A Kinetic and Mechanistic Study on Substitution of Aqua Ligands from <Emphasis Type="Italic">cis</Emphasis>-diaqua-<Emphasis Type="Italic">bis</Emphasis>-(bipyridyl)-ruthenium(II) Complex by Thiosemicarbazide in Aqueous Medium

The kinetics of the interaction of thiosemicarbazide with cis-[Ru(bipy)₂(H₂O)₂]²⁺ (bipy = α α′-bipyridyl) have been studied spectrophotometrically as a function of [Ru(bipy)₂(H₂O)₂²⁺], [bipyridyl] and temperature, at a particular pH (4.8), where the substrate complex exists predominantly as the diaqua species and thiosemicarbazide as the neutral ligand. The reaction proceeds via an outer sphere association complex formation, followed by two slow consecutive steps. The first is the conversion of the aforementioned complex into the inner sphere complex, and the second step involves the entrance of another thiosemicarbazide molecule in the coordination zone of Ru(II) whereby, in each step, an aqua ligand is replaced. The association equilibrium constant (K_E) for the outer sphere complex formation has been evaluated together with rate constants for the two subsequent steps. Activation parameters have been calculated for both steps using the Eyring equation (ΔH₁^# = 25.37±1.6 kJ mol⁻¹, ΔS₁^# = −215.48 ± 4.5 J K⁻¹ mol⁻¹, ΔH₂^# = 24.24 ± 1.1 kJ mol⁻¹, ΔS₂^# = −207.14 ± 3.0 J K⁻¹ mol⁻¹). The low enthalpy of activation and large negative value of entropy of activation indicate an associative mode of activation for both aqua ligand substitution processes. From the temperature dependence of K_E, the thermodynamic parameters calculated are: ΔH⁰ = 10.75±0.54 kJ mol⁻¹ and ΔS⁰ = 84.67 ± 1.75 J K⁻¹ mol⁻¹, which give a negative ΔG⁰ value at all temperatures studied, supporting the spontaneous formation of an outersphere association complex prior to the first step.     

Thermochemical study of the solid complex Ho(PDC)3 (o-phen)

A novel solid complex, formulated as Ho(PDC)₃ (o-phen), has been obtained from the reaction of hydrate holmium chloride, ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen·H₂O) in absolute ethanol, which was characterized by elemental analysis, TG-DTG and IR spectrum. The enthalpy change of the reaction of complex formation from a solution of the reagents, Δ_rH_m^θ (sol), and the molar heat capacity of the complex, c_m, were determined as being –19.161±0.051 kJ mol^–1 and 79.264±1.218 J mol^–1 K^–1 at 298.15 K by using an RD-496 III heat conduction microcalorimeter. The enthalpy change of complex formation from the reaction of the reagents in the solid phase, Δ_rH_m^θ(s), was calculated as being (23.981±0.339) kJ mol^–1 on the basis of an appropriate thermochemical cycle and other auxiliary thermodynamic data. The thermodynamics of reaction of formation of the complex was investigated by the reaction in solution at the temperature range of 292.15–301.15 K. The constant-volume combustion energy of the complex, Δ_cU, was determined as being –16788.46±7.74 kJ mol^–1 by an RBC-II type rotating-bomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_cH_m^θ, and standard enthalpy of formation, Δ_fH_m^θ, were calculated to be –16803.95±7.74 and –1115.42±8.94 kJ mol^–1, respectively.     

Heat capacities and absolute entropies of UTi<Subscript>2</Subscript>O<Subscript>6</Subscript> and CeTi<Subscript>2</Subscript>O<Subscript>6</Subscript>

Summary As part of a larger study of the physical properties of potential ceramic hosts for nuclear wastes, we report the molar heat capacity of brannerite (UTi₂O₆) and its cerium analog (CeTi₂O₆) from 10 to 400 K using an adiabatic calorimeter. At 298.15 K the standard molar heat capacities are (179.46±0.18) J K^-1 mol^-1 for UTi₂O₆ and (172.78±0.17) J K^-1 mol^-1 for CeTi₂O₆. Entropies were calculated from smooth fits of the experimental data and were found to be (175.56±0.35) J K^-1 mol^-1 and (171.63±0.34) J K^-1 mol^-1 for UTi₂O₆ and CeTi₂O₆, respectively. Using these entropies and enthalpy of formation data reported in the literature, Gibb’s free energies of formation from the elements and constituent oxides were calculated. Standard free energies of formation from the elements are (-2814.7±5.6) kJ mol^-1 for UTi₂O₆ and (-2786.3±5.6) kJ mol^-1 for CeTi₂O₆. The free energy of formation from the oxides at T=298.15 K are (-5.31±0.01) kJ mol^-1 and (15.88±0.03) kJ mol^-1 for UTi₂O₆ and CeTi₂O₆, respectively.     

Thermochemistry of europium and dithiocarbamate complex Eu(C5H8NS2)3(C12H8N2)

A solid complex Eu(C₅H₈NS₂)₃(C₁₂H₈N₂) has been obtained from reaction of hydrous europium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen⋅H₂O) in absolute ethanol. IR spectrum of the complex indicated that Eu³⁺ in the complex coordinated with sulfur atoms from the APDC and nitrogen atoms from the o-phen. TG-DTG investigation provided the evidence that the title complex was decomposed into EuS. The enthalpy change of the reaction of formation of the complex in ethanol, Δ_r H _m ^θ(l), as –22.214±0.081 kJ mol^–1, and the molar heat capacity of the complex, c _m, as 61.676±0.651 J mol^–1 K^–1, at 298.15 K were determined by an RD-496 III type microcalorimeter. The enthalpy change of the reaction of formation of the complex in solid, Δ_r H _m ^θ(s), was calculated as 54.527±0.314 kJ mol^–1 through a thermochemistry cycle. Based on the thermodynamics and kinetics on the reaction of formation of the complex in ethanol at different temperatures, fundamental parameters, including the activation enthalpy (ΔH _≠ ^θ), the activation entropy (ΔS _≠ ^θ), the activation free energy (ΔG _≠ ^θ), the apparent reaction rate constant (k), the apparent activation energy (E), the pre-exponential constant (A) and the reaction order (n), were obtained. The constant-volume combustion energy of the complex, Δ_c U, was determined as –16937.88±9.79 kJ mol^–1 by an RBC-II type rotating-bomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_c H _m ^θ, and standard enthalpy of formation, Δ_f H _m ^θ, were calculated to be –16953.37±9.79 and –1708.23±10.69 kJ mol^–1, respectively.     

Heat capacity and magnetic phase transition of two-dimensional metal-assembled complex (NEt<Subscript>4</Subscript>)[{Mn<Superscript>III</Superscript>(salen)}<Subscript>2</Subscript>Fe<Superscript>III</Superscript>(CN)<Subscript>6</Subscript>]

Summary Heat capacity measurements of the two-dimensional metal-assembled complex, (NEt₄)[{Mn^III(salen)}₂Fe^III(CN)₆] [Et=ethyl, salen= N,N’-ethylenebis(salicylideneaminato) dianion], were performed in the temperature range between 0.2 and 300 K by adiabatic calorimetry. A ferrimagnetic phase transition was observed at T_c1=7.51 K. Furthermore, another small magnetic phase transition appeared at T_c2=0.78 K. Above T_c1, a heat capacity tail arising from the short-range ordering of the spins characteristic of two-dimensional magnets was found. The magnetic enthalpy and entropy were evaluated to be ΔH=291 J mol^-1 and ΔS=27.4 J K^-1 mol^-1, respectively. The experimental magnetic entropy agrees roughly with ΔS=Rln(5·5·2) (=32.5 J K^-1 mol^-1; R being the gas constant), which is expected for the metal complex with two Mn(III) ions in high-spin state (spin quantum number S=2) and one Fe(III) ion in low-spin state (S=1/2). The heat capacity tail above T_c1 became small by grinding and pressing the crystal. This mechanochemical effect would be attributed to the increase of lattice defects and imperfections in the crystal lattice, leading not only to formation of the crystal with a different magnetic phase transition temperature but also to decrease of the magnetic heat capacity and thus the magnetic enthalpy and entropy.     

Thermokinetics on the reaction of formation of Dy[(C<Subscript>5</Subscript>H<Subscript>8</Subscript>NS<Subscript>2</Subscript>)<Subscript>3</Subscript>(C<Subscript>12</Subscript>H<Subscript>8</Subscript>N<Subscript>2</Subscript>)]

The enthalpy change of formation of the reaction of hydrous dysprosium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen?H₂O) in absolute ethanol at 298.15 K has been determined as (-16.12 ± 0.05) kJ?mol^-1 by a microcalormeter. Thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), rate constant and kinetics parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the reaction have also been calculated. The enthalpy change of the solid-phase reaction at 298.15 K has been obtained as (53.59 ± 0.29) kJ?mol^t-1 by a thermochemistry cycle. The values of the enthalpy change of formation both in liquid-phase and solid-phase reaction indicated that the complex could only be synthesized in liquid-phase reaction.     

Molecular Structure and Conformational Preferences of Trimethyl Phosphorotrithioite,P(SMe)<Subscript>3</Subscript>, Evaluated by Gas-Phase Electron Diffraction and Quantum Chemical Calculations

Free P(SMe)₃ molecule was studied by gas electron diffraction (GED) and by B3PW91/6-311+G* (DFT) and MP2/6-31+G* calculations. Each conformer is characterized by three dihedral angles τ(CSPlp), where lp denotes the direction of the lone electron lone pair on the P atom. DFT calculations indicate that the most stable conformer is an anti,gauche+,gauche- (ag+g-) conformer of C _s symmetry; the next are the ag+g+ (ΔE = 2.5 kJ mol⁻¹), g+g+g+ (ΔE = 5.2 kJ mol⁻¹), and aa+g+ (Δ E = 12.5 kJ mol⁻¹) conformers. The MP2 calculations give the similar order, with the relative energies of 0.3, 4.3, and 10.6 kJ mol⁻¹, respectively. The experimental GED data agree well with the presence of only two conformers: χ(ag+g+) = 80(20)% and χ(ag+g-) = 20(10)%.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 5, 2005, pp. 742–750.Original Russian Text Copyright © 2005 by Belyakov, Khramov, Baskakova, Naumov.     

Standard molar enthalpy of formation of CH<Subscript>3</Subscript>(CH<Subscript>3</Subscript>SCH<Subscript>2</Subscript>)SO,methyl methylthiomethyl sulfoxide

Summary The standard molar enthalpy of formation of methyl methylthiomethyl sulfoxide, CH₃(CH₃SCH₂)SO, at T=298.15 K in the liquid state was determined to be -199.4±1.5 kJ mol^-1 by means of oxygen rotating-bomb combustion calorimetry.     

Thermodynamic properties of strontium metaniobate SrNb<Subscript>2</Subscript>O<Subscript>6</Subscript>

The heat capacity and the enthalpy increments of strontium metaniobate SrNb₂O₆ were measured by the relaxation method (2-276 K), micro DSC calorimetry (260-320 K) and drop calorimetry (723-1472 K). Temperature dependence of the molar heat capacity in the form C _pm=(200.47±5.51)+(0.02937±0.0760)T-(3.4728±0.3115)·10⁶/T ² J K⁻¹ mol⁻¹ (298-1500 K) was derived by the least-squares method from the experimental data. Furthermore, the standard molar entropy at 298.15 K S _m⁰ (298.15 K)=173.88±0.39 J K⁻¹ mol⁻¹ was evaluated from the low temperature heat capacity measurements. The standard enthalpy of formation Δ_f H ⁰ (298.15 K)=-2826.78 kJ mol⁻¹ was derived from total energies obtained by full potential LAPW electronic structure calculations within density functional theory.     

Enthalpy of formation of BaCe<Subscript>0.9</Subscript>In<Subscript>0.1</Subscript>O<Subscript>3−δ</Subscript>(s)

Enthalpy of formation of the perovskite-related oxide BaCe_0.9In_0.1O_2.95 has been determined at 298.15 K by solution calorimetry. Solution enthalpies of barium cerate doped with indium and mixture of BaCl₂, CeCl₃, InCl₃ in ratio 1:0.9:0.1 have been measured in 1 M HCl with 0.1 M KI. The standard formation enthalpy of BaCe_0.9In_0.1O_2.95 has been calculated as −1611.7±2.6 kJ mol⁻¹. Room-temperature stability of this compound has been assessed in terms of parent binary oxides. The formation enthalpy of barium cerate doped by indium from the mixture of binary oxides is Δ_ox H ⁰ (298.15 K)=−36.2±3.4 kJ mol⁻¹.     

Thermochemistry of 2-Aminopyridine (C<Subscript>5</Subscript>H<Subscript>6</Subscript>N<Subscript>2</Subscript>)(s)

The molar enthalpies of solution of 2-aminopyridine at various molalities were measured at T=298.15 K in double-distilled water by means of an isoperibol solution-reaction calorimeter. According to Pitzer’s theory, the molar enthalpy of solution of the title compound at infinite dilution was calculated to be D_solH_m^￥ = 14.34 kJ·mol^-1\Delta_{\mathrm{sol}}H_{\mathrm{m}}^{\infty} = 14.34~\mbox{kJ}\cdot\mbox{mol}^{-1}, and Pitzer’s ion interaction parameters b_MX^(0)L, b_MX^(1)L\beta_{\mathrm{MX}}^{(0)L}, \beta_{\mathrm{MX}}^{(1)L}, and C_MX^fLC_{\mathrm{MX}}^{\phi L} were obtained. Values of the relative apparent molar enthalpies ( ^φ L) and relative partial molar enthalpies of the compound ([`(L)]₂)\bar{L}_{2}) were derived from the experimental enthalpies of solution of the compound. The standard molar enthalpy of formation of the cation C₅H₇N₂ ⁺\mathrm{C}_{5}\mathrm{H}_{7}\mathrm{N}_{2}^{ +} in aqueous solution was calculated to be D_fH_m^o(C₅H₇N₂⁺,aq)=-(2.096±0.801) kJ·mol^-1\Delta_{\mathrm{f}}H_{\mathrm{m}}^{\mathrm{o}}(\mathrm{C}_{5}\mathrm{H}_{7}\mathrm{N}_{2}^{+},\mbox{aq})=-(2.096\pm 0.801)~\mbox{kJ}\cdot\mbox{mol}^{-1}.     

Calculations of thermodynamic stability of CpCoC<Subscript>2</Subscript>B<Subscript>9</Subscript>H<Subscript>11</Subscript> cobaltacarborane isomers

Quantum-chemical calculations of the geometry and energies of nine possible isomers of 12-vertex cobaltacarborane CpCoC₂B₉H₁₁ (1) were carried out by the DFT method (PBEPBE/DGDZVP/DGA1). Thermodynamic stability of the isomers increases with increasing distance between the carbon atoms in the cage and is virtually independent of the position of the CpCo vertex. The relative stabilities of the 1,2,3-(17.57 kcal mol⁻¹), 1,2,4-(3.72 kcal mol⁻¹), and 1,2,9-isomers of 1 (0 kcal mol⁻¹) are similar to the corresponding values for the ortho (17.61 kcal mol⁻¹), meta (3.21 kcal mol⁻¹), and para isomers (0 kcal mol⁻¹) of carborane C₂B₁₀H₁₂. The results of the present study confirm a close similarity of the CpCo and BH fragments in metallacarborane chemistry. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1557–1559, July, 2005.     

Ytterbium tris(hexafluoroacetylacetonate) Yb(C<Subscript>5</Subscript>O<Subscript>2</Subscript>HF<Subscript>6</Subscript>)<Subscript>3</Subscript>: The composition of overheated vapor and sublimation thermodynamics

A mass spectrometric study of the saturated vapor over ytterbium tris(hexafluoroacetylacetonate) Yb(hfa)₃ (hfa = CF₃-C(O)-CH-C(O)-CF₃) and of the vapor overheated up to the thermal decomposition temperature of the complex is presented. The vapor composition changes markedly with increasing temperature. At T ≈ 370 K, the mass spectrum of the vapor over Yb(hfa)₃ indicates the presence of ions containing one to three metal atoms. As the temperature is raised, the ion currents due to oligomer ions decrease. The oligomers are not detected at T > 440 K. The total decomposition temperature of Yb(hfa)₃ is 663(9) K. The second-law enthalpy of sublimation (ΔH _s^o (380 K)) is 134 ± 7 kJ/mol for the monomer and 138 ± 10 kJ/mol for the dimer. The enthalpy of dissociation of the dimer into monomer molecules is nearly equal to the enthalpy of sublimation of the monomer and dimer: ΔH _dis(380 K) = 130 ± 15 kJ/mol.     

Thermochemistry of the ternary solid complex Gd(C5H8NS2)3(C12H8N2)

The novel ternary solid complex Gd(C₅H₈NS₂)₃(C₁₂H₈N₂) has been obtained from the reaction of hydrous gadolinium chloride, ammonium pyrrolidinedithiocarbamate (APDC), and 1,10-phenanthroline (o-phen · H₂O) in absolute ethanol. The complex was described by an elemental analysis, TG-DTG, and an IR spectrum. The enthalpy change of the complex formation reaction from a solution of the reagents, Δ_r H _m ^ϑ (sol), and the molar heat capacity of the complex, c _m , were determined as being − 15.174 ± 0.053 kJ/mol and 72.377 ± 0.636 J/(mol K) at 298.15 K by using an RD496-III heat conduction microcalorimeter. The enthalpy change of a complex formation from the reaction of the reagents in a solid phase, Δ_r H _m ^ϑ (s), was calculated as being 52.703 ± 0.304 kJ/mol on the basis of an appropriate thermochemical cycle and other auxiliary thermodynamic data. The thermodynamics of the formation reaction of the complex was investigated by the reaction in solution. Fundamental parameters, the activation enthalpy (ΔH _≠ ^ϑ ), the activation entropy (ΔS _≠ ^ϑ ), the activation free energy (ΔG _≠ ^ϑ ), the apparent reaction rate constant (k), the apparent activation energy (E), the preexponential constant (A), and the reaction order (n), were obtained by the combination of the thermochemical data of the reaction and kinetic equations, with the data of thermokinetic experiments. The constant-volume combustion energy of the complex, Δ_c U, was determined as being −17588.79 ± 8.62 kJ/mol by an RBC-II type rotatingbomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_c H _m ^ϑ , and standard enthalpy of formation, Δ_f H _m ^ϑ , were calculated to be −17604.28 ± 8.62 and −282.43 ± 9.58 kJ/mol, respectively. The text was submitted by the authors in English.     

The molar formation enthalpy of nano-SiO<Subscript>2</Subscript> with different surface area

Three samples of silicon dioxide were syhthesized and their surface areas were measured. A thermo-chemical cycle was designed to calculate the molar formation enthalpy. The molar formation enthalpy, Δ_f H _m^Φ, for three amorphous silica with the Langmuir surface area 198.0854, 25.1108 and 11.9821 m² g⁻¹ gave −895.52, −910.86 and −915.67 kJ mol⁻¹, respectively. With the increasing surface area, the values of Δ_f H _m^Φ increased accordingly. The results suggest that the silica with larger surface area is more unstable. The wetting heat was also measured by adding the silica powder into water. With the rehydration of the more SiOH groups on the surface, the larger surface areas of silica lead to the more wetting heat. A smaller particle has the more unstable hydroxyl groups and surface energy.     

Standard molar enthalpies of formation of [RE(Gly)<Subscript>4</Subscript>(Im)(H<Subscript>2</Subscript>O)](ClO<Subscript>4</Subscript>)<Subscript>3</Subscript> (<Emphasis Type="Italic">RE</Emphasis>=Eu,Sm)

The two complexes, [RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)(RE = Eu, Sm), have been synthesized and characterized. The standard molar enthalpies of reaction for the following reactions, RECl₃·6H₂O(s)+4Gly(s)+Im(s)+3NaClO₄(s) = =[RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)+3NaCl(s)+5H₂O(l), were determined by solution-reaction colorimetry. The standard molar enthalpies of formation of the two complexes at T = 298.15 K were derived as Δ_f H _m^Θ {Eu(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = = −(3396.6±2.3) kJ mol⁻¹ and Δ_f H _m^Θ {Sm(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = −(3472.7±2.3) kJ mol⁻¹, respectively.     

Mechanism of Replacement of the Nitro Group and Fluorine Atom in <Emphasis Type="Italic">meta</Emphasis>-Substituted Nitrobenzenes by Phenols in the Presence of Potassium Carbonate

The relative mobilities of the nitro group and fluorine atom in 1,3-dinitrobenzene and 1-fluoro-3-nitrobenzene by the action of phenols in the presence of potassium carbonate in dimethylformamide at 95–125°C were studied by the competing reaction method. The rate constant ratios k(NO₂)/k(F) were correlated with the differences between the corresponding activation parameters (ΔΔH ^≠ and ΔΔ S ^≠). The greater mobility of the nitro group was found to be determined by the entropy control of the reactivity of arenes. The activation parameters (ΔH ^≠ and ΔS ^≠) were calculated, and the enthalpy-entropy compensation effect was revealed. The reaction mechanism is discussed.__________Translated from Zhurnal Organicheskoi Khimii, Vol. 41, No. 7, 2005, pp. 999–1005.Original Russian Text Copyright © 2005 by Khalfina, Vlasov.     

Interconversion of stannylium ions in the C<Subscript>4</Subscript>H<Subscript>11</Subscript>Sn<Superscript>+</Superscript> system

B3LYP method with the LANL2DZ basis for tin and aug-cc-pVDZ basis for carbon and hydrogen were used to obtain the equilibrium geometry of the main (with a positive charge on the tin) isomers in the C₄H₁₁Sn⁺ system and the transition states at their interconversion. As in the case of silicon and germanium, the cations of lighter elements of the 14th group, the most stable isomer is shown to be the tertiary ion, however, the energy of its complexes with ethane and propane is higher only by several kJ mol⁻¹. Nevertheless, the formation of these complexes from the tertiary ion requires overcoming a rather high barrier (293 and 272 kJ mol⁻¹, respectively). The barrier for isomerization of the secondary ion in the ethane complex is somewhat lower (222 kJ mol⁻¹), but still is significantly greater than the energy gained at the appearance of the nucleogenic ion. The most probable transformation pathways of the nucleogenic stannylium ions are the formation of complexes with ethylene, which requires overcoming barriers of 130 and 117 kJ mol⁻¹ for the tertiary and secondary ions, respectively.     

Calorimetric determination of enthalpy changes for the proton ionization of N-tris(hydroxymethyl)methyl-4-aminobutanesulfonic acid (TABS), N-tris(hydroxymethyl)methyl-3-aminopropanesulfonic acid (TAPS) and 3-[N-tris(hydroxymethyl)methylamino]-2-hyroxypropane sulfonic acid (TAPSO) in water–methanol mixtures

Enthalpies for the two proton ionizations of the biochemical buffers N-tris(hydroxymethyl)methyl-4-aminobutanesulfonic acid (TABS), N-tris(hydroxymethyl)methyl-3-aminopropanesulfonic acid (TAPS) and 3-[N-tris(hydroxymethyl)methylamino]-2-hyroxypropane sulfonic acid (TAPSO) were obtained in water–methanol mixtures with methanol mole fraction (X_m) from 0 to 0.360. The ionization enthalpy for the first proton (ΔH₁) of all three buffers was small and exhibited slight changes upon methanol addition. The ionization enthalpy of the second proton (ΔH₂) of TABS increased from 39.6 to 49.8 kJ mol⁻¹ and for TAPS from 40.1 to 43.2 kJ mol⁻¹, with a minimum of 38.2 kJ mol⁻¹ at X_m = 0.059. For TAPSO the increase was from 33.1 to 35.6 kJ mol⁻¹ at X_m = 0.194, with measurements at higher X_m precluded by low solubility of TAPSO in methanol rich solvents. The solvent composition was selected so as to include the region of maximum structure enhancement of water by methanol. The results were interpreted in terms of solvent–solvent and solvent–solute interactions.     

Composition of the gas phase over Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and the enthalpies of atomization of AlO,Al<Subscript>2</Subscript>O,and Al<Subscript>2</Subscript>O<Subscript>2</Subscript>

The A1, O, AlO, A1₂O, Al₂O₂, WO₂, and WO₃, partial pressures in the vapor over Al₂O₃ in a tungsten Knudsen effusion cell between 2300 and 2600 K were derived from A1⁺, O⁺, AlO⁺, A1₂O⁺, Al₂O₂⁺, WO₂⁺, and WO₃⁺, ion intensities. The mass spectrometer was calibrated against the equilibrium constant of the WO₃(g) = WO₂(g) + O(g) reaction. Refined values of the ionization cross sections of AlO and A1₂O₂ were used in the partial pressure calculations. The enthalpies of atomization of aluminum suboxides were determined to be Δ_at H ^o(AlO, g, 0) = 510.7 ± 3.3 kJ mol⁻¹, Δ_at H ^o(Al₂O, g, 0) = 1067.2 ± 6.9 kJ mol⁻¹, and Δ_at H ^o(Al₂O₂, g, 0) = 1556.7 ± 9.9 kJ mol⁻¹.