化学跑合对齿轮胶合的影响

选用了３ 种跑合剂在ＣＬ－１００ 型齿轮试验机上进行满载跑合能力对比试验和齿轮抗胶合载荷级对比试验．结果表明：材质为４５＃ 钢的试验齿轮副和材质为２０ＣｒＭｎＴｉ钢的试验齿轮副用含磨料跑合剂进行１ 次满载跑合试验时,发生严重胶合;而采用化学跑合剂可以实现１ 次满载跑合,且用化学跑合剂跑合后的齿面比用普通油跑合后的齿面抗胶合能力提高１ 个载荷级,显示化学跑合剂在齿轮中的应用很有潜力．     

有效集法在数学规划加权残值法中的应用

本文研究有效集法在数学规划加权残值法求解微分方程问题中的应用。从理论上和实际应用方面 阐明，对于数学规划加权残值法和线性规划问题，有效集法比常用的单纯形法更简便、易程序化、计算速度更快，因此更适用于数学规划加权残值法求解微分方程问题。     

双柱单锥型液-液旋流管内流场的激光诊断

应用激光测速仪，对一种双柱单锥型液 液旋流管内的流动结构，进行了全场范围内的多工况流动诊断研究．揭示出其切向速度由内旋流区和外旋流区构成，其中内旋流区中的速度分布符合准强制涡关系，外旋流区中的速度分布符合准自由涡关系；轴向速度由上行流动区和下行流动区构成，两者之间在直管段以零速点作分界，在锥体段则以零速区作过渡并伴随有一定的回流出现，且该过渡区或回流区的大小随锥体截面的收缩而减小，直到进入直管段后消失；各湍流量的分布以管芯处最大向外逐渐减小，沿轴向是直管段中的湍流度大于锥体段中的湍流度，而且湍流度在旋流管内具有各向异性的特性．     

Remarks on the Behavior of Simple Directionally Reinforced Incompressible Nonlinearly Elastic Solids

The effect of directional reinforcing in generating qualitative changes in the mechanical response of a base neo-Hookean material is examined in the context of homogenous deformation. Single axis reinforcing giving transverse isotropy is the major focus, in which case a standard reinforcing model is characterized by a single constitutive reinforcing parameter. Various qualitative changes in the mechanical response ensue as the reinforcing parameter increases from the zero-value associated with neo-Hookean response. These include (in order): the existence of a limiting contractive stretch for transverse-axis tensile load; loss of monotonicity in off-axis simple shear; loss of monotonicity in on-axis compression; loss of positivity in the stress-shear product in off-axis simple shear; and loss of monotonicity for plane strain in on-axis compression. The qualitative changes in the simple shear response are associated with stretch relaxation in the reinforcing direction due to finite rotation. This revised version was published online in August 2006 with corrections to the Cover Date.     

Prefacein：in dedication to Professors Yong Jin and Zhiqing Yu

This special issue of China PARTICUOLOGY is dedicated to Professors Yong Jin and Zhiqing Yu of Tsinghua University, China, to celebrate over five decades of their careers in chemical engineering research and education. Prof. Jin graduated in 1959 from Ural Polytechnic College in Svivdelovsk in the former USSR and then completed his post-graduate studies in Tianjin University in China in 1960. Thereafter, he taught at the Chinese University of Science and Technology for 13 years before joining Tsinghua University in 1973. Prof. Yu graduated in 1956 from Tianjin University in China and joined Tsinghua University thereafter. Between 1957 and 1959, Prof. Yu undertook more studies in Moscow Mendeleev Institute of Chemical Technology in the former USSR. During the 1970s, Professors Jin and Yu jointly created the Reaction Engineering Program in the Department of Chemical Engineering at Tsinghua University, which later became one of the largest fluidization research groups in the world, known as FLOTU - Fluidization Laboratory of Tsinghua University.     

Method of outer and inner asymptotic expansions in the theory of Brownian motion of aerosol particles

We examine the Brownian motion of particles in a gaseous medium, complicated by the influence of inertial forces. The equation for the distribution function in phase space describing motion of this type was obtained in [1]. Also presented in [1] are the solutions of this equation for certain simple particular cases. The approximate equations of motion of aerosol particles in coordinate space were first obtained in [2] and solved for certain concrete problems in [3,4]. More exact equations of motion in coordinate space, and also the limits of applicability of the equations of [2], are presented in [5].     

Response of glass-fiber-reinforced epoxy specimens to high rates of tensile loading

The object of this investigation is to establish experimentally the mechanical properties, and the mode of failure of glass-fiber-reinforced epoxy plates subjected to high rates of strain (30,000 in./in./min), in the direction of the fibers, on a specially designed impact-loading machine propelled by explosives. The results are correlated with those obtained by testing glass-fiber-reinforced epoxy plates subjected to various low rates of strain (0.0265 in./in./min, 0.66 in./in./min and 26.5 in./in./min).     

Separation zone in fluctuating flow past an obstacle in a channel

The results of an experimental investigation of hydrodynamic processes in separated turbulent flows in the presence of superimposed flow-rate fluctuations are presented. A sharp shortening of the separation zone in the fluctuating flow is found to exist in the vicinity of Sh = 1. The dependence of the separation zone length on the superimposed fluctuation frequency is the same in the cases in which the obstacle is located in the regions of antinodes of both the flow velocity and the pressure.     

Ultrasonic measurement of the bending of a bolt in a shear joint

An ultrasonic pulse/echo technique is used to measure preload in bolts used in structural joints. In this paper, the same instrument is used in a different way to measure change in the ultrasonic measurements due to bending in the bolts. A theory that explains the ultrasonic measurements is developed. The bending loads result in a rotation and a translation of the ultrasonic pulse reflecting face. It also creates a stress gradient in the bolt. This results in a phase variation (or gradient) in the received ultrasonic beam across the face of the transducer. It also results in a physical shift in the received beam relative to the ultrasonic transducer. The phase gradient and the shift in the beam results in change in the pulse travel time. A number of experiments were performed on the bolt to study the effect of the bending on the ultrasonic measurements. The experiments and the theory validate a sensitive new method for measuring the bending loads in the bolts.     

Corrected boundary-integral equations in planar thermoelastoplasticity

There are some errors in the direct boundary-integral equation formulation in terms of displacements or velocities, of problems in planar elastoplasticity and thermoelastoplasticity that have been recently reported in the literature. In particular, lack of proper care in reducing the correctly formulated three dimensional problem to the case of plane strain has resulted in incorrect expressions for certain kernels that appear in the integral equations. A correct direct boundary-integral equation formulation for the plane strain problem in thermoelastoplasticity is presented in this paper.     

Relaxed representations and improving stability in time-stepping analysis of three-dimensional structural nonlinear dynamics

In the present paper, we propose a representation of the discrete motion equations in structural nonlinear dynamics to obtain an improvement in the stability of time numerical integrations. A geometrically nonlinear total Lagrangian formulation for three-dimensional beam elements in the hypotheses of large rotations and small strains is presented. In this formulation, slopes are used instead of rotation parameters to compute the nonlinear representations of the strain measures in the inertial frame of reference. Such representations of the internal strains??rotations compatibility are then imposed in their time derivatives version. The results, related to Newmark approximations for the variations in the displacement and velocity vectors, show a significant increase in the range of stability of the time integration process and a reduction in the number of Newton iterations required in the time integration steps. The numerical tests, furthermore, show that the variation in the total energy in the time steps has bounded oscillations about the zero value.     

半晶态聚合物拉伸变形的微观机理

应用大规模分子动力学方法,采用粗粒化聚乙烯醇模型,模拟了晶区与非晶区随机交杂的半晶态聚合物模型系统,研究了半晶态聚合物在单轴拉伸变形过程中的应力-应变行为和微观结构演变.应力-应变曲线表现出4个典型变形阶段:弹性变形、屈服、应变软化和应变强化.在拉伸变形过程中,主要存在晶区折叠链之间的滑移、晶区破坏、非晶区的解缠结,以及分子链沿拉伸方向重新取向等4种主要的微结构演变形式.在屈服点附近,晶区分子链之间排列紧密程度减小而发生滑移,之后晶区变化需要的应力变小,从而形成应变软化现象.随着应变的增大,经各分子链段协同作用使非晶区分子链的解缠结和重新取向行为扩展到相对宏观尺度,导致拉伸应力增大而形成应变强化现象.      

Development of wake of a rectangular cylinder in a curved stream

In the wake of a rectangular cylinder measurements of mean velocity and some turbulent stresses are carried out in a straight duct and in a curved duct. The difference in turbulent quantities in the wake of the body, in the straight duct an in the curved duct is significant especially in the downstream side of the wake. The shear stresses are more sensitive to curvature than the normal stresses.     

定床弯道内水沙两相运动的数值模拟

在适体同位网格中采用非正交曲线坐标系下的三维k-ε-kp固液两相双流体湍流模型研究弯道内水流和悬浮泥沙运动,主要计算了试验室S型水槽内清水流动的三维流场、120°弯道内水沙两相流动中底沙与底流的运动轨迹以及S型水槽内水沙两相流动的两相流场和泥沙浓度场. 对于S型水槽内清水流动,数值结果与试验结果吻合良好. 120°弯道内水沙两相流动中固液两相的运动轨迹在弯道直线段基本重合,在弯道内泥沙轨迹逐步偏离水体轨迹,其偏离程度随泥沙粒径增大而增大. 从S型水槽内水沙两相流动计算结果中发现泥沙纵向流速在壁面附近比水流纵向速度大,在远离壁面区域比水流纵向速度小;弯道内泥沙横向流速比水流横向流速小;垂向流速在直线段和泥沙沉速相当,在弯道内受螺旋水流影响而变化;两相流速差别随泥沙粒径增大而变大;泥沙浓度呈现下浓上稀的分布,在弯道内横向断面上呈现凸岸大凹岸小的分布,泥沙浓度随泥沙粒径增大而减小.      

Investigation of the flow and heat transfer of viscous reacting fluids in long tubes

Heat transfer and resistance in the case of laminar flow of inert gases and liquids in a circular tube were considered in [1–4], the justification of the use of boundary-layer type equations for investigating two-dimensional flows in tubes being provided in [4]. The flow of strongly viscous, chemically reacting fluids in an infinite tube has been investigated analytically and numerically in the case of a constant pressure gradient or constant flow rate of the fluid [5–8]. An analytic analysis of the flow of viscous reacting fluids in tubes of finite length was made in [9, 10]. However, by virtue of the averaging of the unknown functions over the volume of the tube in these investigations, the allowance for the finite length of the tube reduced to an analysis of the influence of the time the fluid remains in the tube on the thermal regime of the flow, and the details of the flow and the heat transfer in the initial section of the tube were not taken into account. In [11], the development of chemical reactions in displacement reactors were studied under the condition that a Poiseuille velocity profile is realized and the viscosity does not depend on the temperature or the concentration of the reactant; in [12], a study was made of the regimes of an adiabatic reactor of finite length, and in [13] of the flow regimes of reacting fluids in long tubes in the case of a constant flow rate. The aim of the present paper is to analyze analytically and numerically in the two-dimensional formulation the approach to the regimes of thermal and hydrodynamic stabilization in the case of the flow of viscous inert fluids and details of the flow of strongly viscous reacting fluids.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 17–25, January–February, 1930.     

新中国航空事业的先驱者——张阿舟

张阿舟先生是我国著名的航空工程专家、固体力学家、教育家. 在20世纪后半叶,尤其是在新中国工业化初期的艰苦条件下,他面向我国航空工业发展需求,攻坚克难、培养后学,取得了突出成就. 本文全面回顾张阿舟先生的学术生涯, 介绍他在飞机结构强度、结构动力学、工程动力学反问题三个领域的主要学术贡献, 归纳他的治学特点. 文中介绍了张阿舟先生的航空报国情怀,以丰富的事例说明:他在主持新中国第一架飞机静力试验研究中发挥了核心作用, 在开拓我国飞机结构静/动强度等研究领域中发挥了引领作用, 在培养航空、力学领域的优秀人才中发挥了重要指导作用.      

盐岩储库区地面沉降预测与控制研究现状与展望

利用盐岩地层建设地下油气储库群已成为各国发展能源储备的重要方向,然而关于储库区地面沉降的研究至今仍处于探索阶段。由于地面沉降所造成的重大事故屡见不鲜,因此有必要集中力量研究盐岩库区地面沉降问题,为我国盐岩储库群的建设提供可靠的理论依据。本文主要从以下3个方面总结了近几十年来国内外学者在盐岩储库区地面沉降预测方面所做出的努力与成绩： （1）现场监测——法国、德国、美国先后建立了现场监测网络,获得了大量的长期监测数据;  （2）理论计算——我国学者于20世纪90年代末将随机介质理论引入到盐矿水溶开采地面沉降预测中,从而为储库区地面沉降预测提供了新的理论基础;  （3）数值模拟——欧洲学者利用FLAC2D 程序对盐岩储库区的地面稳定性进行了数值模拟,而我国学者则利用在新概率积分法的基础上建立起的预测模型成功进行了沉降预测模拟。此外,为了有效地控制库区地面变形,预留矿柱式水溶开采法在国外众多盐岩地下储库群建设中得以广泛应用。本文最后提出在后续研究中将重点着眼于地表变形随时间的发展过程,并对现有理论模型进行适当的修正以及利用现场实测数据进一步完善预测所需参数的选取方法,从而使预测结果更为准确可靠。     

跳马项目的三维实时动态测量系统

为跳马项目研究的电测系统中引入数字信号处理的传递函数及频谱分析的方法,采集和处理了因人体冲击三维力对信号的耦合干扰造成的十分复杂的响应信号,具有较高的动态测试精度.可以获得跳马动作的全部运动生物力学参数.现已用于中国国家体操队进行计算机辅助训炼.