Effects of solvent on the relative stability of mono and di-aluminium aryloxide complexes of bipyridines: anomalous behavior of [(tBu)2Al(OPh)]2(mu-4,4-bipy)

The temperature dependence of the solution equilibrium constants for [((t)Bu)(2)Al(OPh)]2(mu-4,4'-bipy)(1a), [((t)Bu)2Al(OPh)](2)(mu-bipetha)(2a, bipetha = 1,2-bis(4-pyridyl)ethane), and [((t)Bu)(2)Al(OPh)]2(mu-bipethe)(3a, bipethe =trans-1,2-bis(4-pyridyl)ethylene) in C6D6 and CDCl(3) allow for the determination of DeltaH and DeltaS for the dissociation of one Al(tBu)2OPh moiety from the bridging ligand, i.e., 2[(tBu)2AL(OPh)]2(mu-L)<==>(K1)2AL(OPh)(tBu)2(L)+[(tBu)2Al(mu-OPh)]2. For compounds and the DeltaH values in C6D6[99(2) kJ mol(-1)(2a) and 109(5) kJ mol(-1)(3a)] and CDCl3[115(5) kJ mol(-1)(2a) and 139(7) kJ mol(-1)(3a)] were found to be inversely proportional with the dielectric constant of the solvent. In contrast, the DeltaH value for 1a in CDCl3 is surprisingly small [14.9(7) kJ mol(-1)] and does not fit with the trends adopted by the bipetha and bipethe derivatives or the value obtained in C6D6[110(2) kJ mol(-1)]. Unlike the other compounds and the C6D6 solutions, the CDCl3 solution of 1a allows for the observation of a second equilibrium 2Al(OPh)(tBu)2(L)<==>(K2)[(tBu)2Al(mu-OPh)]2+2L, for which the DeltaH has been determined [4.5(3) kJ mol(-1)]. This result suggests that in CDCl3 bonding of the second Al(tBu)2OPh moiety to Al(OPh)(tBu)2(4,4'-bipy)(1b) is stabilized by the presence of the first aluminium, which is counter to ab initio calculations that predicts the aluminium in Al(OPh)((t)Bu)2(L) should destabilize the Al-N interaction with a second Al(tBu)2OPh group. The BDE for dissociation of both Al(tBu)2OPh moieties from 1a-3a, and the energy of formation of hydrogen bond interactions with CHCl3, has been calculated by ab initio methods, and no unusual effects are inherent in 1a.     

Pt(II) and Pt(IV) amido, aryloxide, and hydrocarbyl complexes: synthesis, characterization, and reaction with dihydrogen and substrates that possess C-H bonds

The Pt(II) amido and phenoxide complexes ((t)bpy)Pt(Me)(X), ((t)bpy)Pt(X)(2), and [((t)bpy)Pt(X)(py)][BAr'(4)] (X = NHPh, OPh; py = pyridine) have been synthesized and characterized. To test the feasibility of accessing Pt(IV) complexes by oxidizing their Pt(II) precursors, the previously reported ((t)bpy)Pt(R)(2) (R = Me and Ph) systems were oxidized with I(2) to yield ((t)bpy)Pt(R)(2)(I)(2). The analogous reaction with ((t)bpy)Pt(Me)(NHPh) and MeI yields the corresponding ((t)bpy)Pt(Me)(2)(NHPh)(I) complex. Reaction of ((t)bpy)Pt(Me)(NHPh) and phenylacetylene at 80 °C results in the formation of the Pt(II) phenylacetylide complex ((t)bpy)Pt(Me)(C≡CPh). Kinetic studies indicate that the reaction of ((t)bpy)Pt(Me)(NHPh) and phenylacetylene occurs via a pathway that involves [((t)bpy)Pt(Me)(NH(2)Ph)][TFA] as a catalyst. The reaction of H(2) with ((t)bpy)Pt(Me)(NHPh) ultimately produces aniline, methane, (t)bpy, and elemental Pt. For this reaction, mechanistic studies reveal that 1,2-addition of dihydrogen across the Pt-NHPh bond to initially produce ((t)bpy)Pt(Me)(H) and free aniline is catalyzed by elemental Pt. Heating the cationic complexes [((t)bpy)Pt(NHPh)(py)][BAr'(4)] and [((t)bpy)Pt(OPh)(py)][BAr'(4)] in C(6)D(6) does not result in the production of aniline and phenol, respectively. Attempted synthesis of a cationic system analogous to [((t)bpy)Pt(NHPh)(py)][BAr'(4)] with ligands that are more labile than pyridine (e.g., NC(5)F(5)) results in the formation of the dimer [((t)bpy)Pt(μ-NHPh)](2)[BAr'(4)](2). Solid-state X-ray diffraction studies of the complexes ((t)bpy)Pt(Me)(NHPh), [((t)bpy)Pt(NH(2)Ph)(2)][OTf](2), ((t)bpy)Pt(NHPh)(2), ((t)bpy)Pt(OPh)(2), ((t)bpy)Pt(Me)(2)(I)(2), and ((t)bpy)Pt(Ph)(2)(I)(2) are reported.     

1,4-dioxobenzene compounds of gallium: reversible binding of pyridines to [[((t)Bu)(2)Ga](2)(mu-OC(6)H(4)O)](n) in the solid state

The gallium aryloxide polymer, [[((t)Bu)(2)Ga](2)(mu-OC(6)H(4)O)](n)(1) is synthesized by the addition of Ga((t)()Bu)(3) with hydroquinone in a noncoordinating solvent, and reacts with pyridines to yield the yellow compound [((t)()Bu)(2)Ga(L)](2)(mu-OC(6)H(4)O) [L = py (2), 4-Mepy (3), and 3,5-Me(2)py (4)] via cleavage of the Ga(2)O(2) dimeric core. The analogous formation of Ga((t)()Bu)(2)(OPh)(py) (5) occurs by dissolution of [((t)Bu)(2)Ga(mu-OPh)](2) in pyridine. In solution, 2-4 undergo dissociation of one of the pyridine ligands to yield [((t)()Bu)(2)Ga(L)(mu-OC(6)H(4)O)Ga((t)Bu)(2)](2), for which the DeltaH and DeltaS have been determined. Thermolysis of compounds 2-4 in the solid-state results in the loss of the Lewis base and the formation of 1. The reaction of 1 or [((t)Bu)(2)Ga(mu-OPh)](2) with the vapor of the appropriate ligand results in the solid state formation of 2-4 or 5, respectively. The deltaH and deltaS for both ligand dissociation and association for the solid-vapor reactions have been determined. The interconversion of 1 into 2-4, as well as [((t)Bu)(2)Ga(mu-OPh)](2) into 5, and their reverse reactions, have been followed by (13)C CPMAS NMR spectroscopy, TG/DTA, SEM, EDX, and powder XRD. Insight into this solid-state polycondensation polymerization reaction may be gained from the single-crystal X-ray crystallographic packing diagrams of 2-5. The crystal packing for compounds 2, 3, and 5 involve a head-to-head arrangement that is maintained through repeated ligand dissociation and association cycles. In contrast, when compound 4 is crystallized from solution a head-to-tail packing arrangement is formed, but during reintroduction of 3,5-Me(2)py in the solid state-vapor reaction of compound 1, a head-to-head polymorph is postulated to account for the alteration in the deltaH of subsequent ligand dissociation reactions. Thus, the deltaH for the condensation polymerization reaction is dependent on the crystal packing; however, the subsequent reversibility of the reaction is dependent on the polymorph.     

Synthesis and structures of aluminum and magnesium complexes of tetraimidophosphates and trisamidothiophosphates: EPR and DFT investigations of the persistent neutral radicals {Me2Al[(mu-NR)(mu-NtBu)P(mu-NtBu)2]Li(THF)2}(*) (R = SiMe3, tBu)

Reactions of (RNH)(3)PNSiMe(3) (3a, R = (t)()Bu; 3b, R = Cy) with trimethylaluminum result in the formation of {Me(2)Al(mu-N(t)Bu)(mu-NSiMe(3))P(NH(t)()Bu)(2)]} (4) and the dimeric trisimidometaphosphate {Me(2)Al[(mu-NCy)(mu-NSiMe(3))P(mu-NCy)(2)P(mu-NCy)(mu-NSiMe(3))]AlMe(2)} (5a), respectively. The reaction of SP(NH(t)Bu)(3) (2a) with 1 or 2 equiv of AlMe(3) yields {Me(2)Al[(mu-S)(mu-N(t)Bu)P(NH(t)()Bu)(2)]} (7) and {Me(2)Al[(mu-S)(mu-N(t)()Bu)P(mu-NH(t)Bu)(mu-N(t)Bu)]AlMe(2)} (8), respectively. Metalation of 4 with (n)()BuLi produces the heterobimetallic species {Me(2)Al[(mu-N(t)Bu)(mu-NSiMe(3))P(mu-NH(t)()Bu)(mu-N(t)()Bu)]Li(THF)(2)} (9a) and {[Me(2)Al][Li](2)[P(N(t)Bu)(3)(NSiMe(3))]} (10) sequentially; in THF solutions, solvation of 10 yields an ion pair containing a spirocyclic tetraimidophosphate monoanion. Similarly, the reaction of ((t)BuNH)(3)PN(t)()Bu with AlMe(3) followed by 2 equiv of (n)BuLi generates {Me(2)Al[(mu-N(t)Bu)(2)P(mu(2)-N(t)Bu)(2)(mu(2)-THF)[Li(THF)](2)} (11a). Stoichiometric oxidations of 10 and 11a with iodine yield the neutral spirocyclic radicals {Me(2)Al[(mu-NR)(mu-N(t)Bu)P(mu-N(t)Bu)(2)]Li(THF)(2)}(*) (13a, R = SiMe(3); 14a, R = (t)Bu), which have been characterized by electron paramagnetic resonance spectroscopy. Density functional theory calculations confirm the retention of the spirocyclic structure and indicate that the spin density in these radicals is concentrated on the nitrogen atoms of the PN(2)Li ring. When 3a or 3b is treated with 0.5 equiv of dibutylmagnesium, the complexes {Mg[(mu-N(t)()Bu)(mu-NH(t)()Bu)P(NH(t)Bu)(NSiMe(3))](2)} (15) and {Mg[(mu-NCy)(mu-NSiMe(3))P(NHCy)(2)](2)} (16) are obtained, respectively. The addition of 0.5 equiv of MgBu(2) to 2a results in the formation of {Mg[(mu-S)(mu-N(t)()Bu)P(NH(t)Bu)(2)](2)} (17), which produces the hexameric species {[MgOH][(mu-S)(mu-N(t)()Bu)P(NH(t)Bu)(2)]}(6) (18) upon hydrolysis. Compounds 4, 5a, 7-11a, and 15-17 have been characterized by multinuclear ((1)H, (13)C, and (31)P) NMR spectroscopy and, in the case of 5a, 9a.2THF, 11a, and 18, by X-ray crystallography.     

Cationic aluminum alkyl complexes incorporating aminotroponiminate ligands

The synthesis, structures, and reactivity of cationic aluminum complexes containing the N,N'-diisopropylaminotroponiminate ligand ((i)Pr(2)-ATI(-)) are described. The reaction of ((i)Pr(2)-ATI)AlR(2) (1a-e,g,h; R = H (a), Me (b), Et (c), Pr (d), (i)Bu (e), Cy (g), CH(2)Ph (h)) with [Ph(3)C][B(C(6)F(5))(4)] yields ((i)()Pr(2)-ATI)AlR(+) species whose fate depends on the properties of the R ligand. 1a and 1b react with 0.5 equiv of [Ph(3)C][B(C(6)F(5))(4)] to produce dinuclear monocationic complexes [([(i)Pr(2)-ATI] AlR)(2)(mu-R)][(C(6)F(5))(4)] (2a,b). The cation of 2b contains two ((i)()Pr(2)-ATI)AlMe(+) units linked by an almost linear Al-Me-Al bridge; 2a is presumed to have an analogous structure. 2b does not react further with [Ph(3)C][B(C(6)F(5))(4)]. However, 1a reacts with 1 equiv of [Ph(3)C][B(C(6)F(5))(4)] to afford ((i Pr(2)-ATI)Al(C(6)F(5))(mu-H)(2)B(C(6)F(5))(2) (3) and other products, presumably via C(6)F(5)(-) transfer and ligand redistribution of a [((i)()Pr(2)-ATI)AlH][(C(6)F(5))(4)] intermediate. 1c-e react with 1 equiv of [Ph(3)C][B(C(6)F(5))(4)] to yield stable base-free [((i)Pr(2)-ATI)AlR][B(C(6)F(5))(4)] complexes (4c-e). 4c crystallizes from chlorobenzene as 4c(ClPh).0.5PhCl, which has been characterized by X-ray crystallography. In the solid state the PhCl ligand of 4c(ClPh) is coordinated by a dative PhCl-Al bond and an ATI/Ph pi-stacking interaction. 1g,h react with [Ph(3)C][B(C(6)F(5))(4)] to yield ((i)Pr(2)-ATI)Al(R)(C(6)F(5)) (5g,h) via C(6)F(5)(-) transfer of [((i)Pr(2)-ATI)AlR][(BC(6)F(5))(4)] intermediates. 1c,h react with B(C(6)F(5))(3) to yield ((i)Pr(2)-ATI)Al(R)(C(6)F(5)) (5c,h) via C(6)F(5)(-) transfer of [((i)Pr(2)-ATI)AlR][RB(C(6)F(5))(3)] intermediates. The reaction of 4c-e with MeCN or acetone yields [((i)Pr(2)-ATI)Al(R)(L)][B(C(6)F(5))(4)] adducts (L = MeCN (8c-e), acetone (9c-e)), which undergo associative intermolecular L exchange. 9c-e undergo slow beta-H transfer to afford the dinuclear dicationic alkoxide complex [(((i)Pr(2)-ATI)Al(mu-O(i)()Pr))(2)][B(C(6)F(5))(4)](2) (10) and the corresponding olefin. 4c-e catalyze the head-to-tail dimerization of tert-butyl acetylene by an insertion/sigma-bond metathesis mechanism involving [((i)Pr(2)-ATI)Al(C=C(t)Bu)][B(C(6)F(5))(4)] (13) and [((i)Pr(2)-ATI)Al(CH=C((t)()Bu)C=C(t)Bu)][B(C(6)F(5))(4)] (14) intermediates. 13 crystallizes as the dinuclear dicationic complex [([(i Pr(2)-ATI]Al(mu-C=C(t)Bu))(2)][B(C(6)F(5))(4)](2).5PhCl from chlorobenzene. 4e catalyzes the polymerization of propylene oxide and 2a catalyzes the polymerization of methyl methacrylate. 4c,e react with ethylene-d(4) by beta-H transfer to yield [((i)Pr(2)-ATI)AlCD(2)CD(2)H][B(C(6)F(5))(4)] initially. Polyethylene is also produced in these reactions by an unidentified active species.     

3,5-Dimethyl and 3,5-di-tert-butylpyrazolato complexes with alkali metals: monomeric, dimeric, cluster, and 1D chain structures

The pyrazolato complexes [(Me(2)pz)(THF)Li] (1), [((t)Bu(2)pz)Li](4) (2), [((t)Bu(2)pzH)((t)()Bu(2)pz)Li](2) (2a), [(Me(2)pz)Na] (3), [((t)Bu(2)pz)Na](4), [((t)Bu(2)pz)(6)(OH)Na(7)] (4a), [((t)Bu(2)pz)(18-crown-6)Na] (4b), and [((t)Bu(2)pz)K] (5) were synthesized by metalation reactions between R(2)pzH (R = Me, (t)()Bu) and alkyllithium, elemental sodium, or potassium. All the complexes were characterized by spectroscopic methods and microanalysis, and in addition, the crystal structures of 2, 2a, 3, 4a, 4b, and 5 were obtained by single-crystal X-ray diffraction. They show monomeric, dimeric, cluster, and 1D chain structures in the solid state. Ab initio calculations on the structure and stabilities of the monomeric pzM complexes were performed at the MP2 level of theory showing good agreement with the coordination preferences of the pyrazolato ligand to a particular alkali ion.     

Formation of N-I charge-transfer bonds and ion pairs in polyiodides with imidotellurium cations

[((t)BuNH)Te(mu-N(t)Bu)(2)Te(N(t))Bu)][OSO(2)CF(3)] (4a) is obtained in quantitative yields by the treatment of [((t)BuN)Te(mu-N(t)Bu)(2)Te(N(t)Bu)] (1) with HCF(3)SO(3). The reaction of 4a with LiI and iodine in the molar ratio 1:1:4.5 affords a product that, upon recrystallization from acetonitrile, was found to be a solid solution of [((t)BuNH)Te(mu-N(t)Bu)(2)Te(N(t)Bu)](2)I(20) (5a) and [((t)BuNH)Te(mu-N(t)Bu)(2)Te(NH(t)Bu)](2)I(18) (5b). Consequently, the crystal structure is disordered, containing 88.3(1)% of 5a.2MeCN and 11.7(1)% of 5b.2MeCN. The I(20) framework is involved in two symmetry-equivalent N-I-I-I-I fragments, two I(3)(-) ions, and three I(2) molecules that are linked together by I...I secondary bonding interactions. The bonding in the N-I-I-I-I fragment can be considered in terms of the lp(N) --> sigma*(I(2)) and pi(I(2)) --> sigma*(I(2)) charge-transfer interactions involving one [((t)BuNH)Te(mu-N(t)Bu)(2)Te(N(t)Bu)](+) cation and two I(2) units. The N-I bond length of 2.131(7) A, the I-I distances of 3.118(1), 3.095(2), and 2.788(2) A, and the angle I(2)-I(2) angle of 84.75(4) degrees are consistent with this bonding scheme. The I-I bond distances in the two symmetry-equivalent I(3)(-) ions are 3.113(1) and 2.792(2) A, and those in two crystallographically independent I(2) molecules are 2.736(2) and 2.743(1) A. The formal I(18)(4)(-) anion in 5b.2MeCN consists of four I(3)(-) anions and three I(2) molecules linked by I...I secondary bonds. One crystallographically independent I(3)(-) anion is connected to the [((t)BuNH)Te(mu-N(t)Bu)(2)Te(HN(t)Bu)](2+) cation by two hydrogen bonds [H...I = 2.823(5) and 2.983(5) A; N...I = 3.697(8) and 3.857(9) A]. The I(3)(-) anions and I(2) molecules in 5b show virtually identical bond parameters to those in 5a. The treatment of 1 with iodine and the reactions of its methylated derivatives, [((t)BuNMe)Te(mu-N(t)Bu)(2)Te(N(t)()Bu)][OSO(2)CF(3)] and [((t)BuNMe)Te(mu-N(t)Bu)(2)Te(MeN(t)Bu)][OSO(2)CF(3)](2), with LiI and iodine also afford highly moisture-sensitive polyiodides, either by the formation of N-I charge-transfer complexes or by ionic interactions. The crystal structures of the partially hydrolyzed products, [((t)BuIN)Te(mu-N(t))Bu)(2)Te(mu-O)](2)(I(3))(2) (3), [((t)BuMeN)Te(mu-N(t)Bu)(2)Te(mu-O)](2)(I(3))(2) (6), and 6.2MeCN, are also reported.     

An isolable NHC-stabilized silylene radical cation: synthesis and structural characterization

The silyl-substituted silylene-NHC complex bis(tri-tert-butylsilyl)silylene-(1,3,4,5-tetramethylimidazol-2-ylidene) [((t)Bu(3)Si)(2)Si:←NHC(Me), 2] was synthesized and isolated as air- and moisture-sensitive orange crystals by reductive debromination of the dibromosilane ((t)Bu(3)Si)(2)SiBr(2) (1) with 2.0 equiv of KC(8) in the presence of NHC(Me). In addition, the silylene-NHC complex 2 cleanly underwent one-electron oxidation with 1.0 equiv of Ph(3)C(+)·Ar(4)B(-) (Ar(4)B(-) = tetrakis[4-(tert-butyldimethylsilyl)-2,3,5,6-tetrafluorophenyl]borate) in benzene to afford the NHC-stabilized silylene radical cation [((t)Bu(3)Si)(2)Si←NHC(Me)](?+)·Ar(4)B(-) (3). The radical cation 3 was isolated as air- and moisture-sensitive yellow crystals and structurally characterized by X-ray crystallography and electron paramagnetic resonance spectroscopy, which showed that 3 has a planar structure with a π-radical nature.     

Coordination polymers of zinc with (η6-benzenecarboxylate) chromium tricarbonyl

Different coordination polymers were obtained by the reaction of (benzoic acid) chromium tricarbonyl with zinc acetate in the presence of various organic dipyridyl linkers. Depending on the nature of the linker either monomeric or polymeric compounds were obtained. Reactions of (benzoic acid) chromium tricarbonyl with zinc acetate and bidentate pyridine based ligands 4,4'-bipyridine (4,4'-bipy), 1,2-bis(4-pyridyl)ethane (bpe), 1,3-bis(4-pyridyl)propane (tmdp), and 2,2'dipyridylamine (DPA) afforded the novel coordination polymers [Zn[{η(6)-C(6)H(5)COO}Cr(CO)(3)](2)(4,4'-bipy)](n), [Zn[{η(6)-C(6)H(5)COO}Cr(CO)(3)](2)(bpe)](n), [Zn[{η(6)-C(6)H(5)COO}Cr(CO)(3)](2)(tmdp)}](n), and the monomeric complex [Zn[{η(6)-C(6)H(5)COO}Cr(CO)(3)](2)(DPA)]. The solid state structures of all compounds were determined by single crystal X-ray diffraction. By using 1,3-bis(4-pyridyl)propane as a linker a chiral infinite helical structure was formed in the solid state. Thermogravimetric analysis (TGA) studies showed that upon heating the carbonyl groups of the {η(6)-C(6)H(5)COO}Cr(CO)(3) anion were lost before the organic ligand sphere was thermally decomposed.     

Chemistry of a binuclear cadmium(II) hydroxide complex: formation from water,CO(2) reactivity,and comparison to a zinc analog

Treatment of the bmnpa (N,N-bis-2-(methylthio)ethyl-N-((6-neopentylamino-2-pyridyl)methyl)amine) ligand with equimolar amounts of Cd(ClO(4))(2).5H(2)O and Me(4)NOH.5H(2)O in CH(3)CN yielded the binuclear cadmium hydroxide complex [((bmnpa)Cd)(2)(mu-OH)(2)](ClO(4))(2).CH(3)CN (1). Complex 1 may also be prepared (a) by treatment of a CH(3)CN solution of (bmnpa)Cd(ClO(4))(2) (2) with 1 equiv of n-BuLi, followed by treatment with water or (b) from 2 in the presence of 1 equiv each of water and NEt(3). The hydroxide derivative 1 is not produced from 2 and water in the absence of an added base. Complex 1 possesses a binuclear structure in the solid state with hydrogen-bonding and CH/pi interactions involving the bmnpa ligand. The overall structural features of 1 differ from the halide derivative [((bmnpa)Cd)(2)(mu-Cl)(2)](ClO(4))(2) (3), particularly in that the Cd(2)(mu-OH)(2) core of 1 is symmetric whereas the Cd(2)(mu-Cl)(2) core of 3 is asymmetric. In acetonitrile solution, 1 behaves as a 1:2 electrolyte and retains a binuclear structure and secondary hydrogen-bonding and CH/pi interactions, whereas 3 is a 1:1 electrolyte, indicating formation of a mononuclear [(bmnpa)CdCl]ClO(4) species in solution. Treatment of 1 with CO(2) in anhydrous CH(3)CN yields the bridging carbonate complex [((bmnpa)Cd)(2)(mu-CO(3))](ClO(4))(2).CH(3)CN (4). Treatment of a chemically similar zinc hydroxide complex, [((benpa)Zn)(2)(mu-OH)(2)](ClO(4))(2) (benpa = N,N-bis-2-(ethylthio)ethyl-N-((6-neopentylamino-2-pyridyl)methyl)amine, with CO(2) also results in the formation of a carbonate derivative, [((benpa)Zn)(2)(mu-CO(3))](ClO(4))(2) (5), albeit the coordination mode of the bridging carbonate moiety is different. Treatment of 4 with added water results in no reaction, whereas 5 under identical conditions will undergo reaction to yield the zinc hydroxide complex [((benpa)Zn)(2)(mu-OH)(2)](ClO(4))(2).     

Synthesis, structural diversity and fluorescent characterisation of a series of d10 metal-organic frameworks (MOFs): reaction conditions, secondary ligand and metal effects

Along with our recent investigation on the flexible ligand of H(2)ADA (1,3-adamantanediacetic acid), a series of Zn(II) and Cd(II) metal-organic frameworks, namely, [Zn(3)(ADA)(3)(H(2)O)(2)](n)·5nH(2)O (1), [Zn(ADA)(4,4'-bipy)(0.5)](n) (2), [Zn(2)(ADA)(2)(bpa)](n) (3), [Zn(2)(ADA)(2)(bpa)](n) (4), [Zn(2)(ADA)(2)(bpp)](n) (5), [Cd(HADA)(2)((4,4'-bipy)](n) (6), [Cd(3)(ADA)(3)(bpa)(2)(CH(3)OH)(H(2)O)](n) (7), and [Cd(2)(ADA)(2)(bpp)(2)](n)·7nH(2)O (8) have been synthesized and structurally characterized (where 4,4'-bipy = 4,4'-dipyridine, bpa = 1,2-bis(4-pyridyl)ethane and bpp = 1,3-bis(4-pyridyl)propane). Due to various coordination modes and conformations of the flexible dicarboxylate ligand and the different pyridyl-containing coligands, these complexes exhibit structural and dimensional diversity. Complex 1 exhibits a three-dimensional (3D) framework containing one-dimensional (1D) Zn(II)-O-C-O-Zn(II) clusters. Complex 2 exhibits a 2D structure constructed by 1D double chains based on [Zn(2)ADA(2)] units and a 4,4'-bipy pillar. Complexes 3 and 4 possess isomorphic 2D layer structures, resulting from the different coordination modes of carboxylate group of ADA ligands. Complex 5 features a 2D 4(4) layer in which ADA ligands and Zn(II) atoms construct a 1D looped chain and the chains are further connected by bpp ligands. Complex 6 is composed of 1D zig-zag chains that are entangled through hydrogen-bonding interactions to generate a 2D network. Complex 7 is a rare (3,5)-connected network. Complex 8 possesses a 3D microporous framework with lots of water molecules encapsulated in the channels. The structural diversity of the complexes perhaps mainly results from using diverse secondary ligands and different metal centre ions, and means the assistant ligand and metal centre play important roles in the design and synthesis of target metal-organic frameworks. This finding revealed that ADA could be used as an effective bridging ligand to construct MOFs and change coordination modes and conformational geometries in these complexes. The thermogravimetric analyses, X-ray powder diffraction and solid-state luminescent properties of the complexes have also been investigated.     

AgC(CN)3-based coordination polymers

Reaction of Ag(tcm), tcm = tricyanomethanide, C(CN)(3)(-), with a range of terminal and bridging ligands results in formation of a series of new coordination polymers. Recrystallization of Ag(tcm) from acetonitrile generates Ag(tcm)(MeCN), which is composed of corrugated (6,3) sheets displaying two-fold 2D --> 2D parallel interpenetration and is topologically identical to the parent Ag(tcm) structure. Ag(tcm)(L) species, L = 1,4-diazobicyclo-[2.2.2]-octane (dabco) or 4,4'-bipyridine (bipy), contain two interpenetrating 3D networks composed of 3-connecting (tcm) and 5-connecting (Ag) centers. The structure of Ag(tcm)(bpe), bpe = 1,2-bis(4-pyridyl)ethene, contains 1D ladderlike polymers connected by weak Ag-tcm interactions into two interpenetrating 3D nets. Ag(tcm)(Mepyz)(3/2), Mepyz = methylpyrazine, also contains 1D ladders, while Ag(tcm)(Me(4)pyz)(1/2), Me(4)pyz = tetramethylpyrazine, contains 2D sheets composed of Ag(tcm) 1D "tubes" linked by bridging Me(4)pyz ligands. Ag(tcm)(hmt), hmt = hexamethylenetetramine, has a 3D network structure in which the hmt ligands are 3-connecting, the tcm anions are 2-connecting, and the silver atoms are 5-connecting. The topology is the same as displayed by Ag(tcm)(L), L = dabco or bipy.     

Five-coordinate aluminum bromides: synthesis, structure, cation formation, and cleavage of phosphate ester bonds

The alkane elimination reaction between Salen((t)Bu)H(2) ligands and diethylaluminum bromide was used to prepare three Salen aluminum bromide compounds salen((t)Bu)AlBr (1) (salen = N,N'-ethylenebis(3,5-di-tert-butylsalicylideneimine)), salpen((t)Bu)AlBr (2) (salpen = N,N'-propylenebis(3,5-di-tert-butylsalicylideneimine)), and salophen((t)Bu)AlBr (3) (salophen = N,N'-o-phenylenenebis(3,5-di-tert-butylsalicylideneimine)). The compounds contain five-coordinate aluminum either in a distorted square pyramidal or a trigonal bipyramidal environment. The bromide group in these compounds could be displaced by triphenylphosphine oxide or triphenyl phosphate to produce the six-coordinate cationic aluminum compounds [salen((t)Bu)Al(Ph(3)PO)(2)]Br (4), [salpen((t)Bu)Al(Ph(3)PO)(2)]Br (5), [salophen((t)Bu)Al(Ph(3)PO)(2)]Br (6), and [salophen((t)Bu)Al[(PhO)(3)PO)](2)]Br (7). All the compounds were characterized by (1)H, (13)C, (27)Al, and (31)P NMR, IR, mass spectrometry, and melting point. Furthermore, compounds 1-3 and 5-7 were structurally characterized by single-crystal X-ray diffraction. Compounds 1-3 dealkylated a series of organophosphates in stoichiometric reactions by breaking the ester C-O bond. Also, they were catalytic in the dealkylation reaction between trimethyl phosphate and added boron tribromide.     

Lithiation of (tBuNH)3PNSiMe3 and formation of tetraimidophosphate complexes containing M3O3 rings (M = Li, K): X-ray structure of the stable radical [(Me3SiN)P(mu3-N(t)Bu)3[mu3-Li(THF)]3(OtBu))

The reaction of ((t)BuNH)(3)PNSiMe(3) (1) with 1 equiv of (n)BuLi results in the formation of Li[P(NH(t)Bu)(2)(N(t)Bu)(NSiMe(3))] (2); treatment of 2 with a second equivalent of (n)BuLi produces the dilithium salt Li(2)[P(NH(t)Bu)(N(t)Bu)(2)(NSiMe(3))] (3). Similarly, the reaction of 1 and (n)BuLi in a 1:3 stoichiometry produces the trilithiated species Li(3)[P(N(t)Bu)(3)(NSiMe(3))] (4). These three complexes represent imido analogues of dihydrogen phosphate [H(2)PO(4)](-), hydrogen phosphate [HPO(4)](2)(-), and orthophosphate [PO(4)](3)(-), respectively. Reaction of 4 with alkali metal alkoxides MOR (M = Li, R = SiMe(3); M = K, R = (t)Bu) generates the imido-alkoxy complexes [Li(3)[P(N(t)Bu)(3)(NSiMe(3))](MOR)(3)] (8, M = Li; 9, M = K). These compounds were characterized by multinuclear ((1)H, (7)Li, (13)C, and (31)P) NMR spectroscopy and, in the cases of 2, 8, and 9.3THF, by X-ray crystallography. In the solid state, 2 exists as a dimer with Li-N contacts serving to link the two Li[P(NH(t)Bu)(2)(N(t)Bu)(NSiMe(3))] units. The monomeric compounds 8 and 9.3THF consist of a rare M(3)O(3) ring coordinated to the (LiN)(3) unit of 4. The unexpected formation of the stable radical [(Me(3)SiN)P(mu(3)-N(t)Bu)(3)[mu(3)-Li(THF)](3)(O(t)Bu)] (10) is also reported. X-ray crystallography indicated that 10 has a distorted cubic structure consisting of the radical dianion [P(N(t)Bu)(3)(NSiMe(3))](.2)(-), two lithium cations, and a molecule of LiO(t)Bu in the solid state. In dilute THF solution, the cube is disrupted to give the radical monoanion [(Me(3)SiN)((t)BuN)P(mu-N(t)Bu)(2)Li(THF)(2)](.-), which was identified by EPR spectroscopy.     

The course of (R2R'SiO)3TaCl2 (R = tBu, R' = H, Me, Ph, tBu (silox); R = iPr, R' = tBu, iPr) reduction is dependent on siloxide size

Various sized siloxides (Cy(3)SiO > (t)Bu(3)SiO > (t)Bu(2)PhSiO > (t)Bu(2)MeSiO approximately (i)Pr(2)(t)BuSiO > (i)Pr(3)SiO > (t)Bu(2)HSiO) were used to make (R(2)R'SiO)(3)TaCl(2) (R = (t)Bu, R' = H (1-H), Me (1-Me), Ph (1-Ph), (t)Bu (1); R = (i)Pr, R' = (t)Bu (1-(i)Pr(2)); R = R' = (i)Pr (1-(i)Pr(3)); R = R' = (c)Hex (Cy)). Product analyses of sodium amalgam reductions of several dichlorides suggest that [(R(2)R'SiO)(3)Ta](2)(mu-Cl)(2) may be a common intermediate. When the siloxide is large (1-(t)Bu), formation of the Ta(III) species ((t)Bu(3)SiO)(3)Ta (6) occurs via disproportionation. When the siloxide is small, the Ta(IV) intermediate is stable (e.g., [((i)Pr(3)SiO)(3)Ta](2)(mu-Cl)(2) (2)), and when intermediate sized siloxides are used, solvent bond activation via unstable Ta(III) tris-siloxides is proposed to occur. Under hydrogen, reductions of 1-Me and 1-Ph provide Ta(IV) and Ta(V) hydrides [((t)Bu(2)MeSiO)(3)Ta](2)(micro-H)(2) (4-Me) and ((t)Bu(2)PhSiO)(3)TaH(2) (7-Ph), respectively.     

Syntheses, structures, and characterizations of four new lead(II) 5-sulfosalicylate complexes with both chelating and bridging neutral ligands

Four structurally diverse complexes, {[Pb(Hssal)(2,2'-bipy)](4,4'-bipy)0.5}n (1), [Pb2(Hssal)2(2,2'-bipy)2(4,4'-bipy)(H2O)2] (2), [Pb(Hssal)(phen)(4,4'-bipy)0.5]n (3), and [Pb(Hssal)(2,2'-bipy)(bpe)0.5]n (4), have been synthesized and characterized by elemental analyses, IR, thermogravimetric analyses, fluorescent spectra, and single-crystal X-ray analyses, where Hssal2- is doubly deprotonated 5-sulfosalicylate, 2,2'-bipy is 2,2'-bipyridine, phen is 1,10-phenanthroline, 4,4'-bipy is 4,4'-bipyridine, and bpe is trans-1,2-bis(4-pyridyl)ethylene. The structure of complex 1 possesses a one-dimensional ladderlike chain with guest 4,4'-bipy molecules, while the molecular structure of complex 2 is a dimeric species with a coordinating 4,4'-bipy ligand. Complex 3 consists of a one-dimensional ladderlike chain with monodentate 4,4'-bipyridine but somewhat different from that of complex 1. Complex 4 is a two-dimensional layer structure. In 1-4, all 5-sulfosalicylates are doubly deprotonated, and all carboxylate groups of Hssal2- chelate to PbII ions; however, the coordination modes of sulfonyl groups are different: syn-syn bridging in 1, noncoordinating in 2, syn-skew bridging in 3, and one-atom bridging in 4. The noncoordinating mode of sulfonate in PbII complexes containing 5-sulfosalicylate is first reported in this presentation. The 4,4'-bipy ligands act as guest molecules in 1, dimeric linkers in 2, and monodentates in 3. The pi-pi stacking interactions can be observed in complexes 1-3, whereas there is no such interaction in complex 4. The coordination spheres of PbII ions in 1-4 are controlled by three factors: the activity of a lone pair of electrons, weak Pb-O interactions, and pi-pi stacking interactions. The PbII lone pair in 4 is inactive, whereas in 1-3, they are stereochemically active. The thermal stability and fluorescent property of complexes 1-4 are different from those of PbII complexes only containing chelating ligands, [Pb(Hssal)(2,2'-bipy)(DMF)]n (5), and [Pb(Hssal)(2,2'-bipy)(H2O)]n (6), and [Pb(Hssal)(phen)(DMF)]n (7).     

Construction of [(eta5-C5Me5)WS3Cu3]-based supramolecular compounds from preformed incomplete cubane-like clusters [PPh4][(eta5-C5Me5)WS3(CuX)3] (X = CN, Br)

Approaches to the assembly of (eta5-C5Me5)WS3Cu3-based supramolecular compounds from two preformed incomplete cubane-like clusters [PPh4][(eta5-C5Me5)WS3(CuX)3] (X = CN, 1a; X = Br, 1b) have been investigated. Treatment of 1a with LiBr/1,4-pyrazine (1,4-pyz), pyridine (py), LiCl/py, or 4,4'-bipyridine (4,4'-bipy) and treatment of 1b with 4,4'-bipy gave rise to a new set of W/Cu/S cluster-based compounds, [Li[((eta5-C5Me5)WS3Cu3(mu3-Br))2(mu-CN)3].C6H6]infinity (2), [(eta5-C5Me5)WS3Cu3(mu-CN)2(py)]infinity (3), [[PPh4][(eta5-C5Me5)WS3Cu3(mu3-Cl)(mu-CN)(CN)].py]infinity (4), [PPh4]2[(eta5-C5Me5)WS3Cu3(CN)2]2(mu-CN)2.(4,4'-bipy) (5), and [[(eta5-C5Me5)WS3Cu3Br(mu-Br)(4,4'-bipy)].Et2O]infinity (6). The structures of 2-6 have been characterized by elemental analysis, IR spectra, and single-crystal X-ray crystallography. Compound 2 displays a 1D ladder-shaped chain structure built of square-like [[(eta5-C5Me5)WS3Cu3(mu3-Br)(mu-CN)]4](mu-CN)2(2-) anions via two pairs of Cu-mu-CN-Cu bridges. Compound 3 consists of a single 3D diamond-like network in which each (eta5-C5Me5)WS3Cu3 unit, serving as a tetrahedral node, interconnects with four other nearby units through Cu-mu-CN-Cu bridges. Compound 4 contains a 1D zigzag chain array made of cubane-like [(eta5-C5Me5)WS3Cu3(mu3-Cl)(mu-CN)(CN)]- anions linked by a couple of Cu-mu-CN-Cu bridges. Compound 5 contains a dimeric structure in which the two incomplete cubane-like [(eta5-C5Me5)WS3(CuCN)2(mu-CN)]- anions are strongly held together via a pair of Cu-mu-CN-Cu bridges. Compound 6 contains a 2D brick-wall layer structure in which dimers of [(eta5-C5Me5)WS3Cu3Br(4,4'-bipy)]2 are interconnected via four Cu-mu-Br-Cu bridges. The successful construction of (eta5-C5Me5)WS3Cu3-based supramolecular compounds 2-6 from the geometry-fixed clusters 1a and 1b may expand the scope of the rational design and construction of cluster-based supramolecular assemblies.     

Thermally triggered reductive elimination of bromine from Au(III) as a path to Au(I)-based coordination polymers

Four new [AuBr(2)(CN)(2)](-)-based coordination polymers, Zn(pyz)(NCMe)(2)[AuBr(2)(CN)(2)](2) (1; pyz = pyrazine), Co(pyz)[AuBr(2)(CN)(2)](2)·H(2)O (2) and [M(bipy)(2)(AuBr(2)(CN)(2))][(n)Bu(4)N][AuBr(2)(CN)(2)](2) (bipy = 4,4'-bipyridine), where M = Co (5) and Zn (6), were synthesized and three of them structurally characterized. 1 forms 1-D chains connected by pyz ligands while isostructural 5 and 6 form 3-D frameworks via [AuBr(2)(CN)(2)](-) and bipy linkers. Aqueous suspensions of 2, 5 and 6 or their precursors in situ (preferred) were heated hydrothermally to 125 °C, triggering the reductive elimination of bromine from the Au(III) centres, which yielded the [Au(CN)(2)](-)-based coordination polymers M(pyz)[Au(CN)(2)](2), where M = Zn (3) or Co (4) and Zn(bipy)[Au(CN)(2)][Au{Br(0.68)(CN)(0.32)}CN] (7), or a mixture of cyanoaurate(I)-containing products in the case of 5 and 6. The structural characterization of 3 revealed a [Au(CN)(2)](-)/pyz-based framework similar to previously reported Cu(pyz)[Au(CN)(2)](2), whereas 7 formed an intricate network consisting of individual 2-D networks held together by AuAu interactions and featuring the rare [AuBrCN](-) unit. The kinetics of the thermally-induced reductive elimination of Br(2) from K[AuBr(2)(CN)(2)] in 1-BuOH yielded a t(?) of approx. 10 min to 4 h from 98 to 68 °C, and activation parameters of ΔH(?) = 131(15) kJ mol(-1) and ΔS(?) = 14.97(4) kJ K(-1)mol(-1), indicating that the elimination of the halogen provides the highest barrier to activation.     

Synthesis, crystal structures and magnetic properties of dinuclear copper(II) compounds with NNO tridentate Schiff base ligands and bridging aliphatic diamine and aromatic diimine linkers

The synthesis and the characterization of new dinuclear copper(II) compounds of general formula [(L(a-d))(2)Cu(2)(μ-N-N)](ClO(4))(2) (1-6) with either neutral aliphatic diamine (N-N = piperazine, pip) or aromatic diimine (N-N = 4,4'-bipyridine, 4,4'-bipy) linker are reported. The copper ligands L(-) (L(a-) = (E)-2-((2-aminoethylimino)methyl)phenolate, L(b-) = (E)-2-((2-aminopropylimino)methyl)-phenolate, L(c-) = (E)-2-((2-aminoethylimino)methyl)4-nitrophenolate, L(d-) = (E)-2-((2-aminoethylimino)methyl)4-methoxyphenolate) are NNO tridentate Schiff bases derived from the monocondensation of a substituted salicylaldehyde 5-G-salH (G = NO(2), H, OMe) with ethylenediamine, en, or 1,3-propylenediamine, tn. The crystal structures of compounds [(L(a))(2)Cu(2)(MeOH)(2)(μ-4,4'-bipy)](ClO(4))(2) (1·2MeOH), [(L(b))(2)Cu(2)(MeOH)(2)(μ-4,4'-bipy)](ClO(4))(2) (2·2MeOH), [(L(d))(2)Cu(2)(μ-4,4'-bipy)](ClO(4))(2) (4), [(L(a))(2)Cu(2)(μ-pip)](ClO(4))(2) (5) and [(L(b))(2)Cu(2)(μ-pip)](ClO(4))(2) (6) have been determined, revealing the preferred (e-e)-chair conformation of the bridging piperazine in compounds 5 and 6. The presence of hydrogen-bond-mediated intermolecular interactions, that involve the methanol molecules, yields dimers of dinuclear units for 1·2MeOH, and infinite zig-zag chains for 2·2MeOH. The temperature dependences of the magnetic susceptibilities χ(M)(T) for all compounds were measured, indicating the presence of antiferromagnetic Cu-Cu exchange. For the compounds 2-4 with 4,4'-bipy, the coupling constants J are around -1 cm(-1), while in compound 1 no interaction could be detected. The compounds 5 and 6 with piperazine display higher Cu-Cu magnetic interactions through the σ-bonding backbone of the bridging molecule, with J around -8 cm(-1), and the coupling is favoured by the (e-e)-chair conformation of the diamine ring. The non-aromatic, but shorter, linker piperazine gives rise to stronger Cu-Cu antiferromagnetic couplings than the aromatic, but longer, 4,4'-bipyridine. In the latter case, the rotation along the C-C bond between the two pyridyl rings and the consequent non co-planarity of the two copper coordination planes play an important role in determining the magnetic communication. EPR studies reveal that the dinuclear species are not stable in solution, yielding the solvated [(L)Cu(MeOH)](+) and the mononuclear [(L)Cu(N-N)](+) species; it appears that the limited solubility of the dinuclear compounds is responsible for their isolation in the solid state.     

First row divalent transition metal complexes of aryl-appended tris((pyridyl)methyl)amine ligands: syntheses, structures, electrochemistry, and hydroxamate binding properties

Divalent manganese, cobalt, nickel, and zinc complexes of 6-Ph(2)TPA (N,N-bis((6-phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine; [(6-Ph(2)TPA)Mn(CH(3)OH)(3)](ClO(4))(2) (1), [(6-Ph(2)TPA)Co(CH(3)CN)](ClO(4))(2) (2), [(6-Ph(2)TPA)Ni(CH(3)CN)(CH(3)OH)](ClO(4))(2) (3), [(6-Ph(2)TPA)Zn(CH(3)CN)](ClO(4))(2) (4)) and 6-(Me(2)Ph)(2)TPA (N,N-bis((6-(3,5-dimethyl)phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine; [(6-(Me(2)Ph)(2)TPA)Ni(CH(3)CN)(2)](ClO(4))(2) (5) and [(6-(Me(2)Ph)(2)TPA)Zn(CH(3)CN)](ClO(4))(2) (6)) have been prepared and characterized. X-ray crystallographic characterization of 1A.CH(3)()OH and 1B.2CH(3)()OH (differing solvates of 1), 2.2CH(3)()CN, 3.CH(3)()OH, 4.2CH(3)()CN, and 6.2.5CH(3)()CN revealed mononuclear cations with one to three coordinated solvent molecules. In 1A.CH(3)()OH and 1B.2CH(3)()OH, one phenyl-substituted pyridyl arm is not coordinated and forms a secondary hydrogen-bonding interaction with a manganese bound methanol molecule. In 2.2CH(3)()CN, 3.CH(3)()OH, 4.2CH(3)()CN, and 6.2.5CH(3)()CN, all pyridyl donors of the 6-Ph(2)TPA and 6-(Me(2)Ph)(2)TPA ligands are coordinated to the divalent metal center. In the cobalt, nickel, and zinc derivatives, CH/pi interactions are found between a bound acetonitrile molecule and the aryl appendages of the 6-Ph(2)TPA and 6-(Me(2)Ph)(2)TPA ligands. (1)H NMR spectra of 4 and 6 in CD(3)NO(2) solution indicate the presence of CH/pi interactions, as an upfield-shifted methyl resonance for a bound acetonitrile molecule is present. Examination of the cyclic voltammetry of 1-3 and 5 revealed no oxidative (M(II)/M(III)) couples. Admixture of equimolar amounts of 6-Ph(2)TPA, M(ClO(4))(2).6H(2)O, and Me(4)NOH.5H(2)O, followed by the addition of an equimolar amount of acetohydroxamic acid, yielded the acetohydroxamate complexes [((6-Ph(2)TPA)Mn)(2)(micro-ONHC(O)CH(3))(2)](ClO(4))(2) (8), [(6-Ph(2)TPA)Co(ONHC(O)CH(3))](ClO(4))(2) (9), [(6-Ph(2)TPA)Ni(ONHC(O)CH(3))](ClO(4))(2) (10), and [(6-Ph(2)TPA)Zn(ONHC(O)CH(3))](ClO(4))(2) (11), all of which were characterized by X-ray crystallography. The Mn(II) complex 8.0.75CH(3)()CN.0.75Et(2)()O exhibits a dinuclear structure with bridging hydroxamate ligands, whereas the Co(II), Ni(II), and Zn(II) derivatives all exhibit mononuclear six-coordinate structures with a chelating hydroxamate ligand.