Synthesis and molecular structures of heptafluoroisopropylated fullerenes: C60(i-C3F7)8, C60(i-C3F7)6, and C60(CF3)2(i-C3F7)2

One isomer of C₆₀(i-C₃F₇)₈, three isomers of C₆₀(i-C₃F₇)₆, and the first mixed perfluoroalkylated fullerene, C₆₀(CF₃)₂(i-C₃F₇)₂, have been isolated by HPLC from a mixture prepared by reaction of C₆₀ with heptafluoroisopropyl iodide in a glass ampoule at 260-290 °C. The molecular structures of the four new compounds have been determined by means of X-ray single crystal diffraction partially also by use of synchrotron radiation. Theoretical calculations at the DFT level of theory have been employed to rationalize the energetics of isomers and of C₆₀-R_f binding.     

High-temperature and photochemical syntheses of C60 and C70 fullerene derivatives with linear perfluoroalkyl chains

New experimental results on perfluoroalkylation of C₆₀ and C₇₀ with the use of R_fI (R_f = CF₃, C₂F₅, n-C₃F₇, n-C₄F₉, and n-C₆F₁₃), along with a critical overview of the existing synthetic methods, are presented. For the selected new fullerene (R_f)_n compounds we report spectroscopic, electrochemical and structural data, including improved crystallographic data for the isomers of C₇₀(C₂F₅)₁₀ and C₆₀(C₂F₅)₁₀, and the first X-ray structural data for the dodecasubstituted perfluoethylated C₇₀ fullerene, C₇₀(C₂F₅)₁₂, which possesses unprecedented addition pattern.     

Solubility of trans-Co2(CO)6 [3,5-bis(CF3)C6H3P(i-C3H7)2] in dense carbon dioxide

The title compound (1) was prepared by the reaction of 3,5-bis(CF₃)C₆H₃P(i-C₃H₇)₂ (L1) and Co₂(CO)₈. Its solubility in supercritical carbon dioxide was measured at varying temperatures and pressures using a modified analytical extraction device. Solubility data were determined in the temperature and pressure ranges between 40 and 70 °C and between 100 and 300 bar, respectively. The solubility of 1 is lower compared to (p-CF₃C₆H₄)₃P, but much higher than for transition metal complexes bearing phosphines without fluorinated substituents.     

Vibrational and calorimetric study of phase transitions in n-C6F14 and n-C8F18 crystals

Heat capacities of n-perfluorohexane and n-perfluorooctane were measured from 4.2 K to room temperature. One solid—solid transition is found for n-C₆H₁₄,two for n-C₈F₁₈. Spectra show that the molecules have the same conformations in the two forms of n-C₆F₁₄. Several isomers are present in the high-temperature forms of n-C₈F₁₈;thus transitions in this compound have order—disorder character.     

Isolation of C60(CF3)n (n = 2, 4, 6, 8, 10) with high compositional purity

The high temperature reaction of C₆₀ with silver(I) trifluoroacetate followed by 500 °C sublimation and subsequent HPLC purification has led to the isolation of the five trifluoromethyl[60]fullerenes C₆₀(CF₃)_n (n=2, 4, 6, 8, 10). Four of them have >90% compositional purity. Two of the compounds, C₆₀(CF₃)₄ and C₆₀(CF₃)₆, were obtained as C₁-symmetry isomers with >90% isomeric purity, and a sample of C₆₀(CF₃)₂ also contained ca. 15-20% of a C_s-symmetry isomer of C₆₀(CF₃)₄. The new compounds were characterized by IR and EI mass spectrometry (all five compounds), NMR spectroscopy (C₆₀(CF₃)₂, C₆₀(CF₃)₄, and C₆₀(CF₃)₆), and 2D COSY NMR spectroscopy (C₆₀(CF₃)₄ and C₆₀(CF₃)₆). Calculations at the AM1 and DFT levels of theory have led to the prediction of the most likely structures for C₆₀(CF₃)₂, C₁-C₆₀(CF₃)₄, C_s-C₆₀(CF₃)₄, and the two most likely structures of C₁-C₆₀(CF₃)₆.     

Unusual stabilization of cationic “M(η-allyl) (M = Pt, Pd) units by a dianionic cis-{Pt(C6F5)2(CCSiMe3)2} fragment

Chloride abstraction from [{M(η³ --- C₃H₅)Cl}_n] (M = Pt, n = 4 or M = Pd, n = 2) by (NBu₄)₂[cis-Pt(C₆F₅)₂(CCSiMe₃)₂] (1) gives rise to novel homo- and hetero-dinuclear zwitterionic derivatives (NBu₄) [{cis-Pt(C₆F₅)₂(CCSiMe₃)₂}M(η³-C₃H₅)] (M = Pt 2; M = Pd 3) which are formed by a M(η³-allyl)⁺ unit attached to both alkynyl ligands of the {cis-Pt(C₆F₅)₂(CCSiMe₃)₂}²⁻ fragment. The structure of 3 has been established by X-ray diffraction.     

Isobutene-isoprene copolymerization initiated by [Cp∗MMe2][(n-C18H37E)B(C6F5)3] (M = Ti, Hf; E = O, S) and related compounds

The highly electrophilic borane B(C₆F₅)₃ reacts with e.g., n-octadecanol (n-C₁₈H₃₇OH) and n-octadecanethiol (n-C₁₈H₃₇SH) to form equilibrium mixtures of the reactants and their 1:1 adducts (n-C₁₈H₃₇EH)B(C₆F₅)₃ (E = O, S). The latter are acidic, and react with Cp∗MMe₃ (M = Ti, Hf) in polar and non-polar solvents to give methane and the unstable complexes [Cp∗MMe₂][(n-C₁₈H₃₇E)B(C₆F₅)₃]. The latter are very good initiators for the copolymerization of isobutene with isoprene at relatively high temperatures, giving high conversions to high molecular weight isobutene-isoprene copolymers. The weight average molecular weights are unusually high for the temperatures used, consistent with current theories of the role of weakly coordinating anions. The effects of changing the substituents on the alcohols are also investigated.     

Reaction of C60 with KMnF4 : Isolation and characterization of a new isomer of C60F8 and re-evaluation of the structures of C60F7(CF3) and the known isomer of C60F8

The volatile fluorofullerene products of high-temperature reactions of C₆₀ with the ternary manganese(III, IV) fluorides KMnF₄, KMnF₅, A₂MnF₆ (A⁺ = Li⁺, K⁺, Cs⁺), and K₃MnF₆ were monitored as a function of reaction temperature, reaction time, and stoichiometric ratio by in situ Knudsen-cell mass spectrometry. When combined with fluorofullerene product ratios from larger-scale (bulk) screening reactions with the same reagents, an optimized set of conditions was found that yielded the greatest amount of C₆₀F₈ (KMnF₄/C₆₀ mol ratio 28-30, 470 °C, 4-5 h). Two isomers of C₆₀F₈ were purified by HPLC, one of which has not been previously reported. Quantum chemical calculations at the DFT level combined with 1D and 2D ¹⁹F NMR, FTIR, and FT-Raman spectroscopy indicate that the C₆₀F₈ isomer previously reported to be 1,2,3,8,9,12,15,16-C₆₀F₈ is actually 1,2,3,6,9,12,15,18-C₆₀F₈, making it the first high-temperature fluorofullerene with non-contiguous fluorine atoms. The new isomer, which was found to be 1,2,7,8,9,12,13,14-C₆₀F₈, is predicted to be 5.5 kJ mol⁻¹ more stable than 1,2,3,6,9,12,15,18-C₆₀F₈ at the DFT level. In addition, new DFT calculations and spectroscopic data indicate that the compound previously isolated from the high-temperature reaction of C₆₀ and K₂PtF₆ and reported to be 16-CF₃-1,2,3,8,9,12,15-C₆₀F₇ is actually 18-CF₃-1,2,3,6,8,12,15-C₆₀F₇.     

UV photolysis of n-C3F7I. Radiative lifetime of metastable iodine atoms

The photolysis of n-C₃F₇I and C₂F₅I has been studied with a frequency doubled dye laser at fixed frequency in the UV by detection of time resolved resonance fluorescence of the metastable iodine formed. The rate coefficient for quenching of I(²P_{$\text{1}\text{2}$}) by n-C₃F₇I has been obtained as k = (4.6 ± 0.3) × 10^?17 cm³ molecule_?1s_?1. This value is by more than an order of magnitude lower than published values. Further proof is given for the value of the radiative lifetime of the metastable atoms which was obtained recently by this experimental method. This answers questions raised by Husain et al. on this subject in this journal.     

Structural investigations on new iron-acyl derivatives of B(C6F5)3

Reactions between [Fe(η-C₅H₅)(MeCO)(CO)(L)], L = PPh₃ (1), PMe₃ (2), PPhMe₂ (3), PCy₃ (4), CO (5), and B(C₆F₅)₃ give new complexes [Fe(η-C₅H₅){MeCOB(C₆F₅)₃}(CO)(L)] L = PPh₃ (7), PMe₃ (8), PPhMe₂ (9), PCy₃ (10), CO (11), where B(C₆F₅)₃ coordinates selectively to the O-acyl groups. Hydrolysis of 7 gives [Fe(η-C₅H₅){HOB(C₆F₅)₃}(CO)(PPh₃)] (6). The X-ray structures of 6, 8 and 11 have been determined. Calculations, using density functional theory, demonstrate that the charge transfer to the acyl group on Lewis acid coordination is more significant in the σ than the π system. Both effects lead to a lengthening of the acyl C-O bond thus π populations cannot be inferred from the distance changes.     

Molecular structure and IR absorption spectra of perfluorinated aldehyde hydrates (n-CxF2x+1CH(OH)2, x = 1-4)

Structures and IR absorption spectra of the conformational isomers of perfluorinated aldehyde hydrates, n-C_xF_2x+1CH(OH)₂, (x = 1-4) have been calculated using density functional theory (DFT) and compared to experimental FT-IR measurements. Two absorption peaks around 3600-3700 cm⁻¹ were observed and are assigned to OH stretching modes of OH groups with, and without, intramolecular hydrogen bonding. For n-C₃F₇CH(OH)₂, two absorption bands around 900-1000 cm⁻¹ were observed in the experimental spectra, whereas only a single in-phase stretching mode of the (CF₃)(C₂F₄CH(OH)₂) and (C₃F₇)(CH(OH)₂) bonds was calculated for each conformer. The experimental spectra were well described by composite spectra of the thermal equilibrium mixture of different conformational isomers of n-C_xF_2x+1CH(OH)₂ calculated by DFT.     

Understanding the role of an easy-to-prepare aldimine-alkyne carboamination catalyst, [Ti(NMe2)3(NHMe2)][B(C6F5)4]

A series of reactivity studies of the carboamination pre-catalyst [Ti(NMe₂)₃(NHMe₂)][B(C₆F₅)₄] as well as the preparation of other catalysts are reported in this work. Treatment of [Ti(NMe₂)₃(NHMe₂)][B(C₆F₅)₄] with the aldimines Ar′NCHtol (Ar′ = 2,6-Me₂C₆H₃, tol = 4-MeC₆H₄), and depending on the reaction conditions, results in isolation of [Me₂NCHR′][B(C₆F₅)₄] (1) or (Me₂N)₂CHtol, as well as the asymmetric titanium dimer [(Me₂N)₂(HNMe₂)Ti(μ₂-N[2,6-Me₂C₆H₃])₂Ti(NHMe₂)(NMe₂)][B(C₆F₅)₄] (2). Protonation of CpTi(NMe₂)₃ and Cp^∗Ti(NMe₂)₃ results in isolation of the salts, [CpTi(NMe₂)₂(NHMe₂)][B(C₆F₅)₄] (3) and [Cp^∗Ti(NMe₂)₂(NHMe₂)][B(C₆F₅)₄] (4), respectively. Treatment of compounds 3 or 4 with H₂N[2,6-ⁱPr₂C₆H₃] results in formation of the imido salts [CpTi(N[2,6-ⁱPr₂C₆H₃])(NHMe₂)₂][B(C₆F₅)₄] (5) (58% yield) or [Cp^∗Ti(N[2,6-ⁱPr₂C₆H₃])(NHMe₂)₂][B(C₆F₅)₄] (6). When Ti(NMe₂)₄ is treated with [Et₃Si][B(C₆F₅)₄], the salt [Ti(NMe₂)₃(N[SiEt₃]Me₂)][B(C₆F₅)₄] (7) is obtained, and treatment of the latter with [2,6-ⁱPr₂C₆H₃]NCHtol produces the imine adduct [Ti(NMe₂)₃(κ¹-[2,6-ⁱPr₂C₆H₃]NCHtol)][B(C₆F₅)₄] (8). The carboamination catalytic activity of complexes 2-7 was investigated and compared to [Ti(NMe₂)₃(NHMe₂)][B(C₆F₅)₄]. Likewise, a proposed mechanism to the active carboamination catalyst stemming from [Ti(NMe₂)₃(NHMe₂)][B(C₆F₅)₄] is described.     

X-ray crystal structures and solution dynamics of sodium organofluorotitanates [Na{Ti2(C5Me5)2F7}] and [NaTi6(C5Me5)5F20(H2O)]·(THF)

[Na{Ti₂(C₅Me₅)₂F₇}] (1) was prepared from sodium fluoride and [{Ti(C₅Me₅)F₃}₂] [H.W. Roesky, et al., Angew. Chem. Int. Ed. Engl. 31 (1992) 864-866]. The solid-state 1 consists of a polymeric chain of two rows of dititanate anions [Ti₂(C₅Me₅)₂F₇]⁻ connected by sodium ions in the middle of the chain. Each sodium ion is coordinated by five fluorine atoms from three [Ti₂(C₅Me₅)₂F₇]⁻ anions. The variable-temperature ¹⁹F NMR of CD₃CN solution of 1 revealed interconversions of monomeric species [Na(CD₃CN)_n{Ti₂(C₅Me₅)₂F₇}] (1solv) with different number of CD₃CN ligands on the sodium ion. The addition of HMPA to the CD₃CN solution of 1 allows ¹⁹F NMR observation of 1·HMPA (1a) and 1·HMPA·CD₃CN (1b) in the slow exchange. The solid-state structure of [NaTi₆(C₅Me₅)₅F₂₀(H₂O)]·(THF) (2·THF) reveals the sodium ion coordinated by four fluorine atoms from the anion [Ti₂(C₅Me₅)₂F₇]⁻ and by three fluorine atoms from the cluster [Ti₄(C₅Me₅)₃F₁₃(H₂O)].     

Theoretical study of [Hg3(o-C6F4)3]n · {benzene} (n = 1, 2) complexes

The electronic structure and spectroscopic properties of [Hg₃(o-C₆F₄)₃]_n · {benzene} (n = 1, 2) were studied at the HF, MP2 and PBE levels. The interaction between [Hg₃(o-C₆F₄)₃] and benzene at the HF and MP2 levels was analyzed. Secondary π-interactions (Hg–benzene) were found to be the main contribution short-range stability in the [Hg₃(o-C₆F₄)₃] · {benzene} complex. At the MP2 and PBE levels equilibrium Hg–C distances of 338.4 and 361.4 pm; and interaction energies of 46.6 and 29.2 kJ/mol were found, respectively. The absorption spectra of these complexes were calculated by the single excitation time-dependent method at PBE level.     

Reactions of [Pd(C6F5)2(CNR)2] with [PdCl2(NCPh)2]. Insertion of p-MeC6H4NC into Pd-C6F5 bonds

[Pd(C₆F₅)₂(CNR)₂] (R = Cy, Bu^t, p-MeC₆H₄ (p-Tol)) react with [PdCl₂(NCPh)₂] to give [Pd₂(μ-Cl)₂(C₆F₅)₂(CNR)₂]. In refluxing benzene insertion of isocyanide into the C₆F₅Pd bonds occurs only for R = p-Tol, to give a imidoyl bridged polynuclear complex cis-[Pd₂ (μ-Cl)₂[μ-C(C₆F₅) = N(Tol-p)]_2n]. This complex reacts with (a) Tl(acac) to give [Pd₂{μ-C(C₆F₅) = N(Tol-p)}₂(acac)₂]; (b) neutral monodentate ligands to afford dimeric complexes [Pd₂{μ-C(C₆F₅) = N(Tol-p)}₂Cl₂L₂] (L = NMe₃, py, 4-Me-py, SC₄H₈), and (c) isocyanides to give insoluble complexes of the same composition which are thought to be polymeric, [$\text{Pd}$(CNR)Cl{μ-C(C₆F₅) = $\text{N}$(p-Tol)}]_n (R = p-Tol, Me, Bu^t). Thermal decomposition of cis-[Pd₂ (μ-Cl)₂ [μ-C(C₆F₅) = N( p-Tol)]_2n] gives the diazabutadiene species (p-Tol)NC(C₆F₅)C(C₆F₅)N(p-Tol) in high yield.     

Formation of perfluorinated polyphenylenes by multiple pentafluorophenylation using C6F5Si(CH3)3

Pentafluorophenylation of perfluoroarenes with C₆F₅Si(CH₃)₃ was investigated by using NMR and MALDI-TOF-MS techniques. Successive multiple pentafluorophenylation easily occurred not only on the para-position but also on the ortho-positions to provide perfluorinated p-phenylene and m-phenylene compounds. The perfluoroarenes having electron-withdrawing substituents provided oligo- to poly-(phenylene)s depending on the added amounts of C₆F₅Si(CH₃)₃, while the perfluoroarenes having electron-donor substituents gave H(C₆F₄)_nF polymers produced from C₆F₅H, which was the decomposed product of C₆F₅Si(CH₃)₃.     

Perfluororganozink-verbindungen: darstellung und eigenschaften von (Rf)2Zn-komplexen (Rf = CF3, C2F5, C3F7, C6F5) [1]

A new method for the preparation of bis(perfluoroorgano) zinc compounds is described: CF₃I and C₆F₅I react with dialkylzinc in the presence of a Lewis base quantitatively to give (CF₃)₂Zn and (C₆F₅)₂Zn complexes, while the analogous reactions with C₂F₅I and iC₃F₇I do not yield the pure compounds. ¹H, ¹⁹F n.m.r, i.r. and Raman spectra are presented.     

Formal chromium–chromium triple bonds and bent rings in the binuclear cycloheptatrienylchromium carbonyls (C7H7)2Cr2(CO)n (n = 6, 5, 4, 3, 2, 1, 0): A density functional theory study

Binuclear cycloheptatrienylchromium carbonyls of the type (C₇H₇)₂Cr₂(CO)_n (n = 6, 5, 4, 3, 2, 1, 0) have been investigated by density functional theory. Energetically competitive structures with fully bonded heptahapto η⁷-C₇H₇ rings are not found for (C₇H₇)₂Cr₂(CO)_n structures having two or more carbonyl groups. This result stands in contrast to the related (C_nH_n)₂M₂(CO)_n (M = Mn, n = 6; M = Fe, n = 5; M = Co, n = 4) systems. Most of the predicted (C₇H₇)₂Cr₂(CO)_n structures have bent trihapto or pentahapto C₇H₇ rings and CrCr distances in the range 2.4–2.5 Å suggesting formal triple bonds. In some cases rearrangement of the heptagonal C₇H₇ ring to a tridentate cyclopropyldivinyl or tridentate bis(carbene)alkyl ligand is observed. In addition structures with CO insertion into the C₇H₇–Cr bond are predicted for (C₇H₇)₂Cr₂(CO)_n (n = 6, 4, 2). The global minima found for the (C₇H₇)₂Cr₂(CO)_n derivatives for n = 6, 5, and 4 are (η⁵-C₇H₇)(OC)₂CrCr(CO)₄(η¹-C₇H₇), (η³-C₇H₇)(OC)₂CrCr(CO)₃(η^2,1- C₇H₇), and (η⁵-C₇H₇)₂Cr₂(CO)₄, respectively. The global minima for (C₇H₇)₂Cr₂(CO)_n (n = 3, 2) have rearranged C₇H₇ groups. Singlet and triplet structures with heptahapto η⁷-C₇H₇ rings are found for the dimetallocenes (η⁷-C₇H₇)₂Cr₂(CO) and (η⁷-C₇H₇)₂Cr₂, with the singlet structures being of much lower energies in both cases.     

Synthesis and crystal structure of the double cluster [Cp3Fe4(CO)4(C5H4)]2(p-C6H4)

[Cp₄Fe₄(CO)₄] (1) reacts with p-BrC₆H₄Li and MeOH in sequence to afford the functionalized cluster [Cp₃Fe₄(CO)₄(C₅H₄-p-C₆H₄Br)] (2), while the reaction of 2 with n-BuLi and MeOH produces [Cp₂Fe₄(CO)₄(C₅H₄Bu)(C₅H₄-p-C₆H₄Br)] (3). The double cluster [Cp₃Fe₄(CO)₄(C₅H₄)]₂(p-C₆H₄) (4) has been prepared by treatment of [Cp₄Fe₄(CO)₄] with p-C₆H₄Li₂ and MeOH in sequence. The electrochemistry of 2 and 4, as well as the crystal structure of 4 have been investigated.     

Synthesis and reactivity of [N(C6H4Br)3][B(C6F5)4]: the X-ray crystal structure of [Fe(C5H5)2][B(C6F5)4]

A new chemical oxidant [N(4-C₆H₄Br)₃][B(C₆F₅)₄], was prepared and used to synthesize [Fe(C₅H₅)₂][B(C₆F₅)₄]. The crystal structure of [Fe(C₅H₅)₂][B(C₆F₅)₄] was determined.