Porphyrin, phthalocyanine and porphyrazine derivatives with multifluorenyl substituents as efficient deep-red emitters

The synthesis and photophysical properties are described for a series of porphyrin, phthalocyanine and pyrazinoporphyrazine derivatives which bear four or eight peripheral fluorenyl substituents as antennae. Representative examples are 5,10,15,20-tetra(9,9-dihexyl-9H-fluoren-2-yl)porphyrin (2), 5,10,15,20-tetrakis[4-(9,9-dihexyl-9H-fluoren-2-yl)phenyl]porphyrin (3), 2,3,9,10,16,17,23,24-octakis(9,9-dihexyl-9H-fluoren-2-yl)-29H,31H-phthalocyanine (8) and 2,3,9,10,16,17,23,24-octakis[4-(9,9-dihexyl-9H-fluoren-2-yl)phenyl]-29H,31H-tetrapyrazinoporphyrazine (9). Palladium-mediated Suzuki-Miyaura cross-coupling reactions have been key steps for attaching the substituents. The compounds are deep-red emitters: lambda(max)(em)=659 (3), 737 (8) and 684 nm (9). Their absorption and emission spectra, their fluorescence lifetimes and quantum yields are correlated with the structures of the macrocycles and the substituents. The solution fluorescence quantum yields of porphyrin derivatives substituted with fluorene (2-4) and terphenyl substituents (7) (Phi(f)=0.21-0.23) are approximately twice that of tetraphenylporphyrin. For phthalocyanine derivative 8, Phi(f) was very high (0.88). Specific excitation of the fluorene units of 8 produced emission from both of them (lambda(max)=480 nm) and also from the phthalocyanine core (lambda(max)=750 nm), indicating a competitive rate of energy transfer and radiative decay of the fluorenes. Organic light-emitting devices (OLEDs) were made by spin-coating techniques by using a polyspirobifluorene (PSBF) copolymer as the host blended with 3 (5 wt. %) in the configuration ITO/PEDOT:PSS/PSBF copolymer:3/Ca/Al. Deep-red emission (lambda(max)=663 nm; CIE coordinates x=0.70, y=0.27) was observed with an external quantum efficiency of 2.5 % (photons/electron) (at 7.5 mA cm(-2)), a low turn-on voltage and high emission intensity (luminance) of 5500 cd m(-2) (at 250 mA/ m(2)).     

Molecular Designs and Properties of Highly Efficient Blue Emitters for OLEDs

Advances made in the molecular design of modern optoelectronic materials have made significant contributions toward the development of organic electronics. The organic light-emitting devices (OLEDs) employing monodisperse or polymeric conjugated materials possess the most promising prospects. However, materials suitable for long-term use as blue light emitters are still far from optimization in terms of stability.In the past few years, interesting materials based on 9,9-diaryl-substituted fluorene as a core structure have been developed in our laboratory. We developed a series of efficient and morphologically stable pyrimidine-containing 9,9'-spirobifluorene-cored oligoaryls as pure blue emitters. The steric hindrance inherent with the molecular structure renders the material with a record-high thin-film PL quantum yield of ～95% and a glass transition temperature (Tg) of ～200 ℃.Blue OLEDs employing this thermally stable compound as the emitting host exhibit unusual endurance for high currents. Injection current over 5,000 mA/cm2 and maximal brightness of～80,000 cd/m2 had been demonstrated, representing the highest values reported for blue OLEDs under dc driving. In addition, a series of oligofluorene homologues have been synthesized. These oligofluorenes exhibit interesting reversible bipolar redox properties and excellent morphological and thermal stability. Furthermore, nondispersive ambipolar high hole and electron mobilities over 10-3 cm2/V.s can be achieved with these oligo(9,9-diarylfluorene)s. In particular, the electron mobility observed represents the highest ever reported for amorphous molecular solids. These intriguing properties together with the high quantum yields in thin films make these oligo(9,9-diarylfluorene)s are promising for OLEDs applications as efficient blue emitters. In this meeting, the synthesis and properties of these materials and their highly efficient OLEDs device characteristics will be discussed.     

Novel fluorene/carbazole hybrids with steric bulk as host materials for blue organic electrophosphorescent devices

The problem of self-quenching in organic electrophosphorescence devices has been extensively studied and partially solved by using sterically hindered spacers in phosphorescent dopants. This paper attempts to address this problem by using sterically hindered host materials. Novel fluorene/carbazole hybrids with tert-butyl substitutions, namely 9,9-bis[4-(3,6-di-tert-butylcarbazol-9-yl)phenyl]fluorene (TBCPF) and 9,9-bis[4-(carbazol-9-yl)phenyl]-2,7-di-tert-butylfluorene (CPTBF), have been synthesized and characterized. The compounds exhibit not only high triplet energy (>2.8 eV), but also high glass transition temperature (>160 °C) and thermal stability. The substitution of inert tert-butyl groups to the carbazole/fluorene rings of these host molecules has a remarkable effect on the corresponding properties of the host materials, i.e. enhancing the thermal and electrochemical stability, weakening the intermolecular packing, and tuning the solid-state emission. Blue electrophosphorescent devices with enhanced performance were prepared by utilizing the sterically hindered host materials. The devices based on the four tert-butyl substituted material TBCPF exhibit unusual tolerance of high dopant concentration up to 20% and marked reduction of efficiency roll-off at higher current, indicating significant suppression of self-quenching effect in organic electrophosphorescent devices by the substitution of steric bulks.     

Enhanced efficiency of polyfluorene derivatives: Organic–inorganic hybrid polymer light‐emitting diodes

Two novel organic–inorganic hybrid polyfluorene derivatives, poly{(9,9′‐dioctyl‐2,7‐fluorene)‐co‐(9,9′‐di‐POSS‐2,7‐fluorene)‐co‐[2,5‐bis(octyloxy)‐1,4‐phenylene]} (PFDOPPOSS) and poly{(9,9′‐dioctyl‐2,7‐fluorene)‐co‐(9,9′‐di‐POSS‐2,7‐fluorene)‐co‐bithiophene} (PFT2POSS), were synthesized by the Pd‐catalyzed Suzuki reaction of polyhedral oligomeric silsesquioxane (POSS) appended fluorene, dioctyl phenylene, and bithiophene moieties. The synthesized polymers were characterized with ¹H NMR spectroscopy and elemental analysis. Photoluminescence (PL) studies showed that the incorporation of the POSS pendant into the polyfluorene derivatives significantly enhanced the fluorescence quantum yields of the polymer films, likely via a reduction in the degree of interchain interaction as well as keto formation. Additionally, the blue‐light‐emitting polyfluorene derivative PFDOPPOSS showed high thermal color stability in PL. Moreover, single‐layer light‐emitting diode devices of an indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate)/polymer/Ca/Al configuration fabricated with PFDOPPOSS and PFT2POSS showed much improved brightness, maximum luminescence intensity, and quantum efficiency in comparison with devices fabricated with the corresponding pristine polymers PFDOP and PFT2. In particular, the maximum external quantum efficiency of PFT2POSS was 0.13%, which was twice that of PFT2 (0.06%), and the maximum current efficiency of PFT2POSS was 0.38 cd/A, which again was twice that of PFT2 (0.19 cd/A). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2943–2954, 2006     

一步法合成螺双芴及螺氧杂蒽衍生物及其在有机发光二极管中的应用：性能增强及相关的光学现象关

以芴为原料,以钯为催化剂一步合成了2-(9-苯基芴基)-9,9′螺二芴(PF-SBF)。以PF-SBF作为有机发光二极管的发光及主体材料(FIrpic为磷光客体)时,观察到了不同于PF-SBF及FIrpic发光的红光带。这分别源于PF-SBF分子间的聚集和发光层/传输层诱导的激基复合物。通过选择合适的空穴和电子传输层,有效抑制了激基复合物的发光。同时,PF-SBF和TAPC双主体的结构不仅实现了纯FIrpic和Ir(ppy)3蓝光和绿光,还大幅提升了器件性能。蓝光、绿光器件的最大电流效率和最大亮度分达到16.7、50.5 cd·A^-1和7857 cd·m^-2(11 V)、23390 cd·m^-2(8 V)。另外,除了PF-SBF,利用相似的合成方法,我们也合成了2-(9-苯基芴基)-9,9′螺芴氧杂蒽(PF-SFX),其较大的三线态能级(2.8 eV)较PF-SBF更适合做蓝光主体。以TAPC和PFSFX为双主体的器件最大电流效率提升到了22.6 cd·A^-1。所有实验结果均表明,PF-SBF和PF-SFX是构建高效绿光/蓝光磷光主体材料的有效结构单元。     

Photophysical processes of a fluorene derivative containing 1,3,4-oxadiazole

The photophysical processes of 9,9-bis[4'-[2'-phenyl-5'-(3'-(methacryl-amido)phenyl)]-1',3',4'-oxadiazolylphenyl]fluorene (F-MAOP) formed by Heck reaction of 9,9-bis(4'-iodophenyl)fluorene (F-IP) and 2-phenyl-5-[3'-(methacrylamido)phenyl]-1,3,4-oxadiazole (OXD) have been carefully studied. The results show that the compound emits blue and blue-violet light and the emission spectra exhibit obvious solvent effect. With the increase of polarity of solvents, the fluorescence spectra change obviously and appear blue shift at room temperature. In addition, the light-emitting can be quenched by both electron donor (N,N-dimethylaniline, DMA) and electron acceptor (C60). When N,N-dimethylaniline is gradually added into the solution of F-MAOP, the emission intensities of fluorescence are unusually increased. But when the concentration of DMA beyond a certain scope, the emission intensities of fluorescence are gradually decreased. The dimolecular exciplex between F-MAOP and C60 are formed and the quenching effect follows the Stern-Volmer equation. Moreover, interaction between F-MAOP and carbon nanotubes (CNTs) is also studied by fluorescent quenching.     

Optical and electronic properties of fluorene‐based copolymers and their sensory applications

A series of novel, fluorene‐based conjugated copolymers, poly[(9,9‐bis{propenyl}‐9H‐fluorene)‐co‐(9,9‐dihexyl‐9H‐fluorene)] ( P1 ), poly[(9,9‐bis{carboxymethylsulfonyl‐propyl}fluorenyl‐2,7‐diyl)‐co‐(9,9‐dihexyl‐9H‐fluorene)] ( P2 ) and poly[(9,9‐dihexylfluorene)‐co‐alt‐(9,9‐bis‐(6‐azidohexyl)fluorene)] ( P3 ), are synthesized by Suzuki coupling reactions and their electrochemical properties, in the form of films, are investigated using cyclic voltammetry. The results reveal that the polymer films exhibit electrochromic properties with a pseudo‐reversible redox behavior; transparent in the neutral state and dark violet in the oxidized state. Among the three polymers, P2 possesses the shortest response time and the highest coloration efficiency value. These polymers emit blue light with a band gap value of around 2.9 eV and have high fluorescent quantum yields. Their metal ion sensory abilities are also investigated by titrating them with a number of different transition metal ions; all of these polymers exhibit a higher selectivity toward Fe³⁺ ions than the other ions tested with Stern–Volmer constants of 4.41 × 10⁶M^?1, 3.28 × 10⁷M^?1, 1.25 × 10⁶M^?1, and 6.56 × 10⁶M^?1 for P1 , P2 , water soluble version of P2 ( P2S ) and P3 , respectively. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Highly efficient blue organic light-emitting diodes based on 2-(diphenylamino)fluoren-7-ylvinylarene derivatives that bear a tert-butyl group

Blue fluorescent materials with a 2‐(diphenylamino)fluoren‐7‐ylvinylarene emitting unit and tert‐butyl‐based blocking units were synthesized. The photophysical properties of these materials, including UV/Vis absorption, photoluminescent properties, and HOMO–LUMO energy levels, were characterized and rationalized with quantum‐mechanical DFT calculations. The electroluminescent properties of these molecules were examined through the fabrication of multilayer devices with a structure of indium–tin oxide, 4,4′‐bis{N‐[4‐(N,N‐di‐m‐tolylamino)phenyl]‐N‐phenylamino}biphenyl, 4′‐bis[N‐(1‐naphthyl)‐N‐phenylamino]biphenyl, and blue materials doped in 2‐methyl‐9,10‐di(2‐naphthyl)anthracene/tris(8‐quinolinolato)aluminum/LiF/Al. All devices exhibit highly efficient blue electroluminescence with high external quantum efficiency (3.20–7.72 % at 20 mA cm^?2). A deep‐blue device with Commission Internationale de l’Eclairage (CIE) coordinates of (0.15, 0.11) that uses 7‐[2‐(3′,5′‐di‐tert‐butylbiphenyl‐4‐yl)vinyl]‐9,9‐diethyl‐2‐N‐(3,5‐di‐tert‐butylphenyl)‐2,4‐difluorobenzenamino‐9H‐fluorene as a dopant in the emitting layer showed a luminous efficiency and external quantum efficiency of 3.95 cd A^?1 and 4.23 % at 20 mA cm^?2, respectively. Furthermore, a highly efficient sky‐blue device that uses the dopant 7‐{2‐[2‐(3,5‐di‐tert‐butylphenyl)‐9,9′‐spirobifluorene‐7‐yl]vinyl}‐9,9‐diethyl‐2‐N,N‐diphenylamino‐9H‐fluorene exhibited a luminous efficiency and high quantum efficiency of 10.3 cd A^?1 and 7.7 % at 20 mA cm^?2, respectively, with CIE coordinates of (0.15, 0.20).     

Synthesis, characterization, physical properties, and applications of highly fluorescent pyrene-functionalized 9,9-bis(4-diarylaminophenyl)fluorene in organic light-emitting diodes

A new, highly fluorescent pyrene-functionalized 9,9-bis(4-diarylaminophenyl)fluorene, namely PTF, was synthesized and characterized. This material is an amorphous molecular glass with notably high T_g, is electrochemically stable, and exhibits strong blue emission both in solution and solid state. It shows promising ability as a solution processed blue emitter and hole-transporter for OLEDs. High-efficiency sky-blue and Alq3-based green devices with luminance efficiencies of 1.13 and 4.08 cd/A are achieved, respectively.     

Synthesis and properties of highly refractive polyimides derived from fluorene‐bridged sulfur‐containing dianhydrides and diamines

Highly refractive and transparent polyimides (PIs) based on fluorene‐bridged and sulfur‐containing monomers have been developed. An aromatic dianhydride, 4,4′‐[p‐thiobis(phenylenesulfanyl)]diphthalic anhydride (3SDEA), was polymerized with several fluorene‐containing diamines, including commercially available 9,9′‐bis(p‐aminophenyl)fluorene (APF), 9,9′‐bis[4‐(p‐aminophenoxy)phenyl]fluorene (OAPF), and newly synthesized 9,9′‐bis[4‐(p‐aminophenyl)sulfanylphenyl]fluorene (ASPF) to afford series A PIs. Meanwhile, series B PIs were obtained from a new dianhydride, 4,4′‐[(9H‐fluorene‐9‐ylidene)bis(p‐phenylsulfanyl)]diphthalic anhydride (FPSP) and two aromatic diamines, ASPF and 4,4′‐thiobis[(p‐phenylenesulfanyl)aniline] (3SDA) via a two‐step polycondensation procedure. The PIs exhibit good thermal stabilities, such as relatively high glass transition temperatures in the range of 220–270 °C and high initial thermal decomposition temperatures (T_10%) exceeding 490 °C. The 9,9′‐disubstituted fluorene moieties endow the PI films with good optical transparency. The optical transmittances of the PI films at 450 nm are all higher than 80% for the thickness of about 10 μm. Furthermore, the highly aromatic fluorene moiety and flexible thioether linkages in the molecular chains of the PIs provide them with high refractive indices of 1.6951–1.7258 and small birefringence of 0.0056–0.0070. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1510–1520, 2008     

含硫甲基的芴-苯结构化合物的合成、结构和性能

通过双Suzuki偶联反应一步合成了2种含硫甲基的芴-苯结构化合物2,7-二(4-硫甲基苯基)-9,9-二己基-芴(a)和2,7-二(2,6-二甲基-4-硫甲基苯基)-9,9-二己基-芴(b).紫外-可见和荧光光谱以及分子轨道理论计算表明,位阻较小的化合物a具有更好的共轭性能,其最大紫外-可见吸收波长达到351nm,比两端苯基含4个邻位取代基的化合物b红移了38nm;化合物a的最大荧光发射波长达到410nm,为典型的蓝光化合物,比化合物b红移了43nm.化合物a和b都具有较高的荧光量子产率,分别为59%和65%,在光电材料方面具有潜在的应用前景.     

Selective Introduction of Carbazole and Diphenylamine into Spirofluorenexanthene Core for Different Phosphorescent Hosts

Built on the spiro[fluorene‐9,9′‐xanthene] (SFX) core and two frequently‐used hole‐transporting groups such as carbazole and diphenylamine, two SFX derivatives, namely SFXCz and SFXDPA, have been synthesized by one‐step reaction for red, green and blue phosphorescent organic light‐emitting devices (PHOLEDs). Though the properties of these two groups are very similar, the devices based on SFXCz and SFXDPA exhibit distinct performances. In blue PHOLEDs, the device based on SFXCz exhibited much better performances than that based on SFXDPA. However, the latter was superior to the former in green and red PHOLEDs. And the red PHOLED based on SFXDPA exhibited maximum current efficiency (CE) of 27.1 cd·A^?1, power efficiency (PE) of 25.0 lm·W^?1, and external quantum efficiency (EQE) of 15.0%. The results show that the introduction of diphenylamine group is suitable for constructing green and red host materials, whereas the introduction of carbazole group is suitable for constructing blue host materials.     

Synthesis and properties of photoluminescent polymers bearing electron‐facilitating oxadiazole derivative side groups

Poly(p‐divinylene phenylene) derivatives bearing fluorene and carbazole units in the main chain and 5‐phenyl‐1,3,4‐oxadiazole moieties as side groups were prepared by the polycondensation of a newly synthesized monomer, [2‐(5′‐phenyl‐1′,3′,4′‐oxadiazole‐2′‐yl)‐1,4‐xylylene]bis(triphenyl phosphonium bromide) (OXAD), with 9,9‐dibutylfluorene‐2,2′‐dicarbaldehyde (DBFDA) and 9‐(2‐ethylhexyl)carbazole‐3,6‐dicarbaldehyde (EHCDA), which gave DBFDA–OXAD and EHCDA–OXAD. Analogues of these polymers without the side groups were also synthesized by the reaction of 1,4‐xylene bis(triphenyl phosphonium bromide) (PXYL) with the dicarbaldehydes, which gave DBFDA–PXYL and EHCDA–PXYL. All the synthesized polymers are soluble in organic solvents, giving films of good quality. The polymers are stable beyond 375 °C. They emit blue and blue‐green light, and their quantum yields are 38–79% in solution and 1–24% in film, depending on the fluorene and carbazole units as well as the side groups. In particular, the OXAD‐based polymers contain hole‐facilitating backbones and electron‐facilitating side groups, perhaps allowing these polymers to transport both holes and electrons. Overall, the synthesized polymers are potential candidates for the fabrication of light‐emitting devices. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1173–1183, 2002     

Efficient greenish blue electrochemiluminescence from fluorene and spirobifluorene derivatives

The spectroscopic and electrochemical behavior as well as electrogenerated chemiluminescence (ECL) of a series of donor-π-donor derivatives bearing triphenylamine groups as donor connected to a fluorene, 2,7-bis-(4-(N,N-diphenylamino)phen-1-yl)-9,9'-dimethylfluorene (1), or spirobifluorene core, 2,7-bis-(4-(N,N-diphenylamino)phen-1-yl)-9,9'-spirobifluorene (2) and 2,2',7,7'-tetrakis(4-(N,N-diphenylamino)phen-1-yl)-9,9'-spirobifluorene (3), were investigated. Besides a high photoluminescence (PL) quantum yield in solution (between 81 and 87%), an efficient radical ions annihilation process induces intense greenish blue ECL emission that could be seen with the naked eye. Only the tetrasubstituted spirobifluorene derivative (compound 3) shows weak ECL obtained by a direct annihilation mechanism. Because the energy of the annihilation reaction is higher than the energy required to form the singlet excited state, the S-route could be considered the pathway followed by the ECL process in these molecules. The ECL emissions recorded by direct ion-ion annihilation show two bands compared to the single structureless PL band. The ECL spectra obtained by a coreactant approach using benzoylperoxide as a coreagent show no differences relative to that produced by annihilation, except for an increasing of ECL intensity for all compounds.     

Novel Soluble Fluorene–Thienothiadiazole and Fluorene–Carbazole Copolymers for Optoelectronics

Summary: Optical, photophysical, electrochemical and photoelectrical properties of novel soluble low-bandgap fluorene – thienothiadiazole based copolymers ( CHTF and CDTF ) and luminescent fluorene – carbazole copolymers, ( CFCzE and CFCZA ) were studied. Fluorene – thienothiadiazole copolymers exhibit in thin films long-wavelength absorption with maxima at 750 – 785 nm and possess low bandgap, high electron affinity and exhibit reversible electrochromic behaviour. Therefore they are of interest for electrochromic and photovoltaic applications. Spectroelectrochemical study was performed and optical switching was demonstrated. Photovoltaic devices with bulk heterojunction made of blends of copolymers and fullerene derivative [60]PCBM were prepared. The power conversion efficiency was 2–3%. On the other hand, the fluorene-carbazole copolymers exhibit blue photoluminescence with high quantum efficiency in solution and also in thin films. Light-emitting devices with intensive broad bluish-green-white emission were fabricated.     

Synthesis and properties of new fluorene‐based polyquinoxalines with an ether linkage in the main chain for light‐emitting diodes

A new series of fluorene‐based polyquinoxalines with an ether linkage in the main chain were prepared by the polycondensation reaction between a tetraketone monomer and 3,3′,4,4′‐tetraaminodiphenyl ether. The polycondensation was usually carried out in m‐cresol. The resulting polymers ( P1 – P3 ) [ P1 = poly(quinoxaline‐co‐9,9‐dihexyl‐2,7‐dimethyl‐9H‐fluorene) P2 = poly(quioxaline‐co‐9,9‐dihexyl‐9‐pentyl‐2,7‐di‐p‐tolyl‐9H‐fluorene) P3 = poly(quioxaline‐co‐9,9‐bis‐(4‐methoxy‐phenyl)‐2,7‐dimethyl‐9H‐fluorene)] showed good solubility in common organic solvents and high thermal stability with only a 5% weight loss up to 440 °C. P1 and P2 had very high glass‐transition temperatures of 212 and 223 °C, respectively, whereas P3 did not show any phase‐transition temperature in repeated scans up to 300 °C. All the polymers in photoluminescence showed blue emissions in the range of 432–465 nm, both in chloroform solutions and in thin films. Light‐emitting diode devices of the configuration indium tin oxide/poly(3,4‐ethylenedioxythiophene)/polymer:poly(N‐vinylcarbazole) blend (2:8)/LiF/Al were fabricated with P1 or P2 and emitted blue light with electroluminescence peak wavelengths of 434 and 448 nm, respectively. The maximum brightness and the external quantum efficiency of P1 were 0.56 μW/cm² at 29 V and 0.056%, whereas P2 showed 0.50 μW/cm² at 34 V and a relatively low value of 0.015%, respectively. Cyclic voltammetry studies revealed that these polymers possessed low‐lying ionization potential energy levels ranging from ?5.49 to ?5.86 eV and low‐lying electron affinity energy levels ranging from ?2.65 to ?2.88 eV. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1189–1198, 2006     

Preparation and properties of polybenzimidazoles containing cardo groups

Several polybenzimidazoles containing cardo groups were prepared: A cardodicarboxylic acid, 9,9-bis(4-carboxyphenyl)fluorene, and two cardotetramines, 9,9-bis(3,4-diaminophenyl)fluorene and 9,9-bis(3,4-diaminophenyl)10-anthrone. The cardodicarboxylic acid was condensed with aromatic tetramines and the cardotetramines were condensed with aromatic dicarboxylic acids. Prior to polymer synthesis two model compounds, 9,9-bis[4,(2-benzimidazolyl)phenyl]fluorene and 2,2′-diphenyl-5,5′-(9,9-fluorenediyl)-bibenzimidazole were prepared and characterized by spectral methods. The polymers were obtained in 60–70% yield and showed reduced viscosity in the range of 0.7–1.1 dL/g. They were soluble in dimethyl formamide (DMF) and chlorinated solvents like tetrachlorethane. The thermal stabilities of these cardopolymers were superior to noncardopoly-benzimidazoles.     

Synthesis of Dendritic Oligo‐Spiro(fluorene‐9,9′‐xanthene) Derivatives with Carbazole and Fluorene Pendants and their Thermal,Optical, and Electroluminescent Properties

Two novel spiro‐configured ter(arylene‐ethynylene) derivatives, TSF‐Cz and TSF‐F , have been designed and synthesized using spiro(fluorene‐9,9′‐xanthene) (SFX) as building blocks, introducing a hole‐transporting carbazole and a fluorene chromophore as the peripheral functional group into the backbone through an oxygen atom. The two well‐defined oligomers possess good solubility, film‐forming quality, and high T_g's at 140 and 126 °C, respectively. In addition, these oligomers exhibit blue photoluminescence (PL) emission both in solution and solid states. The double‐layered devices fabricated using the two materials as the emitter show a sky‐blue emission with a brightness and a current efficiency of 7 613 cd · m⁻² and 1.11 cd · A⁻¹ for TSF‐Cz , and 1 507 cd · m⁻² and 0.36 cd · A⁻¹ for TSF‐F , respectively.

     

Tri-, tetra- and pentamers of 9,9'-spirobifluorenes through full ortho-linkage: high triplet-energy pure hydrocarbon host for blue phosphorescent emitter

4,4'-Dibromo-9,9'-spirobifluorene was first synthesized, and from this intermediate, three fully ortho-linked tri-, tetra-, and pentamers of 9,9'-spirobifluorenes were constructed. The full ortho-linkage impedes the π conjugation of fluorene units, and guarantees their high triplet energies (E(T) = 2.80 eV). A device with the trimer as the first pure hydrocarbon host material for blue phosphor FIrpic shows a maximum current efficiency of 25 cd/A.     

New poly(amide-lmide)s syntheses. XV. Preparation and properties of poly(amide-imide)s derived from 9, 9-bis[4-(4-aminophenoxy) phenyl]fluorene and various bis(trimellitimide)s

Fifteen bis(phenoxy) fluorene-containing poly(amide-imide)s III were synthesized by the direct polycondensation of 9,9-bis[4-(4-aminophenoxy)phenyl]fluorene (BAPPF) with var-ious aromatic bis(trimellitimide)s II in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. Poly(amide-imide)s III having inherent vis-cosities up to 1.45 dL/g were obtained in quantitative yields. Most of the resulting polymers showed an amorphous nature and were readily soluble in polar solvents such as NMP and N,N-dimethylacetamide. All the soluble poly(amide-imide)s afforded transparent, flexible, and tough films. The glass transition temperatures of these polymers were in the range of 263–315°C and the 10% weight loss temperatures were above 510°C in nitrogen. Some properties of poly(amide-imide)s III were compared with those of the corresponding isomeric poly(amide-imide)s III ′ prepared from 9,9-[4-(4-trimellitimidophenoxy)phenyl]fluorene and various aromatic diamines. © 1995 John Wiley & Sons, Inc.