Effects of pulse strength and pulse duration on in vitro DNA electromobility

Interstitial transport of DNA is a rate-limiting step in electric field-mediated gene delivery in vivo. Interstitial transport of macromolecules, such as plasmid DNA, over a distance of several cell layers, is inefficient due to small diffusion coefficient and inadequate convection. Therefore, we explored electric field as a novel driving force for interstitial transport of plasmid DNA. In this study, agarose gels were used to mimic the interstitium in tissues as they had been well characterized and could be prepared reproducibly. We measured the electrophoretic movements of fluorescently labeled plasmid DNA in agarose gels with three different concentrations (1.0%, 2.0% and 3.0%) subjected to electric pulses at three different field strengths (100, 200 and 400 V/cm) and four different pulse durations (10, 50, 75, 99 ms). We observed that: (1) shorter pulses (10 ms) were not as efficient as longer pulses in facilitating plasmid transport through agarose gels; (2) plasmid electromobility reached a plateau at longer pulse durations; and (3) plasmid electromobility increased with applied electric energy, up to a threshold, in all three gels. These data suggested that both pulse strength and duration needed to be adequately high for efficient plasmid transport through extracellular matrix. We also found that electric field was better than concentration gradient of DNA as a driving force for interstitial transport of plasmid DNA.     

Effectiveness of tumor electrochemotherapy as a function of electric pulse strength and duration

The aim of this study was to evaluate the effectiveness of electrochemotherapy (ECT) as a function of various combinations of pulse strength and duration. C57Bl mice bearing LLC tumors were injected i.p. with bleomycin (BLM) at doses 5 mg/kg in 0.2 ml of physiological saline. Thirty minutes later, tumors were positioned between plate electrodes and were pulsed with eight-square wave electric pulses with an individual pulse strength of 900, 1100, 1300 or 1500 V/cm and duration of 0.1, 0.25, 0.5 or 1 ms. Effectiveness of ECT was estimated by measuring inhibition of tumor growth and by estimating extent of necrosis in histological slices of the treated tumors. At pulse strength of 900 V/cm and duration of 0.1 ms, electrochemotherapy was ineffective. Noticeable inhibition of tumor growth (threshold of ECT) was obtained when pulse duration at this field strength was increased up to 0.25 ms. Further increase of pulse strength and/or duration resulted in progressive enhancement of antitumor effects. Using tumor doubling time (DT) as a criteria, we showed that the same efficacy of ECT could be achieved using various pairs of values for pulse strength and duration. Largest antitumor efficacy of ECT was obtained at pulse strength of 1500 V/cm and duration of 1 ms. These pulse conditions applied alone neither significantly suppressed tumor growth nor induced noticeable side effects of the surrounding tissues. The results of this study thus suggest that the effectiveness of electrochemotherapy can be enhanced (in comparison to widely accepted conditions of electrochemotherapy--8 pulses of 1300 V/cm, 0.1 ms) if 1500-V/cm, 1-ms electric pulses are used. Our study also implicates that other pulse conditions could be found for this enhanced ECT.     

A single molecule detection method for understanding mechanisms of electric field-mediated interstitial transport of genes

The interstitial space is a rate limiting physiological barrier to non-viral gene delivery. External pulsed electric fields have been proposed to increase DNA transport in the interstitium, thereby improving non-viral gene delivery. In order to characterize and improve the interstitial transport, we developed a reproducible single molecule detection method to observe the electromobility of DNA in a range of pulsed, high field strength electric fields typically used during electric field-mediated gene delivery. Using agarose gel as an interstitium phantom, we investigated the dependence of DNA electromobility on field magnitude, pulse duration, pulse interval, and pore size in the interstitial space. We observed that the characteristic electromobility behavior, exhibited under most pulsing conditions, consisted of three distinct phases: stretching, reptation, and relaxation. Electromobility depended strongly on the field magnitude, pulse duration, and pulse interval of the applied pulse sequences, as well as the pore size of the fibrous matrix through which the DNA migrated. Our data also suggest the existence of a minimum pulse amplitude required to initiate electrophoretic transport. These results are useful for understanding the mechanisms of DNA electromobility and improving interstitial transport of genes during electric field-mediated gene delivery.     

Theoretical analysis of localized heating in human skin subjected to high voltage pulses

Electroporation, the increase in the permeability of bilayer lipid membranes by the application of high voltage pulses, has the potential to serve as a mechanism for transdermal drug delivery. However, the associated current flow through the skin will increase the skin temperature and might affect nearby epidermal cells, lipid structure or even transported therapeutic molecules. Here, thermal conduction and thermal convection models are used to provide upper and lower bounds on the local temperature rise, as well as the thermal damage, during electroporation from exponential voltage pulses (70 V maximum) with a 1 ms and a 10 ms pulse time constant. The peak temperature rise predicted by the conduction model ranges from 19 degrees C for a 1 ms time constant pulse to 70 degrees C for the 10 ms time constant pulse. The convection (mass transport) model predicts a 18 degrees C peak rise for 1 ms time constant pulses and a 51 degrees C peak rise for a 10 ms time constant pulse. The convection model compares more favorably with previous experimental studies and companion observations of the local temperature rise during electroporation. Therefore, it is expected that skin electroporation can be employed at a level which is able to transport molecules transdermally without causing significant thermal damage to the tissue.     

Real time electroporation control for accurate and safe in vivo non-viral gene therapy

In vivo cell electroporation is the basis of DNA electrotransfer, an efficient method for non-viral gene therapy using naked DNA. The electric pulses have two roles, to permeabilize the target cell plasma membrane and to transport the DNA towards or across the permeabilized membrane by electrophoresis. For efficient electrotransfer, reversible undamaging target cell permeabilization is mandatory. We report the possibility to monitor in vivo cell electroporation during pulse delivery, and to adjust the electric field strength on real time, within a few microseconds after the beginning of the pulse, to ensure efficacy and safety of the procedure. A control algorithm was elaborated, implemented in a prototype device and tested in luciferase gene electrotransfer to mice muscles. Controlled pulses resulted in protection of the tissue and high levels of luciferase in gene transfer experiments where uncorrected excessive applied voltages lead to intense muscle damage and consecutive loss of luciferase gene expression.     

Influence of the physiological state on the electric field mediated transformation efficiency of intact mycobacterial cells

The sensitivity of Mycobacterium fortuitum at various growth stages to electric field pulses has been investigated in order to transform the cells by electroporation. In contrast to older cells, early- and mid-exponential growing cells are very field sensitive and, simultaneously, transformable to a relatively high degree. At an electric field strength E = 7 kV/cm and a pulse duration τ ≈ 13 ms (one pulse) an optimum transformation rate of about 2 × 10⁴ transformants/μg DNA was observed. On the basis of the different fast change of transformation rate and field sensitivity during cell growth we suppose a remarkable influence of biochemical changes in the cell wall composition on the efficiency of the electric field mediated transformation.     

The temperature effect during pulse application on cell membrane fluidity and permeabilization

Cell membrane permeabilization is caused by the application of high intensity electric pulses of short duration. The extent of cell membrane permeabilization depends on electric pulse parameters, characteristics of the electropermeabilization media and properties of cells exposed to electric pulses. In the present study, the temperature effect during pulse application on cell membrane fluidity and permeabilization was determined in two different cell lines: V-79 and B16F-1. While cell membrane fluidity was determined by electron paramagnetic resonance (EPR) method, the cell membrane electropermeabilization was determined by uptake of bleomycin and clonogenic assay. A train of eight rectangular pulses with the amplitude of 500 V/cm, 700 V/cm and 900 V/cm in the duration of 100 micros and with repetition frequency 1 Hz was applied. Immediately after the pulse application, 50 microl droplet of cell suspension was maintained at room temperature in order to allow cell membrane resealing. The cells were then plated for clonogenic assay. The main finding of this study is that the chilling of cell suspension from physiological temperature (of 37 degrees C) to 4 degrees C has significant effect on cell membrane electropermeabilization, leading to lower percent of cell membrane permeabilization. The differences are most pronounced when cells are exposed to electric pulse amplitude of 900 V/cm. At the same time with the decreasing of temperature, the cell membranes become less fluid, with higher order parameters in all three types of domains and higher proportion of domain with highest order parameter. Our results indicate that cell membrane fluidity and domain structure influence the electropermeabilization of cells, however it seems that some other factors may have contributing role.     

Evaluation of cytotoxic effect of photodynamic therapy in combination with electroporation in vitro

Under the influence of electric pulses cells undergo membrane electroporation (EP), which results in increased permeability of the membrane to exogenous compounds. EP is applied in oncology as a method to enhance delivery of anticancer drugs. For that reason it was essential to combine photodynamic tumor therapy (PDT)--the cancer treatment method based on the use of photosensitizers that localize selectively in malignant tumors and become cytotoxic when exposed to light, and EP, with the aim to enhance the delivery of photosensitizers into the tumor and therefore to increase the efficacy of PDT. Thus, the aim of study was to evaluate the cytotoxic effect of PDT in combination with EP. A Chinese hamster lung fibroblast cell line (DC-3F) was used. The cells were affected by photosensitizers chlorin e(6) (C e(6)) at the dose of 10 mug/ml and aluminium phthalocyanine tetrasulfonate (AlPcS4) at the dose of 50 microg/ml. Immediately after adding of photosensitizers the cells were electroporated with 8 electric pulses at 1200 V/cm intensity, 0.1 ms duration, 1 Hz frequency. Then, after 20 min of incubation the cells were irradiated using a light source--a visible light passing through a filter (KC 14, emitted light from 660 nm). The fluence rate at the level of the cells was 3 mW/m(2). Cytotoxic effect on cells viability was evaluated using MTT assay. Our in vitro data showed that the cytotoxicity of PDT in combination with EP increases fourfold on the average. Based on the results we suggest that EP could enhance the effect of PDT.     

Electrotransformation of Saccharomyces cerevisiae protoplast by a plasmid of Escherichia coli

The experiments reported here are aimed at obtaining optimum conditions for gene transformation after electric field pulses. Saccharomyces cerevisiae DBY746 is used as the recipient strain for shuttle plasmid (YRp group). From the relationship between the optimum electric field conditions and the transformation efficiency it is discovered that the maximum transformation efficiency appears at a wide pulse length of 400 μs with an electric field strength of 4 kV/cm, yielding up to 273 transformants/μg DNA. The electroporation unit used in the experiment is a home-made set featuring simplicity, readiness and practicality.     

Multiple-pulse-mediated electrofusion of intact erythrocyte onto human term placental amnion.

The creation of surface modified human term placental amnion by electrofusing human cells onto its surface has been thought of. A multiple-pulse electrofusion protocol with 10 square pulses of 10-micros pulse length, and electric field of 0.2 kV cm(-1), can make erythrocyte-amnion tissue electrofusion possible. The protocol devised merge the cell-tissue-adherence steps with fusogenic pulse. The finding opens up a new avenue of cell electrofusion onto human tissue with minimal procedural complexities.     

Electrically enhanced percutaneous delivery of delta-aminolevulinic acid using electric pulses and a DC potential

Selectivity of photodynamic therapy can be improved with localized photosensitizer delivery, but topical administration is restricted by poor diffusion across the stratum corneum. We used electric pulses to increase transdermal transport of delta-aminolevulinic acid (ALA), a precursor to the photosensitizer protoporphyrin IX (PpIX). ALA-filled electrodes were attached to the surface of excised porcine skin or the dorsal surface of mice. Pulses were administered and, in some in vivo cases, a continuous DC potential (6 V) was concomitantly applied. For in vitro 14C ALA penetration, 10 microm layers parallel to the stratum corneum were assayed by liquid scintillation analysis, and 10 microm cross sections were examined autoradiographically. As the electrical dose (voltage x frequency x pulse width x treatment duration) increased, there was an increase in penetration depth. In vivo delivery was assayed by measuring the fluorescence of PpIX in skin samples. A greater than two-fold enhancement of PpIX production with electroporative delivery was seen versus that obtained with passive delivery. Superimposition of a DC potential resulted in a nearly three-fold enhancement of PpIX production versus passive delivery. Levels were higher than the sum of PpIX detected after pulse-alone and DC-alone delivery. Electroporation and electrophoresis are likely factors in electrically enhanced delivery.     

Combined therapy of the antimetastatic compound NAMI-A and electroporation on B16F1 tumour cells in vitro

Ruthenium complex NAMI-A [ImH][trans-RuCl(4)(DMSO-S)Im] (Im = imidazole) is a potential chemotherapeutic drug in cancer treatment. Electroporation can be used to facilitate delivery of NAMI-A into cells. Suspension of B16F1 tumour cells from mouse melanoma in NAMI-A solution was exposed to a train of electric pulses. The effect of NAMI-A was determined by examining cell viability in clonogenic test. Our results show that electroporation increases the otherwise scarce in vitro effects of NAMI-A, i.e. reduces cell viability. At the conditions chosen for experiments 90% of cells survived in the presence of 1 microM NAMI-A, whereas in a combined treatment with 1 microM NAMI-A and electroporation only about 10% of cells survived.     

Pulse Duration Dependent Asymmetry in Molecular Transmembrane Transport Due to Electroporation in H9c2 Rat Cardiac Myoblast Cells In Vitro

Electroporation (EP) is one of the successful physical methods for intracellular drug delivery, which temporarily permeabilizes plasma membrane by exposing cells to electric pulses. Orientation of cells in electric field is important for electroporation and, consequently, for transport of molecules through permeabilized plasma membrane. Uptake of molecules after electroporation are the greatest at poles of cells facing electrodes and is often asymmetrical. However, asymmetry reported was inconsistent and inconclusive—in different reports it was either preferentially anodal or cathodal. We investigated the asymmetry of polar uptake of calcium ions after electroporation with electric pulses of different durations, as the orientation of elongated cells affects electroporation to a different extent when using electric pulses of different durations in the range of 100 ns to 100 µs. The results show that with 1, 10, and 100 µs pulses, the uptake of calcium ions is greater at the pole closer to the cathode than at the pole closer to the anode. With shorter 100 ns pulses, the asymmetry is not observed. A different extent of electroporation at different parts of elongated cells, such as muscle or cardiac cells, may have an impact on electroporation-based treatments such as drug delivery, pulse-field ablation, and gene electrotransfection.     

Electron correlation effects on the femtosecond dephasing dynamics of E22 excitons in (6,5) carbon nanotubes

Highly nonlinear pump fluence dependence was observed in the ultrafast one-color pump-probe responses excited by 38 fs pulses resonant with the E(22) transition in a room-temperature solution of (6,5) carbon nanotubes. The differential probe transmission (ΔT/T) at the peak of the pump-probe response (τ = 20 fs) was measured for pump fluences from ～10(13) to 10(17) photons/pulse cm(2). The onset of saturation is observed at ～2 × 10(15) photons/pulse cm(2) (～8 × 10(5) excitons/cm). At pump fluences >4 × 10(16) photons/pulse cm(2) (～1.6 × 10(6) excitons/cm), ΔT/T decreases as the pump fluence increases. Analogous signal saturation behavior was observed for all measured probe delays. Despite the high exciton density at saturation, no change in the E(22) population decay rate was observed at short times (<300 fs). The pump probe signal was modeled by a third-order perturbation theory treatment that includes the effects of inhomogeneous broadening. The observed ΔT/T signal is well-fit by a pump-fluence-dependent dephasing rate linearly dependent on the number of excitons created by the pump pulse. Therefore, the observed nonlinear pump intensity dependence is attributed to the effects of quasi-elastic exciton-exciton interactions on the dephasing rates of single carbon nanotubes. The low fluence total dephasing time is 36 fs, corresponding to a homogeneous width of 36 meV (290 cm(-1)), and the derived E(22) inhomogeneous width is 68 meV (545 cm(-1)). These results are contrasted with photon-echo-derived parameters for the E(11) transition.     

On the role of intermembrane contact in cell electrofusion

The question: is cell electrofusion mediated by a long-lived fusogenic state or does the electric field fuse the membranes directly, was investigated by a new centrifugal approach. Mouse L-cells were brought into contact by a special centrifuge device allowing high voltage pulses to be applied upon the cell pellet during centrifugation. Both stages, membrane contact and electrical breakdown of cell membranes, were controlled. The degree of cell-to-cell compression and corresponding intermembrane contact area were estimated by measuring the low-voltage resistance R of the cell pellet which grows sharply with the increase of centripetal acceleration G. The extent of electrical membrane poration and critical pulse parameters were detected by recording the breakdown current. Supercritical pulse delivery to a cell pellet compressed by intensive centrifugation (400–600 g) leads to polycaryon mass formation. The pulse amplitude required for efficient fusion (2–3 kV/cm, 20–50 μs: fusion index F ∼ 25–35%) was found to be several times higher than the amplitude sufficient to induce noticeable breakdown (300 V/cm). The shapes of the F(G) and R(G) dependences were similar, which revealed a correlation between the area of intermembrane contact and fusion probability. Fusion was negligible if the moment of pulsation and the period of intensive centrifugation were separated in time. The data obtained allow us to conclude that in the case of fusion of L-cells the action of the electric field is not mediated by any long-lived fusogenic state. The process of the common membrane surface formation driven directly by the electric field is discussed.     

Oxidative Effects during Irreversible Electroporation of Melanoma Cells—In Vitro Study

Irreversible electroporation (IRE) is today used as an alternative to surgery for the excision of cancer lesions. This study aimed to investigate the oxidative and cytotoxic effects the cells undergo during irreversible electroporation using IRE protocols. To do so, we used IRE-inducing pulsed electric fields (PEFs) (eight pulses of 0.1 ms duration and 2–4 kV/cm intensity) and compared their effects to those of PEFs of intensities below the electroporation threshold (eight pulses, 0.1 ms, 0.2–0.4 kV/cm) and the PEFs involving elongated pulses (eight pulses, 10 ms, 0.2–0.4 kV/cm). Next, to follow the morphology of the melanoma cell membranes after treatment with the PEFs, we analyzed the permeability and integrity of their membranes and analyzed the radical oxygen species (ROS) bursts and the membrane lipids’ oxidation. Our data showed that IRE-induced high cytotoxic effect is associated both with irreversible cell membrane disruption and ROS-associated oxidation, which is occurrent also in the low electric field range. It was shown that the viability of melanoma cells characterized by similar ROS content and lipid membrane oxidation after PEF treatment depends on the integrity of the membrane system. Namely, when the effects of the PEF on the membrane are reversible, aside from the high level of ROS and membrane oxidation, the cell does not undergo cell death.     

The effect of high frequency electric pulses on muscle contractions and antitumor efficiency in vivo for a potential use in clinical electrochemotherapy

Muscle contractions present the main source of unpleasant sensations for patients undergoing electrochemotherapy. The contractions are a consequence of high voltage pulse delivery. Relatively low repetition frequency of these pulses (1 Hz) results in separate muscle contractions associated with each single pulse that is delivered. It would be possible to reduce the number of unpleasant sensations by increasing the frequency of electric pulses above the frequency of tetanic contraction, provided that the antitumor efficiency of electrochemotherapy remains the same. These assumptions were investigated in the present paper by measuring the muscle torque at different pulse repetition frequencies and at two different pulse amplitudes in rats and studying the antitumor efficiency of electrochemotherapy at different pulse repetition frequencies on tumors in mice. Measurements of muscle torque confirmed that pulse frequencies above the frequency of tetanic contraction (>100 Hz) reduce the number of individual contractions to a single muscle contraction. Regardless of the pulse amplitude, with increasing pulse frequency muscle torque increases up to the frequency of 100 or 200 Hz and then decreases to a value similar to that after application of a 1 Hz pulse train. Electrochemotherapy in vivo with higher repetition frequencies inhibits tumor growth and is efficient at all pulse frequencies examined (1 Hz-5 kHz). These results suggest that there is a considerable potential for clinical use of high frequency pulses in electrochemotherapy.     

Setting optimal parameters for in vitro electrotransfection of B16F1, SA1, LPB, SCK, L929 and CHO cells using predefined exponentially decaying electric pulses

To achieve the maximal introduction of plasmid DNA into cells and, at the same time, to prevent undesirable cell deaths, electrotransfection conditions should be determined for every single cell type individually. In the present study, we determined the optimal electrotransfection parameters for in vitro transfection of B16F1, SA1, LPB, SCK, L929 and CHO cells. Some of these varying parameters were electric field strength, number of applied pulses and their duration, osmolarity of electroporation buffer, plasmid DNA concentration and temperature at which the electroporation was carried out. The maximal transfection rates at optimal electrotransfection parameters in B16F1, SA1, LPB, SCK, L929 and CHO were 85%, 40%, 60%, 1%, 40% and 65%, respectively. The obtained results confirmed that the electroporation is a useful procedure for an in vitro transfection of the majority of mammalian cells. The method, if optimized, may generate reproducibly high proportion of transfected cells among the cell types that are sensitive to electric field action. Thus, the determined parameters could serve for the subsequent implementations of this method.     

Gene delivery by electroporation after dielectrophoretic positioning of cells in a non-uniform electric field

We report the use of dielectrophoresis (DEP) to position U-937 monocytes within a non-uniform electric field, prior to electroporation (EP) for gene delivery. DEP positioning and EP pulsing were both accomplished using a common set of inert planar electrodes, micro-fabricated on a glass substrate. A single-shell model of the cell's dielectric properties and finite-element modeling of the electric field distribution permitted us to predict the major features of cell positioning. The extent to which electric pulses increased the permeability of the cell membranes to fluorescent molecules and to pEGFPLuc DNA plasmids were found to depend on prior positioning. For a given set of pulse parameters, EP was either irreversible (resulting in cytolysis), reversible (leading to gene delivery), or not detectable, depending on where cells were positioned. Our results clearly demonstrate that position-dependent EP of cells in a non-uniform electric field can be controlled by DEP.