Non-invasive NMR stratigraphy of a multi-layered artefact: an ancient detached mural painting

NMR stratigraphy was used to investigate in situ, non-destructively and non-invasively, the stratigraphy of hydrogen-rich layers of an ancient Nubian detached mural painting. Because of the detachment procedure, a complex multi-layered artefact was obtained, where, besides layers of the original mural painting, also the materials used during the procedure all became constitutive parts of the artefact. NMR measurements in situ enabled monitoring of the state of conservation of the artefact and planning of minimum representative sampling to validate results obtained in situ by solid-state NMR analysis of the samples. This analysis enabled chemical characterization of all organic materials. Use of reference compounds and prepared specimens assisted data interpretation.

Microstructure elucidation of historic silk (Bombyx mori) by nuclear magnetic resonance

¹H NMR cryoporometry and solid-state ¹³C cross-polarization (CP) magic-angle spinning (MAS) NMR spectroscopy were used to characterize the microstructure of historic and fresh silk samples. Silk is a polymeric bicomponent material composed of fibroin and water located in micropores. According to the ¹H NMR cryoporometry method, the intensity of the water resonance as a function of the temperature was used to obtain the pore size distribution, which was strongly asymmetric with a well-defined maximum at 1.1 nm. Compared with the fresh silk samples, the volume of pores around 1.1 nm decreased distinctly in the historic silk, and more pores larger than 2 nm emerged accordingly. In addition, these results correlated well with solid-state ¹³C CP/MAS NMR spectroscopy as the percentage of random coil in the historic silk sample was much less than that in the fresh silk samples. Therefore, it is suggested that the water-filled microvoids grow larger as the random coil conformation fades away in the degradation process.

Single and multiplexed immunoassays for the chemiluminescent imaging detection of animal glues in historical paint cross-sections

The characterization of the organic components in a complex, multilayered paint structure is fundamental for studying painting techniques and for authentication and restoration purposes. Proteinaceous materials, such as animal glue, are of particular importance since they are widely used as binders, adhesives and for gilding. Even though proteins are usually detected by chromatographic and proteomic techniques, immunological methods represent an alternative powerful approach to protein analysis thanks to the high specificity of antigen–antibody reactions. Our previous studies demonstrated that ovalbumin and casein could be localized in paint cross-sections with high sensitivity and good spatial resolution (i.e. within the single painting layers) by using chemiluminescent (CL) immunochemical microscope imaging. In the present research work, we describe for the first time the immunolocalization of collagen (the main protein of animal glue) in paint cross-sections by CL imaging microscopy. Two different analytical protocols have been developed, allowing either the detection of collagen or the simultaneous detection of collagen and ovalbumin in the same paint sample. The assays were used to detect collagen and ovalbumin in cross-sections from model samples and historical paintings (a wall painting dated to 1773–1774 and a painted wood panel of the Renaissance period) in order to achieve information on paint techniques and past restoration interventions.

Rapid and sensitive detection of bacteria via platinum-labeled antibodies and on-particle ionization and enrichment prior to MALDI-TOF mass spectrometry

We introduce a rapid and sensitive approach to study the interactions of an affinity probe with the bacterial wall. Immunoglobulin was immobilized on platinum nanoparticles, and the resulting probe nanoparticles bind to bacterial walls as confirmed by transmission electron microscopy. A MALDI-MS assay was developed that can detect ~10⁵ cfu mL^?1 of S. marcescens and E. coli. This approach enables simple, rapid and straightforward detection of bacterial proteins, with high resolution and sensitivity, and without the requirement for tedious washing/separation steps.

Exploring microdischarges for portable sensing applications

This paper describes the use of microdischarges as transducing elements in sensors and detectors. Chemical and physical sensing of gases, chemical sensing of liquids, and radiation detection are described. These applications are explored from the perspective of their use in portable microsystems, with emphasis on compactness, power consumption, the ability to operate at or near atmospheric pressure (to reduce pumping challenges), and the ability to operate in an air ambient (to reduce the need for reservoirs of carrier gases). Manufacturing methods and performance results are described for selected examples.

Field-deployable whole-cell bioluminescent biosensors: so near and yet so far

The use of smart supports and bioinspired materials to confine living cells and use them for field-deployable biosensors has recently attracted much attention. In particular, bioluminescent whole-cell biosensors designed to respond to different analytes or classes of analyte have been successfully implemented in portable and cost-effective analytical devices. Significant advances in detection technology, biomaterial science, and genetic engineering of cells have recently been reported. Now the challenge is to move from benchtop traditional cell-based assays to portable biosensing devices. Improvement of the analytical performance of these biosensors depends on the availability of optimized bioluminescent reporters, and promising approaches that go beyond reporter gene technology are emerging. To enable handling of cells as ready-to-use reagents, nature-inspired strategies have been used, with the objective of keeping cells in a dormant state until use. Several issues must still be investigated, for example long-term viability of cells, the possibility of performing real-time analysis, and multiplexing capability.

Quantum dot-based lateral flow immunoassay for detection of chloramphenicol in milk

A novel rapid (20 min) fluorescent lateral flow test for chloramphenicol (CAP) detection in milk was developed. The chosen format is a binding-inhibition assay. Water-soluble quantum dots with an emission peak at 625 nm were applied as a label. Milk samples were diluted by 20 % with phosphate buffer to eliminate the matrix effect. The result of the assay could be seen by eye under UV light excitation or registered by a portable power-dependent photometer. The limit of CAP detection by the second approach is 0.2 ng/mL, and the limit of quantitation is 0.3 ng/mL.

High-Energy Collision-Induced Dissociation by MALDI TOF/TOF Causes Charge-Remote Fragmentation of Steroid Sulfates

A method for structural elucidation of biomolecules dating to the 1980s utilized high-energy collisions (~10 keV, laboratory frame) that induced charge-remote fragmentations (CRF), a class of fragmentations particularly informative for lipids, steroids, surfactants, and peptides. Unfortunately, the capability for high-energy activation has largely disappeared with the demise of magnetic sector instruments. With the latest designs of tandem time-of-flight mass spectrometers (TOF/TOF), however, this capability is now being restored to coincide with the renewed interest in metabolites and lipids, including steroid-sulfates and other steroid metabolites. For these metabolites, structure determinations are required at concentration levels below that appropriate for NMR. To meet this need, we explored CRF with TOF/TOF mass spectrometry for two groups of steroid sulfates, 3-sulfates and 21-sulfates. We demonstrated that the current generation of MALDI TOF/TOF instruments can generate charge-remote fragmentations for these materials. The resulting collision-induced dissociation (CID) spectra are useful for positional isomer differentiation and very often allow the complete structure determination of the steroid. We also propose a new nomenclature that directly indicates the cleavage sites on the steroid ring with carbon numbers.

In situ NMR spectroelectrochemistry for the structure elucidation of unstable intermediate metabolites

In situ NMR spectroelectrochemistry is presented in this study as a useful hybrid technique for the chemical structure elucidation of unstable intermediate species. An experimental setting was designed to follow the reaction in real time during the experimental electrochemical process. The analysis of ¹H NMR spectra recorded in situ permitted us (1) to elucidate the reaction pathway of the electrochemical oxidation of phenacetin and (2) to reveal the quinone imine as a reactive intermediate species without using any trapping reaction. Phenacetin has been considered as hepatotoxic at high therapeutic amounts, which is why it was chosen as a model to prove the applicability of the analytical method. The use of 1D and 2D NMR experiments led to the elucidation of the major species produced from the oxidation process. We demonstrated that in situ NMR spectroelectrochemistry constitutes a fast way for monitoring unstable quinone imines and elucidating their chemical structures.

Paper-based three-dimensional microfluidic device for monitoring of heavy metals with a camera cell phone

A 3D paper-based microfluidic device has been developed for colorimetric determination of selected heavy metals in water samples by stacking layers of wax patterned paper and double-sided adhesive tape. It has the capability of wicking fluids and distributing microliter volumes of samples from single inlet into affrays of detection zones without external pumps, thus a range of metal assays can be simply and inexpensively performed. We demonstrate a prototype of four sample inlets for up to four heavy metal assays each, with detection limits as follows: Cu (II)?=?0.29 ppm, Ni(II)?=?0.33 ppm, Cd (II)?=?0.19 ppm, and Cr (VI)?=?0.35 ppm, which provided quantitative data that were in agreement with values gained from atomic absorption. It has the ability to identify these four metals in mixtures and is immune to interferences from either nontoxic metal ions such as Na(I) and K(I) or components found in reservoir or beach water. With the incorporation of a portable detector, a camera mobile phone, this 3D paper-based microfluidic device should be useful as a simple, rapid, and on-site screening approach of heavy metals in aquatic environments.

Analysis of egg-based model wall paintings by use of an innovative combined dot-ELISA and UPLC-based approach

The chemical analysis of egg-based wall paintings—the mezzo fresco technique—is an interesting topic in the characterisation of organic binders. A revised procedure for a dot-enzyme-linked immunosorbent assay (dot-ELISA) able to detect protein components of egg-based wall paintings is reported. In the new dot-ELISA procedure we succeeded in maximizing the staining colour by adjusting the temperature during the staining reaction. Quantification of the colour intensity by visible reflectance spectroscopy resulted in a straight line plot of protein concentration against reflectance in the wavelength range 380–780 nm. The modified dot-ELISA procedure is proposed as a semi-quantitative analytical method for characterisation of protein binders in egg-based paintings. To evaluate its performance, the method was first applied to standard samples (ovalbumin, whole egg, egg white), then to model specimens, and finally to real samples (Giotto’s wall paintings). Moreover, amino acid analysis performed by innovative ultra-performance liquid chromatography was applied both to standards and to model samples and the results were compared with those from the dot-ELISA tests. In particular, after protein hydrolysis (24 h, 114 °C, 6 mol L^?1 HCl) of the samples, amino acid derivatization by use of 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate enabled reproducible analysis of amino acids. This UPLC amino acid analysis was rapid and reproducible and was applied for the first time to egg-based paintings. Because the painting technique involved the use of egg-based tempera on fresh lime-based mortar, the study enabled investigation of the effect of the alkaline environment on egg-protein detection by both methods.

Detection of follicular transport of lidocaine and metabolism in adipose tissue in pig ear skin by DESI mass spectrometry imaging

Desorption electrospray ionization (DESI) mass spectrometry imaging is demonstrated as a detection technique for penetration experiments of drugs in skin. Lidocaine ointment was used as the model compound in ex vivo experiments with whole pig ears as the skin model. Follicular transport of lidocaine into the deeper skin layers is demonstrated for the first time. Furthermore, metabolism of lidocaine to 3-OH-lidocaine was observed in subcutaneous tissue as well as in lobules of white adipose tissue surrounding the hair follicles. These results suggest that it is advantageous to use full thickness skin, including subcutaneous tissue, for skin metabolism studies.

Preparation of a nanocomposite film from poly(diallydimethyl ammonium chloride) and gold nanoparticles by in-situ electrochemical reduction, and its application to SERS spectroscopy and sensing of ascorbic acid

A nanocomposite film is described that is composed of alternating layers of poly(diallydimethyl ammonium chloride) and gold nanoparticles that interact through electrostatic forces. The films of varying thickness were prepared by the layer-by-layer technique, and Au-NPs were generated by electrochemical reduction of hexachloroauric acid. The composite films were characterized by UV?Cvis spectroscopy, X-ray photoelectron spectroscopy, and cyclic voltammetry. Most nanocomposite films exhibit linear, uniform, and regular layer-by-layer growth during the process of formation. The films exhibit unique performance in terms of surface enhanced Raman scattering and electrocatalytic activitiy towards the oxidation of ascorbic acid.

Matrix Segregation as the Major Cause for Sample Inhomogeneity in MALDI Dried Droplet Spots

The segregation in dried droplet MALDI sample spots was analyzed with regard to the matrix-to-sample ratio using optical microscopy, MALDI imaging mass spectrometry (MALDI MSI) and IR imaging spectroscopy. In this context, different polymer/matrix/solvent systems usually applied in the analysis of synthetic polymers were investigated. The use of typical matrix concentrations (10 mg mL^?1) in almost every case resulted in ring patterns, whereas higher concentrated matrix solutions always led to homogeneous sample spot layers. The data revealed that segregation is predominantly caused by matrix transport in the drying droplet, whereas polymer segregation seems to be only secondary.

Ancient Roman wall paintings mapped nondestructively by portable NMR

The stratigraphies of decorated walls in ancient Herculaneum, Italy, were analyzed by single-sided ¹H NMR. A large version of the NMR-MOUSE® with a maximum penetration depth of 25 mm was used to map proton density profiles at different positions of the Mosaic of Neptune and Amphitrite showing considerable differences between different tesserae and the mortar bed at different times of the year. In the House of the Black Room, different mortar layers were observed on painted walls as well as different proton content in different areas due to different moisture levels and different conservation treatments. The proton density profiles of the differently treated areas indicated that one method leads to higher moisture content than the other. Untreated wall paintings from different times were profiled in a recently excavated room at the Villa of the Papyri showing two different types of mortar layer structures which identify two different techniques of preparing the walls for painting. Reflectance Fourier mid-infrared spectroscopy and in situ X-ray fluorescence measurements complemented the NMR measurements and provided additional insight into the identification of organic coatings as well as the nature of the pigments used, respectively. The information acquired nondestructively by NMR is valued for elaborating conservation strategies and for identifying different schools of craftsmen who prepared the mortar supports of the wall paintings.     

Rapid and sensitive lateral flow immunoassay for influenza antigen using fluorescently-doped silica nanoparticles

We report on a lateral flow immunoassay (LFIA) for influenza A antigen using fluorescently-doped silica nanoparticles as reporters. The method is taking advantage of the high brightness and photostability of silica nanoparticles (doped with the dye Cy5) and the simplicity and rapidity of LFIA. The nucleoprotein of influenza A virion (one of its most abundant structural proteins) was used as a model to demonstrate a performance of the LFIA. Under optimized conditions and by using a portable strip reader, the fluorescence-based LFIA is capable of detecting a recombinant nucleoprotein as low as 250 ng?·?mL^-1 using a sample volume of 100 μL, within 30 min, and without interference by other proteins. The successful detection of the nucleoprotein in infected allantoic fluid demonstrated the functionality of the method. By comparison with a commercial influenza A test based on gold nanoparticles as reporters, the system provides an 8-fold better sensitivity.

Identification of additives in poly(vinylacetate) artist’s paints using PY-GC-MS

Commercial poly(vinyl acetate) (PVAc) paint formulations for artists include a number of compounds in addition to the PVAc polymer and pigments to improve the physical and chemical properties of the resulting product. Among the most common additives are surfactants, coalescing agents, defoamers, freeze–thaw agents and thickeners. These products significantly influence the behaviour of the dried film. Nevertheless, they are usually difficult to detect with conventional analytical methods given their low concentration. In order to identify these additives, present in the dried film as minor components, an analytical method based on in situ thermally assisted pyrolysis–silylation gas chromatography–mass spectrometry (GC-MS) using hexamethyldisilazane as a derivatisation reagent is proposed. This method improves the conventional GC-MS analysis performed by direct pyrolysis and enables the simultaneous identification of the PVAc binding medium and the additives included by the manufacturer in the commercial paint. Five different commercial PVAc paints have been analysed, namely, armour green, burnt umber, oriental red, raw umber and white from Flashe®. Internal plasticiser VeoVa consisting of C₁₀ fatty acids with highly branched chains has been recognised from the MS spectra. On the other hand, the differences found in the additive content of the studied paints, in particular the poly(ethylene glycol)-type surfactant, are in good agreement with their mechanical properties.

HRMAS NMR spectroscopy combined with chemometrics as an alternative analytical tool to control cigarette authenticity

In this paper, we present for the first time the use of high-resolution magic angle spinning nuclear magnetic resonance (HRMAS NMR) spectroscopy combined with chemometrics as an alternative tool for the characterization of tobacco products from different commercial international brands as well as for the identification of counterfeits. Although cigarette filling is a very complex chemical mixture, we were able to discriminate between dark, bright, and additive-free cigarette blends belonging to six different filter-cigarette brands, commercially available, using an approach for which no extraction procedure is required. Second, we focused our study on a specific worldwide-distributed brand for which established counterfeits were available. We discriminated those from their genuine counterparts with 100 % accuracy using unsupervised multivariate statistical analysis. The counterfeits that we analyzed showed a higher amount of nicotine and solanesol and a lower content of sugars, all endogenous tobacco leaf metabolites. This preliminary study demonstrates the great potential of HRMAS NMR spectroscopy to help in controlling cigarette authenticity.

Study of metabonomic profiles of human esophageal carcinoma by use of high-resolution magic-angle spinning 1H NMR spectroscopy and multivariate data analysis

Esophageal carcinoma (EC) is one of the most common malignant tumors. EC survival has remained disappointingly low because of the high malignancy of esophageal cancer and the lack of obvious clinical symptoms at an early stage. Early diagnosis is often difficult because the small tumor nodules are frequently missed. Metabonomics based on high-resolution magic-angle spinning (HRMAS) NMR has been popular for tumor detection because it is highly sensitive, provides rich biochemical information and requires no sample pretreatment. ¹H HRMAS spectra of non-involved adjacent esophageal tissues and of well differentiated and moderately differentiated esophageal carcinoma tumors were recorded and analyzed by use of multivariate and statistical analysis techniques. Moderately differentiated EC tumors were found to have increased total choline, alanine, and glutamate and reduced creatine, myo-inositol, and taurine compared with non-involved adjacent tissues. Moreover, clear differences between the metabonomic profiles of EC tissues enabled tumor differentiation. Furthermore, the integral Gly/MI ratio for samples of different tissue types were statistically significantly different; this was sufficient both for distinguishing non-involved tissues from esophageal carcinoma and for classification of well differentiated and moderately differentiated EC tumors.

Gold electrodes modified with gold nanoparticles and thio compounds for electrochemical sensing of dopamine alone and in presence of potential interferents. A comparative study

Gold electrodes were modified with self assembled layers (SAMs) composed of mercaptopropionic acid, thiodipropionic acid, dithiodipropionic acid, cysteamine and gold nanoparticles and used to study the electrooxidation of dopamine (DA) in solution at pH 7. SAMs endowed with gold nanoparticles gave the highest catalytic effect. The results showed that such electrodes are capable of resolving the oxidation peaks of DA, ascorbic acid, and uric acid which is most favourable with respect to the detection of DA in physiological matrices.