基于碳纳米管/L-半胱氨酸/Fe3O4@Au纳米复合材料的电流型甲胎蛋白免疫传感器的研究

将DMF(N,N-二甲基甲酰胺)分散的多壁碳纳米管(MWNT)修饰在金电极表面,再将修饰电极依次沉积纳米金和L-半胱氨酸(L-Cys),并通过半胱氨酸中的巯基吸附Fe3O4@Au纳米复合材料,再固载甲胎蛋白抗体(anti-AFP),以牛血清白蛋白(BSA)封闭非特异性吸附位点,构建了高灵敏、稳定的新型电流型甲胎蛋白免疫传感器。实验通过扫描透射电子显微镜(TEM)对DMF-MWNT和Fe3O4@Au复合纳米粒子进行了表征。在优化的实验条件下,此免疫传感器对甲胎蛋白抗原的检测范围为0.1～150μg/L,检出限为0.03μg/L。     

苯并噻唑和铁氧化物纳米粒子修饰的磁性棒碳糊电极上肼的电催化氧化反应：同时检测肼和苯酚

开发了一种磁性Fe3O4纳米粒子和2-(3,4-二羟苯基)苯并噻唑(DPB)修饰的磁性棒碳糊电极(MBCPE)用于电化学检测肼.首先将DPB自组装在Fe3O4纳米粒子上,然后将此复合物吸附于设计的MBCPE上. MBCPE电极将磁性纳米粒子吸引到电极表面.所得新型电极具有高的导电性和大的有效比表面积,因而对肼的电催化氧化反应有非常大的电流响应.采用伏安法、扫描电镜、电化学阻抗谱、红外光谱和紫外-可见光谱对修饰电极进行了表征.采用伏安法研究了在磷酸盐缓冲溶液(pH=7.0)中MBCPE/Fe3O4NPs/DPB电极上肼的电化学行为.作为电化学传感器, MBCPE/Fe3O4NPs/DPB电极对肼氧化反应表现出极高的电催化活性.在DPB存在下,肼的氧化电势下降,但其催化电流增加.电催化电流与肼浓度在0.1–0.4和0.7–12.0μmol/L二个区间内表现出线性关系,检测限为18.0 nmol/L.另外,研究了MBCPE/Fe3O4NPs/DPB电极同时检测肼和苯酚的性能.伏安实验结果显示,苯酚的线性区域为100–470μmol/L,检测限为24.3μmol/L.采用此电极检测了水样品中的肼和苯酚.     

PVP-b-PLA修饰Fe_3O_4磁性纳米粒子的制备与表征

通过硅烷偶联剂与Fe3O4磁性纳米粒子偶合在其表面引入C C端基,进一步与N-乙烯基吡咯烷酮(NVP)加成聚合制备含端羟基PVP包裹的磁体,再引发丙交酯(LA)开环聚合制得PVP-b-PLA修饰的Fe3O4纳米粒子.通过XRD、GPC、FTIR、SEM、TG、DSC和激光粒度仪等,对产物进行分析和表征,结果表明,纳米Fe3O4与PVP以及PVP与PLA之间均为化学键联,PVP和PLA是以嵌段共聚物的形式存在且两者之间存在明显的微相分离,纳米Fe3O4表面聚合物包覆率为35%,厚度约13 nm.此外,该PVP-b-PLA包覆的磁性纳米粒子比饱和磁化强度为53 emu/g,与未包覆相比下降约25%.     

磁性无机-生物复合粒子敏感膜新型电流型免疫传感器的研究

合成了磁性Fe3O4纳米粒子,利用3-氨基丙基三乙氧基硅烷(APS)进行硅烷化,形成表面带有氨基的磁性Fe3O4纳米复合粒子,再用戊二醛将羊抗人免疫球蛋白G抗体(anti-IgG)固定在该磁性粒子表面,通过磁力将其修饰于固体石蜡碳糊电极表面制作成免疫传感器。与标记HRP的二抗体anti-IgG结合,以对苯二酚作为电子媒介体,实现对人免疫球蛋白G(IgG)的定量检测。IgG测定线性范围为2.5~400μg/L,检出限为0.75μg/L。该免疫传感器制作简单,成本低,表面更新方便,可用于临床血清检测。     

镍纳米粒子修饰碳糊电极直接电催化鸟嘌呤的研究

将镍纳米粒子与石蜡、石墨按照一定比例混合制备镍纳米粒子修饰碳糊电极,采用循环伏安法(CV)对修饰碳糊电极进行电化学表征,在0.1 mol/L B-R缓冲溶液(pH4.5)中研究了鸟嘌呤在该修饰电极上的电化学行为。结果表明,与裸碳糊电极相比,以掺杂法制备的镍纳米粒子修饰电极能够明显降低鸟嘌呤的过电位,增大其氧化电流,很好地催化氧化鸟嘌呤。在优化的实验条件下,鸟嘌呤在该修饰电极上的氧化峰电流与其浓度在1.0×10-5~5.0×10-4mol/L范围内呈良好的线性关系,检出限(3σ)为7.5×10-6mol/L。     

基于四氧化三铁磁性纳米粒子的微囊藻毒素免疫传感器研究

采用化学共沉淀法制备四氧化三铁(Fe3O4)磁性纳米粒子(MNPs),依次用3-氨基丙基三乙氧基硅烷(APTS)、丁二酸酐(SAH)对Fe3O4 MNPs表面进行修饰,得到羧基功能化的核壳型磁性纳米粒子(Fe3O4@APTS·SAH MNPs),分别采用透射电镜(TEM)、磁滞回线、X射线光电子能谱(XPS)和傅里叶红外光谱(FTIR)对其进行了表征.将此纳米粒子修饰在自制的磁性玻碳电极(MGCE)表面,用1-(3-二氨基丙基)-3-乙基碳二亚胺盐酸盐(EDC)和N-羟基琥珀酰亚胺(NHS)活化纳米粒子表面的羧基,通过与氨基的共价交联,将抗微囊藻毒素-(亮氨酸-精氨酸)(MCLR)抗体(anti-MCLR)固定于该修饰电极上,用牛血清白蛋白(BSA)封闭非特异性吸附位点,构建了一种检测MCLR的电流型免疫传感器.采用直接竞争免疫反应模式,在标记物辣根过氧化物酶(HRP)的MCLR (MCLR-HRP)存在下,利用差分脉冲伏安法(DPV)测定溶液中的微囊藻毒素.在优化的实验条件下,免疫传感器对MCLR的线性测定范围为0.05 ～ 100 μg/L,检出限为0.01 μg/L(S/N=3).构建的免疫传感器呈现出良好的重现性、稳定性和特异性.将本传感器用于实际水样的测定,加标回收率为94.3％ ～ 99.5％.     

基于Fe3O4 纳米颗粒修饰膜固定尿素酶与谷脱氢酶的尿素传感器

将Fe3O4纳米粒子吸附于涂有壳聚糖(CH)膜的铟锡氧化物导电玻璃(ITO)上,获得Fe3O4纳米粒子-壳聚糖膜修饰电极,再将脲酶(Ur)和谷氨酸脱氢酶(GLDH)通过静电吸附固定在复合物膜上制备了尿素传感器.运用红外光谱、电子显微镜对传感膜的结构进行了表征;以制备的双酶电极为工作电极,采用微分脉冲伏安法研究了酶电极对尿素的响应,结果表明Ur-GLDH/CH-Fe3O4/ITO生物电极的峰电流对尿素非常敏感,尿素的质量浓度与峰电流分别在5 ～40 mg/L和60 ～100 mg/L范围内呈线性相关,检出限为0.5 mg/L .固定酶的米氏常数Km为0.56 mmol/L,该值较小,表明混合酶(Ur-GLDH)和尿素具有较好的亲和性.在CH-Fe3O4膜中,Fe3O4纳米粒子的引入增加了壳聚糖膜的表面积,增强了电极的电子传递;CH具有生物相容性,有利于保持生物酶活性.     

Fe3O4/壳聚糖复合纳米粒子吸附剂的制备及其对Pb2+吸附性能

用乙二醇为溶剂,三氯化铁和尿素为起始反应试剂,柠檬酸为粒子表面修饰剂,通过一步溶剂热法制备Fe3 O4纳米粒子,然后以一定浓度配比的Na2 SO4与NaOH混合液为沉淀剂,通过沉淀聚合法制备Fe3 O4/壳聚糖复合纳米粒子吸附剂。利用X射线衍射仪(XRD)、红外光谱(IR)、透射电子显微镜(TEM)和物理特性测试仪(PPMS)表征样品的结构、形貌和磁性能,并使用原子吸收分光光度计(AAS)评价吸附剂对Pb2+的吸附去除性能。结果表明,Fe3O4/壳聚糖复合纳米粒子吸附剂是由磁性Fe3O4纳米球形粒子和鱼卵状壳聚糖纳米粒子聚集体复合而成,该吸附剂对Pb2+有很好的吸附去除性能,它对Pb2+的等温吸附线符合Langmuir模型,在温度298k和pH值5时,吸附剂对Pb2+的饱和吸附量为105.5mg/g。     

基于Fe_3O_4-Au磁性纳米粒子及碳纳米管修饰电极的对氧磷生物传感器研究

采用化学共沉淀技术制备磁性Fe3O4-Au纳米粒子复合物(Fe3O4-AuNPs),并以此磁性纳米复合物和碳纳米管(CNTs)构建用于快速检测对氧磷的乙酰胆碱酯酶(AChE)生物传感器。通过磁力作用将Fe3O4-AuNPs纳米粒子固定在自制的磁铁/玻碳电极(MGCE)上,并以此作为AChE的载体。分别通过X射线衍射、振动样品磁强和透射电镜表征了磁性纳米粒子复合物Fe3O4-AuNPs的成分、磁性及其形貌特征。利用电化学交流阻抗(EIS)、循环伏安法和微分脉冲伏安法(DPV)表征了自制的MGCE修饰电极以及生物传感器(AChE/Fe3O4-AuNPs/CNTs/MGCE)的电化学特征,建立了用该生物传感器微分脉冲伏安法检测对氧磷的方法。在最佳实验条件下,酶抑制率与对氧磷浓度的对数在3.6×10-6~2.9×10-2mol/L范围内呈线性关系,检出限为1.6×10-7mol/L。用提出的方法对实际水样中的对氧磷进行加标回收实验,回收率为98.0%~107%。     

磁性纳米粒子固定辣根过氧化物酶的生物传感器

利用FeSO4与FeCl3合成了磁性Fe3O4纳米粒子,并进一步利用3-氨丙基-3-乙氧基硅烷(APS)和戊二醛溶液将辣根过氧化物酶共价固定于该磁性纳米粒子表面,研究了该磁性颗粒的磁学性能,通过磁力将其修饰于固体石蜡碳糊电极表面制成了酶修饰电极。考察了该传感器对H2O2的电化学响应。该生物传感器可对H2O2进行测定,线性范围为1.2×10-7~8.3×10-5mol/L;检出限为4.5×10-8mol/L。利用磁性纳米粒子所制得的酶修饰电极具有催化性能高、稳定性好、造价低和修饰层易更新等优点,有望得到更多的实际应用。     

A Reagentless Amperometric Immunosensor for Alpha‐Fetoprotein Based on Gold Nanoparticles/TiO2 Colloids/Prussian Blue Modified Platinum Electrode

A novel reagentless amperometric immunosensor for the determination of alpha‐fetoprotein (AFP) was prepared by immobilizing TiO₂ colloids on Prussian blue (PB) modified platinum electrode, which yielded a positively charged interface with strong adsorption to deposit gold nanoparticles for immobilization of alpha‐fetoprotein antibody (anti‐AFP). The factors influencing the performance of the proposed immunosensors were studied in detail. Under the optimized conditions, cyclic voltammograms determination of AFP showed a specific response in two concentration ranges from 3.0 to 30.0 ng/mL and from 30.0 to 300.0 ng/mL with a detection limit of 1.0 ng/mL at a signal‐to‐noise ratio of 3. The proposed immunosensor exhibited high selectivity, good reproducibility, long‐term stability (>2 months) and good repeatability.     

基于碳纳米管修饰玻碳电极的唾液sIgA可再生免疫传感器

将壳聚糖(CHI)分散的羧基化多壁碳纳米管(MWCNT)吸附到玻碳电极(GCE)表面,形成负电荷界面,利用静电吸附和金-氮(Au-N)、金-硫(Au-S)共价键作用将阳离子电子媒介体硫堇(THI)和纳米金颗粒(GNPs)层层自组装到电极表面,通过纳米金单层吸附唾液分泌性免疫球蛋白A(sIgA),最后用辣根过氧化物酶(H...     

基于纳米银与有机多孔材料/纳米金修饰的甲胎蛋白免疫传感器研究

在金电极表面电沉积银为氧化还原探针,利用有机多孔材料(PTC-NH2)、纳米金(nano-Au)固载甲胎蛋白抗体(anti-AFP),制备出用于检测甲胎蛋白(AFP)的安培型免疫传感器。通过交流阻抗技术、循环伏安法研究了电极的电化学特性,考察了孵育时间、测试液pH值等实验条件对传感器性能的影响,并利用扫描电子显微镜(SEM)对电极的修饰过程进行了表征。该传感器对AFP有良好的电流响应,线性范围分别为1.0～20.0ng/mL和20.0～60.0 ng/mL,检测限为0.6 ng/mL。     

A sensitive amperometric immunosensor for alpha-fetoprotein based on carbon nanotube/DNA/Thi/nano-Au modified glassy carbon electrode

A novel amperometric immunosensor for the determination of alpha-fetoprotein (AFP) was constructed using films of multi-wall carbon nanotubes/DNA/thionine/gold nanoparticles (nano-Au). Firstly, multi-wall carbon nanotubes (MWCNT) dispersed in poly(diallydimethlammonium chloride) (PDDA) were immobilized on the nano-Au film which was electrochemically deposited on the surface of glassy carbon electrode. Then a negatively charged DNA film was absorbed on the positively charged PDDA. Subsequently, thionine was attached to the electrode via the electrostatic interaction between thionine and the DNA. Finally, the nano-Au was retained on the thionine film for immobilization of AFP antibody (anti-AFP). The modification process was characterized by cyclic voltammetry (CV) and scanning electron microscope (SEM). The factors possibly influenced the performance of the proposed immunosensors were studied in detail. Under optimal conditions, the proposed immunosensor exhibited good electrochemical behavior to AFP in a two concentration ranges: 0.01–10.0 and 10.0–200.0 ng/mL with a relatively low detection limit of 0.04 ng/mL at three times the background noise. Moreover, the selectivity, repeatability and stability of the proposed immunosensor were acceptable.     

Biomolecule‐Doped Organic/Inorganic Hybrid Nanocomposite Film for Label‐Free Electrochemical Immunoassay of α‐1‐Fetoprotein

A new electrochemical immunosensor for the detection of α‐1‐fetoprotien (AFP) was developed based on AFP antibody (anti‐AFP)‐functionalized organic/inorganic hybrid nanocomposite membrane. To fabricate such a hybrid composite membrane, 3,4,9,10‐perylenetetracarboxylic acid‐bound thionine molecules (PTCTH) were initially doped into titania colloids (TiO₂), and then gold nanoparticles and anti‐AFP were immobilized onto the composite film in turn. Comparison with the electrode fabricated only with thionine not 3,4,9,10‐perylenetetracarboxylic acid, the immunosensor with PTCTH exhibited high sensitivity and fast electron transfer. The presence of gold nanoparticles provided a good microenvironment for the immobilization of biomolecules, enhanced the surface coverage of protein, and improved the sensitivity of the immunosensor. The modified process was characterized by scanning electron microscope (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The surface topography of the membrane was investigated by scanning electron microscopy (SEM). Under optimal conditions, the proposed immunosensor exhibited a wide linear range from 2.5 to 200.0 ng/mL towards AFP with a detection limit of 0.5 ng/mL (S/N=3). The stability, reproducibility and precision of the immunosensor were acceptable. Comparison with the conventional enzyme‐linked immunosorbent assay (ELISA), the present method did not require more labeled procedures and washing steps. Significantly, the detection methodology provides a promising approach for other proteins or biosecurities.     

基于纳米金与碳纳米管-纳米铂-壳聚糖纳米复合物固定癌胚抗原免疫传感器的研究

采用纳米金(nano-Au)、多壁碳纳米管-纳米铂-壳聚糖的纳米复合物(MWNT-Pt-CS)及电子媒介体硫堇(Th)固载抗体制得高灵敏癌胚抗原免疫传感器．首先, 于壳聚糖溶液中用NaBH4还原H2PtCl6, 并将多壁碳纳米管分散于其中制得碳纳米管-纳米铂-壳聚糖纳米复合物, 并将其滴涂在玻碳电极上成膜; 然后, 吸附电子媒介体硫堇制得硫堇/碳纳米管-纳米铂-壳聚糖(Th/MWNT-Pt-CS)修饰电极．利用壳聚糖和硫堇分子中大量的氨基固定纳米金并吸附癌胚抗体(anti-CEA); 最后, 用辣根过氧化物酶(HRP)封闭活性位点从而制得高灵敏电流型免疫传感器．在优化的实验条件下, 该传感器响应的峰电流值与癌胚抗原(carcinoembryonic antigen)浓度在0.5～10和10～120 ng/mL的范围内保持良好的线性关系, 检测限为0.2 ng/mL．     

A Label-Free Electrochemical Immunosensor for Clostridium Difficile Toxin B Based on One-Step Immobilization of Thionine in a Silica Matrix

A label-free amperometric immunosensor was fabricated to test clostridium difficile toxin B. Multi-walled carbon nanotubes were modified on the surface of a glassy carbon electrode by electrodeposition. A sol-gel method was developed to encapsulate thionine in an electrochemically induced three-dimensional porous silica matrix by a one-step process. Gold nanoparticle layers were constructed by covalent bonds and electrostatic adsorption with thionine. The clostridium difficile toxin B antibody was immobilized on the gold nanoparticles to construct the immunosensor. Cyclic voltammetry and differential pulse voltammetry demonstrated that the formation of antibody-antigen complexes decreased the peak current of thionine. The morphologies of the nanocomposites were investigated by scanning electron microscopy and ultraviolet-visible spectrometry. The electrode was shown to be sensitive and specific to detect clostridium difficile toxin B from 1.0 to 80.0 ng/mL with a limit of detection of 0.3 ng/mL.     

A label-free electrochemical immunosensor based on gold nanoparticles for detection of paraoxon

An electrochemical immunosensor for the direct determination of paraoxon has been developed based on the biocomposites of gold nanoparticles loaded with paraoxon antibodies. The biocomposites are immobilized on the glassy carbon electrode (GCE) using Nafion membrane. On the immunosensor prepared paraoxon shows well-shaped CV with reduction and oxidation peaks located −0.08 and −0.03 mV versus SCE, respectively. The detection of paraoxon performed at −0.03 mV is beneficial for guaranteeing sufficient selectivity. The amount of the biocomposite consisting gold nanoparticles loaded with antibodies and the volume of Nafion solution used for fabricating the immunosensor have been studied to ensure sensitivity and conductivity of the immunosensor. The immunosensor has been employed for monitoring the concentrations of paraoxon in aqueous samples up to 1920 μg l⁻¹ with a detection limit of 12 μg l⁻¹.     

A Novel Amperometric Immunosensor for Phytohormone Abscisic Acid Based on In Situ Chemical Reductive Growth of Gold Nanoparticles on Glassy Carbon Electrode

Abstract

An amperometric immunosensor for phytohormone abscisic acid was developed based on in situ chemical reductive growth of gold nanoparticles on glassy carbon electrode. First, an approximate 10 nm gold layer was sputtered uniformly onto the electrode surface, and then gold nanoparticles were grown directly on the gold layer for antibody adsorption by immersing the electrode into the H₂AuCl₄ solution. Determination was based on an enzyme-linked competitive immunoreaction between free and enzyme-labeled abscisic acid to bind on immobilized antibody on electrode. The linear response was from 10 ng/ml to 10 µg/ml with a detection limit of 5 ng/ml.