(DTDT)∶n(UV-0)∶n(Na OH)=1∶1.1∶1,在丙酮和水的混合体系中30℃下反应2h,产率74%。合成UV-DTM的优化条件为:每1mmol UV-DT与0.5m L盐酸(36%)在THF体系中25℃下反应5h,产率74%。UV-DTM的紫外吸收性能在240~400 nm内表现良好,水溶性得到大幅改善。     

1，3-二羟基丙酮衍生物的合成

以五氧化二磷为引发剂，二甲亚砜氧化1，3-二芳氧基(烷氧基)-2-丙醇化合物合成了一系列1，3-二羟基丙酮衍生物．通过IR和^H NMR对化合物进行了表征．     

新型含咪唑啉2,4-二酮的(硫代)磷酸酯类化合物的合成和生物活性测定

以对羟基苯基和对羟基苄基咪唑啉2,4-二酮羧酸酯类化合物为二次先导结构,根据Hydantocidin在植物体内的作用形式是Hydantocidin 5’-Phosphate的特点,将3种对羟基苯(苄基)-2,4-咪唑啉二酮中间体与(硫代)磷酰氯反应合成得到了38个结构新颖的含有2,4-咪唑啉二酮的(硫代)磷酸酯类化合物,其结构通过IR,1H NMR,31P NMR和元素分析表征.初步生物测定结果表明O-乙基-O-苯基-5-(4-羟基苯基)-2,4-咪唑啉二酮硫代磷酸酯(B14)和O,O-二苯基-5-(4-羟基苄基)-2-硫代-4-咪唑啉二酮硫代磷酸酯(B25)在100μg/mL浓度下对油菜的抑制率为53.1%和62.7%,化合物O,O-二(邻甲氧基苯基)-5-(4-羟基苯基)-2,4-咪唑啉二酮硫代磷酸酯(B7),B14和O,O-二(对甲基苯基)-5-(4-羟基苄基)-2,4-咪唑啉二酮硫代磷酸酯(B17)对蚜虫表现了一定的杀虫活性,在300μg/mL浓度下24 h的校正死亡率分别为52%,51%和69%.     

纳米片层Sn-Beta分子筛催化1,3-二羟基丙酮制备乳酸甲酯的研究

乳酸及其衍生物是一类非常重要的有机化工中间品,其作为一种生物质能市场潜力巨大,因此为其寻找一条更加绿色、高效的生产路线具有重要意义。本文通过预制备的分子筛导向剂和表面活性剂在水热条件下合成分子筛前体,而后经酸处理和干法浸渍引入活性金属中心,从而制成一种具有独特的“花瓣”状纳米片层结构的Sn-Beta分子筛(Sn-Beta-NS)。SnBeta-NS在以1,3-二羟基丙酮为原料制备乳酸甲酯的反应中,在接近室温(40℃)的条件下即可催化取得优异的催化活性：仅5h 1,3-二羟基丙酮转化率可达98%,乳酸甲酯的收率就可达94%,其选择性可达96%。该催化剂性能明显优于传统水热合成的Sn-Beta分子筛。Sn-BetaNS还具有优异的循环性能：经4次循环使用后,收率和转化率均下降小于1%,没有出现明显的失活现象。这些优异的催化性能和循环性能的原因正是由于该分子筛独特的的纳米片层结构。     

1,3-二羟基丙酮衍生物的合成

以五氧化二磷为引发剂 ,二甲亚砜氧化 1,3 二芳氧基 (烷氧基 ) 2 丙醇化合物合成了一系列 1,3 二羟基丙酮衍生物 .通过IR和1HNMR对化合物进行了表征     

气相色谱法测定纺织品中的三种有机磷阻燃剂

建立了超声萃取-毛细管气相色谱-氮磷检测器测定纺织品中3种有机磷阻燃剂的方法。正交试验确定超声萃取的优化条件为萃取溶剂丙酮和正己烷的体积比为2∶8,萃取时间为40 min,溶剂体积为35 mL。实验结果表明,三(2-氯乙基)磷酸酯、三邻甲苯基磷酸酯和三(2,3-二溴丙基)磷酸酯等3种化合物的线性范围分别为0.3758～36.38 mg/L、0.3841～38.41 mg/L和15.78～1010 mg/L,检测限依次为0.044,0.053和0.82 mg/kg。对于上述3种化合物,方法的精密度分别为6.2%,7.7%和6.5%,方法的回收率介于83.2%和115.4%之间。     

Bi-Pt催化剂在H-mordenite载体上的甘油选择性氧化

以Bi-Pt/H-mordenite为催化剂,对甘油(GLY, Glycerol)选择性氧化制备二羟基丙酮(DHA, Dihydroxyacetone)进行了研究。采用BET对催化剂进行表征,结果表明,催化剂的比表面积对催化剂的反应性能影响较小。甘油的裂解是主要的副反应,而H-mordenite可以抑制甘油的裂解,提高DHA的选择性。最佳反应条件为温度353 K,反应时间2~4 h,空气流量20 mL/min,甘油(水-乙醇1:1混合溶液的质量分数为10%),催化剂为1%Bi-5%Pt/H-mordenite时,甘油的转化率为70.6%,DHA的选择性为61.0%。     

O,O′-二(2-氯乙基)-O″-[2-二(2-氯乙氧基)磷酰丙基]磷酸酯的合成

报道了以三氯化磷、乙二醇、环氧乙烷、丙酮和氯气等原料合成新型阻燃剂O,O′-二(2-氯乙基)-O″-[2-二(2-氯乙氧基)磷酰丙基]磷酸酯的方法.探讨了反应温度、催化剂以及反应时间等条件对各步反应的影响,产品总收率92%以上.采用元素分析、红外光谱和核磁共振等表征了合成化合物的结构.     

铜基催化剂上甘油脱水制备羟基丙酮

采用共沉淀法制备了一系列铜基催化剂,在N2中于高压釜中,考察了其催化甘油脱水制备羟基丙酮的反应性能.结果表明,Cu/SiO2催化剂具有较高的催化甘油脱水活性,但目的产物羟基丙酮易与反应产生的H2生成1,2-丙二醇,使得羟基丙酮选择性不高.因此,在固定床反应器上详细考察了在优选的Cu/SiO2催化剂上反应气氛、温度和空速...     

5-叔丁基-5-(1'-羟基-2'-甲基丙基)-2,2-二甲基-1,3-二氧六环的合成研究

为得到3,4-二取代双环硫化磷酸酯的中间体5-叔丁基-5-(1'-羟基-2'-甲基丙基)-2,2-二甲基-1,3-二氧六环, 通过5-叔丁基-5-甲酰基-2,2-二甲基-1,3-二氧六环与异丙基溴化镁反应没有得到目标化合物, 而得到了还原产物, 改用异丙基锂代替异丙基溴化镁反应后得到目标化合物, 通过超声波辅助反应, 大幅度提高了反应收率.     

Synthesis and hydrolytic degradation of aliphatic polycarbonate based on dihydroxyacetone

The six-membered cyclic carbonate monomer, 2,2-dimethoxy-1,3-propanediol carbonate based on dihydroxyacetone with methanol ketal protected carbonyl group, was prepared by a two-step reaction including protection and ring-closing, starting from dihydroxyacetone. The ring-opening polymerization of 2,2-dimethoxy-1,3-propanediol carbonate was carried out in bulk at 110–140°C initiated by stannous octanoate to give polycarbonate, poly(2,2-dimethoxypropane-1,3-diol carbonate). The effects of different reaction conditions including different catalyst, reaction temperature, molar ratio of monomer to initiator and polymerization time on the polymerization were investigated. Polycarbonate was obtained with the yield of 58.9–91.0%. The number average molecular weight of polycarbonate was in the range of 1.43 × 10⁴ to 13.82 × 10⁴ with polydispersity indexes from 1.31 to 1.91. The protecting ketal group was partly removed by hydrolysis using 50% trifluroacetic acid as a catalyst to give a functional polycarbonate containing 70% ketone carbonyl group, which improved the hydrophilicity of initial polycarbonate. The in vitro degradation tests were carried out in a phosphate buffer solution with pH 7.4 at 37°C, which showed that the modified polycarbonate degraded completely after 5 days.     

Straightforward chemo-enzymatic synthesis of new aminocyclitols,analogues of valiolamine and their evaluation as glycosidase inhibitors

An efficient fructose-1,6-bisphosphate aldolase mediated synthesis of new aminocyclitol analogues of valiolamine is described. The one-pot process where four stereocentres are created involves the formation of two carbon–carbon bonds. One is catalysed by the aldolase, coupling dihydroxyacetone phosphate to nitrobutyraldehydes. The other is the result of a highly stereoselective intramolecular Henry reaction occurring on the intermediate nitroketones. Depending on the configuration of the hydroxyl which is α to the nitro group, two series of configuration are accessible. The lipase resolution of the nitroalcohol ketal, precursor of the nitroaldehyde, is presented. The inhibition properties of the aminocyclitols obtained after the reduction of the nitro group are evaluated towards five commercial glycosidases.     

One-pot synthesis of L-Fructose using coupled multienzyme systems based on rhamnulose-1-phosphate aldolase

Two methods have been developed for the highly efficient enzymatic synthesis of L-fructose: one is based on rhamnulose-1-phosphate aldolase and acid phosphatase using racemic glyceraldehyde and dihydroxyacetone phosphate as substrates; the other is to generate enantiomerically pure L-glyceraldehyde in situ from glycerol for the aldol reaction, using galactose oxidase catalyzed oxidation of glycerol in the presence of catalase. Using this four-enzyme system, enantiomerically pure L-fructose was obtained. Using the more expensive dihydroxyacetone phosphate, the yield was 55% after purification.     

Selective synthesis of erythrulose and 3-pentulose from formaldehyde and dihydroxyacetone catalyzed by phosphates in a neutral aqueous medium

The aldol condensation of formaldehyde and the lower carbohydrate dihydroxyacetone in a neutral aqueous medium is effectively catalyzed by solid compounds (hydroxylapatite and calcium phosphate and carbonate), natural minerals (apatite and vivianite), and soluble phosphates. In excess formaldehyde, the decrease in the concentration of the lower carbohydrate is described by a first-order rate law with respect to dihydroxyacetone. The major products of the reaction between formaldehyde and dihydroxyacetone in the presence of the above catalysts are erythrulose (45–50% selectivity) and 3-pentulose (35–40% selectivity). Branched pentulose and hexulose are also identified among the reaction products.     

Gram scale synthesis of 3-fluoro-1-hydroxyacetone phosphate: a novel donor substrate in rabbit muscle aldolase-catalyzed aldol reactions

An efficient gram scale synthesis of 3-fluoro-1-hydroxyacetone phosphate (FHAP) has been developed. As a close analog to dihydroxyacetone phosphate, FHAP was used as a novel donor substrate for rabbit muscle aldolase catalyzed reactions. The different binding affinities of the gem-diol and keto form of FHAP were studied by (19)F-NMR.     

Lewis acid mediated regioselective ring opening of benzylglycidol with dibenzyl phosphate: Short and attractive synthesis of dihydroxyacetone phosphate

A novel, mild, and efficient method was described to introduce a dibenzyl phosphate by ring opening of benzylglycidol mediated by Lewis acids. This methodology was used as a key step for synthesizing the dihydroxyacetone phosphate (DHAP) in only three steps with an overall yield of 74% from the commercially available racemic benzylglycidol.     

A Modified Enzymatic Method for the Estimation of Dihydroxyacetone

Abstract

A two stage assay procedure has been developed for the estimation of dihydroxyacetone (DHN). DHA is at first phosphorylated to dihydroxyacetone phosphate (DHAP) by glycerokinase (GK) and ATP at pH 8.5. The DHAP formed is then measured enzymatically using glycerol-3P dehydrogenase (GDH) and NADH at pH 7.6. The sensitivity of this method is found to be adequate for both routine assays and kinetic studies.     

pH‐ and Thiol‐Responsive BODIPY‐Based Photosensitizers for Targeted Photodynamic Therapy

A diiodo distyryl boron dipyrromethene (BODIPY) core was conjugated to two ferrocenyl quenchers through acid‐labile ketal and/or thiol‐cleavable disulfide linkers, of which the fluorescence and photosensitizing properties were significantly quenched through a photoinduced electron‐transfer process. The two symmetrical analogues that contained either the ketal or disulfide linkers could only be activated by a single stimulus, whereas the unsymmetrical analogue was responsive to dual stimuli. Upon interaction with acid and/or dithiothreitol (DTT), these linkers were cleaved selectively. The separation of the BODIPY core and the ferrocenyl moieties restored the photoactivities of the former in phosphate buffered saline and inside the MCF‐7 breast cancer cells, rendering these compounds as potential activable photosensitizers for targeted photodynamic therapy. The dual activable analogue exhibited the greatest enhancement in intracellular fluorescence intensity in both an acidic environment (pH 5) and the presence of DTT (4 mm ). Its photocytotoxicity against MCF‐7 cells also increased by about twofold upon preincubation with 4 mm of DTT. The activation of this compound was also demonstrated in nude mice bearing a HT29 human colorectal carcinoma. A significant increase in fluorescence intensity in the tumor was observed over 9 h after intratumoral injection.     

5-enolpyruvylshikimate 3-phosphate synthase: chemical synthesis of the tetrahedral intermediate and assignment of the stereochemical course of the enzymatic reaction

A chemical synthesis of both diastereomers of the tetrahedral intermediate involved in 5-enolpyruvylshikimate 3-phosphate synthase (EPSPS) catalysis has been accomplished. Combination of methyl dibromopyruvate with a protected shikimic acid derivative, phosphorylation, and lactonization afforded the intermediates (S)-15 and (R)-15, whose configurations were assigned by NMR. After introduction of the 3-phosphate group and deprotection, photoinitiated radical debromination of the dibromo analogues (S)-5 and (R)-5 was accomplished with tributyltin hydride in mixed aqueous solvents in the presence of surfactant to give the pyruvate ketal phosphates (R)-TI and (S)-TI, respectively. These compounds are stable at high pH, but decompose at pH 7 with a half-life of ca. 10 min. (R)-TI proved to be inert to EPSPS, while (S)-TI was converted by the enzyme to a mixture of 5-enolpyruvylshikimate 3-phosphate, shikimate 3-phosphate, and phosphoenolpyruvate. The demonstration that the enzymatic intermediate possesses the S-configuration at the ketal center confirms the mechanism as an anti addition followed by a syn elimination. Furthermore, it appears that the syn stereochemistry of the second step requires the phosphate leaving group to serve as the base in catalyzing its own elimination.     

Class I fructose-1,6-bisphosphate aldolases as catalysts for asymmetric aldol reactions

The activity of two commercially available bacterial class I fructose-1,6-bisphosphate aldolases (FruA) towards a number of aldehydes has been compared with rabbit muscle aldolase (RAMA), which is the most widely used enzyme for aldol reactions with dihydroxyacetone phosphate. The kinetic properties of the three aldolases are very similar, but the bacterial aldolases were much more stable than RAMA. Reaction of butanal and dihydroxyacetone phosphate catalyzed by FruA from Staphylococcus carnosus was performed on a 5 mmol scale in 53% isolated yield. Enantiomeric and diastereomeric purity of the major reaction product [90% (3S,4R)] was determined by chiral gas chromatography.