Spin-polarized inter-grain tunneling as the probable mechanism for low-field magnetoresistance in partially crystallized La0.5Sr0.5MnO3 thin films

Amorphous/crystalline mixed La_0.5Sr_0.5MnO₃ (LSMO) thin films on quartz wafers are prepared at different depositing temperatures using laser ablation and their low-field magnetoresistive property is investigated. It is argued that the insulating amorphous layers separating the magnetic microcrystalline grains may act as the barriers for electron tunneling. The rapid decay of magnetoresistance with increasing temperature is explained by the spin-polarized inter-grain tunneling. Given the spin-polarized inter-grain tunneling as the probable mechanism, it is believed that the spin flip during inter-grain tunneling reaches a minimum at the optimized depositing temperature of 600 °C and consequently the maximal low-field magnetoresistance is obtained. Received: 7 September 2000 / Accepted: 19 December 2000 / Published online: 23 March 2001     

Experimental investigation of non-linear selective reflection at the interface of Cs atomic vapor and quartz

We present an experimental study of non-linear selective reflection (SR) at a quartz–Cs-vapor interface in a V-type three-level scheme. The non-linear selective reflection at the Cs D₂ resonance line (⁶ S _1/2F=4→⁶ P _3/2) is monitored with and without pumping. The sub-Doppler reflection spectrum is observed and the effect of pumping on the signal of the selective reflection is investigated. The experimental result is in agreement with the theoretical calculation. Received: 16 April 2002 / Revised version: 12 June 2002 / Published online: 25 September 2002 RID="*" ID="*"Corresponding author. Fax: +86-351/701-1500, E-mail: zhaojm@sxu.edu.cn     

Laser-induced nano-patterning by means of interference subpatterns generated by microspheres

Interference patterns generated by a regular lattice of SiO₂ microspheres on a transparent support are used for the surface patterning of polyimide (PI) foils. Using 248 nm excimer-laser radiation, thousands to millions of holes with a full width at half maximum (FWHM) of 160±40 nm can be generated with a single laser pulse. Received: 1 March 2002 / Accepted: 4 March 2002 / Published online: 10 September 2002 RID="*" ID="*"Corresponding author. Fax: +43-732/2468-9242, E-mail: dieter.baeuerle@jku.at     

Ordered thin films of alkyloxy-substituted benzaldehydes on a graphite surface studied by scanning tunneling microscopy

The molecular assembly of three different trialkyloxy-substituted benzaldehydes on graphite has been studied using scanning tunneling microscopy (STM). It is found that these benzaldehydes, which do not have intermolecular hydrogen bonding, could form a lamella arrangement in which the headgroups are aligned side by side. The effect due to the alkyl chain length on the lamella structure is also presented. Received: 21 January 2002 / Accepted: 22 March 2002 / Published online: 10 September 2002 RID="*" ID="*"Corresponding author. Fax: +86-10/6255-7908     

Microstructure evolution in Pr-Co-C-Ti nanophase magnets

The microstructures of nanophase Pr-Co-C-(Ti) materials, which have improved magnetic properties, were investigated by means of transmission electron microscopy (TEM) to reveal their phase assemblage and grain-boundary structure. The phase assemblage was carefully controlled by the introduction of TiC nanoparticles and annealing. The optimal nanostructure contained uniformly distributed PrCo₅ and PrCo₂ nanophases without any magnetically soft phases, resulting in high coercivity and the characteristics of a single, hard magnetic phase. TEM analysis confirmed the presence of an amorphous grain-boundary phase surrounding the grains in alloys without TiC. In contrast, alloys with added TiC showed no amorphous phase and also showed higher coercivity compared to Co-Pr-C. Therefore, the variation of the grain boundary phases may be effective in changing the degree of exchange coupling. Controlling the formation of a uniform nanoscale microstructure, leading to improved magnetic properties, is discussed. Received: 5 September 2002 / Accepted: 10 September 2002 / Published online: 22 January 2003 RID="*" ID="*"Corresponding author. Fax: +1-630/252-7777, E-mail: ytang@anl.gov     

Structure and properties of TiO<Subscript>2</Subscript> surfaces: a brief review

Titanium oxides are used in a wide variety of technological applications where surface properties play a role. TiO₂ surfaces, especially the (110) face of rutile, have become prototypical model systems in the surface science of metal oxides. Reduced TiO₂ single crystals are easy to work with experimentally, and their surfaces have been characterized with virtually all surface-science techniques. Recently, TiO₂ has also been used to refine computational ab initio approaches and to calculate properties of adsorption systems. Scanning tunneling microscopy (STM) studies have shown that the surface structure of TiO₂(110) is more complex than originally anticipated. The reduction state of the sample, i.e. the number and type of bulk defects, as well as the surface treatment (annealing in vacuum vs. annealing in oxygen), can give rise to different structures, such as two different (1×2) reconstructions, a ‘rosette’ overlayer, and crystallographic shear planes. Single point defects can be identified with STM and influence the surface chemistry in a variety of ways; the adsorption of water is discussed as one example. The growth of a large number of different metal overlayers has been studied on TiO₂(110). Some of these studies have been instrumental in furthering the understanding of the ‘strong metal support interaction’ between group-VIII metals and TiO₂, as well as low-temperature oxidation reactions on TiO₂-supported nanoscopic gold clusters. The growth morphology, interfacial oxidation/reduction reaction, thermal stability, and geometric structure of ultra-thin metal overlayers follow general trends where the most critical parameter is the reactivity of the overlayer metal towards oxygen. It has been shown recently that the technologically more relevant TiO₂ anatase phase can also be made accessible to surface investigations. Received: 4 March 2002 / Accepted: 20 October 2002 / Published online: 5 February 2003 RID="*" ID="*"Corresponding author. Fax: +1-504/862-8279, E-mail: diebold@tulane.edu     

Removal of oxygen atoms from a SiO2 surface by incoherent vacuum ultraviolet excimer irradiation

We have demonstrated the non-thermal removal of oxygen atoms from an oxidized silicon surface (SiO₂) on a silicon wafer by the use of a low-power (0.3 mW cm^-2) incoherent vacuum ultraviolet (VUV) light source at 126 nm. X-ray photoelectron spectroscopy (XPS) has shown that a maximum Si concentration of 80% appears at the surface after a 20-h irradiation with 9.8 eV photons, as a result of oxygen removal from the SiO₂ matrix. The surface morphology, however, indicates no damage or melting on the surface even after the irradiation. Received: 15 April 2002 / Accepted: 17 April 2002 / Published online: 10 September 2002 RID="*" ID="*"Permanent address: Nano-Tech Photon Inc., Shimotomita 4132-1, Shintomi, Miyazaki, 889-1404, Japan RID="**" ID="**"Corresponding author. Fax: +81-985/583-899, E-mail: kubodera@opt.miyazaki-u.jp     

Femtosecond study of surface structure and composition and time-resolved spectroscopy in metals

Surface structuring and compositioning in aluminum alloy 2024-T3 were demonstrated using a femtosecond pulse laser. Surface nanostructuring was developed as a function of laser parameters and the surface micrographs of the scanning electron microscopy were characterized as a function of incident laser fluence. Surface compositioning was performed by selectively removing the elements on the surface of the sample. Femtosecond studies of highly excited electrons were performed by a pump–probe technique, and the thermalization time was found to be in a range of 1.5–3 ps, increasing with incident fluence. The time-resolved measurement is well matched to the numerical calculation. Received: 6 September 2001 / Accepted: 18 July 2002 / Published online: 25 October 2002 RID="*" ID="*"Corresponding author. Fax: +1-405/744-6811, E-mail: dou@okstate.edu     

Spectroscopy of cesium atoms adsorbing and desorbing at a dielectric surface

We use evanescent waves in a counterpropagating beams configuration to study the adsorption/desorption processes at a Cs vapor/dielectric interface in a sealed cell. Atoms close to the surface are velocity-selectively spin-polarized before adsorption by an amplitude-modulated pump beam. We subsequently observe the contribution of the desorbed atoms to the probe-beam absorption by way of phase-sensitive detection. We measure the number of desorbing polarized Cs atoms as a function of the surface temperature. The analysis of results is done through a simple thermodynamical model for the atomic desorption and we discuss its validity to infer the adsorption energy of the cesium atoms on a fused-quartz surface. Received: 15 May 2002 / Revised version: 7 August 2002 / Published online: 15 November 2002 RID="*" ID="*"Corresponding author. Fax: +55-83/216-7513, E-mail: martine@otica.ufpb.br     

Electronic properties of Gd@C<Subscript>82</Subscript> metallofullerene peapods: (Gd@C<Subscript>82</Subscript>)<Subscript>n</Subscript>@SWNTs

Electronic properties of Gd@C₈₂ metallofullerene peapods, (Gd@C₈₂)_n@SWNTs, were investigated by electron energy-loss spectroscopy (EELS), scanning tunneling microscopy and spectroscopy (STM/STS), and field-effect transistor (FET) transport measurements. The results indicate that the electronic structure of Gd@C₈₂ metallofullerene peapods is completely different from that of intact single-walled nanotubes (SWNTs). For example, Gd@C₈₂-peapod-FETs show ambipolar behavior which is not observed in the empty SWNT-FETs under our experimental conditions. Furthermore, in semiconducting nanotubes the band gap can be varied from ∼0.5 to ∼0.1 eV using inserted Gd@C₈₂ endohedral metallofullerenes with a spatial periodicity of 1.1 to 8.0 nm, depending on the density of the fullerenes. The present findings suggest that metallofullerene peapods may point the way toward novel electronic devices. Received: 6 September 2002 / Accepted: 25 October 2002 / Published online: 10 March 2003 RID="*" ID="*"Corresponding author. Fax: +81-52/789-1169, E-mail: noris@cc.nagoya-u.ac.jp     

150-times phase conjugation by degenerate four-wave mixing in a continuous-wave Nd:YVO4 amplifier

The high phase-conjugate reflectivity of 150, by four-wave mixing in a diode-pumped Nd:YVO₄, has been demonstrated. The phase-conjugate mirror was capable of correcting the phase aberration of a probe beam. The experimental diffraction efficiency of the transmission gratings was 60. Received: 8 April 2002 / Revised version: 10 June 2002 / Published online: 25 September 2002 RID="*" ID="*"Corresponding author. Fax: +81/43-290-3490, E-mail: omatsu@image.tp.chiba-u.ac.jp     

Micrometer-sized Si-Sn-O novel structures with SiONWs on their surfaces

Novel micrometer-sized Si-Sn-O structures with SiO₂ nanowires (SiONWs) growing from their surfaces have been achieved at about 980 °C on Si (111) wafer catalyzed by Sn vapor generated from Sn powders. The Si wafer itself served as a silicon source in the reaction. The micrometer-sized structures, with diameters of several micrometers to several tens of micrometers consisted of Sn, Si and O. The amorphous SiONWs growing from the surface of the micrometer-sized structures were smooth, with diameters about 120 nm and with a composition close to that of SiO₂. The growth mechanism of these novel structures is discussed briefly. Received: 30 July 2002 / Accepted: 18 September 2002 / Published online: 4 December 2002 RID="*" ID="*"Corresponding author. Fax: +86-551/5591434, E-mail: shsuncn@hotmail.com     

Reduced space-charge fields in near-stoichiometric LiTaO3 for blue, violet, and near-ultraviolet light beams

The wavelength dependence of the space-charge field as induced in near-stoichiometric LiTaO₃ crystals is investigated by measuring the bulk photogalvanic effect and the photoconductivity. LiTaO₃ crystals of composition nearer to stoichiometry exhibit a pronounced reduction of the saturated space-charge field, which results from a larger increase in the photoconductivity relative to the photogalvanic effect. Especially, at near-UV wavelengths, the saturated space-charge field of the order of 0.1 kV/cm reaches a minimum that is two orders of magnitude lower than typical values observed in undoped near-stoichiometric LiNbO₃. Received: 11 July 2002 / Revised version: 2 September 2002 / Published online: 20 December 2002 RID="*" ID="*"Corresponding author. Fax: +41-1/633-1056, E-mail: mojca@fiz.uni-lj.si     

Laser-induced etching and deposition of W using a-SiO<Subscript>2</Subscript> microspheres

A regular lattice of a-SiO₂ microspheres on a quartz support is used as a microlens array for laser-induced surface patterning by etching and deposition of W in atmospheres of WF₆ and WF₆+H₂, respectively. Received: 22 July 2002 / Accepted: 30 July 2002 / Published online: 4 December 2002 RID="*" ID="*"Corresponding author. Fax: +43-732/2468-9242, Email: dieter.baeuerle@jku.at     

A miniaturized detector for high-resolution SEMPA

The basics of the scanning electron microscope with polarization analysis are briefly reviewed, emphasizing the achievable magnetic resolution and image contrast. The design of an optimized spin-polarization detector based on the well-established LEED scattering principle is presented. Results of first tests are reported. Received: 2 September 2002 / Accepted: 2 September 2002 / Published online: 5 March 2003 RID="*" ID="*"Corresponding author. Fax: +49-40/42838-6368, E-mail: RFroemte@PHYSnet.Uni-Hamburg.de     

Group-IV nanocluster formation by ion-beam synthesis

A short review of our investigations devoted to the use of ion-beam-synthesized nanoclusters for silicon-based light emission and nonvolatile memory effects is presented. Blue-violet light emission is demonstrated based on Ge-implanted silicon dioxide layers thermally grown on silicon substrates. This version of silicon-based light emission relies on Ge-related defects in the amorphous ≡Si–O–Si≡ network. The photoluminescence and electroluminescence are excited by a singlet S₀–S₁ transition of a neutral oxygen vacancy and by electron injection from the silicon substrate into the silicon dioxide layer, respectively. Whereas the photoluminescence excitation is a well-known mechanism, for the case of electroluminescence an interpretation was performed for the first time in the course of our studies. It was found that the most probable way to excite luminescence centers is the impact excitation by hot electrons. Whereas the injection is explained by trap-assisted tunneling of electrons from the substrate into the oxide, the electrons will be transported via traps or in the SiO₂ conduction band. The application of the silicon-based light-emitting devices for an integrated optocoupler arrangement is described. Another application of nanoclusters is based on the investigation of thin Si-implanted silicon dioxide layers for nonvolatile memory devices. First promising results demonstrate that the observed programming window can reach several volts and the devices exhibit excellent retention behavior. A 256 K-nv-SRAM is demonstrated showing a programming window of >1 V for write pulses of 12 V/8 ms. Received: 21 August 2002 / Accepted: 21 August 2002 / Published online: 12 February 2003 RID="*" ID="*"Corresponding author. Fax: +49-351/260-3411, E-mail: w.skorupa@fz-rossendorf.de     

In situ synthesis of mesoporous CdS nanoparticles in ternary cubic phase lyotropic liquid crystal

An in situ technique for the synthesis of CdS nanoparticles in a ternary lyotropic cubic phase liquid crystal has been carried out. The extremely viscous cubic phase liquid-crystal system consists of poly(oxyethylene)₁₀ nonyl phenol ether as non-ionic surfactant, octane as oil phase and an aqueous phase containing reactant ions (Cd²⁺ and S^2-). Thioacetamide (TAA) has been utilized as a source for slow release of sulfur in the in situ synthesis of CdS. Rheological results show that CdS nanoparticle growth did not disrupt the structure of the cubic phase liquid-crystal system. This indicates that homogenous synthesis of CdS in the liquid crystal had been achieved. The final products were characterized using X-ray photoelectron spectroscopy, thermal gravimetric analysis, transmission electron microscopy and UV-visible spectroscopy. It was found that the CdS nanoparticles formed have a mesoporous structure with a size dependent on the TAA decomposition aging time. Received: 29 March 2002 / Accepted: 4 September 2002 / Published online: 17 December 2002 RID="*" ID="*"Corresponding author. Fax: +603-8921/3257, E-mail: shahidan@pkrisc.cc.ukm.my     

Downwards to metrology in nanoscale: determination of the AFM tip shape with well-known sharp-edged calibration structures

More and more AFMs and AFM profilers will be used to quantify micro- and nanostructures. For a correct characterization and evaluation of the measured structural details, in the nanoscale range, knowledge of the current shape of the AFM tip is needed. Often, the interaction between the AFM tip and the sample leads to a change in the tip shape. Our concept for the determination of tip shapes is based on the measurement of a well-known sharp-edged silicon structure. Each calibration sample contains a selected structure serving as a calibrated width standard, and has a certified pitch. Consequently, the shape of AFM tips can be determined with an accuracy of 10 nm. Received: 2 September 2002 / Accepted: 2 September 2002 / Published online: 5 March 2003 RID="*" ID="*"Corresponding author. Fax: +49-3641/206-199, E-mail: huebner@ipht-jena.de     

Wetting and scanning force microscopy on rough polymer surfaces: Wenzel’s roughness factor and the thermodynamic contact angle

The influence of the surface roughness of polypropylene on the contact angle hysteresis is investigated by means of ethylene glycol drops in order to estimate the true Young’s equilibrium contact angle. A new relationship between the contact angle hysteresis and Wenzel’s contact angle is derived. In addition, the determination of Wenzel’s roughness factor by means of scanning force microscopy opens an alternative way to obtaining Young’s equilibrium contact angle without any surface manipulation. The experimental results presented verify this new approach. Received: 2 September 2002 / Accepted: 2 September 2002 / Published online: 5 March 2003 RID="*" ID="*"Corresponding author. Fax: +49-3328/352-452, E-mail: helmut.kamusewitz@gkss.de     

Ion irradiation of exchange bias systems for magnetic sensor applications

It has been demonstrated that He⁺ ion irradiation is an excellent tool for modifying magnetic properties, like the magnetic anisotropy, the interlayer exchange coupling strength and the exchange bias field of ultra-thin magnetic layered systems. This paper summarizes the effects of ion irradiation on exchange bias systems. As a first example, for possible applications of the ion induced magnetic effects, the realization of an angle sensing device is described. Received: 11 November 2002 / Accepted: 12 November 2002 / Published online: 4 April 2003 RID="*" ID="*"Corresponding author. Fax: +49-631-205-4095, E-mail: fassbend@physik.uni-kl.de RID="**" ID="**"Present address: Université de Rouen, Rouen, France