Electron transfer of plurimodified DNA SAMs

An STM-based current-voltage (I/V) investigation of deoxyribonucleic acid (DNA) 18 base pair (bp) oligonucleotide monolayers on gold is presented. Three bases of each of the immobilized and complementary strands were modified with either iodine or phenylethylene moieties. The oligonucleotides were immobilized on template stripped gold (tsg) surfaces and characterized by atomic force microscopy (AFM) and scanning tunneling microscopy (STM). AFM imaging showed that monolayers of the expected height were formed. A comparative study of normal, halogenated, and phenyl-modified DNA was made with the STM in tunneling spectroscopy (TS) mode. I/V spectroscopic measurements in the range +/-250 mV on both single- and double-stranded (ds) DNA monolayers (modified and unmodified) showed that for negative substrate bias (U(sub)) electron transfer is more efficient through a phenyl-modified monolayer than through normal or halogenated DNA. This effect was particularly clear below a threshold bias of -100 mV. For positive U(sub), unmodified ds DNA was found to conduct slightly better than the modified strands. This is presumably caused by greater order in the unmodified versus modified DNA monolayers. Modifications on the immobilized (thiolated) strand seem to improve electron transport through the DNA monolayer more than modifications on the complementary (not surface-bound) strand.     

Fabricating protein immunoassay arrays on nitrocellulose using dip-pen lithography techniques

Advancements in lithography methods for printing biomolecules on surfaces are proving to be potentially beneficial for disease screening and biological research. Dip-pen nanolithography (DPN) is a versatile micro and nanofabrication technique that has the ability to produce functional biomolecule arrays. The greatest advantage, with respect to the printing mechanism, is that DPN adheres to the sensitive mild conditions required for biomolecules such as proteins. We have developed an optimised, high-throughput printing technique for fabricating protein arrays using DPN. This study highlights the fabrication of a prostate specific antigen (PSA) immunoassay detectable by fluorescence. Spot sizes are typically no larger than 8 μm in diameter and limits of detection for PSA are comparable with a commercially available ELISA kit. Furthermore, atomic force microscopy (AFM) analysis of the array surface gives great insight into how the nitrocellulose substrate functions to retain protein integrity. This is the first report of protein arrays being printed on nitrocellulose using the DPN technique and the smallest feature size yet to be achieved on this type of surface. This method offers a significant advance in the ability to produce dense protein arrays on nitrocellulose which are suitable for disease screening using standard fluorescence detection.     

Morphology-controlled fabrication of polygonal ZnO nanobowls templated from spherical polymeric nanowell arrays

We report a facile and effective strategy for synthesizing morphology-controlled patterned ZnO nanostructures. Polymeric nanowell arrays were employed as scaffold templates, followed by solution dipping and calcination process, polygonal ZnO nanobowl structures were fabricated on silicon substrate. The ordered polymeric nanowell arrays not only provided confined areas for depositing desired materials, but also induced shape transition of ZnO nanobowls from circular to polygonal. The morphology of the patterned ZnO nanostructures can be easily controlled by tuning parameters of polymeric nanowell arrays and other treatment conditions. The patterned structures were characterized by field emission scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD) and thermogravimetric analysis (TGA).     

Dip-pen刻蚀技术直接构建聚-L-赖氨酸纳米结构

Dip-pen纳米刻蚀技术(简称DPN技术)为在目标基底上沉积一个有序或连续的图案提供了一条简单而有效的途径,DPN技术是一种直接书写的扫描探针刻蚀技术,它使用原子力显微镜探针针尖,在一定的驱动力下,直接将化学试剂“墨水”转移到目标基底上．近年来,利用DPN技术已经成功地实现了多种“墨水一基底”组合。     

Synthesis and adsorption of shape-persistent macrocycles containing polycyclic aromatic hydrocarbons in the rigid framework

Shape-persistent macrocycles with interiors in the nanometer regime were prepared by the oxidative cyclization of the appropriate bisacetylene precursors under high-dilution conditions. These compounds contain polycyclic aromatic hydrocarbons in the ring backbone and are decorated with extra annular oligoalkyl or silyl side groups. Interestingly, after depositing them on different surfaces and investigating the self-assembled structures by means of scanning tunneling microscopy (STM) and atomic force microscopy (AFM), various nanostructures were observed. STM showed that these macrocycles are organized in two-dimensional (2D) layers, whereas AFM showed, in addition, the formation of 2D crystallites and one-dimensional fibrils. These results reveal the importance of the extra annular substitution of the macrocycles in creating patterned surfaces and nanoscale objects.     

Mixed self-assembled monolayers of semirigid tetrahydro-4H-thiopyran end-capped oligo(cyclohexylidenes)

Single-component and mixed self-assembled monolayers (SAMs) of one- and three-ring semirigid tetrahydro-4H-thiopyran end-capped oligo(cyclohexylidenes)-that is, thiopyran (1), 4-(4-cyclohexylidene-cyclohexylidene)tetrahydro-4H-thiopyran (2), and 4-(tetrahydro-4H-thiopyran-4-cyclohexylidene-4'-ylidene)tetrahydro-4H-thiopyran (3)--on Au(111) substrates have been prepared and studied by cyclic voltammetry (CV), atomic force microscopy (AFM), and scanning tunneling microscopy (STM). It was found that the shortest adsorbate 1 more readily forms a SAM than 2 or 3. Notwithstanding, the SAMs of 2 or 3 are thermodynamically more stable due to favorable intermolecular attractions. Holes were made with the AFM tip establishing tilt angles of 30-50 degrees with respect to the surface normal for all SAMs. STM imaging showed well-ordered, line-shaped packing patterns with molecular resolution for the SAM of 2. Similar patterned structures were not observed for 1 and 3. Mixed SAMs were prepared by exposing a SAM of 1 to ethanol solutions of either 2 or 3. STM imaging revealed that domains of molecules of 2 or 3 amidst a monolayer of 1 are formed in both cases. Whereas in the mixed SAM of 1 and 2 the domains are irregularly shaped, circular islands of uniform size are found in the mixed SAM of 1 and 3.     

Formation of heterocaryotic and homonuclear bridged–dimeric complexes on surface

The formation of coordinated dimeric complexes bridged by axial ligands on surface is observed with the help of a 1,3,5-tris(10-carboxydecyloxy)benzene(TCDB) template through scanning tunneling microscopy(STM). STM images of molecular adlayers of zinc tetraphenylporphyrin(Zn TPP), zinc phthalocyanine(Zn Pc), and their mixture are reported. Zn TPP and Zn Pc can spontaneously form highly an ordered structure with a 1:1 molar ratio, which is different from that of individual Zn Pc. The coordinated bimolecular complexes bridged with axial ligands, simply as Zn Pc–DPP–Zn TPP and Zn Pc–DPE–Zn Pc, are presented and the corresponding surface structures are compared. Zn Pc and Zn TPP can be connected by an axial ligand DPP and formed assembled structures out of surface. Two types of arrays with entirely new structure are obtained for the Zn Pc–DPE–Zn Pc complex. These bridged hybrid complexes provide an example of design of self-organized crystals on the basis of coordination through non-covalent interactions.     

Adsorption and desorption processes of self-assembled monolayers studied by surface-sensitive microscopy and spectroscopy

Adsorption and desorption processes of self-assembled monolayers (SAMs) have been studied on an Au(111) surface by scanning tunnelling microscopy (STM), atomic force microscopy (AFM), X-ray photo-electron spectroscopy (XPS) and thermal desorption spectroscopy (TDS). At the initial growth stage, the ordered nucleation of SAM located at the herringbone turns of the Au(111) − (22 × √3) surface reconstruction and diffusion-controlled domain formation have been imaged by STM and AFM. Details of the oxidation process in UV desorption were also investigated by XPS. In addition, the dimerization reaction during desorption was confirmed by TDS for the first time in the alkanethiol SAM system.     

Dip-pen nanolithography of reactive alkoxysilanes on glass

The use of organofunctional silane chemistry is a flexible and general method for immobilizing biomolecules on silicon oxide surfaces, including fabricating DNA, small-molecule, and protein microarrays. The biggest hurdle in employing dip-pen nanolithography (DPN) for extending this general approach to the nanoscopic domain is the tendency of trialkoxy- and trichlorosilanes to rapidly polymerize due to hydrolysis reactions. The control of the local water concentration between the substrate surface and the scanning AFM tip is critical, both to the physical and chemical processes involved in DPN writing and to the ability to form well-defined thin layers of reactive silanes without extensive polymerization induced disorder. We found that we could control the degree of polymerization through careful choice of the alkoxysilane used as the "ink" for DPN and through control of the relative humidity during inking and writing with the coated AFM tip. As a proof-of-principle, we demonstrate that areas patterned with an alkoxysilane on glass with DPN are functional for subsequent immobilization of fluorescently labeled streptavidin via covalent attachment of biotin. This preliminary result sets the stage for the ability to capture proteins in their fully hydrated state from buffered solution, by molecular recognition onto previously written reactive nanoscopic regions on oxidized silicon and glass.     

Peptides on GaAs surfaces: comparison between features generated by microcontact printing and dip-pen nanolithography

Atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared reflection absorption spectroscopy (FT-IRRAS) were employed to understand the size, composition, and conformation of lithographic patterns composed of peptide molecules. GaAs surfaces were patterned by microcontact printing (microCP) and dip-pen nanolithography (DPN) using a peptide sequence composed of 15 amino acids. The detailed surface evaluation showed that the patterns have similar chemical compositions but differ in the bonding among the molecules anchored on the GaAs substrate. Both types of patterns were crystalline-like in nature. The features created by DPN exhibited interchain hydrogen bonding, while the ones generated by microCP displayed non-hydrogen bonding. The differences in the lithographic structures can be utilized in future biorecognition experiments that take advantage of the electronic properties of the GaAs substrate and the tunable behavior of the covalently anchored biomolecules on the surface.     

Supramolecular nanopatterns self-assembled by adenine-thymine quartets at the liquid/solid interface

By means of scanning tunneling microscopy (STM), we have observed for the first time well-ordered supramolecular nanopatterns formed by mixing two complementary DNA bases: adenine (A) and thymine (T), respectively, at the liquid/solid interface. By mixing A and T at a specific mixing molar ratio, cyclic structures that were distinctly different from the structures observed by the individual base molecules separately were formed. From an interplay between the STM findings and self-consistent charge density-functional based tight-binding (SCC-DFTB) calculation method, we suggest formation of A-T-A-T quartets constructed on the basis of A-T base pairing. The formation of the A-T-A-T quartets opens new avenues to use DNA base pairing as a way to form nanoscale surface architecture and biocompatible patterned surfaces particularly via host-guest complexation that might be suitable for drug design, where the target can be trapped inside the cavities of the molecular containers.     

Dynamic combinatorial olefin metathesis: templated synthesis of porphyrin boxes

A porphyrin macrocyclic square is efficiently prepared by a dynamic combinatorial approach to olefin metathesis and shown by scanning tunneling microscopy (STM) to self-assemble into highly ordered arrays on a graphite surface.     

Single-molecule chemistry and physics explored by low-temperature scanning probe microscopy

It is well known that scanning probe techniques such as scanning tunnelling microscopy (STM) and atomic force microscopy (AFM) routinely offer atomic scale information on the geometric and the electronic structure of solids. Recent developments in STM and especially in non-contact AFM have allowed imaging and spectroscopy of individual molecules on surfaces with unprecedented spatial resolution, which makes it possible to study chemistry and physics at the single molecule level. In this feature article, we first review the physical concepts underlying image contrast in STM and AFM. We then focus on the key experimental considerations and use selected examples to demonstrate the capabilities of modern day low-temperature scanning probe microscopy in providing chemical insight at the single molecule level.     

Supramolecular assembly on surfaces: manipulating conductance in noncovalently modified mesoscale structures

Molecules capable of complementary hydrogen bonding were used to control the noncovalent self-assembly and electronic properties of a chemically well-defined surface mesostructure. In this work, we patterned a footprint region for molecular assembly on a surface and used moieties featuring complementary recognition to tune the current-voltage properties of the patterned region. With the appropriate functionalities on the complementary moieties, we were able to increase and decrease the observed conductance in surface-bound mesoscale structures imaged by scanning tunneling microscopy (STM).     

Label-free oligonucleotide detection method based on a new L-cysteine-dihydroartemisinin complex electroactive indicator

A novel base-mismatched oligonucleotide assay method based on label-free electrochemical biosensor was developed, in which the L-cysteine (Cys)-dihydroartemisinin (DHA) complex was used as a new electroactive indicator. In DNA sensor, Cys-DHA complex was initially formed on electrode surface by cathodic scanning, and target oligonucleotide was conjugated with Cys-terminated DHA indicator through electrostatic interaction under optimal pH. The subsequent sequence assay was responsive to hybridization recognition, which target oligonucleotide was captured by the surface-anchored DNA/Cys-DHA probe. The electrochemical signals of biosensor before and after hybridization were compared basing the measurements of semi-derivative linear scan voltammetry (SDLSV) and electrochemical impedance spectroscopy (EIS). On the basis of signal amplification of electroactive indicator and specific recognition of DNA probe, five target oligonucleotides with different mismatched bases were assayed, and a detection limit reached 0.3 nM. Furthermore, atomic force microscopy (AFM) was used to visually characterize specific recognition spots of biosensor at nanoscale. This study demonstrated a new electroactive molecule-based, biomolecule-involved electroactive indicator and its application in recognition and detection of complementary and base-mismatched oligonucleotide.     

DNA-templated self-assembly of protein and nanoparticle linear arrays

Self-assembling DNA tiling lattices represent a versatile system for nanoscale construction. Self-assembled DNA arrays provide an excellent template for spatially positioning other molecules with increased relative precision and programmability. Here we report an experiment using a linear array of DNA triple crossover tiles to controllably template the self-assembly of single-layer or double-layer linear arrays of streptavidin molecules and streptavidin-conjugated nanogold particles through biotin-streptavidin interaction. The organization of streptavidin and its conjugated gold nanoparticles into periodic arrays was visualized by atomic force microscopy and scanning electron microscopy.     

EC STM investigations of corrosion due to chloride solutions on thin CrN coatings

The focus of the investigations presented is to evaluate local alterations caused by chloride ions affecting thin, magnetron-sputtered CrN layers. Scanning-probe microscopy and analysis techniques are used for this estimation. Thin CrN layers were deposited by reactive magnetron sputtering. They were investigated in electrochemical scanning tunnelling microscopy (EC STM) by cyclic voltammetry in 1 mol L(-1) NaCl. Simultaneously, the surface topography changes were recorded with STM.Above 100 mV the anodic oxidation leads to formation of chromium(III) hydroxide and at sample potentials above 350 mV oxidation of Cr(OH)(2) and Cr(OH)(3) towards chromium(VI) as a soluble chromate starts. Transpassive dissolution of the coating takes place above 900 mV. Yellow colour of the electrolyte is a visible sign for the formation of chromium(VI). Changes of the surface topography indicate the formation of surface layers at anodic potentials. At cathodic potentials increase in current is measured due to the reduction of chromium(III) hydroxide to divalent chromium and metallic chromium. Roughness of surface topography increases.Follow-up explorations with scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), atomic-force microscopy (AFM), scanning tunnelling microscopy/scanning tunnelling spectroscopy (STM/STS) and X-ray photoelectron spectroscopy (XPS) not only evidence the formation of various chromium oxides, but also indicate the existence of chromium hydroxide.     

Pinhole‐free large‐grained atomically smooth Au(111) substrates prepared by flame‐annealed template stripping

High‐quality atomically flat substrates are critical for the analysis and imaging of surface‐mounted ultrathin films and nanostructures. Here we report significant improvement in the preparation of large areas of atomically smooth Au(111) substrates. A thin layer of gold on silicon is flame‐annealed in air and then stripped from the template. The substrates were analyzed with X‐ray diffraction and high‐resolution atomic force microscopy (AFM). In contrast to the previously reported template stripped gold (TSG) substrates, flame‐annealed template stripped substrates reveal no detectable pinholes. The substrate surface is atomically smooth with most grains being larger than 1 µm². The entire procedure requires less than 2 h and uses readily available materials and common laboratory equipment. The resulting substrates can be stored for longer periods of time and then used immediately without need for common cleaning procedures. Evidence is provided that self‐assembled monolayers on these substrates are higher quality than those prepared with previously reported gold substrates. Copyright © 2008 John Wiley & Sons, Ltd.     

Geometric properties of covalently bonded DNA on single-crystalline diamond

Diamond is a promising candidate for bioapplications. Properties of hybridized DNA arrays on single-crystalline diamond are studied on a microscopic level by atomic force microscopy (AFM) in buffer solutions. Compact DNA layers in a thickness of 76 A are resolved by optimizing phase and height contrast in AFM. The height shows some long-range (30 nm) undulations of +/-5 A due to tip and DNA interactions. The axis of double helix DNA is oriented at about 36 degrees with respect to the diamond surface. DNA molecules can be removed by contact-mode AFM with forces >45 nN, indicating stronger DNA bonding than on gold substrates.     

Moving beyond molecules: patterning solid-state features via dip-pen nanolithography with sol-based inks

Herein, we described a new dip-pen nanolithography (DPN)-based method for the direct patterning of organic/inorganic composite nanostructures on silicon and oxidized silicon substrates. The approach works by the hydrolysis of metal precursors in the meniscus between an AFM tip and a surface according to the reaction 2MCln + nH2O --> M2On + 2nHCl; M = Al, Si, and Sn. The inks are hybrid composites of inorganic salts with amphiphilic block copolymer surfactants. Three proof-of-concept systems involving Al2O3, SiO2, and SnO2 nanostructures on silicon and silicon oxide surfaces have been studied. Arrays of dots and lines can be written easily with control over feature size and shape on the sub-200 nm level. The structures have been characterized by atomic force microscopy, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray analysis. This work is important because it opens up the opportunity for using DPN to deposit solid-state materials rather than simple organic molecules onto surfaces with the resolution of an AFM without the need for a driving force other than chemisorption (e.g., applied fields).