Monte Carlo simulation and electrochemical performance corrosion inhibition whid benzimidazole derivative for XC48 steel in 0.5 M H2SO4 and 1.0 M HCl solutions

The inhibition of 1-(4-methoxybenzyl)-2-(4-methoxyphenyl)-1H-benzimidazole (MMB) on corrosion of XC48 steel in solutions 1.0 M HCl and 0.5 M H₂SO₄ were studied by potentiodynamic polarization and electrochemical impedance spectroscopy techniques (EIS). Potentiodynmic polarization curves revealed that MMB acts as a mixed-type inhibitor in both acidic media. The impedance results indicated that the corrosion process occurs under activation control. Furthermore, MMB shows a higher inhibition efficiency in HCl (97%) than in H₂SO₄ (92%) at 10^?4 M MMB. The values of ΔG°_ads, ΔH_a, E_a and ΔS_a in temperature range 293–323 K indicated that MMB strongly retarded the corrosion of XC48 steel in both solutions by a chemisorptions process. The adsorption of Benzimidazole (MMB) on carbon steel surface followed Langmuir adsorption isotherm. Scanning electron microscopy (SEM) analysis confirmed that there is an adsorbed film on the surface of XC48 steel. The results of Monte Carlo simulations studies confirmed the inhibition action of MMB.     

Antibacterial drugs as environmentally-friendly corrosion inhibitors for carbon steel in acid medium

The effect of cefazolin (CZ) and cefotaxime (CT) as corrosion inhibitors for carbon steel in 0.5 M H₂SO₄ solution was investigated by use of potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), electrochemical frequency modulation (EFM), and scanning electron microscopy (SEM). CZ and CT acted as mixed-type inhibitors. Inhibition increased with increasing inhibitor concentration and decreased with increasing temperature. Adsorption of the inhibitors obeyed the Langmuir adsorption isotherm. SEM confirmed inhibition by the inhibitors. Inhibition by 5 × 10^?4 M CZ and 7 × 10^?4 M CT approached 99.6 % and 90.9 %, respectively. The EIS and EFM results were in good agreement with the potentiodynamic data.     

Evaluation of the inhibitive effect of essential oil of Lavandula multifida L., on the corrosion behavior of C38 steel in 0.5 M H2SO4 medium

The essential oil of the aerial parts of Lavandula multifida L., collected in Errachidia region (three samples) in southeast Morocco, was extracted by hydrodistillation and analyzed by GC and GC-MS. The oil was predominated by carvacrol (57.9–59.0%). L. multifida oil was tested as corrosion inhibitor of C38 steel in 0.5 M H₂SO₄ using weight loss measurements, electrochemical polarization, and EIS methods. The results obtained by measurements of weight loss showed that inhibition efficiency increases with inhibitor concentration to attain 72.2% at 2 g/l of oil at 298 K. Polarization curves revealed that L. multifida oil acts as mixed type inhibitor. The temperature effect on the corrosion behavior of steel in 0.5 M H₂SO₄ without and with the inhibitor at 2 g/l was studied in the temperature range from 303 and 343 K. The adsorption of inhibitor on the C38 steel surface was found to be a spontaneous process and to obey Langmuir’s adsorption isotherm. The associated activation energy has been determined.     

Inhibition Effect of N-(Pyridin-2-yl-Carbamothioyl) Benzamide on the Corrosion of C-Steel in Sulfuric Acid Solutions

N-(Pyridin-2-yl-carbamothioyl)benzamide (PCMB) was newly synthesized and tested as a corrosion inhibitor for C-steel in 0.5 M H₂SO₄ using chemical and electrochemical techniques. Polarization measurements showed that the synthesized compound acted as a mixed inhibitor. The inhibition efficiencies obtained from the different methods were in good agreement. The inhibitive action of this compound is discussed in terms of blocking the electrode surface by adsorption of the inhibitor according to the Langmuir isotherm. The effect of temperature on the corrosion behavior in the absence and presence of 2.5 × 10^?5 M of PCMB was studied (283–308 K). The associated activation energies (E _a) and the thermodynamic parameters (ΔH*, ΔS*, K _ads, ΔG°_ads) for the adsorption process were determined. The ΔG°_ads value is ?36.55 kJ/mol, which indicated that the adsorption mechanism of PCMB on C-steel in 0.5 M H₂SO₄ solution was combined between physisorption and chemisorption processes.     

Hydroclathrus clathratus marine alga as a green inhibitor of acid corrosion of mild steel

The corrosion inhibitive and adsorption behaviors of Hydroclathrus clathratus on mild steel in 1 M HCl and 1 M H₂SO₄ solutions at 303, 313 and 323 K were investigated by weight loss, electrochemical, and surface analysis techniques. The results show that H. clathratus acts as an inhibitor of corrosion of mild steel in acid media. The inhibition efficiency was found to increase with increase in inhibitor concentration but to decrease with rise in temperature, suggestive of physical adsorption. The adsorption of the inhibitor onto the mild steel surface was found to follow the Temkin adsorption isotherm. The inhibition mechanism was further corroborated by the results obtained from electrochemical methods. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses supported the inhibitive action of the alga against acid corrosion of mild steel.     

向日葵盘果胶对碳钢的缓蚀性能研究

以向日葵盘为原料,利用纤维素酶制备果胶(SFP)。采用静态失重、极化曲线和交流阻抗技术研究SFP在1mol/L HCl及0.5mol/L H_2SO_4溶液中对碳钢的缓蚀性能,并探讨其在碳钢表面的吸附机理。结果表明,缓蚀效率随SFP浓度增大而增大,随温度升高而降低。在HCl和H_2SO_4溶液中,SFP的吸附方式分别服从Langmuir和Temkin等温式,属于物理吸附;极化曲线测试显示SFP是一种混合型缓蚀剂。本文的研究表明,向日葵盘果胶是碳钢的绿色高效缓蚀剂,且在HCl溶液中的缓蚀性能优于在H_2SO_4溶液中。     

Experimental and theoretical studies on protecting steel against 0.5 M H2SO4 corrosion by new schiff base

In this study, a novel green corrosion inhibitor called 2,2'-((1Z,1′Z)-((piperazine-1,4-diylbis(2,1-phenylene))bis(methanylylidene))bis(azanylylidene)) (PMA) has been tested against corrosion of carbon steel in 0.5 M H₂SO₄. Quantum and electrochemical methods were used to evaluate PMA's ability to inhibit the deterioration of carbon steel in an acidic environment. The results revealed that PMA acted as a mixed inhibitor, primarily anodic, whose inhibition action was enhanced by increasing its concentration. At 298.15 K, the maximum efficiency was around 91% with 1 × 10^?3 M PMA in 0.5 M H₂SO₄. The results showed that the inhibition occurred due to adsorption of the PMA molecules on the surface. The adsorbed layer of PMA satisfied the Langmuir adsorption isotherm. The morphology of the surface was examined using scanning electron microscopy.     

Surface morphological and impedance spectroscopic studies on the interaction of polyethylene glycol (PEG) and polyvinyl pyrrolidone (PVP) with mild steel in acid solutions

The inhibition of mild steel corrosion in aerated acid mixture of 0.5 N H₂SO₄ and 0.5 N HCl solution was investigated using potentiodynamic polarization studies, linear polarization studies, electrochemical impedance spectroscopy, adsorption, and surface morphological studies. The effect of inhibitor concentration on corrosion rate, degree of surface coverage, adsorption kinetics, and surface morphology is investigated. The inhibition efficiency increased markedly with increase in additive concentration. The presence of PEG and PVP decreases the double-layer capacitance and increases the charge-transfer resistance. The inhibitor molecules first adsorb on the metal surface following a Langmuir adsorption isotherm. Both PEG and PVP offer good inhibition properties for mild steel and act as mixed-type inhibitors. Surface analysis by scanning electron microscopy (SEM) and atomic force microscopy (AFM) shows that PVP offers better protection than PEG.     

Inhibition effect of hexadecyl pyridinium bromide on the corrosion behavior of some austenitic stainless steels in H2SO4 solutions

The inhibition effect of hexadecyl pyridinium bromide (HDPB) as a cationic surfactant on the corrosion behavior of some Egyptian austenitic stainless steel SS 304L, SS 316H and SS 304H in 0.5 M H₂SO₄ solutions was investigated by using potentiodynamic polarization technique and electrochemical impedance spectroscopy (EIS). The results indicate that HDPB is a good inhibitor for the samples under investigation in 0.5 M H₂SO₄ solutions. In addition, the inhibition efficiency η% increases with the inhibitor concentration while decreases with the increasing temperature referring to physical adsorption. The adsorption of the inhibitor obeys a Temkin adsorption isotherm. Polarization curves show that HDPB is a mixed inhibitor in H₂SO₄ solutions. The results obtained from polarization and impedance measurements are in good agreement. Activation-free energies, enthalpies, and entropies for the inhibition process of HDPB were determined.     

The litchi (Litchi Chinensis) peels extract as a potential green inhibitor in prevention of corrosion of mild steel in 0.5 M H2SO4 solution

The corrosion inhibition of mild steel in 0.5 M H₂SO₄ solution by the extract of litchi peel (Litchi chinensis) was studied by weight loss method, potentiodynamics polarization and electrochemical impedance spectroscopy (EIS). The results show that the litchi peels extract acts as mixed-type inhibitor. The inhibition of corrosion is found to be due to adsorption of the extract on metal surface, which is in conformity with Langmuir’s adsorption isotherm. UV–Vis, Fourier transform infrared (FT-IR) spectroscopy and Scanning electron microscopy (SEM) studies confirm that the inhibition of corrosion of mild steel occurs through adsorption of the inhibitor molecules.     

Electrochemical behaviors and determination of melamine in neutral and acid aqueous media

The electrochemical behaviors of melamine (MEL) were studied at paraffin-impregnated graphite electrode in PBS (pH 7.0) and 0.5 M H₂SO₄. Various methods including UV–vis thin-layer spectroelectrochemistry, infrared spectra (IR) and electrochemicatry have been performed to investigate the characteristics. In 0.1 M PBS (pH 7.0), MEL loses two electrons to form a dication, which couples head-to-head with a neutral molecule of MEL to form a dimer accompanying the production of azocompound, the dimer plays a role of a monomer in the following polymerization. In 0.5 M H₂SO₄, unstable MEL mostly hydrolyzes to form ammeline, ammelide, s-triazine-2,4,6-trion, and tricyanic acid, respectively; The hydrolysis could be accelerated by electrochemical method; Meanwhile, MEL associates tricyanic acid to give a plane molecule cake by hydrogen bonding. The spectra responses of MEL at 205 and 234 nm are linearly increasing in a same concentration range of 1.0 × 10⁻⁷–1.0 × 10⁻⁵ M in 0.5 M H₂SO₄ (determination limit, 1 × 10⁻⁸ and 3 × 10⁻⁸ (3σ)). The proposed method was successfully applied to the determination of MEL in real sample.

     

Synthesis,X-ray structure and theoretical study of benzazole thioether and its zinc complex as corrosion inhibitors for steel in acidic medium

A ligand, 2-((benzo[d]thiazol-2-ylthio)methyl)-1H-benzo[d]imidazole, and its zinc complex have been synthesized. The structure of these compounds have been determined by spectroscopic techniques and single crystal X-ray diffraction. The corrosion inhibition study of these compounds for steel in 0.5 M H₂SO₄ medium has also been investigated using potentiodynamic polarization and EIS techniques. The quantum calculations were applied to investigate the relationship between the electronic properties and the corrosion inhibition efficiency of the two benzazoles derivatives. Surface analysis (XRF) indicated that the rust layer formed on the Cu-containing steels was enriched with Cu compounds. Polarization curves revealed that both inhibitors acted as a mixed-type inhibitor.     

Influence of purine on copper behavior in neutral and alkaline sulfate solutions

The effect of purine (concentration range of 1.00 × 10^?6?C1.00 × 10^?2 M) on the behavior of copper in a 0.5 M Na₂SO₄ solution (pH 7 and pH 9) was studied using the open circuit potential measurement, potentiodynamic polarization, and chronoamperometry. Potentiodynamic polarization shows that purine acts as a copper corrosion inhibitor in both alkaline and neutral sulfate solutions. The efficiency of inhibition increases as the purine concentration increases. Chronoamperometric results follow the same trend as the results of potentiodynamic polarization. The inhibition effect can also be observed visually by microscopic examination of the electrode surface. Purine is adsorbed on copper surface according to the Langmuir adsorption isotherm.     

MPEC-IMI as an effective green inhibitor to protect Q235 steel in 0.5 M HCl medium

Imidazole (IMI)-based polyethylene glycol monomethyl ether (MPEC-IMI) as a novel green corrosion inhibitor was synthesized to protect the Q235 steel in 0.5 M HCl corrosive medium at 318 K. The inhibition performance of MPEC-IMI was investigated by weight loss measurement, the electrochemical method (Tafel and EIS) and surface analysis (SEM and EDX). The results reveal that the MPEC-IMI shows enhanced anticorrosion performance for carbon steel, which is attributed to the formation of the adsorptive protection film on the surface, and the type of adsorption basically obeys the Langmuir monolayer adsorption. Furthermore, when the concentration of MPEC-IMI is 300 mg L^?1, the corrosion inhibition efficiency can reach up to 92.00%. In support of further study of the corrosion inhibition behavior by virtue of quantum chemical calculation and molecular dynamics simulations, the results show that the MPEC-IMI molecule has high reactivity and strong interaction on the iron surface.     

A study of synthesized Mannich base inhibition on mild steel corrosion in acid medium

1((Cyclohexylamino)methyl)urea Mannich base was synthesized and characterized using FT-IR, H¹NMR and C¹³NMR spectra and it was tested as a corrosion inhibitor for mild steel in 1?N HCl and 1?N H₂SO₄ solutions using potentiodynamic polarization and AC impedance techniques over the temperature range of 303?C333?K. The inhibition efficiency was increased with respect to concentration of inhibitor and temperature in 1?N HCl, whereas the inhibition efficiency was increased with respect to concentration of inhibitor and decreased with respect to temperature in 1?N H₂SO₄. Potentiodynamic polarization results revealed that the inhibitor acts as mixed type inhibitor. AC impedance study indicates that the corrosion of steel was mainly controlled by a charge transfer process. Surface analysis was carried out using SEM technique. The adsorption of inhibitor follows Langmuir adsorption isotherm. Activation and adsorption parameters were calculated to gain information about the inhibitive action mechanism.     

Experimental, quantum chemical calculations, and molecular dynamic simulations insight into the corrosion inhibition properties of 2-(6-methylpyridin-2-yl)oxazolo[5,4-f][1,10]phenanthroline on mild steel

2-(6-Methylpyridin-2-yl)oxazolo[5,4-f][1,10]phenanthroline (MOP) was synthesized and characterized by elemental analysis and Fourier-transform infrared (FT-IR), ¹H nuclear magnetic resonance (NMR), and ¹³C NMR spectra. MOP was evaluated as a corrosion inhibitor for carbon steel in 0.5 M H₂SO₄ solution using the standard gravimetric technique at 303–333 K. Quantum chemical calculations and molecular dynamic (MD) simulations were applied to analyze the experimental data and elucidate the adsorption behavior and inhibition mechanism of MOP. Results obtained show that MOP is an efficient inhibitor for mild steel in H₂SO₄ solution. The inhibition efficiency was found to increase with increase in MOP concentration but decreased with temperature. Activation parameters and Gibbs free energy for the adsorption process using statistical physics were calculated and discussed. The adsorption of MOP was found to involve both physical and chemical adsorption mechanisms. Density functional theory (DFT) calculations suggest that nitrogen and oxygen atoms present in the MOP structure were the active reaction sites for the inhibitor adsorption on mild steel surface via donor–acceptor interactions between the lone pairs on nitrogen and oxygen atoms together with the π-electrons of the heterocyclic and the vacant d-orbital of iron atoms. The adsorption of MOP on Fe (1 1 0) surface was parallel to the surface so as to maximize contact, as shown in the MD simulations. The experiments together with DFT and MD simulations provide further insight into the mechanism of interaction between MOP and mild steel.     

Carmine and Fast Green as Corrosion Inhibitors for Mild Steel in Hydrochloric Acid Solution

The inhibition action of carmine and fast green dyes on corrosion of mild steel in 0.5 M HCl was investigated using mass loss, polarization and electrochemical impedance (EIS) methods at 300 K. The inhibition efficiency was found to increase with increasing concentration of the inhibitors. The inhibition efficiency of fast green (%η - 98) is higher than that of carmine (%η - 92) and found to be maximum in 1 × 10^-3 M solution. The inhibitors act as mixed type with predominant cathodic effect. The inhibitors were adsorbed on the mild steel surface according to the Temkin adsorption isotherm. The surface morphology of the mild steel specimens was evaluated using SEM images.     

Corrosion inhibition investigations of 3-acetylpyridine semicarbazone on carbon steel in hydrochloric acid medium

The corrosion inhibition efficiency of 3-acetylpyridine-semicarbazide (3APSC) on carbon steel (CS) in 1.0 M HCl solution has been investigated using weight loss measurements, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization studies. The results show that inhibition efficiency on metal increases with the inhibitor concentration. 3APSC exhibited marked inhibition towards carbon steel in HCl medium even at low concentrations. The adsorption of inhibitor on the surfaces of the corroding metal obeys the Langmiur isotherm and thermodynamic parameters (K _ads, ?G _ads ⁰ ) were calculated. Activation parameters of the corrosion process (E _a, ?H* and ?S*) were also calculated from the corrosion rates. Polarization studies revealed that 3APSC act as a mixed-type inhibitor. Surface analysis of the metal specimens was performed by scanning electron microscopy.     

Corrosion prevention of mild steel in acidic medium by 2-Pyrrolidin-1-yl-1,3-thiazole-5-carboxylic acid: Theoretical and experimental approach

The inhibition efficiency of 2-Pyrrolidin-1-yl-1,3-thiazole-5-carboxylic acid (PTCA) against mild steel (MS) corrosion was investigated in acidic solution by using quantum chemical calculations based on Density Functional Theory (DFT) method and electrochemical measurements. The electrochemical impedance spectroscopy (EIS), potentiodynamic, potential zero charge (pzc) analysis and electrochemical noise (EN) measurements at various concentrations (from 0.1 to 10 mM) and immersion times were utilized in experimental part. The surface analysis was achieved scanning electron microscope (SEM) and contact angle measurements in the absence and presence of 10 mM PTCA. According to DFT results, PTCA exhibited 3.737 eV band gap and 8.130 Debye dipole moment which were a signal of potentially convenient corrosion inhibitor properties. PTCA has a remarkable corrosion inhibition capability to mild steel, which inhibited both anodic and cathodic corrosion rates, relying on it's physically adsorption on the metal solution interface and protection ability was increased with increasing PTCA concentration. The obtained adsorption equilibrium constant was 11.11 × 10³ M^-1 and calculated standard free energy of adsorption was ?33.03 kJ mol^?1. The determined activation energy values were 55.58 kJ mol^?1 and 96.86 kJ mol^?1 in 0.5 M HCl in the absence and presence of 10 mM PTCA, respectively. PTCA demonstrated a strong inhibition efficiency of 98.3%, after 168 h immersion, according to the EIS results. As a consequently, we recommend that PTCA is a convenient inhibitor in 0.1 M HCl for mild steel protection against corrosion.     

On the corrosion inhibition of iron in hydrochloric acid solutions,Part I: Electrochemical DC and AC studies

The inhibitive action of 4-methyl pyrazole (4MP) against the corrosion of iron (99.9999%) in solutions of hydrochloric acid has been studied using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). At inhibitor concentration range (10^?3–10^?2 M) in 1.0 M acid, the results showed that 4MP suppressed mainly the anodic processes of iron corrosion in 1.0 M HCl by adsorption on the iron surface according to Temkin adsorption isotherm. Both potentiodynamic and EIS measurements reveal that 4MP inhibits the iron corrosion in 1.0 M HCl and that the efficiency increases with increasing inhibitor concentration. Data obtained from EIS were analyzed to model the corrosion inhibition process through an equivalent circuit.