Syntheses,Structural, and Spectroscopic Properties of Copper(II) Complexes of Constrained Macrocyclic Ligands

The complexes [Cu(L¹)(H₂O)₂](BF₄)₂ · 2H₂O ( 1 ) [L¹ = 5, 16‐dimethyl‐2, 6, 13, 17‐tetraazatricyclo(14, 4, 0^1.18,0^7.12)docosane] and 0.5[Cu(L²)(NO₃)₂][Cu(L²)](NO₃)₂ ( 2 ) [L² = dibenzyl‐5, 16‐dimethyl‐2, 6, 13, 17‐tetraazatricyclo(14, 4, 0^1.18,0^7.12)docosane] were synthesized and characterized by single crystal X‐ray analyses. In these constrained macrocycles, the central copper(II) atoms are in a tetragonally distorted octahedral environment with four nitrogen atoms of the macrocyclic ligands in equatorial positions and oxygen atoms from either water molecules or nitrato groups in axial positions. The macrocyclic ligands in both complexes adopt the most stable trans‐III conformation. The Cu–N distances [1.999(7)–2.095(7) Å] are typical for such complexes, but the axial ligands are weakly coordinating Cu–OH₂ bonds [2.693(3) Å] and Cu–ONO₂ bonds [2.873(7) Å] due to the combination of the pseudo Jahn–Teller effect and strong in‐plane ligand field. The crystals are stabilized by a three‐dimensional network by hydrogen bonds that are formed among the secondary nitrogen hydrogen atoms, oxygen atoms of water molecules, fluorine atoms of BF₄^–, and oxygen atoms of NO₃^–. The electronic absorption and IR spectroscopic properties are also discussed.     

Reverse Micelle Synthesis of Colloidal Nickel–Manganese Layered Double Hydroxide Nanosheets and Their Pseudocapacitive Properties

Colloidal nanosheets of nickel–manganese layered double hydroxides (LDHs) have been synthesized in high yields through a facile reverse micelle method with xylene as an oil phase and oleylamine as a surfactant. Electron microscopy studies of the product revealed the formation of colloidal nanoplatelets with sizes of 50–150 nm, and X‐ray diffraction, energy dispersive X‐ray spectroscopy, and X‐ray photoelectron spectroscopy studies showed that the Ni–Mn LDH nanosheets had a hydrotalcite‐like structure with a formula of [Ni₃Mn(OH)₈](Cl^?) ? n H₂O. We found that the presence of both Ni and Mn precursors was required for the growth of Ni‐Mn LDH nanosheets. As pseudocapacitors, the Ni–Mn LDH nanosheets exhibited much higher specific capacitance than unitary nickel hydroxides and manganese oxides.     

Water‐Free Rare‐Earth‐Metal Ionic Liquids/Ionic Liquid Crystals Based on Hexanitratolanthanate(III) Anion

The hexanitratolanthanate anion (La(NO₃)₆^3?) is an interesting symmetric anion suitable to construct the component of water‐free rare‐earth‐metal ionic liquids. The syntheses and structural characterization of eleven lanthanum nitrate complexes, [C_nmim]₃[La(NO₃)₆] (n=1, 2, 4, 6, 8, 12, 14, 16, 18), including 1,3‐dimethylimidazolium hexanitratolanthanate ([C₁mim]₃[La(NO₃)₆], 1 ), 1‐ethyl‐3‐methylimidazolium hexanitratolanthanate ([C₂mim]₃[La(NO₃)₆], 2 ), 1‐butyl‐3‐methylimidazolium hexanitratolanthanate ([C₄mim]₃[La(NO₃)₆], 3 ), 1‐isobutyl‐3‐methylimidazolium hexanetratolanthanate ([isoC₄mim]₃[La(NO₃)₆], 4 ), 1‐methyl‐3‐(3′‐methylbutyl)imidazolium hexanitratolanthanate ([MC₄mim]₃[La(NO₃)₆], 5 ), 1‐hexyl‐3‐methylimidazolium hexanitratolanthanate ([C₆mim]₃[La(NO₃)₆], 6 ), 1‐methyl‐3‐octylimidazolium hexanitratolanthanate ([C₈mim]₃[La(NO₃)₆], 7 ), 1‐dodecyl‐3‐methylimidazolium hexanitratolanthanate ([C₁₂mim]₃[La(NO₃)₆], 8 ), 1‐methyl‐3‐tetradecylimidazolium hexanitratolanthanate ([C₁₄mim]₃[La‐(NO₃)₆], 9 ), 1‐hexadecyl‐3‐methylimid‐azolium hexanitratolanthanum ([C₁₆dmim]₃[La(NO₃)₆], 10 ), and 1‐methyl‐3‐octadecylimidazolium hexanitratolanthanate ([C₁₈mim]₃[La(NO₃)₆], 11 ) are reported. All new compounds were characterized by ¹H and ¹³C NMR, and IR spectroscopy as well as elemental analysis. The crystal structure of compound 1 was determined by using single‐crystal X‐ray diffraction, giving the following crystallographic information: monoclinic; P2₁/c; a=15.3170 (3), b=14.2340 (2), c=13.8954(2) Å; β=94.3453(15)°, V=3020.80(9) ų, Z=4, ρ=1.764 g cm^?3. The coordination polyhedron around the lanthanum ion is rationalized by six nitrate anions with twelve oxygen atoms. No hydrogen‐bonding network or water molecule was found in 1 . The thermodynamic stability of the new complexes was investigated by using thermogravimetric analysis (TGA). The water‐free hexanitratolanthanate ionic liquids are thermal and moisture stable. Four complexes, namely complexes 8 – 11 , were found to be ionic liquid crystals by differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). They all present smectic A liquid‐crystalline phase.     

Synthesis,Structure, and Reactivity of RuII Complexes with Trimethylsilylethinylamidinate Ligands

The mononuclear amidinate complexes [(η⁶‐cymene)‐RuCl( 1a )] ( 2 ) and [(η⁶‐C₆H₆)RuCl( 1b )] ( 3 ), with the trimethylsilyl‐ethinylamidinate ligands [Me₃SiC≡CC(N‐c‐C₆H₁₁)₂]^– ( 1a^– ) and[Me₃SiC≡CC(N‐i‐C₃H₇)₂]^– ( 1b^– ) were synthesized in high yields by salt metathesis. In addition, the related phosphane complexes[(η⁵‐C₅H₅)Ru(PPh₃)( 1b )] ( 4a ) [(η⁵‐C₅Me₅)Ru(PPh₃)( 1b )] ( 4b ), and [(η⁶‐C₆H₆)Ru(PPh₃)( 1b )](BF₄) ( 5 ‐BF₄) were prepared by ligand exchange reactions. Investigations on the removal of the trimethyl‐silyl group using [Bu₄N]F resulted in the isolation of [(η⁶‐C₆H₆)Ru(PPh₃){(N‐i‐C₃H₇)₂CC≡CH}](BF₄) ( 6 ‐BF₄) bearing a terminal alkynyl hydrogen atom, while 2 and 3 revealed to yield intricate reaction mixtures. Compounds 1a / b to 6 ‐BF₄ were characterized by multinuclear NMR (¹H, ¹³C, ³¹P) and IR spectroscopy and elemental analyses, including X‐ray diffraction analysis of 1b , 2 , and 3 .     

Hydrogen Bonding Network of 4‐Amidiniumpyridine Acetate and PtIIbis(triphenylphosphine) Complexes with 4‐Amidine­pyridine

The X‐ray structures of 4‐amidiniumpyridine acetate, ( 1· H)AcO, and of cis‐[Pt( 1 )₂(PPh₃)₂](NO₃)₂ ( 2 ), as well as their IR spectra, reveal intramolecular hydrogen bonding, which held together the cations and the anions. The IR spectroscopic data suggest that this may be so also in cis‐[PtCl( 1 )(PPh₃)₂](BF₄) ( 3 ). In ( 1· H)AcO and in 2 extensive intermolecular hydrogen bonding networks span through the whole crystals.     

Ruthenium Complexes of an Abnormally Bound,Anionic N‐Heterocyclic Carbene

The abnormally bound, anionic NHC–borane complex [Ru(IDipp‐BF₃)(p‐cymene)Cl]₂ ( 4 ; IDipp‐BF₃=1,3‐(2,6‐iPr₂C₆H₃)₂‐2‐BF₃(C₃HN₂)‐4‐yl) was synthesized by transmetalation from Li[(IDipp‐BF₃)₂Ag]. Addition of donors gave species of the form [Ru(IDipp‐BF₃)(p‐cymene)(L)Cl], whereas halide abstraction with Ag(Et₂O)[B(C₆F₅)₄] gave C?H activation of the methine position of the IDipp?BF₃ ligand.     

Preparation and characterization of copper nanoparticles surface‐capped by alkanethiols

Cu nanoparticles surface‐capped by alkanethiols were synthesized using ligand exchange method in a two‐phase system. The effects of synthetic conditions, including the pH value of CuSO₄ solution, the ratio of cetyltrimethyl ammonium bromide to CuSO₄, and reaction temperature, on the size and shape of as‐synthesized Cu nanoparticles were investigated. As‐synthesized Cu nanoparticles surface‐capped by alkanethiols with different chain lengths (C_xS‐Cu) were characterized by means of X‐ray diffraction, transmission electron microscopy, Fourier transform infrared spectrometry, and ultraviolet–visible light spectrometry. The tribological behavior of C_xS‐Cu as an additive in liquid paraffin was evaluated with a four‐ball machine. Results indicate that cetyltrimethyl ammonium bromide plays an important role in controlling the dispersion of Cu nanoparticles before adding modifier octanethiol into the reaction solution. C_xS‐Cu nanoparticles as additive in liquid paraffin possess excellent antiwear and friction‐reduction performance because of the deposition of nano‐Cu with low melting point on worn steel surface leading to the formation of a self‐repairing protective layer thereon. Copyright © 2013 John Wiley & Sons, Ltd.     

Microwave‐Assisted Synthesis and Characterization of CuO Nanocrystals

CuO feather‐like and flower‐like crystals have been synthesized by a fast microwave‐assisted solution approach using Cu(NO₃)₂ and NaOH. The morphology transformation of CuO could be achieved by ionic liquid 1‐n‐butyl‐3‐methyl imidazolium tetrafluoroborate ([BMIM]BF₄). With [BMIM]BF₄, flower‐like CuO were obtained, whereas without [BMIM]BF₄, feather‐like CuO were obtained. The possible formation mechanism of flower‐like CuO was discussed on the basis of experimental results. The products were characterized by XRD, FESEM/EDS, and TEM/SAED. In addition, the adsorption of [BMIM]BF₄ on flower‐like CuO was confirmed by FTIR and TG/DSC, and the band gap energies of the flower‐like CuO was estimated by UV‐vis spectra.     

Synthesis and Structure of Copper(II) Nitrate Complexes with 2, 6‐Bis(pyrazolyl)pyridine

Three mononuclear copper(II) complexes of copper nitrate with 2, 6‐bis(pyrazol‐1‐yl)pyridine ( bPzPy ) and 2, 6‐bis(3′,5′‐dimethylpyrazol‐1‐yl)pyridine ( bdmPzPy ), [Cu(bPzPy)(NO₃)₂] ( 1 ), [Cu(bPzPy)(H₂O)(NO₃)₂] ( 2 ) and [Cu(bdmPzPy)(NO₃)₂] ( 3 ) were synthesized by the reaction of copper nitrate with the ligand in ethanol solution. The complexes have been characterized through analytical, spectroscopic and EPR measurements. Single crystal X‐ray structure analysis of complexes 1 and 2 revealed a five‐coordinate copper atom in 1 , whereas 2 contains a six‐coordinate (4+2) Cu^II ion with molecular units acting as supramolecular nodes. These neutral nodes are connected through O–H ··· O(nitrate) hydrogen bonds to give couples of parallel linear strips assembled in 1D‐chains in a zipper‐like motif.     

单分散Fe3O4纳米颗粒的控制合成和表征

以十八烯为溶剂、乙酰丙酮铁为铁源,并在油酸、油胺的辅助作用下,通过热分解法成功合成了单分散Fe3O4纳米颗粒。讨论了实验参数如反应温度、表面活性剂的量和种类、溶剂、油酸、油胺对单分散Fe3O4纳米颗粒的尺寸及形貌的影响。利用X射线衍射（XRD）、透射电子显微镜（TEM）、选区电子衍射（SAED）和高分辨透射电子显微镜（HRTEM）对所得产物的物相、结构、尺寸和形貌进行了表征分析。通过振动样品磁强计（VSM）表征产物磁性能,表明在室温下,Fe3O4纳米颗粒的饱和磁化强度（Ms）和矫顽力（Hc）分别为74.0 emu/g,72.6 Oe。     

Synthesis and Crystal Structure of a Puckered Rhombus Grid-like Coordination Polymer with Bridging Ligand Containing Sulfanyl Linker

Introduction The design and construction of metal-organic frameworks (MOFs), obtained by metal-directed self-assembly from labile metal centers and multidentate bridging ligands, is a rapidly developing area of su-pramolecular chemistry.1-3 Besides the aesthetic struc-tural and fascinating functional motifs, they are of in-terest both for understanding the mechanisms of the assembly process and for the host-guest chemistry asso-ciated with their large central cavities.4-13 It has been documen…     

Three New Lanthanide Coordination Polymers Built from H2bpdc Ligands: Syntheses,Structures, and Properties

Three new lanthanide‐organic coordination polymers, {[Ln₂(bpdc)₂(H₂O)₆(NO₃)] · NO₃} [Ln = La ( 1 ), Ce ( 2 ), Pr ( 3 )] (H₂bpdc = 2, 2′‐bipyridine‐6, 6′‐dicarboxylic acid) were synthesized under hydrothermal conditions and structurally characterized by elemental analysis, IR spectroscopy as well as single‐crystal and powder X‐ray diffraction. Single‐crystal X‐ray diffraction analysis revealed that compounds 1 – 3 are isostructural, composed of two dimensional honeycomb network linked by bpdc ligands. The magnetic property of compound 3 was investigated.     

Fe3O4@NCs/BF0.2: A magnetic bio‐based nanocatalyst for the synthesis of 2,3‐dihydro‐1H‐perimidines

Nanocellulose (NC) materials have some unique properties, which make them attractive as organic or inorganic supports for catalytic applications. Nanocatalysts with diameters of less than 100 nm are difficult to separate from the reaction mixture, therefore, magnetic nanoparticles (MNPs) were used as catalysts to overcome this problem. Fe₃O₄@NCs/BF_0.2 as a green, bio‐based, eco‐friendly, and recyclable catalyst was synthesized and characterized using fourier‐transform infrared spectroscopy (FT‐IR), vibrating sample magnetometer (VSM), X‐ray diffraction (XRD), X‐ray fluorescence (XRF), Brunauer–Emmett–Teller (BET), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and thermal gravimetric analysis (TGA) techniques. Fe₃O₄@NCs/BF_0.2 was employed for the synthesis of 2,3‐dihydro‐1H‐perimidine derivatives via a reaction of 1,8‐diaminonaphthalene with various aldehydes at room temperature under solvent‐free conditions. The present procedure offers several advantages including a short reaction time, excellent yields, easy separation of catalyst, and environmental friendliness.     

Microporous La–Metal–Organic Framework (MOF) with Large Surface Area

A microporous La–metal‐organic framework (MOF) has been synthesized by the reaction of La(NO₃)₃ ? 6 H₂O with a ligand 4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐p‐aminobenzoate (TATAB) featuring three carboxylate groups. Crystal structure analysis confirms the formation of 3D MOF with hexagonal micropores, a Brunauer–Emmett—Teller (BET) surface area of 1074 m² g^?1 and high thermal and chemical stability. The CO₂ adsorption capacities are 76.8 cm³ g^?1 at 273 K and 34.6 cm³ g^?1 at 293 K, a highest measured CO₂ uptake for a Ln–MOFs.     

Fluorescent UO2(II) and ZrO(II) complexes: Synthesis,structural characterization,fluorescence, DNA binding studies and biological applications in cell probing

A new series of UO2(II) and ZrO(II) azo‐complexes based on 5‐nitro‐8‐hydroxyquinoline; [UO₂(H₂L¹)(NO₃)EtOH] (1), [ZrO(H₂L¹)(NO₃)H₂O] (2), [UO₂(HL²)(NO₃)EtOH]3H₂O (3), [ZrO(HL²)(NO₃)EtOH] (4), [UO₂(HL³)(NO₃)(H₂O)₃]2H₂O (5) and [ZrO(HL³)(NO₃)EtOH] (6); have been synthesized. The structure of these complexes has been characterized using elemental analysis, thermal analysis, molar conductance, UV–vis, IR, electron impact mass, X‐ray powder diffraction and NMR spectra. The results revealed the formation of non‐electrolyte mononuclear complexes via the N atom of the azo group or of the quinoline ring and the oxygen atom of the deprotonated OH. Fluorescence properties of the synthesized complexes have been examined and the fluorescence quantum yield (Φ_f) has been determined. The complexes have been tested as cell staining and imaging under the fluorescent microscope. The data showed that complexes 1 and 2 efficiently stain the nuclei in addition to some focal cytoplasmic areas. Other than complexes 3 and 4 exclusively stained the nuclei. On the other hand, complexes 5 and 6 stained the cytoplasm exclusively. It has been demonstrated that complex 4 was the most effective in cell staining. The binding constant (Kb) with DNA was calculated using UV–vis absorption titration and fluorescence spectral methods. It was concluded that complex 4 can be used effectively as fluorescent probes in studying cell biology.     

Synthesis,Characterization and Fluorescent Properties of Three One‐Dimensional Coordination Polymers Derived from Polypyridyl Ligands

Three one‐dimensional coordination polymers, [MnCl₂(4‐pyterpy)]∙2CHCl₃ ( 1 ), [Mn(NO₃)₂(4‐pyterpy)]∙CHCl₃ ( 2 ) and [Ag(NO₃)(3‐pyterpy)]∙H₂O ( 3 ) (4‐pyterpy = 4′‐(4‐pyridyl)‐2,2′:6′,2″‐terpyridine and 3‐pyterpy = 4′‐(3‐pyridyl)‐2,2′:6′,2″‐terpyridine) were synthesized and characterized by X‐ray diffraction. All three compounds exhibit a rare “head‐to‐tail” coordination of the multidentate ligand, but differ significantly in their polymer chain conformations. Additionally, the fluorescent properties of all three compounds were investigated and show a weak, ligand‐centered fluorescence at 416–418 nm.     

Anion Effects on the Formation of Silver(I) Complexes with the Flexible Ligand 4,4′‐Bis(1,2,4‐triazol‐1‐ylmethyl)biphenyl

The reaction of 4,4′‐bis(1,2,4‐triazol‐1‐ylmethyl)biphenyl (btmb) with silver(I) salts of BF₄^–, NO₃^– and N₃^– led to the formation of four new silver(I) coordination polymers {[Ag(btmb)]BF₄}_n ( 1 ), {[Ag₂(btmb)₃](NO₃)₂(H₂O)₅}_n ( 2 ), [Ag₂(btmb)(N₃)₂]_n ( 3 ), and [Ag(btmb)(N₃)]_n ( 4 ). Their coordination number varies from 2 (in 1 ) to 3 (in 2 ), 4 (in 3 ), and 5 (in 4 ). Different from the single chain structure of 1 , complex 2 displays a 1D ladder‐like double chain framework, whereas complex 3 exhibits a 2D layered architecture. Complex 4 has the same anion as complex 3 but shows a different metal‐to‐ligand ratio and a 1D double‐zigzag chain structure. Both 3 and 4 have Ag ··· Ag argentophilic interactions. The ligand btmb adopts both cis or trans configuration in the studied complexes. A trans‐ or cis‐btmb ligand link silver ions with Ag ··· Ag distances of ≈?18 and 13 Å, respectively. BF₄^– and NO₃^– are non‐coordinating anions in 1 and 2 . N₃^– is the bridging anion in 3 (1,3‐bridging fashion) and 4 (1,1‐bridging fashion). These findings suggest that the coordination numbers around the Ag^I ion correlate to the coordination abilities of anions and the btmb to silver ratio. In addition, the influence of anions on thermal stability were also investigated. This work is a good example that nicely supports the less explored field of anion‐dependent structures of complexes with non‐pyridyl ligands.     

Enzymatic ring‐opening polymerization of ε‐caprolactone by Yarrowia lipolytica lipase in ionic liquids

Yarrowia lipolytica (YLL), Candida rugosa (CRL), and porcine pancreatic lipase (PPL) were employed successfully as catalysts in the enzymatic ring‐opening polymerization (ROP) of ε‐caprolactone in the presence of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ([EMIM][BF₄]), 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIM][BF₄]), 1‐butylpyridinium tetrafluoroborate ([BuPy][BF₄]), 1‐butylpyridinium trifluoroacetate ([BuPy][CF₃COO]), 1‐ethyl‐3‐methylimidazolium nitrate ([EMIM][NO₃]) ionic liquids. Poly(ε‐caprolactone)s (PCLs) with molecular weights (M_n) in the range of 300–9000 Da were obtained. ¹H‐ and ¹³C‐NMR analyses on PCLs formed by YLL, CRL, and PPL showed asymmetric telechelic α‐hydroxy‐ω‐carboxylic acid end groups. Differences between CP‐MAS and MAS spectra are observed and discussed in terms of morphology. MALDI‐TOF spectra show the formation of at least seven species. Differential scanning calorimetry (DSC) and Wide Angle X‐Ray Scattering (WAXS) results demonstrate the high degree of crystallinity present in all the polyesters. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5792–5805, 2009     

Synthesis and characterization of nanocrystalline hydroxyapatite and its catalytic behavior towards synthesis of 3,4‐disubstituted isoxazole‐5(4H)‐ones in water

In the present work, the nanocrystalline particles of hydroxyapatite (HAp) using an easy alkoxide‐based sol–gel technique including triethyl phosphate [PO (OC₂H₅)₃] and Ca (NO₃)₂·4H₂O as P and Ca precursors have been synthesized. The sample characterization was performed by X‐ray diffraction, Fourier transform‐infrared analysis, scanning electron microscopy, thermal analysis (thermogravimetric analysis/differential thermal analysis), and elemental analysis of energy‐dispersive X‐ray analysis. It is interesting that single phase of HAp was obtained at a low firing temperature of 500 ° C. Modified Scherrer equation as the Williamson?Hall method was applied for the measurement of crystallite size distributions and micro‐strain of the sample. The determined crystallite size by complementary technique of transmission electron microscopy has good consistency with those obtained from the Scherrer formula. Moreover, we reported the one‐pot synthesis of 3,4‐disubstituted isoxazole‐5(4H)‐ones through the aqueous solution reaction of three components of ethyl acetoacetate, hydroxylamine hydrochloride and various aromatic aldehydes at room temperature. This protocol offers several advantages, including a simple work‐up procedure, very short reaction times (under 25 min), in accordance with the principles of green chemistry, recyclability, excellent yields (87–98%) and environmentally friendly.     

Synthesis and Crystal Structure of [La(phen)2(H2O)2(NO3)2]NO3 · 2(phen)(H2O) with phen = 1,10‐phenanthroline

The title compound [La(phen)₂(H₂O)₂(NO₃)₂](NO₃) · 2(phen)(H₂O) with phen = 1,10‐phenanthroline was prepared by the stoichiometric reaction of La(NO₃)₃ · 6 H₂O and 1,10‐phenanthroline monohydrate in a CH₃OH–H₂O solution. The crystal structure (triclinic, P 1 (no. 2), a = 11.052(2), b = 13.420(2), c = 16.300(2) Å, α = 78.12(1)°, β = 88.77(1)°, γ = 83.03(1)°, Z = 2, R = 0.0488, wR² = 0.1028) consists of [La(phen)₂(H₂O)₂(NO₃)₂]²⁺ complex cations, NO₃^– anions, phen and H₂O molecules. The La atom is 10‐fold coordinated by four N atoms of two bidentate chelating phen ligands and six O atoms of two H₂O molecules and two bidentate chelating NO₃^2– ligands with d(La–O) = 2.522–2.640 Å and d(La–N) = 2.689–2.738 Å. The intermolecular π‐π stacking interactions play an essential role in the formation of two different 2 D layers parallel to (001), which are formed by complex cations and uncoordinating phen molecules, respectively. The uncoordinated NO₃^– anions and H₂O molecules are sandwiched between the cationic and phen layers.