Polyfluorene Polyelectrolyte Nanoparticles: Synthesis of Innovative Stabilizers for Heterophase Polymerization

Polyfluorene‐bearing bromohexyl side chains are quaternized by 1‐vinylimidazole in order to attach dialkylimidazolium bromide ionic liquid (IL) species along the conjugated backbone. Subsequently, polyfluorene polyelectrolyte nanoparticles (NPs) of 40 nm in average size are created via radical cross‐linking of the pendant vinylimidazolium groups. Anion exchange from Br⁻ to BF₄⁻, PF₆⁻, and bis(trifluoromethylsulfonyl)imide anion (TFSI⁻) renders NPs adjustable dispersability in various organic solvents. The hydrophobic‐conjugated backbone and the hydrophilic dialkylimidazolium bromide IL moieties depict an amphiphilic profile, which allows the NPs to be deployed as conductive stabilizer in the emulsion polymerization of styrene. The resultant latexes are fluorescent, tunable in size and can be transferred to organic solvents without forfeiting their colloidal stability.

     

Poly(exTTF): A Novel Redox‐Active Polymer as Active Material for Li‐Organic Batteries

The first polymer bearing exTTF units intended for the use in electrical charge storage is presented. The polymer undergoes a redox reaction involving two electrons at −0.20 V vs Fc/Fc⁺ and is applied as active cathode material in a Li‐organic battery. The received coin cells feature a theoretical capacity of 132 mAh g⁻¹, a cell potential of 3.5 V, and a lifetime exceeding more than 250 cycles.

     

Performance Enhancement of Polymer Solar Cells by Using Two Polymer Donors with Complementary Absorption Spectra

Performance enhancement of polymer solar cells (PSCs) is achieved by expanding the absorption of the active layer of devices. To better match the spectrum of solar radiation, two polymers with different band gaps are used as the donor material to fabricate ternary polymer cells. Ternary blend PSCs exhibit an enhanced short‐circuit current density and open‐circuit voltage in comparison with the corresponding HD‐PDFC‐DTBT (HD)‐ and DT‐PDPPTPT (DPP)‐based binary polymer solar cells, respectively. Ternary PSCs show a power conversion efficiency (PCE) of 6.71%, surpassing the corresponding binary PSCs. This work demonstrates that the fabrication of ternary PSCs by using two polymers with complementary absorption is an effective way to improve the device performance.

     

Balanced Ambipolar Poly(diketopyrrolopyrrole‐alt‐tetrafluorobenzene) Semiconducting Polymers Synthesized via Direct Arylation Polymerization

The synthesis of an ambipolar π‐conjugated copolymer consisting of alternating diketopyrrolopyrrole and tetrafluorobenzene via direct arylation polymerization (DAP) is reported. Two different combinations of monomers are investigated under various catalytic conditions for DAP. The target polymer obtained under an optimized catalytic condition shows minimal structural defects, a number‐average molecular weight of 33.2 kDa, and balanced electron and hole mobility of 1 × 10⁻² cm² V⁻¹ S⁻¹ in the organic field‐effect transistors fabricated and tested under ambient conditions.

     

Low‐Temperature Synthesis of Thermoresponsive Diblock Copolymer Nano‐Objects via Aqueous Photoinitiated Polymerization‐Induced Self‐Assembly (Photo‐PISA) using Thermoresponsive Macro‐RAFT Agents

Photoinitiated reversible addition‐fragmentation chain transfer (RAFT) dispersion polymerization of 2‐hydroxypropyl methacrylate is conducted in water at low temperature using thermoresponsive copolymers of 2‐(2‐methoxyethoxy) ethyl methacrylate and oligo(ethylene glycol) methacrylate (M_n = 475 g mol⁻¹) as the macro‐RAFT agent. Kinetic studies confirm that quantitative monomer conversion is achieved within 15 min of visible‐light irradiation (405 nm, 0.5 mW cm⁻²), and good control is maintained during the polymerization. The polymerization can be temporally controlled by a simple “ON/OFF” switch of the light source. Finally, thermoresponsive diblock copolymer nano‐objects with a diverse set of complex morphologies (spheres, worms, and vesicles) are prepared using this particular formulation.

     

Convenient Pd‐Catalyzed Synthesis of Large Unimolecular Star Polyethylene Nanoparticles

A simplistic convenient “arm‐first” catalytic synthesis method is demonstrated to render soft unimolecular star polyethylene nanoparticles. Low‐dispersity polyethylene arms of controllable length and topology are first synthesized via Pd‐catalyzed “living” ethylene poly­merization. The subsequent addition of norbornadiene as a unique cross‐linker renders the block polymer containing a short polynorbornadiene (PNBD) sequence. Efficient and rapid catalytic cross‐linking of the PNBD sequences occurs in the polymer precipitation and drying steps to give rise to star polyethylene nanoparticles. The star polymers are featured with tunable arm length and topology, high molecular weight (as high as 1770 kg mol⁻¹), high arm numbers (as high as 88), and desirable average nano­particle size (29−72 nm).

     

An Efficient N‐Heterocyclic Carbene‐Ruthenium Complex: Application Towards the Synthesis of Polyesters and Polyamides

The ruthenium benzimidazolylidene‐based N‐heterocyclic carbene (NHC) complex 4 catalyzes the direct dehydrogenative condensation of primary alcohols into esters and primary alcohols in the presence of amines to the corresponding amides in high yields. This efficient new catalytic system shows a high selectivity towards the conversion of diols to polyesters and of a mixture of diols and diamines to polyamides. The only side product formed in this reaction is molecular hydrogen. Remarkable is the conversion of hydroxytelechelic polytetrahydrofuran ( = 1000 g mol⁻¹)—a polydispers starting material—into a hydrolytically degradable polyether with ester linkages ( = 32 600 g mol⁻¹) and, in the presence of aliphatic diamines, into a polyether with amide linkages in the back bone ( = 16 000 g mol⁻¹).

     

Tunable AICPL of (S)‐Binaphthyl‐Based Three‐Component Polymers via FRET Mechanism

Five three‐component chiral polymers incorporating (S )‐1,1′‐binaphthyl, tetraphenylethene (TPE) and fluorene moieties are designed and synthesized by Pd‐catalyzed Sonogashira reaction. All these polymers show obvious aggregation induced emission enhancement response behavior in the fluorescence emission region of 460–480 nm. Interestingly, three of them show aggregation‐induced circularly polarized luminescence (AICPL) signals in tetrahydrofuran–H₂O mixtures. Most importantly, these AICPL signals can be tuned by changing the molar ratios of TPE and fluorene components through fluorescence resonance energy transfer and give the highest glum = ±4.0 × 10⁻³. This work provides a novel strategy for developing AICPL‐enhanced materials.

     

Single‐Chain Self‐Folding of Synthetic Polymers Induced by Metal–Ligand Complexation

The controlled folding of a single polymer chain is for the first time realized by metal‐ complexation. α,ω‐Bromine functional linear polymers are prepared via activators regenerated by electron transfer (ARGET) ATRP (_,SEC = 5900 g mol⁻¹, Đ = 1.07 and 12 000 g mol⁻¹, Đ = 1.06) and the end groups of the polymers are subsequently converted to azide functionalities. A copper‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction is carried out in the presence of a novel triphenylphosphine ligand and the polymers to afford homotelechelic bis‐triphenylphosphine polymeric‐macroligands (MLs) (_,SEC = 6600 g mol⁻¹, Đ = 1.07, and 12 800 g mol⁻¹, Đ = 1.06). Single‐chain metal complexes (SCMCs) are formed in the presence of Pd(II) ions in highly diluted solution at ambient temperature. The results derived via ¹H and ³¹P{¹H} NMR experiments, SEC, and DLS unambiguously evidence the efficient formation of SCMCs via metal ligand complexation.

     

Glucose Oxidase and Glucose for Redox‐Initiating the Free Radical Copolymerization of N‐(ferrocenoylmethyl)acrylamide in Aqueous Cyclodextrin Solution

The glucose oxidase and glucose mediated formation of amphipilic copolymers of N‐(ferrocenoylmethyl)acrylamide (NFMA) and N,N‐diethylacrylamide (DEA) in aqueous cyclodextrin solution is presented. Thereby, NFMA is not only a comonomer but also part of the redox initiation system. The obtained copolymers contain NFMA units between 1 and 10 mol%. The molecular masses of the copolymers are dependent on the ferrocene content, whereupon molecular weights between 38 000 and 71 000 g mol⁻¹ are achieved.

     

Improved Thin‐Film Transistor Performance Through a Melt of Poly(para‐phenyleneethynylene)

The performance of polymer field‐effect transistors (PFETs) based on short rigid rod semiconducting poly(2,5‐didodecyloxy‐p‐phenyleneethynylene) (D‐OPPE) is highlighted. The controlled heating and cooling of thin films of D‐OPPE allows for a recrystallization from the melt, boosting the performance of D‐OPPE‐based transistors. The improved film properties induced by controlled annealing lead to a hole field‐effect mobility around 0.014 cm² V⁻¹ s⁻¹, an on/off ratio of 10⁶, a sub‐threshold swing of 3 V dec⁻¹ and a threshold voltage of −35 V, employing a poly(methyl methacrylate) (PMMA) gate dielectric. Thus, PFETs out of D‐OPPE compete now with spin‐coated, polycrystalline poly(3‐hexylthiophene)‐based PFETs.

     

Ring‐Opening Metathesis Polymerization of 18‐e Cobalt(I)‐Containing Norbornene and Application as Heterogeneous Macromolecular Catalyst in Atom Transfer Radical Polymerization

In the last decades, metallopolymers have received great attention due to their various applications in the fields of materials and chemistry. In this article, a neutral 18‐electron exo‐substituted η⁴‐cyclopentadiene CpCo(I) unit‐containing polymer is prepared in a controlled/“living” fashion by combining facile click chemistry and ring‐opening meta­thesis polymerization (ROMP). This Co(I)‐containing polymer is further used as a heterogeneous macromolecular catalyst for atom transfer radical polymerization (ATRP) of methyl methacrylate and styrene.

     

A Luminescent Hypercrosslinked Conjugated Microporous Polymer for Efficient Removal and Detection of Mercury Ions

A hypercrosslinked conjugated microporous polymer (HCMP‐1) with a robustly efficient absorption and highly specific sensitivity to mercury ions (Hg²⁺) is synthesized in a one‐step Friedel–Crafts alkylation of cost‐effective 2,4,6‐trichloro‐1,3,5‐triazine and dibenzofuran in 1,2‐dichloroethane. HCMP‐1 has a moderate Brunauer–Emmett–Teller specific surface (432 m² g⁻¹), but it displays a high adsorption affinity (604 mg g⁻¹) and excellent trace efficiency for Hg²⁺. The π–π* electronic transition among the aromatic heterocyclic rings endows HCMP‐1 a strong fluorescent property and the fluorescence is obviously weakened after Hg²⁺ uptake, which makes the hypercrosslinked conjugated microporous polymer a promising fluorescent probe for Hg²⁺ detection, owning a super‐high sensitivity (detection limit 5 × 10⁻⁸ mol L⁻¹).

     

Novel Donor–Acceptor Polymer Containing 4,7‐Bis(thiophen‐2‐yl)benzo[c][1,2,5]thiadiazole for Polymer Solar Cells with Power Conversion Efficiency of 6.21%

In order to improve the solution processability of 4,7‐bis(thiophen‐2‐yl)benzo[c][1,2,5]thiadiazole (DTBT)‐based polymers, novel donor–acceptor polymer PTOBDTDTBT containing DTBT and benzo[1,2‐b:4,5‐b′]dithiophene (BDT) with conjugated side chain is designed and synthesized with narrow band gap 1.67 eV and low lying HOMO energy level −5.4 eV. The blend film of PTOBDTDTBT and PC₇₁BM exhibits uniform and smooth film with root‐mean‐square (RMS) surface roughness 1.15 nm because of the excellent solubility of PTOBDTDTBT when six octyloxy side chains are introduced. The hole mobility of the blend film is measured to be 4.4 × 10⁻⁵ cm² V⁻¹s⁻¹ by the space‐charge‐limited current (SCLC) model. The optimized polymer solar cells (PSCs) based on PTOBDTDTBT /PC₇₁BM exhibits an improved PCE of 6.21% with V_oc = 0.80 V, J_sc = 11.94 mA cm⁻² and FF = 65.10%, one of the highest PCE in DTBT containing polymers.

     

Ugi Reactions with CO2: Access to Functionalized Polyurethanes,Polycarbonates, Polyamides,and Polyhydantoins

A novel strategy for the incorporation of carbon dioxide into polymers is introduced. For this purpose, the Ugi five‐component condensation (Ugi‐5CC) of an alcohol, CO₂, an amine, an aldehyde, and an isocyanide is used to obtain step‐growth monomers. Polymerization via thiol‐ene reaction or polycondensation with diphenyl carbonate gives diversely substituted polyurethanes or alternating polyurethane‐polycarbonates, respectively. Furthermore, the application of 1,12‐diaminododecane and 1,6‐diisocyanohexane as bifunctional components in the Ugi‐5CC directly results in the corresponding polyamide bearing methyl carbamate side chains ( = 19 850 g mol⁻¹). The latter polymer is further converted into the corresponding polyhydantoin in a highly straightforward fashion.

     

Natural Anionic Polymer Acts as Highly Efficient Trypsin Inhibitor Based on an Electrostatic Interaction Mechanism

Sodium alginate (SA), acting as a trypsin inhibitor by means of electrostatic interaction, is studied. The half‐maximal inhibitory concentration (IC₅₀ = 0.05 μg mL⁻¹) of this natural anionic polymer is about 400 times lower than that of commercial soybean trypsin inhibitor (STI). Unlike the Ca²⁺‐deprivation mechanisms, its inhibition may be attributed to preventing the trypsin active site (TAS) from accessing the macromolecular substrates instead of denaturing it. SA is an efficient, innocuous, and cost‐effective inhibitory excipient that can be conveniently used in many peptide and protein dosage formulations.

     

Synthesis of Biocompatible Glycodendrimer based on Fluorescent Perylene Bisimides and Its Bioimaging

A novel water‐soluble fluorescent glycodendrimer based on perylene bisimides is synthesized, which exhibits high fluorescence quantum yield of 54%. While the binding interactions of PBI‐Man with Concanavalin A (Con A) are studied by fluorescence spectra and CD spectra, which show strong binding affinity for Con A with the binding constant of 3.8 × 10⁷m ⁻¹ for monomeric mannose, nearly four orders of magnitude higher affinity than the monovalent mannose ligand. Furthermore, the fluorescence imaging of macrophage cell with PBI‐Man is investigated, and shows selectively binding interaction with the mannose receptor‐medicated cell entry. Moreover, the 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyl tetrazolium bromide (MTT) activities of PBI‐Man show that PBI‐Man as a biocompatible agent is noncytotoxic to living cells.

     

Facile One‐Step Synthesis of Monodisperse Micron‐Sized Latex Particles with Highly Carboxylated Surfaces

A facile method for the aqueous synthesis of monodisperse and micronmeter‐sized colloids with highly carboxylated surfaces is presented. The method is applied to three different monomers, styrene, methyl methacrylate, and 2,2,2‐trifluoroethyl methacrylate, and illustrate tuning of the size and monodispersity in the reactions. High surface density of carboxylic acids of up to 10 COOH nm⁻² from potentiometric titrations, is achieved through copolymerization with itaconic acid. The versatility of this system is highlighted by creating highly fluorescent and monodisperse particles that can be index matched in aqueous solution and through surface modification via the carboxylic acid groups using standard amidation chemistry.

     

Highly Sensitive Dual‐Mode Fluorescence Detection of Lead Ion in Water Using Aggregation‐Induced Emissive Polymers

A series of fluorene‐based conjugated polymers containing the aggregation‐induced emissive (AIE)‐active tetraphenylethene and dicarboxylate pseudocrown as a receptor exhibits a unique dual‐mode sensing ability for selective detection of lead ion in water. Fluorescence turn‐off and turn‐on detections are realized in 80%–90% and 20% water in tetrahydrofuran (THF), respectively, for lead ion with a concentration as low as 10⁻⁸ m .

     

High‐Efficiency Large‐Bandgap Material for Polymer Solar Cells

High‐molecular‐weight conjugated polymer HD‐PDFC‐DTBT with N‐(2‐hexyldecyl)‐3,6‐difluorocarbazole as the donor unit, 5,6‐bis(octyloxy)benzothiadiazole as the acceptor unit, and thiophene as the spacer is synthesized by Suzuki polycondensation. HD‐PDFC‐DTBT shows a large bandgap of 1.96 eV and a high hole mobility of 0.16 cm² V⁻¹ s⁻¹. HD‐PDFC‐DTBT:PC₇₁BM‐based inverted polymer solar cells (PSCs) give a power conversion efficiency (PCE) of 7.39% with a V_oc of 0.93 V, a J_sc of 14.11 mA cm⁻², and an FF of 0.56.