From stability to permeability of adhesive emulsion bilayers

Water drops dispersed in chloroform and stabilized with phospholipids become adhesive if a bad solvent for lipids, such as silicone oil, is added to the continuous phase. In this way, two sticking drops are separated by a bilayer of phospholipids. By using microfluidic technologies, we probe the stability and properties of such membranes likewise encountered in foams or vesicles. We first establish the stability diagram of adhering drop pairs as a function of the continuous phase composition. We found two regimes of destabilization of the bilayer. The first one concerns a competition between the dynamics of adhesion and the transport of surfactants toward the interfaces that leads to a dilute surfactant coverage. The second one corresponds to a dense surface coverage where the lifetime distribution of the bilayer exponentially decreases as a signature of a nucleation process. In the stable regime, we observe the propagation of adhesion among a concentrated collection of drops. This is another remarkable illustration of the suction consequence when two close deformable objects are pulled apart. Moreover, the present experimental strategy offers a novel way to study the phase diagrams of bilayers from a single phospholipid to a mixture of phospholipids. Indeed, we detect phase transitions at a liquid-liquid interface that are ruled by the amount of bad solvent. Finally, we probe the transport of water molecules through the bilayer and show that its permeability is linked to the adhesion energy that reflects its fluidity.     

Solvent-free coarse-grained lipid model for large-scale simulations

A coarse-grained molecular model, which consists of a spherical particle and an orientation vector, is proposed to simulate lipid membrane on a large length scale. The solvent is implicitly represented by an effective attractive interaction between particles. A bilayer structure is formed by orientation-dependent (tilt and bending) potentials. In this model, the membrane properties (bending rigidity, line tension of membrane edge, area compression modulus, lateral diffusion coefficient, and flip-flop rate) can be varied over broad ranges. The stability of the bilayer membrane is investigated via droplet-vesicle transition. The rupture of the bilayer and worm-like micelle formation can be induced by an increase in the spontaneous curvature of the monolayer membrane.     

嵌段序列对聚合物囊泡形成过程影响的Monte Carlo模拟

采用Monte Carlo模拟方法研究了具有相同链长和组分比的不同嵌段序列的AB两嵌段共聚物与ABA三嵌段共聚物在选择性溶剂中形成囊泡的动力学过程. 模拟结果表明, AB两嵌段共聚物囊泡的形成与ABA三嵌段共聚物囊泡的形成的动力学过程不同. 在慢速退火条件下, ABA三嵌段共聚物囊泡是通过亲水链段向胶束的表面和中心扩散而形成的, 而AB两嵌段共聚物囊泡则由片层弯曲闭合而形成. 相对而言, 退火速度对AB两嵌段共聚物囊泡形成的动力学过程没有显著影响, 其改变仅影响亲水链段与疏水链段发生相分离的难易程度. 当退火速度较快时, 亲水链段和疏水链段发生相分离的速度较快且相分离发生在囊泡形成之前; 而当退火速度较慢时亲水链段和疏水链段之间的相分离在囊泡形成之后仍在进行.     

How preparation and modification parameters affect PB‐PEO polymersome properties in aqueous solution

The effect of formation and modification methods on the physical properties of polymersomes is critical for their use in applications relying on their ability to mimic functional properties of biological membranes. In this study, we compared two formation methods for polymersomes made from polybutadiene‐polyethylene oxide diblock copolymers: detergent‐mediated film rehydration (DFR) and solvent evaporation (SE). DFR‐prepared polymersomes showed a three times higher permeability compared to SE‐prepared polymersomes as revealed by stopped‐flow light scattering. SE‐prepared polymersomes broke down faster to structures <50 nm diameter when processed with extrusion, which was more pronounced at 5 mg mL^?1, compared to 10, 20, and 25 mg mL^?1. Our results indicate that the bilayer of SE‐prepared polymersomes has a lower apparent fluidity. We also investigated the role of n‐octyl‐β‐d ‐glucopyranoside (OG), a detergent typically used for reconstitution of membrane proteins into lipid bilayers. Specifically, we compared dialysis and biobeads for OG removal to investigate the influence of these methods on bilayer conformation and polymer rearrangement following detergent removal. There was no significant difference found between method, temperature, or time within each method. Our findings provide insight on how biocompatible polymersome production affects the physical properties of the resulting polymersomes. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1581–1592     

A Morphological Transition of Inverse Mesophases of a Branched‐Linear Block Copolymer Guided by Using Cosolvents

We report here a strategy for influencing the phase and lattice of the inverse mesophases of a single branched‐linear block copolymer (BCP) in solution which does not require changing the structure of the BCP. The phase of the self‐assembled structures of the block copolymer can be controlled ranging from bilayer structures of positive curvature (polymersomes) to inverse mesophases (triply periodic minimal surfaces and inverse hexagonal structures) by adjusting the solvent used for self‐assembly. By using solvent mixtures to dissolve the block copolymer we were able to systematically change the affinity of the solvent toward the polystyrene block, which resulted in the formation of inverse mesophases with the desired lattice by self‐assembly of a single branched‐linear block copolymer. Our method was also applied to a new solution self‐assembly method for a branched‐linear block copolymer on a stationary substrate under humidity, which resulted in the formation of large mesoporous films. Our results constitute the first controlled transition of the inverse mesophases of block copolymers by adjusting the solvent composition.     

Droplet shape analysis and permeability studies in droplet lipid bilayers

We apply optical manipulation to prepare lipid bilayers between pairs of water droplets immersed in an oil matrix. These droplet pairs have a well-defined geometry allowing the use of droplet shape analysis to perform quantitative studies of the dynamics during bilayer formation and to determine time-dependent values for the droplet volumes, bilayer radius, bilayer contact angle, and droplet center-line approach velocity. During bilayer formation, the contact angle rises steadily to an equilibrium value determined by the bilayer adhesion energy. When there is a salt concentration imbalance between droplets, there is a measurable change in the droplet volume. We present an analytical expression for this volume change and use this expression to calculate the bilayer permeability to water.     

Supported lipid bilayers on spacious and pH-responsive polymer cushions with varied hydrophilicity

We report the successful formation of supported multicomponent lipid bilayer membranes (sLBMs) on polymer cushions consisting of a set of alternating maleic acid copolymers. The formation of sLBMs was triggered by a transient reduction of the electrostatic repulsion between the polymer cushions and the lipid vesicles by lowering the solution's pH to 4. Upon formation, the stability of the sLBMs was not affected by subsequent variations of the environmental pH. The degree of hydrophilicity and swelling of the anionic polymer cushions was found to determine both the kinetics of the membrane formation and the mobility of the lipid bilayer with lipid diffusion coefficients in the range from 0.26 to 2.6 microm2s(-1). The introduced polymer cushion system is concluded to provide a versatile base for the integration of active transmembrane proteins in sLBMs.     

Effect of the structure of ethylene oxide-propylene oxide block copolymers on their interaction with biological membranes

Partition coefficients of ethylene oxide-propylene oxide block copolymers between the lipid phase and water have been estimated via equilibrium dialysis. It has been shown that for the triblock copolymer (Pluronic L61), the partition coefficient is 45 ± 9, while for the diblock copolymer (REP), this parameter is as high as 78 ± 17. The effect of the copolymers on the permeation of the charged organic ion carboxyfluorescein across the lecithin bilayer membrane changes in the same direction. Even though the triblock copolymer binding is weaker, it shows a stronger effect on the rate of transbilayer migration of lipids and on the permeation of the uncharged substance (doxorubicin). The incorporation of cholesterol into the membrane decreases its sensitivity to the action of copolymers; however, the character of changes induced by both copolymers remains invariable. The experimental data of this study indicate that the triblock structure of amphiphilic macromolecules is responsible for their higher ability to disturb lipid bilayer membranes.     

Lamellar-to-cubic phase change in phospholipid bilayer systems incorporated with block copolymers: DMPC and PEO-PPO-PEO (P85)

We have used small-angle X-ray scattering and calorimetric methods to investigate the temperature-dependent phase behavior of ternary systems of phospholipid (DMPC), amphiphilic PEO-PPO-PEO block copolymer (Pluronics P85), and water. It is shown that a relatively small amount of block copolymers ( approximately 3 wt %) results in a lamellar-to-cubic phase transition. Still, both the bilayer-characteristic main transition, associated with chain melting, and the pretransition, associated with in-plane modulations, are preserved for copolymer concentrations up to 50-70 wt %, indicating the preservation of a bilayer type of lipid organization also within the cubic phase. The main transition splits up into two transitions upon the addition of copolymers, one resembling the high cooperativity of the main transition and one broad transition which may reflect complex formation with the copolymers. Parallel studies incorporating poly(ethylene glycol) into the DMPC multilamellar vesicles do not give analogous structural changes. It is concluded that the major effect on the molecular scale of adding PEO-PPO-PEO block copolymers is not only due to the hydration of the membrane but also due to the incorporation of the PPO block into the bilayer structure.     

Mixed hybrid bilayer lipid membrane incorporating valinomycin: improvements in preparation and functioning

The paper deals with the reconstruction of lipid bilayer membranes on a Au-covered polycarbonate membrane. Such a kind of like-biomembranes (namely mixed hybrid bilayer lipid membrane (MHBLM)) are characterised by appreciable long-term stability. Here we describe changes that have been made in the geometry of the experimental device in order to avoid artefacts and render membrane reproduction easier. Incorporation of valinomycin was performed to check the membrane and its stability: conductance and membrane potential following the changes of ion concentration were recorded. This new approach permits increase of successful trials and renders possible, when it breaks, easily formation of a new MHBLM on the same Au-covered polycarbonate membrane support. Finally, the stability shown by the MHBLM renders this system a promising tool for use under flowing conditions.     

Fabrication of polymersomes with controllable morphologies through dewetting w/o/w double emulsion droplets

In this work, monodisperse giant polymersomes are fabricated by dewetting of water-in-oil-in-water double emulsion droplets which are assembled by amphiphilic block copolymer molecules in a microfluidic device. The dewetting process can be tuned by solvation between solvent and amphiphilic block copolymer to get polymersomes with controllable morphology. Good solvent(chloroform and toluene) hinders dewetting process of double emulsion droplets and gets acornlike polymersomes or patched polymersomes. On the other hand, poor solvent(hexane) accelerates the dewetting process and achieves complete separation of inner water phase from oil phase to form complete bilayer polymersomes. In addition, twin polymersomes with bilayer membrane structure are formed by this facile method. The formation mechanism for different polymersomes is discussed in detail.     

Physical deposition behavior of charged amphiphilic diblock copolymers: Effect of charge distribution and electric field

Coarse-grained molecular dynamics simulations are used to investigate physical deposition behavior of charged amphiphlic diblock copolymers. The effects of solvent selectivity, charge distribution in amphiphlic diblock copolymers, and electric field strength on deposition conformations are studied qualitatively. Flat amphiphilic bilayers, which consist of hydrophilic monolayer and hydrophobic brush, are formed by physical deposition of charged amphiphlic diblock copolymers in nonselective solvents. For physically deposited amphiphlic diblock copolymers in selective solvents, amphiphilic bilayers consist of disc-shaped hydrophilic monolayers and hydrophobic nanospheres are found. This study sheds light on the formation of various amphiphlic diblock copolymer deposition conformations in different solvents and interaction mechanism of different components. Furthermore, the evolution of physical deposition process of charged amphiphlic diblock copolymers layer offers new insight to the controlling of amphiphilic bilayer thickness, hydrophobic nanosphere size, and interface property of depositional amphiphlic diblock copolymers.     

533—Structure and transport properties of artificial bipolar lipid membranes

The membranes of thermophilic archaebacteria are characterized by the presence of unusual bipolar saturated isoprenoid lipids. In order to investigate their molecular arrangement in the membrane and a possible influence on transport properties, we studied black films made from lipids of Caldariella acidophila, one of the most thermophilic archaebacteria. Details on the kinetics of formation at various temperatures are presented.Capacitance, compressibility and valinomycin-induced conductance values are compared with the corresponding data for a glycerol-monooleate (GMO) bilayer. A very peculiar behavior is presented by the bipolar lipid films studied. In fact, the values of conductance are more than two orders of magnitude lower than those of a GMO bilayer, while the values of capacitance and compressibility do not depend appreciably on the solvent in which the lipid is dispersed (in contrast with a GMO bilayer, where there is a 100% change).The results are discussed in terms of a proposed model of a monolayer organization of bipolar lipids and of the unusual composition of the hydrophobic core of the membrane.     

Aqueous dispersions of cubic lipid–water phases

Inverse lipid–water phases such as cubic phases can form kinetically stable dispersions by fragmentation in water. Cubic lipid phases can be dispersed by polar lipids favoring lamellar phases or by block copolymers, which can close the bilayer at the surface so that the hydrocarbon chain core is not exposed to water. Monodisperse particles based on glycerol monooleate, with their bilayer curved as the P-, D- or G-minimal surface, have been prepared in this way. Their inner bilayer conformation and outer shape have been examined, mainly by X-ray diffraction and cryo transmission electron microscopy. There is also a different type of cubic lipid bilayer particles with a periodicity in the micrometer range, which have been identified in phospholipid–water dispersions and in cell membrane assemblies. The mechanism behind formation in vivo of such cubic membranes, which also follow the P-, D- and G-surfaces, is discussed. Other lipid–water dispersions with lower symmetry are finally considered; dispersions formed by the inverse hexagonal phase and the dispersed state of a tetragonal bilayer structure formed by lung surfactants.     

Preparation of trimethylsilyl group containing copolymer for negative-type photoresists that enable stripped by an alkaline solution

A series of four trimethylsilyl group containing copolymers were synthesized using the solution free-radical copolymerization with azobisisobutyronitrile (AIBN) in 1,4-dioxane at 60 °C. The photoresists were prepared by dissolving copolymer, one of two kind photosensitizer (dimethylaminoethyl methacrylate and diethylaminoethyl methacrylate) and Michler's ketone in tetrahydrofuran (THF). The cyclic maleimide group was responsible for the high thermal stabilities. After irradiation by a deep-ultraviolet light and development with mixed solvent (methyl isobutyl ketone:2-propanol=1:3), the developed patterns showed negative images and exhibited good adhesion to the silicon wafer without using any adhesion promoter. The resolution of the resists was at least 1.75 μm and the oxygen plasma etching rate was 1/6 of hard-baked HPR-204, which can be also used as the top-imaging layer of a bilayer resist for microlithographic application. These photoresists can be stripped by week alkaline solution such as sodium carbonate solution (0.01 wt.%) after exposure.     

Preparation and properties of Si-containing copolymer for near-UV resist. I. Poly(N-(4-hydroxyphenyl) maleimidealt-p-trimethylisilylstyrene)

A new negative near-UV photoresist consisting of poly(N-(4-hydroxyphenyl) maleimidealt-p-trimethylisilylstyrene) (PHMS) and a naphthoquinonediazide ester was developed. PHMS was synthesized by solution free-radical polymerization of the comonomers with azobisisobutyronitrile (AIBN) in 1,4-dioxane at 60°C. The preparation of PHMS in terms of reaction time, thermal initiator, and solvent was evaluated; and a series of different molecular weight copolymers were prepared. PHMS was 1: 1 in composition and was predominantly alternating. These copolymers dissolved in a wide range of solvents (including 5% tetramethylammonium hydroxide). The thermal properties of these copolymers were investigated by DSC and TGA. The chain-stiffening effect of the maleimide group played an important role in effecting high thermal resistance. Near-UV exposure was carried out using a Canon PLA-501F contact printer. High resolution negative images were obtained which had resistance to thermal deformation at 330°C and above. The developed patterns exhibited good adhesion to the silicon substrates without the use of an adhesion promoter. The lithographic applications of a bilayer photoresist system in which the prepared resist was used as the top imaging layer were examined. It is supposed that if PHMS was used as a binder for a diazonaphthoquions sulfonate (NDS) photochemically, positive images would be obtained; however, on the contrary, negative images were observed. It is proposed that photocrosslinking occurred in the PHMS main chain.     

Solubilization of homopolymers in a solution of diblock copolymers

We study theoretically mixed solutions of homopolymer and diblock copolymer chains. The solvent is a poor solvent for the homopolymers and a selective solvent for the copolymers. We find that the formation of copolymer micelles containing also the insoluble chains allows for an increased solubility of the homopolymers in the solution. In agreement with experiments, we find also that the solubilization power of the micelles, that is, the maximum amount of total homopolymer weight solubilized per unit weight of copolymers in solution, decreases strongly with the homopolymer index of polymerization.     

Determination of the lipid bilayer breakdown voltage by means of linear rising signal

Electroporation is characterized by formation of structural changes within the cell membrane, which are caused by the presence of electrical field. It is believed that "pores" are mostly formed in lipid bilayer structure; if so, planar lipid bilayer represents a suitable model for experimental and theoretical studies of cell membrane electroporation. The breakdown voltage of the lipid bilayer is usually determined by repeatedly applying a rectangular voltage pulse. The amplitude of the voltage pulse is incremented in small steps until the breakdown of the bilayer is obtained. Using such a protocol each bilayer is exposed to a voltage pulse many times and the number of applied voltage pulses is not known in advance. Such a pre-treatment of the lipid bilayer affects its stability and consequently the breakdown voltage of the lipid bilayer. The aim of this study is to examine an alternative approach for determination of the lipid bilayer breakdown voltage by linear rising voltage signal. Different slopes of linear rising signal have been used in our experiments (POPC lipids; folding method for forming in the salt solution of 100 mM KCl). The breakdown voltage depends on the slope of the linear rising signal. Results show that gently sloping voltage signal electroporates the lipid bilayer at a lower voltage then steep voltage signal. Linear rising signal with gentle slope can be considered as having longer pre-treatment of the lipid bilayer; thus, the corresponding breakdown voltage is lower. With decreasing the slope of linear rising signal, minimal breakdown voltage for specific lipid bilayer can be determined. Based on our results, we suggest determination of lipid bilayer breakdown voltage by linear rising signal. Better reproducibility and lower scattering are obtained due to the fact that each bilayer is exposed to electroporation treatment only once. Moreover, minimal breakdown voltage for specific lipid bilayer can be determined.     

Influence of the block hydrophilicity of AB2 miktoarm star copolymers on cluster formation in solutions

We investigated the formation of various micelle shapes of lipid-like amphiphilic AB(2) miktoarm star copolymers in a solution, by performing dissipative particle dynamics simulations. AB(2) miktoarm star copolymer molecules are modeled with coarse-grained structures that consist of a relatively hydrophilic head (A) group with a single arm and a hydrophobic tail (B) group with double arms. A decrease in the hydrophilicity of the head group leads to a reduction of the polymer-solvent contact area, causing cluster structure changes from spherical micelles to vesicles. Consequently, a spherical exterior with multi-lamellar or cylindrical phase interior structures forms under poor solvent conditions without the introduction of spherical hard-wall containers. Furthermore we observed that, for small head group lengths, vesicles were formed in much wider range of solvent-head interaction strength than for long head groups, indicating that molecules with short head group offer a superior vesicle forming property. A phase diagram, the structure and kinetics of the cluster formation, a density profile, and a detailed shape analysis are presented to discuss the molecular characteristics of potential candidates for drug carriers that require superior and versatile vesicle forming properties. We also show that, under certain solvent-hydrophilic head group interaction conditions, initially formed cylindrical micelles transform to bilayer fragments through redistribution of copolymers within the cluster.     

Solubilization of Membrane Proteins into Functional Lipid‐Bilayer Nanodiscs Using a Diisobutylene/Maleic Acid Copolymer

Once removed from their natural environment, membrane proteins depend on membrane‐mimetic systems to retain their native structures and functions. To this end, lipid‐bilayer nanodiscs that are bounded by scaffold proteins or amphiphilic polymers such as styrene/maleic acid (SMA) copolymers have been introduced as alternatives to detergent micelles and liposomes for in vitro membrane‐protein research. Herein, we show that an alternating diisobutylene/maleic acid (DIBMA) copolymer shows equal performance to SMA in solubilizing phospholipids, stabilizes an integral membrane enzyme in functional bilayer nanodiscs, and extracts proteins of various sizes directly from cellular membranes. Unlike aromatic SMA, aliphatic DIBMA has only a mild effect on lipid acyl‐chain order, does not interfere with optical spectroscopy in the far‐UV range, and does not precipitate in the presence of low millimolar concentrations of divalent cations.