Preparation, microstructure, and properties of novel low-κ brominated epoxy/mesoporous silica composites

Brominated epoxy resin (BER) composites containing various amounts of SBA-15 and SBA-16 types mesoporous silicas were prepared through the thermal curing with 3-methyl-tetrahydrophthalic anhydride, and their morphologies, dielectric constants (κ), thermal properties and mechanical properties were studied. The investigation suggested that the dielectric constant could be reduced from 4.09 of the pure thermosetting BER to 3.74 and 3.7 by incorporating 3 wt.% SBA-15 and SBA-16, respectively. The reduction of the dielectric constant is attributed to the incorporation of the air voids (κ = 1) stored within the mesoporous silica materials, the air volume existing in the gaps on the interfaces between the mesoporous silica and the BER matrix, and the free volume created by introducing large-sized domains. The BER/mesoporous silica composites also present stable dielectric constants across the wide frequency range. An improvement of thermal stability of the BER is achieved by incorporation of the mesoporous silica materials. The enhanced interfacial interaction between the surface-modified mesoporous silica and the BER matrix has also led to an improvement of the toughness.     

改性中孔分子筛SBA-16薄膜的合成及表征

在酸性条件下, 以导电玻璃(ITO)为基底合成了SBA-16分子筛膜. 所制备的SBA-16膜孔径均匀, 具有体心立方结构(属于Im3m空间群), SBA-16膜的晶胞参数为18.6 nm. TEM, SEM和XRD等技术研究表明, 加入少量的AlCl₃盐于形成膜的母液并且采用RSiX₃对导电玻璃基底进行处理, 能够明显改善SBA-16膜的连续性而不影响孔结构. 红外(FTIR)研究结果表明, SBA-16膜的表面硅羟基和结晶水很少, 膜很稳定. XPS研究表明, 加入少量MnCl₂对SBA-16膜进行改性, 可以提高膜的导电性.     

介孔载体负载Pt催化剂上α-酮酸酯的不对称氢化

以介孔材料SBA-15、经或未经Al2O3修饰的具有三维立方孔道结构的SiO2为载体,制备了负载型Pt催化剂,并用于催化α-酮酸酯底物2-氧代-4-苯基-丁酸乙酯(EOPB)和丙酮酸乙酯(Etpy)的不对称氢化反应中.结果表明,当SBA-15孔径由6.2,7.6和9.2nm依次增加时,EOPB不对称氢化的活性和手性选择...     

The application of pore size tunable SBA-15 molecular sieves in direct conversion of syngas to ethanol catalyzed by RhCl<Subscript>3</Subscript> and Fe(NO<Subscript>3</Subscript>)<Subscript>3</Subscript>

Four kinds of mesoporous molecular sieve SBA-15 (SBA-15-HCl, SBA-15-HPMo, SBA-15-HPW, and SBA-15-HSiW) were synthesized by different methods or materials. Loaded with RhCl₃ and Fe(NO₃)₃, the SBA-15-HPMo supported catalyst performed well in catalyzing direct conversion of syngas to ethanol.     

Encapsulation hemoglobin in ordered mesoporous silicas: Influence factors for immobilization and bioelectrochemistry

The encapsulation of hemoglobin (Hb) on the mesoporous silicas SBA-15 and Au-doped SBA-15 (Au-SBA-15) has been studied as a model protein adsorption system. The influences of solution pH, structure of mesoporous silicas and gold nanoparticles incorporation on Hb immobilization are investigated in detail. The spectral characteristics of Hb/SBA-15 and Hb/Au-SBA-15 nanoconjugate show an absorption curve quite similar to that of native Hb, indicating that Hb retains its higher-order structure in the mesopores of SBA-15. Direct electrochemistry of Hb is obtained when Hb is adsorpted by mesoporous silicas SBA-15 or Au-SBA-15. Moreover, Hb/Au-SBA-15 exerts enhancing electron transfer ability because of the Au incorporation. Additionally, the Hb/Au-SBA-15 displays good electrocatalytic reduction of hydrogen peroxide with a detection limit of 1.0 μM, about 3 times as low as that for the Hb/SBA-15. The Hb/Au-SBA-15 exhibits higher peroxidase-like activity with the apparent Michaelis–Menton constant (K_m) of 2.87 mM, significantly lower than the 7.78 mM value for the Hb/SBA-15.     

SBA-15的孔壁碳膜修饰对钴基催化剂结构与催化性能的影响

在惰性气体中焙烧SBA-15制得孔壁被碳修饰的SBA- 15C样品,以它和SBA-15为载体,采用等量浸渍法制备了负载型Co基催化剂,并运用X射线衍射、N2物理吸附、程序升温还原、NH3吸附量热等手段对样品进行了表征.结果表明,SBA- 15C仍保持原有的六方有序的中孔结构,但其孔壁经碳修饰后发生增厚,比表面积略有下降...     

Thermal stability of high surface area silicon carbide materials

The synthesis of mesoporous silicon carbide by chemical vapor infiltration of dimethyl dichlorosilane into mesoporous silica SBA-15 and subsequent dissolution of the silica matrix with HF was investigated. The influence of the synthesis parameters of the composite material (SiC/SBA-15) on the final product (mesoporous SiC) was determined. Depending on the preparation conditions, materials with specific surface areas from 410 to 830 m² g⁻¹ and pore sizes between 2 and 10 nm with high mesopore volume (0.31-0.96 cm³ g⁻¹) were prepared. Additionally, the thermal stability of mesoporous silicon carbide at 1573 K in an inert atmosphere (argon) was investigated, and compared to that of SBA-15 and ordered mesoporous carbon (CMK-1). Mesoporous SiC has a much higher thermal textural stability as compared to SBA-15, but a lower stability than ordered mesoporous carbon CMK-1.     

Copolymers with fluorescence properties in mesoporous silica SBA-15:Synthesis and characterization

A novel copolymer with fluorescence properties in mesoporous silica SBA-15 was prepared via a combination of surface-initiated reversible addition-fragmentation chain transfer(RAFT) polymerization and "click" chemistry.A sufficient amount of peroxide groups were introduced into mesoporous silica SBA-15 channel pores and were further used to initiate the RAFT polymerization of styrene and 4-vinylbenzyl azide,resulting in SBA-15 supported polystyrene-co-poly(4-vinylbenzyl azide) copolymer(PS-co-PVBA/SBA-15) hybrid material.The samples were characterized by Fourier transform infrared spectroscopy(FT-IR),transmission electron microscopy(TEM),thermogravimetry analysis(TGA),N_2 adsorption-desorption isotherms and X-ray diffraction(XRD),respectively.The results show that the styrene and 4-vinylbenzyl azide had copolymerized inside mesoporous silica SBA-15.Subsequently,Npropargyl-carbazole(PC) was connected to PS-co-PVBA/SBA-15 hybrid material via "click" reaction,resulting in PS-co-PVBC/SBA-15 with carbazole side groups hybrid material.The fluorescence spectrum is dominated by a broad band from 350 nm to 400 nm in narrow region and the maximum peak is 362 nm,indicating the characteristic absorption of the carbazole group of PS-co-PVBC/SBA-15 hybrid material.     

Immobilization of human carbonic anhydrase on gold nanoparticles assembled onto amine/thiol-functionalized mesoporous SBA-15 for biomimetic sequestration of CO2

A biocatalyst was synthesized by immobilizing human carbonic anhydrase onto gold nanoparticles assembled over amine/thiol-functionalized mesoporous SBA-15. The physicochemical properties of the functionalized mesoporous SBA-15 were obtained by XRD, BET, FE SEM, HR TEM, EDS, and zeta potential analysis. The biocatalytic performance was studied for para-nitrophenyl acetate (p-NPA) hydrolysis. The kinetic parameters K(m) were found to be 22.35 and 27.75 mM, and K(cat)/K(m) values were 1514.09 and 1612.25 M(-1) s(-1) for HCA immobilized on gold nanoparticles assembled on amine/thiol-functionalized mesoporous SBA-15 (HCA/Au/APTES/SBA-15 and HCA/Au/MPTES/SBA-15), respectively. These HCA/Au/APTES/SBA-15 and HCA/Au/MPTES/SBA-15 were investigated for biocatalytic hydration of CO(2) and its precipitation as CaCO(3). The amount of CaCO(3) precipitated over HCA/Au/MPTES/SBA-15 was nearly the same as that precipitated over free HCA. Storage stability and reusability studies suggested that HCA/Au/MPTES/SBA-15 retained its activity even after 20 days storage at 25 °C and 20 recycling runs. The present results demonstrate that HCA/Au/MPTES/SBA-15 and HCA/Au/APTES/SBA-15 are highly efficient potential nanobiocatalysts for industrial-scale CO(2) sequestration.     

Static and dynamic sorption study of heavy metal ions on amino-functionalized SBA-15

Amino-functionalized SBA-15 mesoporous silica (SBA-15-NN) was synthesized using the normal grafting procedure of SBA-15 with [3-(2-Aminoethyl) aminopropyl] trimethoxysilane. Under optimal conditions, SBA-15-NN exhibited a higher adsorption capacity toward metal ions than SBA-15 in static adsorption. The results showed that the flow rate of 2?mL?min^?1 might be the optimum flow rate in dynamic adsorption, and the higher initial metal ion concentration is favorable for the adsorption of Zn(II), Co(II), and Ni(II) onto SBA-15-NN. The results indicated that SBA-15-NN could effectively remove multiple metal ions from aqueous solution as a good adsorption material.     

Fe3O4@mesoporous SBA-15: a robust and magnetically recoverable catalyst for one-pot synthesis of 3,4-dihydropyrimidin-2(1H)-ones via the Biginelli reaction

A magnetic nanoparticle conjugated mesoporous nanocatalyst (Fe(3)O(4)@mesoporous SBA-15) with a high surface area has been synthesized by chemical conjugation of magnetite (Fe(3)O(4)) nanoparticles with functionalized mesoporous SBA-15. Functionalized mesoporous SBA-15 containing surface carboxyl and amino groups was synthesized via the thiol-ene click reaction of cysteine hydrochloride and vinyl functionalized SBA-15. The catalytic activity of the robust, safe and magnetically recoverable Fe(3)O(4)@mesoporous SBA-15 nanocatalyst was evaluated in the Biginelli reaction under mild conditions for the synthesis of a diverse range of 3,4-dihydropyrimidin-2(1H)-ones. The separation and reuse of the Fe(3)O(4)@mesoporous SBA-15 nanocatalyst were simple, effective and economical.     

Synthesis of carboxyl-modified rod-like SBA-15 by rapid co-condensation

Carboxyl-modified SBA-15 rod-like mesoporous materials have been synthesized by a facile rapid co-condensation of tetraethylorthosilicate (TEOS) and 2-cyanoethyltriethoxysilane (CTES), followed by hydrolysis of cyanide groups in sulfuric acid. The concentration of carboxylic groups was varied by changing the silica source ratio of CTES/TEOS from 0.05 to 0.3. X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed that the uniform ordered mesoporous structure and rod-like morphology of SBA-15 have been preserved even at the high concentration of carboxylic groups employed. Characterization by Fourier transformed infrared spectroscopy (FTIR), solid-state NMR investigation indicated that carboxylic groups have been successfully grafted onto the surface of SBA-15 through siloxane bonds [(O(3))SiCH(2)CH(2)COOH. The negative charges of the modified SBA-15 materials were enhanced by the presence of the carboxylic groups on the surface. The capacity of lysozyme adsorption of the modified SBA-15 materials were found to be significantly improved as compared with pure silica SBA-15. The maximum amount of lysozyme adsorption on carboxyl-modified was increased with the pH of solution increased from 5.5 to 9.0.     

Influence of mesoporous structure type on the controlled delivery of drugs: release of ibuprofen from MCM-48, SBA-15 and functionalized SBA-15

Ordered mesoporous materials exhibit potential features to be used as controlled drug delivery systems, including their wide range of chemical compositions and their outstanding textural and structural properties. Therefore, it is possible to control the drug release kinetics by tailoring such parameters. In this paper, mesoporous materials such as MCM-48 and SBA-15, which present different pore sizes (3.7 and 8.8 nm) and structural characteristics (3D-bicontinuous cubic and 2D-hexagonal, respectively) have been synthesized to evaluate their application as drug delivery system and to determine their influence on release kinetic of ibuprofen. Moreover, a chemical modification of the SBA-15 mesoporous material with octadecyltrimethoxysilane has also been performed to study its influence on the release rate of ibuprofen. The structural characteristics (3D cubic and 2D hexagonal pore system) do not affect the release kinetic profiles of ibuprofen. On the contrary, the pore size affects highly to the release kinetic profiles from first-order kinetic to zero-order kinetic for MCM-48 and SBA-15, respectively. Moreover, the importance of surface functionalization was demonstrate through the very fast delivery of ibuprofen from SBA-15 mesoporous materials functionalized with octadecyl chains.     

孔壁部分有序化的介孔二氧化硅材料的合成与表征

采用一种“改进的二次晶化”的方法处理介孔二氧化硅SBA-15. 用X射线衍射(XRD)、 透射电镜(TEM)、 电子衍射(ED)、 红外光谱(FTIR)以及固体核磁共振(NMR)等多种技术对样品进行了表征.　结果表明， 在所得样品的孔壁中, 原子的排列方式与普通介孔二氧化硅材料的孔壁不同， 显示一定程度的有序性. 同时, 高度有序的介孔结构得到很好的保持, 且样品的水热稳定性大幅度提高.     

Deep oxidative desulfurization of fuels catalyzed by molybdovanadophosphoric acid on amino-functionalized SBA-15 using hydrogen peroxide as oxidant

This study reports the usage of molybdovanadophosphoric acid catalyst on amino-functionalized SBA-15(PMoV₂/SBA-15-NH₂) for the removal of sulfur from model oil (dibenzothiophene dissolved in n-hexane). To increase the tendency for adsorption of heteropoly acids, mesoporous SBA-15 silica was functionalized with amino groups by postsynthesis grafting, using 3-aminopropyltrimethoxy silane as the coupling agent. Immobilization of molybdovanadophosphoric acid on pure SBA-15 (PMoV₂/SBA-15) was also studied for comparison and the catalysts were characterized by physicochemical and spectroscopic methods. It was found that the catalysts exhibit high catalytic activities and PMoV₂/SBA-15-NH₂ is more durable than PMoV₂ impregnated on unmodified mesoporous SBA-15 silica. The results may bring about improvement for oxidative desulfurization of transportation fuels.     

Synthesis, characterization, and luminescence properties of the ternary europium complex covalently bonded to mesoporous SBA-15

A novel mesoporous SBA-15 type of hybrid material (phen-SBA-15) covalently bonded with 1,10-phenanthroline (phen) ligand was synthesized by co-condensation of tetraethoxysilane (TEOS) and the chelate ligand 5-[N,N-bis-3-(triethoxysilyl)propyl]ureyl-1,10-phenanthroline (phen-Si) in the presence of Pluronic P123 surfactant as a template. The preservation of the chelate ligand structure during the hydrothermal synthesis and the surfactant extraction process was confirmed by Fourier transform infrared (FTIR) and (29)Si MAS NMR spectroscopies. SBA-15 consisting of the highly luminescent ternary complex Eu(TTA)(3)phen (TTA = 2-thenoyltrifluoroacetone) covalently bonded to a silica-based network, which was designated as Eu(TTA)(3)phen-SBA-15, was obtained by introducing the Eu(TTA)(3).2H(2)O complex into the hybrid materials via a ligand exchange reaction. XRD, TEM, and N(2) adsorption measurements were employed to characterize the mesostructure of Eu(TTA)(3)phen-SBA-15. For comparison, SBA-15 doped with Eu(TTA)(3).2H(2)O and Eu(TTA)(3)phen complexes and SBA-15 covalently bonded with a binary europium complex with phen ligand were also synthesized, and were named SBA-15/Eu(TTA)(3), SBA-15/Eu(TTA)(3)phen, and Eu-phen-SBA-15, respectively. The detailed luminescence studies on all the materials showed that, compared with the doping sample SBA-15/Eu(TTA)(3)phen and binary europium complex functionalized sample Eu-phen-SBA-15, the Eu(TTA)(3)phen-SBA-15 mesoporous hybrid material exhibited higher luminescence intensity and emission quantum efficiency. Thermogravimetric analysis on Eu(TTA)(3)phen-SBA-15 demonstrated that the thermal stability of the lanthanide complex was evidently improved as it was covalently bonded to the mesoporous SBA-15 matrix.     

Amino acid adsorption on mesoporous materials: influence of types of amino acids, modification of mesoporous materials, and solution conditions

In order to disclose the dominant interfacial interaction between amino acids and ordered mesoporous materials, the adsorption behaviors of five amino acids on four mesoporous materials were investigated in aqueous solutions with adjustable amino acid concentration, ion strength, and pH. The selected amino acids were acidic amino acid glutamic acid (Glu), basic amino acid arginine (Arg), and neutral amino acids phenylalanine (Phe), leucine (Leu), and alanine (Ala), and the selected mesoporous materials were SBA-15, Al-SBA-15, CH3(10%)-SBA-15, and CH3(20%)-SBA-15. The adsorption capacities of Glu and Arg were strongly dependent on pH and surface charge of the mesoporous adsorbent. The adsorption of Phe showed pH insensitivity but depended on the surface organic functionalization of mesoporous adsorbent. On the basis of the theoretical analysis about the interaction between amino acid and adsorbent, such a remarkable difference was attributed to the different nature of the interaction between amino acid and adsorbent. Arg could be readily adsorbed on the surface of SBA-15, especially Al-SBA-15, under appropriate pH in which the electrostatic interaction was predominant. The driving force of Phe adsorption on mesoporous adsorbent mainly came from the hydrophobic interaction. Therefore, the adsorption capability of Arg decreased with increasing ion strength of solution, while the adsorption capability of Phe increased with the increasing degree of CH3 functionalization on SBA-15. For neutral amino acid Phe, Ala, and Leu, the adsorption capability increased with the increase of the length of their side chains, which was another evidence of hydrophobic effect. Thus, all the adsorption of amino acids on mesoporous silica materials can be decided by the combined influence of two fundamental interactions: electrostatic attraction and hydrophobic effect.     

FexOy/SBA-15介孔分子筛的合成以及性能研究

在酸性溶液中利用溶胶凝胶-pH值控制两步法直接合成Fe_xO_y/SBA-15介孔分子筛，同时利用场发射扫描电子显微镜(FESEM)、小角度X射线衍射(Low-angle XRD)、透射电子显微镜(TEM)以及振动样品磁强计(VSM)对制备的各种SBA-15介孔分子筛进行结构以及性能的测试、表征。结果显示Fe_xO_y均匀地分散在SBA-15的骨架中，而且会对SBA-15介孔分子筛起钉轧作用。而后着重研究了Fe_xO_y的加入对SBA-15介孔分子筛的热稳定性、催化特性以及磁学性能的影响。Fe_xO_y的引入可以增加制备的SBA-15介孔分子筛的热稳定性;Fe_xO_y的引入可以改善SBA-15介孔分子筛的催化活性，得到了开口的、石墨化程度较好的纳米碳管。Fe_xO_y的引入使SBA-15介孔分子筛具有明显的铁磁性。     

Synthesis of highly ordered mesoporous crystalline WS(2) and MoS(2) via a high-temperature reductive sulfuration route

A high-temperature reductive sulfuration method is demonstrated to synthesize highly ordered mesoporous metal sulfide crystallites by using mesoporous silica as hard templates. H2S gas is utilized as a sulfuration agent to in situ convert phosphotungstic acid H3PW12O40.6H2O to hexagonal WS2 crystallites in the silica nanochannels at 600 degrees C. Upon etching silica, mesoporous, layered WS2 nanocrystal arrays are produced with a yield as high as 96 wt %. XRD, nitrogen sorption, SEM, and TEM results reveal that the WS2 products replicated from the mesoporous silica SBA-15 hard template possess highly ordered hexagonal mesostructure (space group, p6mm) and rodlike morphology, analogous to the mother template. The S-W-S trilayers of the WS2 nanocrystals are partially oriented, parallel to the mesochannels of the SBA-15 template. This orientation is related with the reduction of the high-energy layer edges in layered metal dichalcogenides and the confinement in anisotropic nanochannels. The mesostructure can be 3-D cubic bicontinuous if KIT-6 (Iad) is used as a hard template. Mesoporous WS2 replicas have large surface areas (105-120 m2/g), pore volumes ( approximately 0.20 cm3/g), and narrow pore size distributions ( approximately 4.8 nm). By one-step nanocasting with the H3PMo12O40.6H2O (PMA) precursor into the mesochannels of SBA-15 or KIT-6 hard template, highly ordered mesoporous MoS2 layered crystallites with the 2-D hexagonal (p6mm) and 3-D bicontinuous cubic (Iad) structures can also be prepared via this high-temperature reductive sulfuration route. When the loading amount of PMA precursor is low, multiwalled MoS2 nanotubes with 5-7 nm in diameter can be obtained. The high-temperature reductive sulfuration method is a general strategy and can be extended to synthesize mesoporous CdS crystals and other metal sulfides.     

介孔Fe/SBA-15非均相芬顿氧化水中难降解染料罗丹明B

以介孔二氧化硅SBA-15 为载体, 采用等体积浸渍法制备了Fe/SBA-15. 通过X射线衍射(XRD)、N₂吸附-脱附、扫描电镜(SEM)、透射电镜(TEM)和X射线光电子能谱(XPS)等技术对其进行了表征, 并用于对水溶液中罗丹明B (RhB)的芬顿氧化. 表征结果表明了Fe/SBA-15维持了长程有序的介孔结构, 孔径和比表面积都有所下降, 并呈现棒状体的聚集态, 平均直径为0.6 μm. Fe 以α-Fe₂O₃的形态同时存在于介孔孔道内外. 在Fe/SBA-15 和H₂O₂同时存在条件下RhB的去除是吸附和催化氧化降解的协同作用所致, 并且与Fe/SBA-15 投加量密切相关, 但与初始溶液pH 几乎无关. 当Fe/SBA-15 投加量为0.15 g·L^-1, RhB 初始浓度为10.0 mg·L^-1,H₂O₂/Fe³⁺摩尔比为2000:1,初始溶液pH为5.4和反应温度为21 ℃时, RhB去除率达到了93%. Fe/SBA-15的Langmiur 单分子层饱和吸附量为99.11 mg·g^-1. 此外, 采用H₂O₂浸泡方式对使用过的Fe/SBA-15可进行再生,连续6 次循环使用后仍可维持80%的RhB去除率, 且每次使用后Fe浸出浓度都在0.1 mg·L^-1 (或者0.6% (质量分数))以下. 基于淬灭实验、UV-Vis 光谱和气相色谱-质谱(GC-MS)联用仪分析的结果, 提出了RhB的去除机理. 非均相芬顿催化剂Fe/SBA-15可用于去除像RhB这样的生物难降解有机物.