Photochromic organic-inorganic hybrid materials

Photochromic organic-inorganic hybrid materials have attracted considerable attention owing to their potential application in photoactive devices, such as optical memories, windows, photochromic decorations, optical switches, filters or non-linear optics materials. The growing interest in this field has largely expanded the use of photochromic materials for the purpose of improving existing materials and exploring new photochromic hybrid systems. This tutorial review summarizes the design and preparation of photochromic hybrid materials, and particularly those based on the incorporation of organic molecules in organic-inorganic matrices by the sol-gel method. This is the most commonly used method for the preparation of these materials as it allows vitreous hybrid materials to be obtained at low temperatures, and controls the interaction between the organic molecule and its embedding matrix, and hence allows tailoring of the performance of the resulting devices.     

Photostability of a photochromic naphthopyran dye in different sol-gel prepared ormosil coatings

A photochromic naphthopyran derivative was embedded in sol-gel prepared thin ormosil films. The resulting samples show high transparency and exhibit a strong red colouration upon irradiation with UV light. The photostability of the photochromic molecules is strongly related to the nature of the embedding ormosil matrix. The introduction of organic functional groups into the inner pore surface of the matrix allows tailoring the chemical environment where the dye molecules will be allocated, in terms of the effectiveness of the interaction between the photochromic molecules and the Si-OH groups on the surface of the pores, affecting the stability of the molecules upon prolonged exposition to UV light. The photostability of the molecules was increased in matrices functionalized with larger organic groups, or with larger amount of modifying groups. In this way the photodegradation of the photochromic molecules could be reduced by a factor of 5, as compared with the photodegradation of the molecules in unfunctionalized silica matrix.     

镶嵌钨硅酸的新型有机-无机纳米复合薄膜的制备及光致变色性能研究

将超分子自组装技术与Sol-gel过程相结合,制备了镶嵌Keggin结构钨硅酸的MAAM/VTEOS/TEOS纳米复合薄膜,并采用IR,XRD和TG-DSC等方法对薄膜进行了结构表征.在复合薄膜光照变蓝后,通过UV-Vis和ESR光谱对薄膜的光致变色性能及其机理进行了研究.结果表明,钨硅酸在复合网络中仍保持Keggin结构,与有机-无机复合基体中的-NH₂通过氢键发生强烈的相互作用,经紫外光照后发生电荷转移,[SiW₁₂O₄0]₄^-被还原为[SiW₁₂O₄0]₅^-,同时产生氨基自由基.褪色过程则与氧气存在与否有关,实验结果表明,该薄膜具有良好的光致变色性能,对光有较快的响应恢复速度和良好的可逆重复性.     

Thin film photochromic materials: Effect of the sol-gel ormosil matrix on the photochromic properties of naphthopyrans

Photochromic naphthopyran derivatives have been embedded in sol-gel prepared organically modified thin films. The introduction of organic functional groups into a silica matrix allows tailoring the surface of its pores and the polarity of the environment of the embedded host molecules. The photochromic properties of the naphthopyran molecules, such as the spectral properties of the coloured forms and the kinetics of the thermal bleaching, depend strongly on the polarity of the pores where the molecules are located and, hence, on the nature and loading of organic functional groups in the composition of the ormosil matrix. Important changes in the photochromic properties of the films have also been induced by modifications in the sol-gel preparation and processing parameters. The photostability of the photochromic molecules upon prolonged exposition to UV light is strongly related to the nature of the embedding ormosil matrix. The introduction of organic functional groups into the inner pore surface of the matrix, where the dye molecules will be located, affects the stability of the molecules, in terms of the effectiveness of the interaction between the photochromic molecules and the pore surface.     

多功能二噻吩乙烯光致变色光分子开关材料

光致变色材料是一类在不同波长的光交替照射下,产生两种可进行可逆转换的光致异构体并伴随明显的光物理和光化学性能变化的材料。基于其特殊的光致异构性质,人们已开发出多种光致变色功能材料并将其广泛应用于超高密度光信息存储、分子开关、分子逻辑门、分子导线、光电材料、多光子器件、表面/纳米器件、液晶材料、化学传感、生物成像、自组装、聚集诱导发光、光控生物体系等诸多领域。其中,二噻吩乙烯类化合物因其出色的热稳定性、优良的耐疲劳性、快的响应速率、高的转化率和量子产率以及出色的固相反应活性而成为理想的光致变色材料之一。本文主要围绕近期本研究组研究成果着重介绍近几年二噻吩乙烯类化合物从溶液体系到功能化表面体系的研究进展,探讨当前该领域存在的问题并对其前景和发展方向进行展望。     

Development of Photochromic Coatings on Polycarbonate

New photochromic materials based on heteropolyoxometallates (HPOM) incorporated into a hybrid organic-inorganic binder were prepared and coated onto polycarbonate (PC) substrates. The hybrid binder was formed through the controlled hydrolysis and condensation of 3-glycidoxypropyl-trimethoxysilane (GPTMS) and bisphenol A (BPA) by the sol–gel technique. The photochromic behavior of the materials was investigated by using ultraviolet-visible (UV-Vis) absorption spectroscopy and color index values. The results indicated that the films were reduced photochemically to yield a blue species under UV irradiation, with the film color changing to deep blue with increasing time, and HPOM and BPA content. The photosensitivity of several films with molybdenum HPOM showed faster coloration and much slower bleaching than the tungsten HPOM. A photochromic mechanism involving electron transfer between the GPTMS matrix with BPA, and PWO is proposed. After UV irradiation, the O–H and bonds decomposed gradually and W^{6 +} was reduced gradually with increasing time. The photochromic coatings on PC substrate showed reversible transmittance change before and after UV irradiation, making then efficient light protectors under UV irradiation.     

Syntheses and fully diastereospecific photochromic reactions of thiophenophan-1-enes with chiral bridges

Thiophenophan-1-enes with chiral polyether bridges were prepared and their diastereospecific photochromic reactions were studied. The coupling reaction of substituted dithienylethenes and various chiral synthons afforded thiophenophan-1-enes, namely, bridged dithienylethenes, as single enantiomers without optical resolution, thus indicating that these reactions occurred diastereoselectively. Upon UV irradiation, each optically active thiophenophan-1-ene isomerized to the corresponding enantiomer of the closed form and returned to the initial enantiomer of the open form upon visible irradiation. Because thiophenophan-1-enes never isomerized to other diastereomers even at a high temperature, they underwent diastereospecific photochromic reactions. Large changes were observed in the measurement of the optical rotations of the solutions of thiophenophan-1-enes at 588?nm according to their photochromic reactions. As there was no absorption at this wavelength for both isomers of each thiophenophan-1-enes, the nondestructive readout of the photochromic reaction could be carried out by using these chiral thiophenophan-1-enes.     

Synthesis and photoresponsive behavior of azobenzene-functionalized polythiophene films

In this paper, two kinds of azobenzene-functionalized polythiophene liquid-crystalline (LC) polymers with different spacer lengths (n = 6 and 11) were synthesized. The photochromic behaviors and photoresponsive property of these polymer films were investigated by means of spectrofluorophotometer, polarized optical microscope and ARC UV lamp. The results have shown that these liquid-crystalline polythiophene films exhibit a quite fast photochemical phase transition speed and a better opticalswitching property. Furthermore, the existence of the azobenzene moiety in the side chain has also rendered the polythiophene some interesting optical properties that can be modulated by UV light irradiation, e.g., the intensity of photoluminescent emission associated with the conjugated polythiophene main chain was found to decrease upon UV irradiation and the effect becomes more prominent when shorter spacers are used in between the azobenzene group and the main chain.     

Syntheses and Fully Diastereospecific Photochromic Reactions of Thiophenophan‐1‐enes with Chiral Bridges

Thiophenophan‐1‐enes with chiral polyether bridges were prepared and their diastereospecific photochromic reactions were studied. The coupling reaction of substituted dithienylethenes and various chiral synthons afforded thiophenophan‐1‐enes, namely, bridged dithienylethenes, as single enantiomers without optical resolution, thus indicating that these reactions occurred diastereoselectively. Upon UV irradiation, each optically active thiophenophan‐1‐ene isomerized to the corresponding enantiomer of the closed form and returned to the initial enantiomer of the open form upon visible irradiation. Because thiophenophan‐1‐enes never isomerized to other diastereomers even at a high temperature, they underwent diastereospecific photochromic reactions. Large changes were observed in the measurement of the optical rotations of the solutions of thiophenophan‐1‐enes at 588 nm according to their photochromic reactions. As there was no absorption at this wavelength for both isomers of each thiophenophan‐1‐enes, the nondestructive readout of the photochromic reaction could be carried out by using these chiral thiophenophan‐1‐enes.     

Stable photochromism and controllable reduction properties of surfactant-encapsulated polyoxometalate/silica hybrid films

In this paper, we present a novel strategy for fabricating polyoxometalate (POM)-based photochromic silica hybrid films. To combine metal nanoparticles (NPs) into the POMs embedded silica matrix, furthermore, we realized the controllable in situ synthesis of metal NPs in the film by utilizing the reduction property of POMs existing in the reduced state. Through electrostatic encapsulation with hydroxyl-terminated surfactants, the POMs with good redox property can be covalently grafted onto a silica matrix by means of a sol-gel approach, and stable silica sol-gel thin films containing surfactant-encapsulated POMs can be obtained. The functional hybrid film exhibits both the transparent and easily processible properties of silica matrix and the stable and reversible photochromism of POMs. In addition, well-dispersed POMs in a hydrophobic microenvironment within the hybrid film can be used as reductants for the in situ synthesis of metal NPs. More significantly, the size and location of NPs can be tuned by controlling the adsorption time of metal ions and mask blocking the surface. The hybrid film containing both POMs and metal NPs with patterned morphology can be obtained, which has potential applications in optical display, memory, catalysis, microelectronic devices and antibacterial materials.     

Multicolor photochromism of two- and three-component diarylethene crystals

Novel photochromic single crystals composed of three different kinds of diarylethenes, 1,2-bis(3,5-dimethyl-2-thienyl)perfluorocyclopentene (1a), 1,2-bis(2,5-dimethyl-3-thienyl)perfluorocyclopentene (2a), and 1,2-bis(2-methyl-5-p-methoxyphenyl-3-thienyl)perfluorocyclopentene (3a), have been prepared. The three-component crystals turned yellow, orange, red, purple, blue, green, or black upon irradiation with light of appropriate wavelengths. The colors of the crystals were thermally stable in the dark and completely bleached by irradiation with visible light. Such multicolored photochromic crystals have potential for the application to optoelectronic devices, such as multifrequency three-dimensional optical memory media or full-color displays.     

Flexible ureasil hybrids with tailored optical properties through doping with metal nanoparticles

Hybrid organic-inorganic nanocomposites containing uniform distributions of metal nanoparticles have been prepared by mixing a preformed nanoparticle colloid with the precursors of a ureasil, prior to the sol-gel transition. These nanocomposites possess not only high optical quality and optical features dictated by the size and shape of the nanoparticle dopants but also a high degree of flexibility, which can largely enhance the range of applications in practical devices. The deposition of a uniform silica shell on the nanoparticle surface prior to the sol-gel transition was found to be required to maintain the colloidal stability during the process and, thus, to retain the optical properties in the final nanocomposite material. This method can be readily extended to other materials, such as semiconductor and magnetic nanoparticles.     

Azobenzene-containing bent-core liquid crystals: an overview

ABSTRACT

Azo-functionalised materials are of special interest due to their photochromic nature, i.e. reversible trans–cis isomerisation upon photoirradiation. The combination of photosensitivity and liquid crystalline properties in the same molecule allows the material to be exploited for optical and optoelectronic devices. Azobenzene-based bent-core liquid crystals (BCLCs) have attracted considerable attention in recent years due to their rich mesomorphism. In this review, the main research directions and different molecular structures of bent-core molecules incorporating azobenzene unit and its subtype the so-called hockey-stick molecules are summarised. Additionally, azobenzene-based U-shaped molecules, hydrogen-bonded bent-shaped liquid crystalline materials and some selected examples of two different types of photoswitchable mesogenic dimers are provided. The nature, number and position of the lateral substitutions able to modify the phase behaviour of such BCLCs, affording in turn interesting liquid crystalline phases are discussed. Finally, the isomerisation process of these photosensitive BCLCs in solutions or in mesophases under the effect of UV–visible irradiation is summarised.     

Stability against photodegradation of a photochromic spirooxazine dye embedded in amino-functionalized sol–gel hybrid coatings

A photochromic spirooxazine derivative, 1-propyl-3,3,5,6-tetramethyl-spiro[indoline-2-3??-[quinolino]oxazine], was successfully embedded in sol?Cgel thin silica films functionalized with different amino groups. The resulting films show high transparency and exhibit a strong blue coloration upon irradiation with UV light. The composition of the embedding matrix has an important effect on the photostability of the photochromic molecules upon exposure to sunlight, and can therefore be used to design coatings in which the dye molecules have improved durability. In this sense, the incorporation of different amino groups (?CPrNH₂, ?CPrNMe₂ and ?CPhNH₂) in the ormosil network, results in an enhanced stabilization of the photochromic dye, as compared with unfunctionalized matrices. In matrices modified with aminophenyl groups (?CPhNH₂), the photostability of the dye has been increased, reaching a factor of 8, due to the formation of hydrogen bonds between the amino groups and the OH groups of the pore surface, limiting the availability of these groups to undergo side reactions with the dye during irradiation that lead to its degradation. Increasing the photostability of the photochromic dye is an important issue for the long term usage of photochromic materials in outdoors applications, limited, nowadays, by their low durability when exposed to sunlight.     

Photochromism of dihydroindolizines. Part 16: Tuning of the photophysical behavior of photochromic dihydroindolizines in solution and in polymeric thin film

In this work, photochromic materials based on the dihydroindolizine (DHI) system were synthesized in multistep reactions using chemical and photochemical methods. Some of the synthesized photochromic dihydroindolizine derivatives were substituted on the fluorene (region A) and pyridazine (region C) moieties in order to provide the appropriate functionality for optimal tuning of the photochromic properties of the system. Irradiation of the photochromic DHIs with polychromatic light led to ring opened colored betaines, which underwent thermal 1,5-electrocyclization. The red to green colored betaines produced after UV irradiation returned back through 1,5-electrocyclization to the corresponding DHIs with different rate constants depending on the substituents in both fluorene and pyridazine regions. The kinetic measurements of the thermal 1,5-electrocyclization under different temperatures that ranged from −10 to 25 °C showed that the half-lives of the colored betaines fall in the second to hours domain. Interestingly, these materials showed a very good photochromic behavior not only in solution but also in the PMMA matrix. Irradiation of a slide prepared by the deep-coating method led to the formation of the colored betaine and the kinetics of the thermally reversible 1,5-electrocyclization and the AFM image of the film has been recorded. Indeed, the chemical and thermal stability of the investigated betaines in polymer (PMMA) will render such species useful for a plethora of new of applications.     

含氯化铜的紫精/聚合物薄膜制备及光致变色性能研究

将氯化铜加入到紫精/聚乙烯吡咯烷酮中,制得了一种可快速褪色、光疲劳性能优异的紫精/聚合物光致变色薄膜,测试了该薄膜的变色性能、褪色性能及光疲劳性能.结果表明,氯化铜的加入使薄膜初次紫外光照时的颜色变浅,但加快了薄膜褪色;当氯化铜与紫精摩尔比为1:1、60℃褪色时,薄膜光照后在610 nm处吸光度的半衰期为9 min,而不合氯化铜的薄膜为54 min,氯化铜含量越高,半衰期越短.含有氯化铜的薄膜,随变色/褪色循环次数增加,光照后的显色加深,氯化铜含量越高,颜色增加的程度越大.该功能薄膜可用于信息存储、太阳镜及智能窗等方面.     

Preparation and properties of photochromic bacterial cellulose nanofibrous membranes

The photochromic bacterial cellulose (BC) nanofibrous membranes containing 1′,3′,3′-trimethyl-6-nitrospiro(2H-1-benzopyran-2,2′-indoline) (NO₂SP) were successfully prepared by surface modification of BC nanofibers with spiropyran photochromes, and their physical and photochromic properties were characterized. The FTIR spectra indicated the interaction between BC and NO₂SP which leads to the uniform dispersion of NO₂SP in the nanofibrous membrane. SEM results demonstrated that the introduction of NO₂SP maintains the nanofibrous network structure of BC. UV/vis spectrometry of the resulting BC-NO₂SP revealed that the membranes show reversible photochromic property by changing their color from colorless to pink forming a merocyanine structure upon UV irradiation, and returning back again to colorless spiropyran structure by visible light. The contact angle of the BC-NO₂SP with water was found to be reversibly regulated due to the reversible isomerization of the spiropyran moieties in BC-NO₂SP. The result indicates that the surface modification with spiropyran photochromes expands new applications of BC nanofibers and such photochromic nanofibers with excellent photosensitivity have great potentials for sensitive displays, biosensors and other optical devices.     

Photochromic metal complexes: photoregulation of both the nonlinear optical and luminescent properties

A series of dithienylethene (DTE)-containing 2,2'-bipyridine ligands and their zinc(II) diacetate, zinc(II) dichloro, rhenium(I) tricarbonyl bromo, and ruthenium(II) bis(bipyridine) complexes have been designed and synthesized, and their photochromic, photophysical, and quadratic nonlinear optical properties have been studied. Upon UV irradiation at 350 nm, the ligands and complexes undergo ring closure of the DTE units, with a good to excellent photocyclization yield. In the case of the Re(I) and Ru(II) complexes, the photocyclization of the DTE units can also be triggered using visible light, upon excitation into the metal-to-ligand charge-transfer (MLCT) bands at 400 and 490 nm, respectively. Molecular quadratic nonlinear optical (NLO) responses of the complexes have been determined by using either the electrical field induced second harmonic generation (EFISH) or harmonic light scattering (HLS) technique at 1910 nm. These studies reveal a large increase of the second-order NLO activity after UV irradiation and subsequent formation of the ring-closed isomers. This efficient enhancement clearly reflects the delocalization of the π-electron system and the formation of strong push-pull chromophores in the closed forms. The combination of the photochromic DTE-based bipyridine ligand with luminescent Re(I) and Ru(II) fragments also allows the photoregulation of the emission, leading to an efficient quenching of the ligand-based 77 K luminescence and demonstrating that the photocontrol of two optical properties, linear and nonlinear, could be achieved by using the same photochromic ligand.     

Polyoxometalate cured epoxy resins with photochromic properties

Novel photochromic thermosetting materials were facilely prepared by polyoxometalate, Keggin-type H₃PW₁₂O₄₀, cured epoxy networks with ethylene oxide blocks. The dual functions of polyoxometalate as both hardener and photochromophore were studied by differential scanning calorimetry, infrared spectroscopy, ultraviolet–visible spectroscopy (UV–vis), and generalized two-dimensional correlation analysis. Polyoxometalate initiates the cationic polymerization of epoxy resin through dissolving in either polyethylene oxide epoxy or organic solvents. When subjected to UV irradiation, the transparent thermosetting materials with ethylene oxide blocks change from colorless to blue, and could be bleached in air at various temperatures to recover its initial state. From the UV–vis measurements, all the resultant thermosetting materials demonstrated similar photochromic behavior after ultraviolet irradiation showing characteristic d–d transition band and intervalence charge transfer band. The 2D correlation analysis of the photochromic spectra clearly revealed the sequence of electron movements in the framework of PW₁₂ anion.     

Cholesteric mixture containing chiral‐photochromic and diarylethene dopants as novel material with dual photochromism

New cholesteric polymeric mixture containing nematic side‐chain homopolymer, 2 wt% of photochromic diarylethene dopant and 5 wt% of chiral‐photochromic dopant based on cinnamic acid and isosorbide was prepared. Upon UV irradiation of planarly‐oriented mixture films at room temperature, a transformation of open colorless form of diarylethene dopant into a closed colored form takes place, which is followed by the appearance of an intense absorption maximum in the visible spectral region and decreasing selective light reflection intensity. This process is photo‐ and thermo‐reversible and many cycles ‘recording‐erasing’ can be realized. UV irradiation and subsequent annealing of the films lead to untwisting of the cholesteric helix and cause an irreversible shift of selective light reflection to the long‐wavelength region. This process is explained by the E‐Z isomerization of chiral photochromic groups of the dopant relative to a C?C bond accompanied by a decrease in their twisting ability. It has been shown, that the use of the material prepared in this work provides an opportunity to record two images at the same time: one image is due to a change in the helical pitch and another (second) image is due to the photochromism of diarylethene dopant. It is pertinent to note that using the approach developed in this work allows one to widely vary the range of materials exhibiting dual photochromism. It was demonstrated that the mixture under study shows advantage as new photosensitive material for optics, optoelectronics and data recording. Copyright © 2002 John Wiley & Sons, Ltd.