基于表面增强拉曼光谱的重金属离子检测

以对巯基苯甲酸为拉曼标记和自组装修饰分子, 在光亮金基底上修饰后作为检测基底, 在金纳米粒子表面修饰后获得具有表面增强拉曼光谱信号的标记金溶胶. 修饰的基底及纳米离子通过重金属离子与羧基端的配位而发生相互作用, 最终形成“金属基底-对巯基苯甲酸/重金属离子/对巯基苯甲酸-金属纳米颗粒”的三明治结构. 采用扫描电镜表征纳米粒子的组装及以表面增强拉曼光谱检测表面标记分子的信号, 以此实现重金属离子的检测. 以强螯合剂EDTA溶液淋洗三明治结构, 使重金属离子与金属基底以及纳米颗粒上的羧基的配位作用断裂, 获得可再次利用的修饰金基底.     

In situ synthesis of water dispersible bovine serum albumin capped gold and silver nanoparticles and their cytocompatibility studies

A simple and convenient one step room temperature method is described for the synthesis of bovine serum albumin (BSA) capped gold and silver nanoparticles. BSA reduces silver ions to silver nanoparticles but does not directly reduce gold ions to gold nanoparticles at room temperature and varying pH conditions. However, when silver and gold ions are simultaneously added to BSA, silver ions get reduced to metallic silver first and these in turn reduce gold ions to gold nanoparticles through a galvanic exchange reaction. The so synthesized silver and gold nanoparticles are easily water dispersible and can withstand addition of salt even at high concentrations. It is shown that the capped protein retains its secondary structure and the helicity to a large extent on the nanoparticles surface and that the protein capping makes the nanoparticles cytocompatible.     

Functionalized gold nanoparticles as phosphorescent nanomaterials and sensors

Ligand-capped gold nanoparticles were synthesized by capping monothiol derivatives of 2,2'-dipyridyl onto the surface of Au nanoparticles (Au-BT). The average size of the metal core is around 4 nm, with a shell of approximately 340 bipyridine ligands around the Au nanoparticle. The high local concentration of the chelating ligands ( approximately 5 M) around the Au nanoparticle makes these particles excellent ion sponges, and their complexation with Eu(III)/Tb(III) ions yields phosphorescent nanomaterials. Absorption spectral studies confirm a 1:3 complexation between Eu(III)/Tb(III) ions and bipyridines, functionalized on the surface of Au nanoparticles. The red-emitting Au-BT:Eu(III) complex exhibits a long lifetime of 0.36 ms with six line-like emission peaks, whereas the green-emitting Au-BT:Tb(III) complex exhibits a lifetime of 0.7 ms with four line-like emission peaks. These phosphorescent nanomaterials, designed by linking BT:Eu(III) complexes to Au nanoparticles, were further utilized as sensors for metal cations. A dramatic decrease in the luminescence was observed upon addition of alkaline earth metal ions (Ca(2+), Mg(2+)) and transition metal ions (Cu(2+), Zn(2+), Ni(2+)), resulting from an isomorphous substitution of Eu(III) ions, whereas the luminescence intensity was not influenced by the addition of Na(+) and K(+) ions. Direct interaction of bipyridine-capped Au nanoparticles with Cu(2+) ions brings the nanohybrid systems closer, leading to the formation of three-dimensional superstructures. Strong interparticle plasmon interactions were observed in these closely spaced Au nanoparticles.     

Aligned nanogold assisted one step sensing and removal of heavy metal ions

We depict a novel strategy exploiting the chemistry of metal ion adsorption for detection and sequestration of toxic heavy metal from processed water using gold nanoparticles capped with 4-aminothiophenol. The interaction between 4-aminothiophenol capped gold nanoparticles and heavy metal ions was studied as a function of time and concentration using TEM, HRTEM, SEM, EDS, and I-V characterization. Experiments confirmed that pH is one of the crucial controlling parameters. Adsorption capacity was monitored using AAS, UV-vis spectroscopy and I-V measurement. In the absence of any alloy formation between Au and heavy metal ions, the desorption of the heavy metal ions from 4-aminothiophenol capped gold nanoparticles surface by pH modulation serves as a mean of collection of heavy metal ions. Experiments revealed that the concentration of heavy metal ions in processed water after adsorption is below the maximum permissible limit set by the WHO.     

Synthesis of aqueous Au core-Ag shell nanoparticles using tyrosine as a pH-dependent reducing agent and assembling phase-transferred silver nanoparticles at the air-water interface

We demonstrate that the amino acid tyrosine is an excellent reducing agent under alkaline conditions and may be used to reduce Ag+ ions to synthesize stable silver nanoparticles in water. The tyrosine-reduced silver nanoparticles may be separated out as a powder that is readily redispersible in water. The silver ion reduction at high pH occurs due to ionization of the phenolic group in tyrosine that is then capable of reducing Ag+ ions and is in turn converted to a semi-quinone structure. These silver nanoparticles can easily be transferred to chloroform containing the cationic surfactant octadecylamine by an electrostatic complexation process. The now hydrophobic silver nanoparticles may be spread on the surface of water and assembled into highly ordered, linear superstructures that could be transferred as multilayers onto suitable supports by the versatile Langmuir-Blodgett technique. Further, tyrosine molecules bound to the surface of Au nanoparticles through amine groups in the amino acid may be used to selectively reduce silver ions at high pH on the surface of the Au nanoparticles, thus leading to a simple strategy for realizing phase-pure Au core-Ag shell nanostructures.     

Metal-ion induced transition from multi- to single-bilayer tubes in histidine bearing lipids and formation of monodisperse Au nanoparticles

We report that a histidine based cationic lipid forms multi-bilayer nanotubes and the addition of metal ions such as Cu(2+) and Au(3+) induces transformation into single-bilayer nanotubes owing to coordination of the metal ions on the nanotube surface. The morphological transition was detected with X-ray scattering and electron microscopy. IR showed that the metal coordination is presumably the major driving force. The reduction of Au(3+) ions on the tube surface produced gold nanoparticles attached on the nanotube surface. The nanoparticle was almost monodisperse with the average diameter of 1.7 nm and the standard deviation σ of 0.29, which is remarkably narrower than that of previously reported lipid systems. The obtained particles were stable and no further aggregation and growth was observed after one week, providing a powerful and facile tool for producing nanoparticles in a wide range of applications.     

Synthesis of hydroxyapatite crystals using amino acid-capped gold nanoparticles as a scaffold

Inorganic composites are of special interest for biomedical applications such as in dental and bone implants wherein the ability to modulate the morphology and size of the inorganic crystals is important. One interesting possibility to control the size of inorganic crystals is to grow them on nanoparticles. We report here the use of surface-modified gold nanoparticles as templates for the growth of hydroxyapatite crystals. Crystal growth is promoted by a monolayer of aspartic acid bound to the surface of the gold nanoparticles; the carboxylate ions in aspartic acid are excellent binging sites for Ca(2+) ions. Isothermal titration calorimetry studies of Ca(2+) ion binding with aspartic acid-capped gold nanoparticles indicates that the process is entropically driven and that screening of the negative charge by the metal ions leads to their aggregation. The aggregates of gold nanoparticles are believed to be responsible for assembly of the platelike hydroxyapatite crystals into quasi-spherical superstructures. Control experiments using uncapped gold nanoparticles and pure aspartic acid indicate that the amino acid bound to the nanogold surface plays a key role in inducing and directing hydroxyapatite crystal growth.     

Au-Pt bimetallic nanoparticles formation via viologen-mediated reduction on polymeric nanospheres

Poly(vinylbenzyl chloride) nanospheres prepared via emulsion polymerization were surface functionalized with viologen moieties. Several methods were investigated to achieve the desired high surface concentration of viologen moieties with minimal aggregation of the nanospheres. The viologen-functionalized nanospheres were used for photoinduced reduction of gold ions and platinum ions, either individually, simultaneously or sequentially, to result in the formation of well-distributed Au-Pt nanoparticles of a few nanometers on the surface of the nanospheres. UV-visible absorption spectroscopy and XPS analyses of these bimetallic nanoparticles were carried out. The reaction time and the sequence of the reduction process play an important role in determining the composition of the bimetallic nanoparticles. High-resolution transmission electron microscopy analysis reveals the highly crystalline nature of the bimetallic nanoparticles.     

Self-organization of surfactant-metal-ion complex nanofibers on graphite surfaces and their application to fibrously concentrated platinum nanoparticle formation

We report the fabrication of self-organized surfactant nanofibers containing platinum ions on a highly oriented pyrolytic graphite (HOPG) surface from mixed solutions of hexadecyltrimethylammonium hydroxide (C16TAOH) and hydrogen hexachloroplatinate (IV) (H2PtCl6). The fibrous surfactant self-assembly was stable in air, even after being soaked in water, in contrast to surfactant hemicylindrical micelles, which are stable only at graphite/solution interfaces. The results show that the graphite surface served as an essential template for the specific formation of fibrous surfactant self-assemblies. In addition, when surfactant nanofibers containing metal ions were treated with hydrazine, platinum nanoparticles concentrated in the nanofibers formed on the HOPG surface. We also prepared surfactant nanofibers containing gold ions on HOPG surfaces and formed gold nanoparticles in the nanofibers.     

Chemically binding Eu^3＋ onto CdS semiconductor nanoparticle surface

Europium ions were chemically bound to CdS nanoparticles surface by diethylenetri-aminepentaacetate (DTPA, 1) in a two-step synthetic route. First 1 was applied to chelate with cadmium on the surface of cadmium-rich CdS nanoparticles and act as a capping agent. Further, the purified 1-capped particles were used to bind with Eu~3 . The purified and redispersed particles were characterized by photoluminescence spectroscopy, TEM and SEM. It was observed that Eu~3 on the nanoparticle surface significantly increased the band gap emission and decreased the surface emission intensity of the CdS nanoparticles.     

Nanoparticle-modified monolithic pipette tips for phosphopeptide enrichment

We have developed nanoparticle-modified monoliths in pipette tips for selective and efficient enrichment of phosphopeptides. The 5 μL monolithic beds were prepared by UV-initiated polymerization in 200 μL polypropylene pipette tips and either iron oxide or hydroxyapatite nanoparticles were used for monolith modification. Iron oxide nanoparticles were prepared by a co-precipitation method and stabilized by citrate ions. A stable coating of iron oxide nanoparticles on the pore surface of the monolith was obtained via multivalent electrostatic interactions of citrate ions on the surface of nanoparticles with a quaternary amine functionalized poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate) monolith. Hydroxyapatite nanoparticles were incorporated into the poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate) monolith by simply admixing them in the polymerization mixture followed by in situ polymerization. The nanoparticle-modified monoliths were compared with commercially available titanium dioxide pipette tips. Performance of the developed and commercially available sorbents was demonstrated with the efficient and selective enrichment of phosphopeptides from peptide mixtures of α-casein and β-casein digests followed by off-line MALDI/MS analysis.     

Raman studies on the interaction of the reactants with the platinum nanoparticle surface during the nanocatalyzed electron transfer reaction

Raman studies are conducted to understand the specific interactions between the individual reactants and the platinum nanoparticle surface during the nanocatalyzed electron transfer reaction between hexacyanoferrate (III) ions and thiosulfate ions. When Pt nanoparticles are added to the thiosulfate ion solution, a shift in the symmetric SS stretching mode is observed compared to the frequency observed for the free thiosulfate ions in solution, suggesting that binding to the Pt nanoparticle surface occurs via the S- ion. It is also observed that there are no shifts in the symmetric and asymmetric OSO bending or SO stretching frequencies. This suggests that the thiosulfate ions do not bind to the nanoparticle surface via the O- ion. When platinum nanoparticles are added to the hexacyanoferrate(III) ion solution, evidence is found for both adsorbed hexacyanoferrate(III) ions and a platinum cyanide complex. For adsorbed hexacyanoferrate(III) ions, the CN stretching frequency is observed at 2101 cm(-1) and the Fe-C stretching frequency is found at 368 cm(-1). The observed CN stretching frequencies located at 2147 and 2167 cm(-1) provide strong evidence that there is a Pt(CN)4(2-) platinum cyanide complex formed. In addition, the Pt-CN band is also observed at 2054 cm(-1). These observed bands provide spectroscopic evidence that the hexacyanoferrate(III) ions dissolve by forming a complex with the surface platinum atoms of the nanoparticles. Raman spectra of the product mixtures are obtained after the completion of the reaction when carried out with higher reactant concentrations to observe the Raman spectra, but with a similar 10:1 ratio of thiosulfate to hexacyanoferrate(III) ions as used previously, with and without PVP-Pt nanoparticles at a correspondingly higher concentration. It is observed that there are no shifts in the characteristic Raman bands associated with hexacyanoferrate(II) ions and no evidence for the formation of adsorbed hexacyanoferrate(II) species or platinum cyanide complexes in the presence of the platinum nanoparticles. In addition, there is evidence for the shifted symmetric SS stretching mode, suggesting that some of the unreacted thiosulfate (present in large excess) is bound to the Pt nanoparticle surface. Thus, under the actual reaction conditions, the hexacyanoferrate(III) ions preferentially react with adsorbed thiosulfate ions to form the reaction products, and this supports the surface catalytic mechanism we proposed previously.     

Deposition of gold nanoparticles on silica spheres by electroless metal plating technique

A previously proposed method for metal deposition with silver [Kobayashi et al., Chem. Mater. 13 (2001) 1630] was extended to uniform deposition of gold nanoparticles on submicrometer-sized silica spheres. The present method consisted of three steps: (1) the adsorption of Sn(2+) ions took place on surface of silica particles, (2) Ag(+) ions added were reduced and simultaneously adsorbed to the surface, while Sn(2+) was oxidized to Sn(4+), and (3) Au(+) ions added were reduced and deposited on the Ag surface. TEM observation, X-ray diffractometry, and UV-vis absorption spectroscopy revealed that gold metal nanoparticles with an average particle size of 13 nm and a crystal size of 5.1 nm were formed on the silica spheres with a size of 273 nm at an Au concentration of 0.77 M.     

On the applicability of nanodiamonds produced by detonation synthesis for phenol testing in aqueous media

It was found that the catalytic effect of modified nanodiamonds (MND) in the H₂O₂–4-aminoantipyrine–phenol oxidative azo coupling reaction is due to microimpurities of iron and copper ions on the surface of nanoparticles. The efficiency of MND as a catalyst is determined by the amount of surface impurities of these ions and can be doubled by their additional adsorption on nanoparticles. Using MND for phenol indication ensures a linear yield of the colored product of the azo coupling reaction over an analyte concentration range of 0.05–10 μg/mL. The possibility of reusing MND for phenol testing in aqueous samples was demonstrated.     

Enhancement of the colorimetric sensitivity of gold nanoparticles with triethanolamine to minimize interparticle repulsion

Cysteine and thioglycolic acid were immobilized on gold nanoparticles via established thiolgold surface chemistry. It is found that calcium ions rapidly induce the aggregation of the functional gold nanoparticles due to the complexation of Ca(II) by immobilized cysteine. It was also found that triethanolamine enhances the effect of calcium ions by decreasing the electrostatic repulsion between the gold nanoparticles. Transmission electron microscopy, electrophoresis, zeta potential measurements and absorptiometry were used to investigate the mechanism. Under the optimum experimental condition, the cysteine/thioglycolate/triethanolamine-modified nanoparticles were highly sensitive (the detection limit being 0.3 ??M) and selective towards calcium and magnesium ions, with a linear detection range between 1.0 ??M and 14 ??M. Based on these findings, a rapid and selective colorimetric method was developed for assaying Ca(II) ions in serum.

Colloidal stability and photophysical characteristics of luminesent silica nanoparticles modified with various nitrogen/oxygen-containing trialkoxysilanes

Surface modification of the luminescent silica nanoparticles doped with Tb(III)–p-sulfonatothiacalix[ 4]arene complex was carried out using a series of nitrogen/oxygen-containing trialkoxysilanes. It was found that groups capable of nonspecific interactions on the surface of the nanoparticles cause a significant decrease in their colloidal stability. The chromophore moieties in the modifiers were found to quench the luminescence of the nanoparticles. The surface modification of the nanoparticles is responsible for the change in the mechanism of luminescence quenching in the presence of copper(II) ions due to decreased accessibility of luminophores to the quencher.     

Synthesis of silver nanoparticles using dl-alanine for ESR dosimetry applications

The potential use of alanine for the production of nanoparticles is presented here for the first time. Silver nanoparticles were synthesized using a simple green method, namely the thermal treatment of silver nitrate aqueous solutions with dl-alanine. The latter compound was employed both as a reducing and a capping agent. Particles with average size equal to 7.5 nm, face-centered cubic crystalline structure, narrow size distribution, and spherical shape were obtained. Interaction between the silver ions present on the surface of the nanoparticles and the amine group of the dl-alanine molecule seems to be responsible for reduction of the silver ions and for the stability of the colloid. The bio-hybrid nano-composite was used as an ESR dosimeter. The amount of silver nanoparticles in the nanocomposite was not sufficient to cause considerable loss of tissue equivalency. Moreover, the samples containing nanoparticles presented increased sensitivity and reduced energetic dependence as compared with pure dl-alanine, contributing to the construction of small-sized dosimeters.     

Natural biofibers as polyfunctional ligands for metal-containing nanoparticles

Metal nanoparticles were fixed on the surface of a human hair and sheep wool through partial replacement of the citrate ions coordinated by Ag nanoparticles by ligands within the fiber, and nanoparticle growth within the fiber bulk was noted.     

Cationic Spherical Polyelectrolyte Brushes as Nanoreactors for the Generation of Gold Particles

Summary: If long polyelectrolyte chains are attached densely to colloidal latex particles, a spherical polyelectrolyte brush results. These spherical polyelectrolytes are dispersed in water and carry a high charge. We demonstrate that these systems can be used to immobilize ions of heavy metals, such as gold, as counter‐ions. Reduction of these ions leads to metallic nanoparticles. In this way the brush layer attached to the surface of the particles becomes a “nanoreactor” that may be used for chemical conversions of the metal ions. We show that the reduction of AuClequation/tex2gif-stack-1.gif ions within these nanoreactors leads to well‐defined and rather monodisperse gold nanoparticles that are attached to the surface of the core. A stable dispersion of polymeric core particles with attached nanoparticles results. All results reported here suggest that chemical reactions of ions immobilized in spherical polyelectrolyte brushes provide a new route to composite particles of inorganic and organic materials.

Transmission electron micrograph of gold particles on a core‐shell system.     

DNA Hybridization at Magnetic Nanoparticles with Electrochemical Stripping Detection

A simple and practical method for electrochemical DNA hybridization assay has been developed to take advantage of magnetic nanoparticles for ssDNA immobilization and zinc sulfide nanoparticle as oligonucleotide label. Magnetic nanoparticles were prepared by coprecipitation of Fe²⁺ and Fe³⁺ with NH₄OH, and then amino silane was coated onto the surface of magnetite nanoparticles. The magnetic nanoparticles have the advantages of easy preparation, easy surface modification and low cost. The target ssDNA with the phosphate group at the 5′ end was then covalently immobilized to the amino group of magnetite nanoparticles by forming a phosphoramidate bond in the presence of 1‐ethyl‐3‐(3‐dimeth‐ylaminopropyl)carbodiimide (EDAC). The zinc sulfide (ZnS) nanoparticle‐labeled oligonucleotides probe was used to identify the target ssDNA immobilized on the magnetic nanoparticles based on a specific hybridization reaction. The hybridization events were assessed by the dissolution of the zinc sulfide nanoparticles anchored on the hybrids and the indirect determination of the dissolved zinc ions by anodic stripping voltammetry (ASV) at a mercury film glassy carbon electrode (GCE). The proposed method couples the high sensitivity of anodic stripping analysis for zinc ions with effective magnetic separation for eliminating nonspecific adsorption effects and offers great promise for DNA hybridization analysis.